Installation of one high mast light at Gram Samaj Senior Secondary School Lodha

S/F Of 20 mtr High Mast Shaft Of pproved Make(utkarsh/Mayfair/mactac) With rising system hot dip glavanized inside &out side dip, having pole sheet thickness 4mm.Top dia minimum 150mm,Bottom dia 410mm base plate 32mm thick suitable for wind velicity as per as par is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5hp power tool motor ,3 point suspesion system with steel wire rope 8mm dia ,double drum winch ,including making sutable foundation as per manufacture drawing /site reument along with foundation bolts ,nuts ,washers,anchor plates ets complete in all respect [ Item No 653] SOR 2018

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. CAT.AAA (SOR - 2018 Item no.1455

Supply and Wiring of submains with 4 nos. of 4 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductorcable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge (SOR - 2018 Item no.289(C)

S/F Of Following capacity of automatic street light cubicle control pannal with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses isolating swtichmateringinstument and instument box with cts etc. in case of TPN,(15ATPN) complete in all respect, (SOR -2018 Item no.807(d) (ii)

Supply and burring of Safe Earthing Electrode T-19 Cu Copper Coated, Length 2000mm, outer pipe 48.4mm x 3.2mm, inner pipe 26.9mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25 x 3 Copper Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. (SOR -2018 Item no.727(a)

S/F of following size DWC HDPE pipe ISI marked along with all accessories like socket bend, coppers etc. confirming to is 1493 part-11 complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level), including excavation refilling the trenches but excluding sand cushioning and protective covering at complete as required 63 mm dia (OD)-63mm & 51 mm (ID)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (SOR - 2018 Item no.501 (I) 16 sqmm 4 core

Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm squareC.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in- charge complete in all respects as per drawing. (SOR -2018 Item no.701

Please Enable Macros to View BoQ information