GE/BAS-56/2023-24 Special repair to building No P-55 T-24 NP-02 and NP-03 at Basoli under GE Basoli

Amount

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed .

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed ..

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed .

M&L for pressed steel frames for doors/window with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 75 x 50 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed .

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed .

S&F 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided) complete all as specified and directed .

S&F 2nd class hard wood 35mm thick panelled door shutters (two panel) factory made, plain framed, with lock rail and panel of 9mm BWP commercial ply. The size of rail and style as per IS-1003(Part-I) complete all as specified and directed .

S&F 35mm thick, factory made fancy type flush shutter, solid core, construction with block board core and plywood face panel, commercial type on both side one face is covered with decorative face veneer with lipping/frame to match, kiln seasoned and chemically pressure treated complete all as specified and directed .

S&F 18/19mm thick prelaminated decorative choice, printed PVC board(weight not less than 12Kg/Sqm) duly edge bonded with 0.8mm thick PVC taping as in cupboard/Kitchen cabinet shutter complete all as specified and directed .

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed .

S&F factory made solid panel PVC moulded door shutter, 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face & 2mm plain colour PVC sheet on back face supplying & fixing at site as per specification & drawing complete all as specified and directed ..

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, complete all as specified and directed.

S&F Mild steel wire cloth 0.48mm nominal dia of wire and average width of aperture 1.16mm,and fixed with tinned tank or galvanized wire staple complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F 4mm thick Figured glass and glazing with oil putty in square n exc 0.5 sqm in each pane. complete all as specified and directed.

S&F for 100 mm butt hinges, stainless steel complete all as specified and directed

S&F aluminium anodised barrel tower bolts 200 mm long of extruded section fixed with stainless steel screws ,ISI marked, complete all as specified and directed .

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed , complete all as specified and directed .

S&F aluminium anodised handles 150 mm long of extruded section for door fixed with stainless steel screws ,ISI marked, complete all as specified and directed .

S&F 300mm long stainless steel, Mortice lock latch with two levers(vertical type) with handle and two Nos key, complete all as specified and directed .

S&F 100 mm long mild steel hasp and staple stove enameled black with bolts to hinges , complete all as specified and directed .

S&F Floor door stopper 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .

S&F Curtain rod 20mm dia of Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed .

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .

S&F in repair, Continous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap(when open) 30mm complete all as specified and directed .

M&L for preparation of treated/un-treated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

M&L for preparation of treated/un-treated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed .

S&F pre painted Steel Elixir 2000 series windows or euivalent (Base steel as per IS 513 of 0.58 mm thick "D" quaility galvanised as per IS 277 with zinc of 120 GSM primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 micros thick and back coated with 5-7 microns thick alkyd backer section for outer frame should be of 72x75 mm, centre mullion should be of 72x50 mm, section for fixed glass beading should be of 12x12mm and section for shutter for 48x25mm. Outer frame & mullion sections to have rebate for glazed shutters, fit mesh and 20mm provision for guard bars/grills, fly mesh shutter section should be 20x40mm. The sections are to be cut to length mitre joined with corner bracekets. centre mullions to be fixed with mullions cap Elixir or equivalent stay, handles 2 Nos of heavy duty stainless steel pivot hinges shall be provided per shutter. The windows should be paneled with 5mm thick plain float glass and S.S Mesh for fly mesh shutter (304 grade) rubber Gaskets are provided all around the glass. The above frame should be fixed to the concrete/masonary wall by means of self exapnding screws. Including 10mm square guard bars 6" (152.4mm) pitch, complete for finished items of works all as specified and directed. Make:- Eixir Met From Pvt Ltd CAT PART No Elixir 2000 series or equivalent as approved by GE

Ditto as per item No 30, here-in-before but in Ventilators/ single panel windows

Supply and fixing factory made steel windows double shutter/ventilator single shutter box type outer frame made out of ERW tube 'P' section (65mmx45mmx25mm) and shutters of ERW tube 'P’ (50mmx35mmx20mm) openable shutters side hung including pintol hinges with two Nos of MS tower bolts 150mm size on each shutter , steel handle and stopper of ‘Z’ section as specified complete with sash bars with sash bars dovetailed or welded ready for glass fixing and wire guage fixing, steel windows shall be double shutter external glazed and internal wire gauzed complete all as specified and as per drg No CEPZ/TD-324/07 Sh 1/3 to 3/3. Note the quoted rate against the above item shall also include (i) for provision of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of tar on the ends of steel frame in contact with brick/concrete surface (ii) 04 Nos steel lugs of 20mmx5mm MS flat 20cm long over all welded to frame (iii) PCC block for embedding lugs as required.

Material and labour for plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed ..

M&L of treatment with the following specification - Removing existing water proofing treatment and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished all as specified and as directed. NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE. complete all as specified and directed .

M&L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) of uniform thickness , top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed .

M&L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified and directed .

S & F mild steel framed work conforming to Fe-410-O or Fe-310-O as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed .

S & F angle iron steel work conforming to Fe-410-W (Gde E-250 Quality-A or B) or Fe-290 Gde E-165, as in Flat Iron, roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) or any type of Iron steel work required at site including distance pieces, cleats etc complete all as specified and directed .

S & F stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed .

S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm cross tee 25 x 24mm and wall angle 24x24mm, using 8 mm thick ceiling panel laminated with PVC film on front face and foil back availavel in due drop texture as per IS-2095, part-I-1996, fixid in the grid of E-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butter fly clips including dismantling of board of any description complete all as specified and directed.

Taking down eaves gutters and rainwater pipes 100/110 mm dia (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall/floor complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall/floor complete all as specified and directed.

S&F PVC (SWR) Bends in any radius 110 mm bore complete all as specified and directed.

S&F PVC (SWR) Bends in any radius 75 mm bore complete all as specified and directed.

S&F for 110mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement.complete all as specified and directed

S&F PVC (SWR) branch pieces single Y equal or unequal 110 mm bore complete all as specified and directed ..

S&F PVC (SWR) Vent cowl 75 mm bore .complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

S&F in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all complete all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, complete all as specified and directed.

S&F in repairs towel rail 600 mm long of CP fixed with and incl Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed .

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including waste coupling 40 mm dia ,fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed .

S & F in repair vitreous China wash down water closet pan (Pedestal pattern), white (EWC) with ‘P’ or ‘S’ trap, including connection to drain or outgoing pipe and all necessary fittings, inlet, outlet pipe connections, and plastic water closet seat cover, closed pattern with recessed bottom cover and mild steel chromium plated hinge and CP jet spray complete all as specified and directed.

S & F in repairs Oval shaped Counter type Vitreous china wash basin, white ,size 450 x 350 mm including waste coupling 32mm size full thread waste pipe. Make -CERA, CAT PART No -S2030102 all as specified and directed

M&L for 75 mm RCC 1:2:4 type ‘B1’ (using 20mm graded crushed stone aggregate) in precast slab for Wash Hand Basin with hole for fixing WHB including necessary forms and reinforcement and moulds etc and set in cement mortar 1:6 complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC , complete all as specified and directed .

S&F in repair water closet (Squat pattern) without lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests including flush pipe, including connectoin to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified and directed

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections complete all as specified and directed.

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections complete all as specified and directed.

M&L cutting chases pinning in brick mas and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth, complete all as specified and as directed.

Refixing of 15mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections complete all as specified and directed.

Refixing of 20mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed .

Demolition cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed .

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing ,dressed stone work and precast concrete article.

M & L brick work with subclass 'B' bricks straight or curved on plan exc 6.0 mean radius built in CM (1:6) complete all as specified and directed.

All as per item No 69 here-in-before, but, except brick complete all as specified and directed.

M & L for half wall brick work with subclass 'B' bricks straight or curved on plan exc 6.0 mean radius built in CM (1:4) complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed .

M&L for 10mm thick rendering/screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed .

M&L for coloured chequered cement conrete tiles 30cm x 30cm x 25mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry as in floor including 75mm thick PCC type C-2 1:3:6, (40mm graded crushed stone aggregate) and 15mm thick cement screed bed or bedding layer in CM 1:4 complete all as specified and directed .

M&L for mirror polishing of old kota stone flooring where user is required to glow high gloss finish complete all as specified and directed .

M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floor dado and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed ..

M&L Single piece Machine cut kota slab flooring/step of stair case 18-20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 10mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes complete all as specified and directed.

M&L Single piece Machine cut kota slab as in skirting/dado/riser of steps etc 18-20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 10mm thick rendering in cm 1:4 for complete all as specified and directed.

M&L for Granite black colour of any type 18-20mm thick machine cut as in cooking plateforms and like in cement mortar ( 1:4 ) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes. complete all as specified and directed

Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform , and other similar situations etc. complete all as specified and directed

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed .

M&L for Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed .

M&L for Rendering 05 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement complete all as specified and directed .

M&L for Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) in two layers (5mm finishing layer over 10mm base layer) finished even and smooth without using extra cement with WPC over finishing layer complete all as specified and directed .

M&L for Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) in two layers (5mm finishing layer over 10mm base layer) finished even and smooth without using extra cement complete all as specified and directed .

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement. complete all as specified and directed .

M&L for Preparing new wall surface including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algae and applying two coats of acrylic , antifungal emulsion exterior weather proof paint on external surfaces complete all as specified and directed .

M&L for Preparing new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed .

S&F in repair 15mm Angle valve/stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe. complete all as specified and directed .

S&F 15mm stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe with long shank chromium plated concealed type.. complete all as specified and directed .

S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed

M&L for concrete bed to drain pipes laid in trenches incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) for 150mm bore of pipe complete all as specified and directed

M&L for Salt glazed stoneware (SGSW) grade'A' drain pipe 150mm bore laid and jointed on concrete bed, including testing and demolition of existing pipe.complete all as specified and directed

M&L for cutting into existing manholes(150mm dia pipe) for connecting new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 complete all as specified and directed

M & L Precast cement concrete type B-1, 1:2:4 (20mm graded) aggregate as in manhole cover including necessary form work as required complete all as specified and directed.

M & L for cleaning, breaking, loose concrete, cleaning of reinforcement and filling plain cement concrete 1:1 1/2 :3 type B-0 using 12.5mm graded aggregate at places as per direction by E-in-Charge (the cost of scafoldings, formworks deemed to be included in the item) complete all as specified and directed.

M&L 75 mm thick PCC, type C-2, 1:3:6, ( using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without nusing extra cement. complete all as specified and directed

M&L 100 mm thick PCC, type B-1, 1:2:4, ( using 20mm graded crushed stone aggregate) as in sub base of floor. complete all as specified and directed

M&L for Coloured Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade including 50 mm thick sand cushioning complete all as specified and directed

M&L Preparation of new plastered surfaces and applying two coats of distemper oil emulsion over and including 3mm thick wall care putty on plastered surfaces. complete all as specified and directed

M&L For Preparing New plastered surfaces and Applying two coat of cement based paint over a coat of primer on walls complete all as specified and directed..

Supply only liquid Water Proofing Compound. complete all as specified and directed

Material and labour for plain cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in drains or surface channels finished even and fair including demolition of existing PCC of any description complete, all as specified and directed.

Material and labour for preperation of new untreated steel surface and applying two coats of synthetic enamel paint complete, all as specified and directed.

Excavation in trenches in any type of soil n.exc 1.50m wide and n. exc 1.50m in depth for foundation of pole/stay and laying of UG Cable and other and getting out complete all as specified and directed.

Removal of excavated (soil) material to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spereading, leveling, watering and well ramming in layers not exc 25cm thick each complete all as specified and directed

Supply,laying and testing cable XLPE insulated,screened,PVC bedded galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 core including takingout existing complete all as specified and directed..

Supply and fix for DWC high density polythylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the wall conforming to IS : 14930 (Part-I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fitting as required complete all as specified and directed.

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings laying in trenches complete all as specified and directed

S&F of 25mm dia bore steel water GI tubes medium grade with all fittings laying in trenches complete all as specified and directed

Suppy and fix gate valve 20mm dia gun metal gate valve conforming to IS with iron wheel head screwed both ends for iron pipe complete all as specified and directed..

Suppy and fix gate valve 25mm dia gun metal gate valve conforming to IS with iron wheel head screwed both ends for iron pipe complete all as specified and directed..

Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed.

Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with pressed mild steel terminal boxes(sheet not less than 1.6 mm thick) duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge.Note: a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc complete all as per specified and directed.

All as per item No 117 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed.

All as per item No 117 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed.

All as per item No 117 but for one bell/buzzer point control by one switch complete all as per specified and directed.

Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as per specified and directed.

Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as per specified and directed.

Supplying & Fixing switch piano flush button single pole one way 15 amps 230 volts, complete all as per specified and directed.

Supplying & Fixing fan regulator electronic flush type stepped (rotary type) with 5 steps speed control complete all as per specified and directed.

Supplying & Fixing electric bell multi music type AC single phase 220 volts, complete all as per specified and directed.

Supplying & Fixing Switch Bell push, flush type, 5 amp one way, complete all as per specified and directed.

Supplying & Fixing socket out let, 5 pin, 5 amps, 230 volts, complete all as per specified and directed.

Supplying & Fixing socket out let, 6 pin, 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts, complete all as per specified and directed.

Supplying & Fixing switch socket combination, 2 in 1 , 5 pin, 5 amps, 230 volts, complete all as per specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.

S&F ceiling rose surface bake lite two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.

Supply and fix LED lamp 9 watt , complete all as specified and directed.

M&L 20 watt LED Street light/ Bldg Security light fitting of IP-66 protection, pressure die cast aluminium housing with epoxy powder coated finish having polycarbonate cover with all accessories pre-wired with and including light grade GI pipe bracket for fixing on pole/ angle iron bracket for fixing on wall as required & connecting up with three core flexible copper conductor cable of size 1.0 Sqmm complete all as specified and directed

S&F Wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver, 20 Watt LED fitting with 100 lumen/watt 6000k, 230Volts, diffused optics etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round block and testing complete all as per specified and directed.

S&F Wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver, 10 Watt LED fitting with 100 lumen/watt 6000k, 230Volts, diffused optics etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round block and testing complete all as per specified and directed.

Supply and fixing wall mounted LED bulk head fittings, 10 watt, warm white,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with three core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as per specified and directed.

Supply and fix single pole and neutral enclosurewith a two pin and earth plugand socket with single pole, 230v MCB 20Amp complete all as specified and directed.

S&F MCB SP 6-32 Amps with 10KA breaking capacity of c series in distribution board complete all as per specified and directed.

S&F MCB SPN 63 Amps with 10KA breaking capacity of c series in distribution board complete all as per specified and directed.

S&F MCB TPN 63 Amps with 10KA breaking capacity of c series in distribution board complete all as per specified and directed.

S&F MCBs single pole and neutral (SPN)/isolator 40 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) distribution board for MCB provisions 230Volt, 50Hz AC supply for 08 way. fitted with copper bus bar rated 100amps, neutral link , earth bar complete all as per specified and directed.

S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) distribution board for MCB provisions 230Volt, 50Hz AC supply for 04 way. fitted with copper bus bar rated 100amps, neutral link , earth bar complete all as per specified and directed.

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as per specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Supply and Fix steel body Exhaust Fan 230 volts 300 mm sweep 50 Hz, with louvers complete all as specified and directed

Supply ,fixing and testing water heater storage type with multifunctional safety valve,electric operated 230 V,single phase complete including one no of heating element,automatic thermal cut out,flusible plug,anti vacum ,built in presser release valve,thermostat,rust proof powder coated body,indicator lamps and all safety advices as per IS capacity 25 litres, 5 star rating including suitable and making good disturbed surface complete all as specified and directed

Taking down existing ceiling fan with down rod, blade, regulator and all accessories and fixing the same after copper rewinding and services to fan to make in serviceable condition complete all as specified and directed.

S&F in replacement sheet metal powder coated VTPN DB double door 4 way with and including MCCB 63 amps, 415 Volts, 50 Hz AC 16 ka 4 pole with copper bus bar rated 200 amps neutral link, earth bar and din rail for fixing the MCB,s complete all as per specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthling wire.)

BALKRISHAN GUPTA AND SONS

Om Sai Ram Builders

Amrik Construction co

Malpotra Enterprises