Providing 9mtr Road Side LED Street Light With Pole Premises Umra Tanda at, UMRA Tq.PATHRI, Dist.Parbhani (Under Vasantrao Naik Tanda Vasti Sudhar Yojana, 2025-26)

Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. X 0.25 mm dia.) 3 core flexible multi stranded copper industrial calble for voltage grade up to 1.1 KV

Supplying and erecting integrated LED street light fitting 100 -110 W IP65 & IK08 class having single plece pressure die-cast aluminium housing, having system lumens output of Min13000 lumens,min.efficacy of 110 lumen/W, CRI>70 CCT upto 6500K, THD 0.95,operating range of 140-270V inbuilt surge protection of 10 KV life class of 50,000 Hrs at L70B50 etc.

Supplying and erecting single phase ,240V ,street light control panel up to the max load of 6kv SPN MCB 40A, powder coated CRCA 14 SWG sheet outdoor type having IP54,IK10 protection,suitable rating contactor 24 hrs.astronomic time switch with minimum 5 years battery back up etc.

Supplying erecting and marking SPMCB 6A to 32A C-series with rated short-circuit breaking capacity (Icn) 10kA in provided distribution board etc.

Supplying and erecting and terminating FR XLPE insulated,galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 6 sq.mm aluminium conductor complete erected with glands and lugs, on wall/ trusses/pole or laid in provided trenches/ pipe as per se[ppcifixcation No.CB-LT/AL

Supplying and laying (including excavation of suitable width and depth up to 90 cm) 50 mm outside dia.double wall corrugated pipes (DWC) of HDPE for enclosing cable below gound/road suface to required depth complete.

Providing and erecting 7 m high (Clear Height galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mmm A/F on provided foundation as per specification No.

Providing nd erecting galvanised 1000 mm double arm sword type bracket with FRP dome nand ball etc.

Providing pipe type earthing with 40 mm dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results etc.

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.