Construction of Office cum Training Institute for Institute of Company Secretaries of India (ICSI) at Hyderabad

GRAND TOTAL OF DSR AND NDSR 8,63,20,312.0

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources)

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2

11 4.10 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal Sqm 35.32 410.85 14509.83

size derived from natural sources)

Extra for providing and mixing water proofing material in cement concrete work in doses by

weight of cement as per manufacturer's specification.

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved

13 4.13 quality using 1.7kg per square metre on damp proof course after cleaning the surface with Sqm 60 146.15 8769.00

brushes and finally with apiece of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-

III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from

14 4.17 natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed Sqm 60 749.3 44958.00

and consolidated and grouted with fine sand, including necessary excavation, levelling &

dressing & finishing the top smooth.

TOTAL (Carried Over to Summary of Civil Works) 395642.67 0.00

C 5 REINFORCED CEMENT CONCRETE WORK

15 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

15.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 90.36 392.15 35434.28

15.2 5.9.2 Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc. Sqm 149.14 842.5 125648.34

15.3 5.9.20 Suspended floors, roofs, landings, balconies and access platform. Sqm 811.15 1028.4 834186.66

15.5 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 917.84 736.4 675897.38

15.6 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 493.64 961.3 474536.13

15.7 5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 130.848 764.95 100092.18

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and

binding all complete upto plinth

16.1 5.22.6 Thermo-Mechanically Treated bars. kg 19143.22 107.85 2064596.36

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and

binding all complete above plinth level.

17.1 5.22.A Thermo-Mechanically Treated bars. kg 54933.18 107.85 5924543.46

Providing and laying in position machine batched and machine mixed design mix M-25 grade

cement concrete for reinforced cement concrete work, using cement content as per approved

design mix, including pumping of concrete to site of laying but excluding the cost of centering,

18 5.33 shuttering, finishing and reinforcement, including admixtures in recommended proportions as

per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing

strength and durability as per direction of Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330 kg/Cum. Excess/less cement used as

per design mix is payable/recoverable separately).

18.1 5.33.1 All works upto plinth level

18.1.1 5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum Cum 183.34 9655.7 1770255.66

18.2 5.33.2 All works above plinth level upto floor V level

18.2.1 5.33.2.2 Concrete of M30 grade with minimum cement content of 350 kg /cum Cum 391.83 10011.35 3922783.31

TOTAL (Carried Over to Summary of Civil Works) 15942503.87 0.00

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

D 6 BRICK WORK

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks

in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4

coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at

every third course of masonry work. Cum 79.48 10195.45 810294.54

Providing and laying autoclaved aerated cement blocks masonry with

150mm/200mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to

20 6.47 floor V level with RCC band at sill level and lintel level with approved block laying polymer

modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of

RCC band and reinforcement shall be made for seperately). Cum 118.19 8333.65 984987.58

TOTAL (Carried Over to Summary of Civil Works) 1795282.12 0.00

SH-8 CLADDING WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished,

machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of

required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4

(1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment,

epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss

finish etc. completeat all levels.

21.1 8.2.2 Granite stone slab colour black, Cherry/Ruby red

Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining

(veneer work) including dado, skirting, risers of steps etc., in required design and pattern

wherever required, stones of different finished surface texture, on 12 mm (average) thick

22 8.11 cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3

kg/sqm including pointing with white cement slurry admixed with pigment of matching shade,

including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as

directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

23 8.3 machine polishing to edge to give high gloss finish etc.complete as per design approved by

Engineer-in-Charge.

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and

24 8.4 drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Extra for providing opening of required size & shape for wash basins / kitchens sink in kitchen

platform, vanity counters and similar location in marble / Granite /stone work including

necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc.

complete. Nos 18 978.7 17616.60

Fabric stretched Acoustic wall panelling system:

Providing and fixing of Acoustic wall Fabric panel system using PVC Grippers to Stretch the

Fabric (Approved Colour & Pattern of Fabric with density of Less than 300 GSM ) as per ASTM E

84 & thermal conductivity 0.034w/mk with desired acoustic management 0.80 NRC. The G.I

frame ( Base Frame after soundproof membrane ) of thickness 0.50 consist of GI metal stud

frame of size 50mm having one flange of 41mm and other of 44mm placed @ every 600 mm c/c

in vertical direction. The MICRONE ( for Sound Insulation - Acoustical Property ) of thickness

50mm and density 40Kg/m3 is fixed in between studs enact with chicken mess ( Purpose to

26 hold the MICRONE to its place firmly ) .On outer side one layer of 12 mm perforated WPC

BOARD ( Water Proof with High Density Board with Acoustical & Soundproofing Properties ) is

screwed. Screw fixing is done mechanically. WPC boards Perforation ( Holes to trap the sound

within to eliminate ECHO 100% ) to be done at site according to technical Specification of

Proposed AV Systems & Equipments . A layer of 1/2" thick Dycrone (Synthetic wool to filter the

sound - hard to soft ) is fixed on the perforated WPC baord to give cushioning to the pannels

and fabric is streched Through PVC Grippers as per design chosen or proposed by Designer /

Architecht or selected by customer of its own

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium

27 8.32 Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the

building , for all heights and all levels etc. including:

Structural analysis & design and preparation of shop drawings for pressure equalisation or rain

(a) screen principle as required, proper drainage of water to make it watertight including checking

of all the structural and functional design.

Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in

pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite

panel material consisting of 3mm thick FR grade mineral core sandwiched between two

Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be

(b) coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of

approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified

using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations

and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor

bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete

required to perform as per specification and drawing The item includes cost of all material &

labour component, the cost of all mock ups at site, cost of all samples of the individual

components for testing in an approved laboratory, field tests on the assembled working curtain

wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with

aluminium composite panel cladding till the handing over of the building for occupation. Base

27.1 (c) frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor

shall provide curtain wall with aluminium composite panel cladding, having all the performance

characteristics all complete , as per the Architectural drawings, as per item description, as

specified, as per the approved shop drawings and as directed by the Engineer-in-Charge.

However, for the purpose of payment, only the actual area on the external face of the curtain

wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in

sqm. up to two decimal places

Providing Thin Porcelain Tiles Material (laminam) as per approved architechtural drawings

,3+mm thickness Structurally reinforced with fibreglass mat attached to the back of a porcelain

slab non-porous, resistant to scratch, moisture, heat, frost , liquid, up to all height obtained by

wet grinding of clayish raw material, granite and metamorphic feldspar containing rocks &

Ceramic Pigments. For all types of substrate flatness must be checked with a 2 m-long

28 NDSR rod,rested on the screed in all directions. The permitted tolerance is 3mm. Providing and

fixing of dry cladding system with vertical members is 38x25mm Aluminium tubes, horizontal

members is 38 x25 mm aluminium tubes &fixing of fraiming with 38x25 mm Aluminum Angel

clits .Fixing of Porcelain tiles with dow corning make structural silicon& double side tape and

groove with weather sillicon filling in joints .

E 9 WOOD AND P.V.C. WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames,

29 9.1 wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia

& length ( hold fast lugs or dash fastener shall be paid for separately).

29.1 9.1.1 Second class teak wood Cum 0.292 142949.7 41708.26

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative

type, core of block board construction with frame of 1st class hard wood and well matched teak

3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

30.1 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 28.665 3473.85 99577.91

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

edges of flush door shutters (over all area of door shutter to be measured). Sqm 28.665 462.35 13253.26

Providing and fixing wooden moulded beading to door and window frames with iron screws,

plugs and priming coat on unexposed surface etc. complete.

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328

33 8.28 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed

33.1 8.28.1 Decorative veneer facings of approved manufacture Sqm 57.33 1946.25 111578.51

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter

bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix

(1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less

35 9.96 than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts

and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than

36 9.97 grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary

screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than

37 9.1 grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary

screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic

38 9.101 coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and

shade, with necessary screws etc. complete.

38.1 9.101.1 Single rubber stopper Each 13 39.6 514.80

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer

39 (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door

width upto 700 mm), with necessary accessories and screws etc. complete. Each 10 1124.85 11248.50

Providing and Fixing Fire rated M.S Shaft Door Including Frame 50x50x5 mm thick angle Frame

and shutter fabricated from 16 gauge GI Sheet final finish with powder coating. Also fixing

Floated Glass size 250x450x6mm thick with all accessories like Hinges/Lock/Rubber Beading and

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate

made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with

vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The

41 9.136 frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame

and fixing with dash fastener of approved size and make, including applying a coat of approved

brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener

to be paid for separately). R.M 6 1709.25 10255.50

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating

conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-

charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100

mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than

42 9.137 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball

bearing hinges of approved make, including applying a coat of approved fire resistant primer

etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately).

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with

G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size

20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150

mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less

than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all

respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with

glass of required thickness having 60 minutes of fire resistance both integrity & radiation

43 9.138 control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give

test report/certification of fire glass and the glass should have the stamp showing the value of

E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other

accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per

ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size

shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock

44 9.139 on back side of the Panic Latch of reputed brand and manufacture to be approved by the

Engineer- in- charge, all complete Sqm 12 8366.15 100393.80

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing and fixing Toilet cubical(of following standard dimension which includes 600mm door

size width) made up of thermosetting resign treated high pressure ,self supporting decorative

compact laminates with permanently incorporate anti-bacterial agents(under JIS Z2801:2000

certification) during manufacturing .Compact board should be resistance to water immersion

45 NDSR through permissible increase on thickness and mass <0.60% and board density >1.35kg/cm3

and fulfilled the criteria of green guard gold certification and manufactured under EN438-

2&3:2005 standard. 12mm thick compact board should be Moisture resistant, Impact resistant,

termite resistant ,Scratch resistant ,Weather and climatic shock resistant.

46 NDSR Urinal Partition made of compact laminate of approved shade & make Nos 12 7,055.01 84660.14

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin

PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood

powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100

gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body

threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw

47 26.86 withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58

N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category

with property of being termite/borer proof, water/moisture proof and fire retardant and fixed

in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per

direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for

Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and

width of profile shall be acceptable. Variation in profile dimensions on plus side shall be

acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

decorative type flush door shutter of required size comprising of virgin polymer of K value 58-

60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat

husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum

density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),

minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to

48 26.88 spread of flame of Class A category with property of being termite/ borer proof,

water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14

microns thick of approved design pasted with hot melt adhesive on both faces of shutter and

fixing with stainless steel butt hinges of required size with necessary full body threaded star

headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless

steel butt hinges and necessary S.S screws shall be paid separately

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing & fixing wooden sliding folding partition of 50mm thick in zig zag shape up to 6 panels

folding in one direction including necessery accessories i.e. top track, bottom track, two running

gears with M8 bolt, ss butt hinge 102 X76 X 3 (3 hinges per panel), End support brackets top &

49 NDSR bottom. Outer frame is of 50mm and inner frame is of 20mm. Each panels are of 550mm or as

per the approved shop drawing. Height of panel 2400mm or approved shop drawings as per

site condition. Panels should be made of block board finished with 1mm thick laminate of

approved shade. Sqm 45.1 22223.29 1002270.22

TOTAL (Carried Over to Summary of Civil Works) 1054649.48 1915622.88

F 10 STEEL WORK

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in

50 10.25 position and applying a priming coat of approved steel primer using structural steel etc. as

In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever

required, all complete Kg 1740 123.6 215064.00

50.2 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 1120 172.6 193312.00

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing, polishing and making curvature (wherever required)

and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing

with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of

51 10.28 required size, on the top of the floor or the side of waist slab with suitable arrangement as per

approval of Engineer-incharge, (for payment purpose only weight of stainless steel members

shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

TOTAL (Carried Over to Summary of Civil Works) 1026296.00 0

G 11 FLOORING WORK

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as

well as curvilinear portions of the building all complete as per the architectural drawings with

18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4

52 11.56 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry

admixed with pigment of matching shade including rubbing , curing and polishing etc. all

complete as specified and as directed by the Engineer-in-Charge.

52.1 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent Sqm 242.04 4481.3 1084653.85

53 11.24 Extra for pre finished nosing to treads of steps of marble / granite stone. Rmt 26.6244 719.9 19166.91

Extra for marble / granite stone flooring in treads of steps and risers using single length up to

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey

55 11.26 cement slurry mixed with pigment to match the shade of the slab, including rubbing and

polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm

(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement

slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with

57 11.2 neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and

cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

57.1 11.20.2 Medium shade pigment using 50% white cement 50% Grey cement Sqm 78 1328.35 103611.30

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching

plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum

dewatering process and finally finished by floating, brooming with wire brush etc. complete as

per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid

for separately).

(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as

per design mix is payable/ recoverable separately).

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to

be specified by the manufacturer ) of approved make in all colours, shades except burgundy,

bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and

dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of

matching shade complete. Sqm 80.56 1112.7 89638.69

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by

the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours,

60 11.38 shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar

1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including

pointing the joints with white cement and matching pigments etc., complete Sqm 328.79 1315.3 432457.49

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

61 11.41A joints with white cement and matching pigments etc. The tiles must be cut with the zero

chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge,

clips of required thickness, leveling system and rubber mallet for placing the tiles gently and

61.1 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Grouting the joints of flooring/wall tiles having joints of 3 mm width, using epoxy grout mix of

0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per

kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer),

with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all

63 11.46 colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1

cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the

joint with white cement & matching pigments etc. complete. Sqm 54.774 1,623.05 88900.94

63.1 11.46.2 Size of Tile 600x600 mm

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required

pattern in linear portion of the building all complete as per architectural drawings, with 18 mm

thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

64 11.51 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white

cement slurry admixed with pigment to match the marble shade including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

H 12 ROOFING WORK

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar

refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and

sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement

: 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of

1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing

skirting upto 150 mm height along the parapet walls in the same manner. Sqm 45.12 1703.95 76882.22

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone

66 12.21 aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3

fine sand) as per standard design :

Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m

67 12.22 x1 m x 40 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a

coat of neat cement, rounding the edges and making and finishing the outlet complete.

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above

floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced

with rabbit wire mesh fixed to wooden frame (frame work to be paid separately):

Providing and fixing false ceiling at all height including providing and fixing of frame work made

of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x

1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed

to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of

cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9

mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm

thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at

450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate

channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every

junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm

and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at

450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25

mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges

of the board with recommended jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of joint

and two coats of primer suitable for board, all as per manufacturer’s specification and also

including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame

of perimeter channels suitably fixed, all complete as per drawings, specification and direction of

the Engineer in Charge but excluding the cost of painting with :

70.1 12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board 40 1529.1 61164.00

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (

galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably

spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum)

sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm

thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to

form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm

made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel

to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles

of approved texture in the grid including, required cutting/making, opening for services like

diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended

from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia

and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of

size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width

of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights

as per specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm,

and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm

(both sides inclusive) and electro statically polyester powder coated of thickness 60 microns

(minimum), including factory painted after bending. Sqm 80.56 1902.95 153300.94

12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre

conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4

mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven

tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm

resin bonded glass wool backing.

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of

approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%,

Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 0.057 w/m K, Fire Performance as per

(BS 476 pt - 6 &7)in true horizont al level suspended on interlocking T-Grid of hot dipped all

round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T

runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and

secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size

600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50

mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod

73 26.27 up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm

centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the

help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed

to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S.

screws. The exposed bottom portion of all T-sections used in false ceiling support system

shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as

per specifications, drawings and as per directions of the engineer-in-charge.

73.1 26.27.2 With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) Sqm 590.91 2671.2 1578452.12

TOTAL (Carried Over to Summary of Civil Works) 3052876.45 0.00

I 13 FINISHING WORK

74 13.4 12 mm cement plaster of mix :

75 13.12 18 mm cement plaster of mix :

76 13.16 6 mm cement plaster of mix :

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to

prepare the surface even and smooth complete. Sqm 2093.50 262.7 549962.19

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required

New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of

exterior primer applied @ 0.90 litre/10 sqm) Sqm 466.341 223.6 104273.85

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

79 13.83 Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,

including applying additional coats wherever required to achieve even shade and colour.

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Polishing in high gloss/matt finish melamine clear polish on wood work in required

color/wooden shade texture with following process in the sequence as detailed below: Sqm 57.33 3049.65 174836.43

TOTAL (Carried Over to Summary of Civil Works) 1824356.32 0.00

STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL

Providing and supplying aluminium extruded tubular and other aluminium sections as per the

architectural drawings and approved shop drawings , the aluminium quality as per grade 6063

T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to

81 25.1 AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item

includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of

extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of

aluminium extruded section shall be taken for purpose of payment. Kg 2010 414.3 832743.00

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized

system of structural glazing (with open joints) for linear as well as curvilinear portions of the

building for all heights and all levels, including: (a) Structural analysis & design and preparation

of shop drawings for the specified design loads conforming to IS 875 part III (the system must

passed the proof test at 1.5 times design wind pressure without any failure), including

functional design of the aluminum sections for fixing glazing panels of various thicknesses,

aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc.,

structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,

82 25.2 microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and

protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip

galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to

accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural

glazing system rigidly to the RCC/ masonry/ structural steel framework of building structure

using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with

nuts and washers etc. of stainless steel grade 316, of the required capacity and in required

Providing, assembling & supplying DGU laminated glass comprising of hermatically-sealed with

6mm clear Heat strengthen + 1.52mm clar PVB + 6mm Low-e performance glass heat

strengthen + 12mm air gap + 6mm heat strengthened glass inside. Glass color and shade will be

83 NDSR approved by the architect/consultant. Glass performance properties shall be maintained below

as direction of engineer-in-charge. The IGU laminated glass shall be assembled in the

factory/workshop. Properties Visual Light Transmission 50%, External reflection 18%, U-value

1.5 W/Sqm K or less than that. Sqm 201.00 8,974.79 1803932.55

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened

monolithic float glass of approved colour and shade with reflective soft coating on surface # 2

of approved colour and shade so as to match the colour and shade of the IGUs in the vision

panels etc. ,all complete for the required performances as specified, as per the Architectural

drawings, as per the approved shop drawings, as specified, and as directed by the Engineerin-

Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding

the area of grooves and weather silicone sealant) provided and fixed in position, shall be

84 25.6 measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included

in cost of relevent Item*).“(i) Coloured tinted float glass 6mm thick substrate with reflective

soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %,

Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-

0.28) and U value of 3.0 to 3.3 W/m2 K etc. . The properties of performance glass shall be

decided by technical sanctioning authority as per the site requirement.

Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying

at site all accessories and hardwares for the openable panels as specified and of the approved

make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with

85 25.4 stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners,

nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved

shop drawings, as specified and as directed by the Engineer- in-Charge.

Providing, fabricating and supplying shadow box of required size and shape, for fixing in the

spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building

by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50 mm thick,

conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory

86 25.5 bonded on surface # 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue

of nominal thickness 0.5 mm and nominal mass not less than 60 gm /sqm, made of randomly

oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick

solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts,

washers etc complete.

TOTAL (Carried Over to Summary of Civil Works) 1667264.50 1803932.55

SH 21 ALUMINIUM WORKS

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia

and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with

87 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium

snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash

fasteners to be paid for separately) :

87.1 21.1.1 For fixed portion

87.1.1 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 353.944 530.9 187908.87

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and

88 21.1.2 making provision for fixing of fittings wherever required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for separately)

88.1 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 503.512 634.45 319453.19

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing

89 21.8 weather silicon sealant over backer rod of approved quality as per architectural drawings and

direction of Engineer-in-charge complete.

89.1 21.8.1 Upto 5mm depth and 5 mm width Rmtr 204 96.75 19737.00

Providing and fixing glazing of 8mm toughened glass in aluminium door, window, ventilator

90 MR shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the

architectural drawings and the directions of engineer-in-charge . Sqm 142.48 2690 383271.20

TOTAL (Carried Over to Summary of Civil Works) 527099.06 383271.2

M 22 WATER PROOFING

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of applying :

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer

91 22.5 of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126

kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48

hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners,

junctions of pipes and masonry with polymer mixed slurry.)

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry

mixed with water proofing cement compound consisting of applying: (a) after surface

preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

compound @ 0.253 kg/sqm (b) laying second layer of Fibre glass cloth when the first layer is still

green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm

92 22.6 thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement

compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure

for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30

cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of

brick tiling with cement mortar (which will be paid for separately. For the purpose of

measurement the entire treated surface will be measured.

TOTAL (Carried Over to Summary of Civil Works) 209950.54 0

External Devlopment

Earth work in Excavation by mechanical means (Hydraulic excavator)/manualmeans over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and

disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-

Filling available excavated earth (excluding rock) in trenches, plinth, sides of oundations etc. in

94 2.25 layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and

watering, lead up to 50 m and lift upto 1.5 m. Cum 62.13 196 12177.48

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources) Cum 3.89 6812 26498.68

Providing and laying in position specified grade of reinforced cement concrete, excluding the

cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

96.1 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). Cum 19.77 9045.75 178834.48

Reinforced cement concrete work in walls (any thickness), including attached pilasters,

buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts

etc. above plinth level up tofloor five level, excluding cost of centering, shuttering, finishing and

reinforcement :

97.1 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). Cum 7.95 10852.95 86280.95

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all complete upto plinth level.

98.1 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 2966.1 107.85 319893.89

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Centering and shuttering including strutting, propping etc. and removal of form for all heights :

99.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 58.32 392.15 22870.19

99.2 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 89.1 961.3 85651.83

99.3 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 75.03 736.4 55252.09

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in :

100.1 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 27.67 9105.95 251961.64

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5

101 13.11 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

102 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of

exterior primer applied @ 2.20 kg/10 sqm) Sqm 288 160.6 46252.80

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10

metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m

height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9

horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain

103 16.53 horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per

direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick)

wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/

metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10

metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m

height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9

horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain

104 16.53 horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per

direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick)

wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/

metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Structural steel work in single section, fixed with or without connecting plate, including cutting,

105 10.1 hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Earth work in Excavation by mechanical means (Hydraulic excavator)/manualmeans over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and

disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or

stacked materials.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of oundations etc. in

108 2.25 layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and

watering, lead up to 50 m and lift upto 1.5 m. Cum 177.93 196 34874.28

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources) Cum 3.76 6812 25613.12

Providing and Laying in position ready mixied or site batched design mix cement concrete for

reinforced cement concrete work : using Coarse aggregate and fine aggreagate is derived from

natural sources, portland pozzolana /ordinary portland /Portland salg cement, admixtures in

recomended proportion as per IS; 9103 to accelerate / retard setting of Concrete, to improve

110 5.33 durability and workabilty without impairing Strength : Inculding pupming of concrete to site of

laying, Curing carriage of all lead but excluding the cost of centring and shuttring finishing and

reinforcment as per Direction of EIC for following grade of Conctrete

110.1 5.33.1 All works upto plinth level. Cum 14.49 9504 137712.96

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all complete upto plinth level.

111.1 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 2050 107.85 221092.50

Centering and shuttering including strutting, propping etc. and removal of form for all heights :

112.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 7.614 392.15 2985.83

112.2 5.9.2 Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc. Sqm 242.4 961.3 233019.12

Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in

113 10.25 position and applying a priming coat of approved steel primer using structural steel etc. as

113.1 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 150 172.6 25890.00

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by

the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as

114 11.37 White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4

Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with

white cement and matching pigment etc., complete. Sqm 242.4 1096.55 265803.72

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing

treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs,

podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc.,

prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for

vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal

surfaces and applying the same from negative (internal) side with the help of synthetic fiber

115 22.23 brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing

permeability of concrete by more than 90% compared with control concrete as per DIN 1048

and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be

capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all

complete as per specification and the direction of the engineer-in-charge. The product

performance shall carry guarantee for 10 years against any leakage.

115.1 22.23.1 For vertical surface two coats @ 0.70 kg per sqm Sqm 242.4 406 98414.40

115.2 22.23.2 For horizontal surface one coat @1.10 kg per sqm Sqm 13.21 311.5 4114.92

B 3 HORTICULTURE AND LAND SCAPING (SOFTSCAPE)

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable

materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of

116 2.1 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with

sludge or / and manure before and after flooding trench with water (excluding cost of imported

earth, sludge or manure). cum 10 68.7 687.00

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead

complete (earth measured in stacks will be reduced by 20% for payment). cum 10 469.5 4695.00

Supplying and stacking at site dump manure from approved source, including carriage upto 5

km lead complete (manure measured in stacks will be reduced by 8% for payment) :

118.1 2.4.3 Screened through sieve of I.S. designation 4.75 mm cum 5 287.75 1438.75

119 2.5 Rough dressing the trenched ground including breaking clods. sqm 45 1.3 58.50

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including

disposal of uprooted vegetation. sqm 25 4.3 107.50

121 2.7 Fine dressing of the ground. sqm 20 3.25 65.00

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of

officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). cum 40 46.15 1846.00

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Mixing earth and sludge or manure in the required proportion specified or directed by the

Officer-in-charge cum 110 32.1 3531.00

Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for

30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including

supplying good earth, if needed (the grass and good earth shall be paid for separately).

124.1 2.10.1 In rows 5 cm apart in both directions sqm 45 15.55 699.75

124.2 2.10.2 With grass Turf sqm 12 11.7 140.40

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the

excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods

and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after

reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%),

125 2.13 flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling

etc. including stacking and disposal of materials declared unserviceable and surplus earth by

spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of

sludge, manure or extra earth to be paid for separately)

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with

manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after

126 2.14 reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with

water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts

(cost of manure, sludge or extra good earth if needed to be paid for separately)

126.2 2.14.2 Holes 90 cm dia, and 90 cm deep Each 10 130.4 1304.00

126.3 2.14.3 Holes 60 cm dia, and 60 cm deep Each 5 39.95 199.75

126.4 2.14.4 Holes 45 cm dia, and 45 cm deep. Each 5 17.1 85.50

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing

ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling

127 2.33 the surface with light roller make the surface smoothen and light waterning with sprinkler and

maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-

charge. Per Sqm 10 211.25 2112.50

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing

ground prepared with proper level and ramming with required tools wooden and than rolling

128 2.34 the surface with light roller make the surface smoothen and light watering the same

maintenance for 30 days or more till the grass establish properly,as per direction of officer in

charge Per Sqm 5 84.35 421.75

Removal of garden waste by TATA 407 or equivalent including loading/unloading and carriage

129 2.6 upto 1 km lead,complete disposal upto designated place as per direction of officer-in-charge .

130 2.27 Supplying and spreading of sand in lawn area, including watering, and dressing complete. cum 3 1,006.25 3018.75

Providing and Displaying of Aglaonema Sam ht.30 cm well developed three in one, having 18 to

131 3.6 20 fresh, healthy and attractive colorful leaves in 35 cm size Earthen pot/Chali/Tray & as per

direction of the officer-in-charge. Each 5 307.5 1537.50

Providing and displaying of Araucaria cookie having ht. 1.80 m to 1.95 m, straight, well

132 3.17 developed, fresh and healthy with lush green leaves from bottom to top in 30 cm size of

Earthen pot/Plastic pot & as per direction of the officer-in-charge. Each 5 563.75 2818.75

Providing and displaying of Areca Palm having ht. 2.40 m to 2.70 m with 12 to 14 suckers, well

133 3.22 developed, fresh and healthy with lush green foliage in 35 cm size of Bucket type cement pots

& as per direction of the officer-in-charge. Each 5 592.45 2962.25

Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to

134 3.38 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen

pot/Plastic pot & as per direction of the officer-in-charge. Each 5 344.4 1722.00

Providing and displaying of Croton Petra Bangalore (Specimen ) variety having ht. 60 cm to 75

135 3.39 cm with 4 to 6 branches, well developed, fresh & healthy foliage approximately 60-65 leaves in

30 cm size of Earthen pot/ Plastic pot & as per direction of the officer-in-charge. Each 5 538.15 2690.75

4 Gate & Guard Room

Earth work in Excavation by mechanical means (Hydraulic excavator)/manualmeans over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and

disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

137 2.25 layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and

watering, lead up to 50 m and lift upto 1.5 m. CUM 196 9.868 1934.13

4 CONCRETE WORKS

138 4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) Cum 6812 0.5655 3852.19

5 REINFORCED CEMENT CONCRETE WORK

139 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

139.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 392.15 17.88 7011.64

139.2 5.9.20 Suspended floors, roofs, landings, balconies and access platform. Sqm 1028.4 3.24 3332.02

139.3 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 961.3 11.112 10681.97

139.4 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 736.4 12.966 9548.16

139.5 5.9.16 Edges of slabs and breaks in floors and walls

Providing and laying in position ready mixed or site batched design mix cement concrete for

reinforced cement concrete work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve

140 5.33 durability and workability without impairing strength; including pumping of concrete to site of

laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.

140.1 5.33.1 All works upto plinth level Cum 9504.75 2.11196 20073.65

140.2 5.33.2 All works above plinth level upto floor V level Cum 9860.4 2.5596 25238.68

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and

binding all complete upto plinth & above plinth level.

141.1 5.22.6 Thermo-Mechanically Treated bars. Kg 107.85 1922.9568 207390.89

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

foundation and plinth in:

142.1 6.1.2 Cement mortar 1:6 (1 Cement : 6 coarse sand) Cum 7132.25 0.6624 4724.40

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in :

143.1 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 9105.95 3.94335 35907.95

8 MARBLE & GRANITE WORKS

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick base cement mortar

144 8.2 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss

finish etc. complete at all levels.

9 WOOD & PVC WORK

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less

145 9.96 than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts

and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than

146 9.97 grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary

screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than

147 9.1 grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary

screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic

148 9.101 coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and

shade, with necessary screws etc. complete.

148.1 9.101.1 Single rubber stopper Nos 39.6 1 39.60

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles

149 9.113 of approved quality for aluminium door, with necessary screws etc complete as per direction of

Engineer- in-charge. Nos 850.05 1 850.05

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in

150 10.25 position and applying a priming coat of approved steel primer using structural steel etc. as

150.1 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 172.6 636.35 109834.76

11 FLOORING WORK

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved

make, in all colours and shades,

151 11.41 laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments

etc., complete.

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar

refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and

sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement

152 12.55 : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of

1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing

skirting upto 150 mm height along the parapet walls in the same manner. Sqm 1703.95 3.93 6696.52

Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m

153 12.22 x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a

coat of neat cement, rounding the edges and making and finishing the outlet complete.

13 FINISHING WORK

154 13.4 12 mm cement plaster of mix :

155 13.16 6 mm cement plaster of mix :

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5

156 13.12 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished

rough with sponge. sqm 537.45 137.47 73885.40

Distempering with oil bound washable distemper of approved brand and manufacture to give

an even shade :

New work (two or more coats) over and including water thinnable priming coat with cement

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required

New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of

exterior primer applied @ 2.20 kg/10 sqm) Sqm 171.1 137.47 23521.80

Providing and applying white cement based putty of average thickness 1 mm, of approved

159 13.8 brand and manufacturer, over the plastered wall surface to prepare the surface even and

smooth complete. Sqm 156.05 159.77 24931.33

Painting with synthetic enamel paint of approved brand and manufacture to give an even

160.1 13.62.1 Two or more coats on new work Sqm 226.25 34.84 7882.55

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven

story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes

joinin with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S.

staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable

condition for the required duration as approved and removing it there after .The scaffolding

161 14.72 system shall be stiffened with bracings, runners, connection with the building etc wherever

required for inspection of work at required locations with essential safety features for the

workmen etc. complete as per direc ons and approval of Engineer in-charge .The eleva onal

area of the scaffolding shall be measured for payment purpose .The payment will be made

once irrespective of duration of scaffolding

21 ALUMINIUM WORKS

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia

and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with

162 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium

snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash

fasteners to be paid for separately) :

162.1 21.1.1 For fixed portion

162.1.1 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) KG 530.9 42.71 22675.86

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and

163 21.1.2 making provision for fixing of fittings wherever required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for separately)

163.1 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kG 634.45 42.71 27098.70

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc.

with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the

directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

164.1 21.3.3 With float glass panes of 8 mm thickness (weight not less than 12.50 kg/sqm) SQM 1685.4 1.68 2838.55

Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing

165 21.8 weather silicon sealant over backer rod of approved quality as per architectural drawings and

direction of Engineer-in-charge complete.

165.1 21.8.1 Upto 5mm depth and 5 mm width Rmtr 96.75 8 774.00

22 WATER PROOFING

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

PROJECT :- PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

BOQ - CIVIL WORKS Amount

DESCRIPTION UNIT Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Providing and laying integral cement based water proofing treatment including preparation of

surface as required for treatment of roofs, balconies, terraces etc consisting of following

operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed

with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface

before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115

166 22.7 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water

proofing compound conforming to IS : 2645 and approved by Engineer-in- charge over 20 mm

thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer- in-charge to required slope and

treating similarly the adjoining walls upto 300 mm height including rounding of junctions of

walls and slabs.

166.1 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. Sqm 1684.6 5.65 9517.99

TOTAL Gate work 670623.48 0.00

Total External Development 3131137.58 0.00

Dismantling and Demolishing of existing building

Demolishing the existing RCC structure 2000 sft area approx by manual/mechanical means including

stacking of scrap steel and disposal of construction waste to dumping location as approved by statutory

167 NDSR authorities without cause any inconveinince to the neighbouring plot owners which also includes LS 1 455000 455000

providing green nets for dust mitigation etc. in order to level the ground for execution of new

168 NDSR Selling of scrap steel for approximate 2000 sft area Kg -35 3000 -105000

Total Dismantaling work 350000

Digitally signed by DEEPAK

Signature of NBCC

Date: 2024.08.07 18:49:56 IST Signature of Contractor

FURNITURE BOQ-PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

S no Units NDSR Rate NDSR Amount

Area Item Description y DSR Rate DSR Amount

Supply and Fixing Polyfill fiber for Extra Comfort Chair Heavy chrome metal frame 25mm oval shade . Bonded leatherette.

Cushioned seat and back. Non scratchable PVC shoes. Overall Size — Height: 975mm, Width — 575mm, Depth — 640mm,

Seat Height — 450mm, Seat Size. Width — 510mm x Depth —

500mm, Back Size. Height — 595mm x Width — 490mm.

Under structure in cantilever type, MS cold rolled close annealed

tube of Dia. 32mm x 1.6mm thickness.

Multipur Seat in hot pressed plywood with steel T-Nuts for rigid fastening

pose Hall with PP cover and high density moulded PU cushion.

Single piece die caste nylon arm rest.

Quality tapestry with double stitch, available in black leatherite only.

All steel components are epoxy coated followed by seven

tanks anti corrosion treatment of surface.

Suppling and Placing Main table of size 2200x750x740mmH, side table of size 900x450x740mmH and with 3 Drawer

pedestal 350x450x550mmH, and back unit of Size 1800X450X1800 made of PLPB board conforming to IS : 12823 Interior

Grade with PVC edge banding. Top are with 25mm thk PLPB boards with 2mm PVC edge banding with enhanced scratch

resistance supported on 25mm thk. Gable ends and 18mm thk Modesty panels with PVC edge banding . Separate provision

for mounting switches on the wall adjoining the tables shall be made by customer as the tables do not come with switch

mounting facility. Wire routing / wire management gourmets shall be provided on main or side table as specified by customer.

All the exposed edges are with 2mm PVC edge Imported banding & sealed edges are with 0.8mm thick PVC Imported edge

banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.The units are assembled by knock

down fittings such as Minifix & Dowels. pedestal unit of size 350x450x550mm made up of 18mm thk. PLPB board

conforming to IS : 12823 Interior Grade with post formed edge profile on top with premium central locking and 3 equal size

drawers with roller slide mechanism for added mobility.

Suppling and Placing High Back Chair Made up of combination of 12mm (7 layers) & 4mm (3 layers) thick hot pressed

plywood and 37mm thick, 32 Density U foam upholstered with Leatherite. The back ply and foam is designed with contoured

lumber support for achieving comfortable seating posture. Back rest available in two sizes - High Back 860mm (H) X 550mm

(W). The backrest tested for 1,20,000 cycles to be completed with a load of 44.5Kg as per ANSI / BIFMA X5.1.

SEAT : The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric.

Seat Size 510mm (W) X490mm (D). The seat tested for 1,00,000 cycles to be completed with a load of 57kg impact force on

the seat as per ,Seat foam made out of moulded Polyurethane foam with Density: 50-60 Kg/m3 and Resilience: 50% - 60%

ARM REST : The armrests made of black integral skin polyurethane with 40-55 Shore Hardness and reinforced with 2mm

thick M.S. insert. Arm pad size 248mm (L) x 92mm (W). The armrests are fitted to the seat with seat/armrest connecting strip

assembly made of 6mm thick. HR steel. 2D arms with height adjustable up to 80mm & front and back with adjustable up to

60mm. Arm rest tested for 60,000 Cycles to be completed with load of 40Kg

MECHANISM Synchro tilt : Mechanism with SINGLE lever control for lock and seat height adjustment. Mechanism (dunati)

made out of MS Plate thickness is 3mm and seat is tilting angle is 0°~6°. and back tilting angle is 89°~109°. Also it has the

back tension adjustment knob. Mechanism tested for 3, 00,000 Cycles.

GAS LIFT :Gas lift pipe diameter 50mm and has an Height adjustment stoke of 120mm. Gas lift tested for 1, 00,000 Cycles

Meets DIN 4550 Class 3 and all applicable ANSI/BIFMA, EN performance standard

BASE :NYLON BASE : The base made up of pressure die casted in aluminium fitted with 5Nos twin wheel castors. The base

is 650mm pitch circle diameter. The base tested for static load of 1134Kg as per ANSI / BIFMA X 5.1.

CASTERS : NYLON CASTORS : The twin wheel castors are injection moulded in nylon and diameter of Castor 50 mm. The

castors are tested for 1,00,000 Cycles as per ANSI / BIFMA X 5.1.

Signature of NBCC Page 31 Digitally signed by DEEPAK Signature of Contractor

FURNITURE BOQ-PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

S no Units NDSR Rate NDSR Amount

Area Item Description y DSR Rate DSR Amount

Supplying and Placing MID Back Chair EQUIS MÁXIMO Made up of combination of 12mm (7 layers) & 4mm (3 layers)

thick hot pressed plywood and 37mm thick, 32 Density U foam upholstered with fabric . The back ply and foam is designed

with contoured lumber support for achieving comfortable seating posture. Back rest available in two sizes - Mid Back (MB)

700mm (H) X 550mm (W). The backrest tested for 1,20,000 cycles to be completed with a load of 44.5Kg

SEAT : The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric.

Seat Size 510mm (W) X490mm (D). The seat tested for 1,00,000 cycles to be completed with a load of 57kg impact force on

the seat as per,Seat foam made out of moulded Polyurethane foam with Density: 50-60 Kg/m3 and Resilience: 50% - 60%

ARM REST : The armrests made of black integral skin polyurethane with 40-55 Shore Hardness and reinforced with 2mm

thick M.S. insert. Arm pad size 248mm (L) x 92mm (W). The armrests are fitted to the seat with seat/armrest connecting strip

assembly made of 6mm thick. HR steel. 2D arms with height adjustable up to 80mm & front and back with adjustable up to

60mm. Arm rest tested for 60,000 Cycles to be completed with load of 40Kg

MECHANISM : SYNCHRO TILT MECHANISM : Mechanism with single lever control for lock and seat height adjustment.

Mechanism ( dunati) made out of MS Plate thickness is 3mm and seat is tilting angle is 0°~6°. and back tilting angle is

89°~109°. Also it has the back tension adjustment knob. Mechanism tested for 3, 00,000 Cycles as per

GAS LIFT :Gas lift pipe diameter 50mm and has an Height adjustment stoke of 120mm. Gas lift tested for 1, 00,000 Cycles

as per Meets DIN 4550 Class 3 a

BASE :Nylon Base : The base made up of pressure die casted in nylon fitted with 5Nos twin wheel castors. The base is

650mm pitch circle diameter. The base tested for static load of 1134Kg as per ANSI / BIFMA X 5.1.

CASTORS : NYLON CASTORS : The twin wheel castors are injection moulded in nylon and diameter of Castor 50 mm. The

castors are tested for 1,00,000 Cycles

Supplying and placing in position of 3 Sofa Size 2010 X 900 X 850 (WDH)mm , Frame : Plywood and klin chemical treated

tropical meranti wood. Seating cushions : 3 inches elastic webbing (350 gsm) with daigonal weave and 7 inches layered foam,

5 (32D 23D 32D HD) WITH Ployster ployfill oiuter layer (180 gsm). Upholetry : Leatheriteette and Malamine finish rubber Nos 1 50,991.67 50,991.67

Supplying and placing tables of Center table Size - 1200mm W x 600mm D x 365mm H for whose top is made of Particle

board wood Grade E-1(Environmental Friendly), thickness 25mm cover with Melamine, Edge banding (PVC) 2mm.E1 grade

6 laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house Nos 1 14,279.28 14,279.28

quality. This should comply with (EN 120-1992).The understructure is made of SS CHROME BASE. Product should be

BIFMA gold rated SCSglobal certified for inhouse air quality .

Suppling and Intallaing executive Cabin Table of size 1600x750x740mmH, side table of size 1200x450x740mmH and 3

Drawer pedestal 350x450x550mmH, made of Prelam particle board conforming to IS : 12823 Interior Grade with PVC edge

banding. Top are with 25mm thk boards with 2mm PVC edge banding with enhanced scratch resistance supported on 25mm

thk. Gable ends and 18mm thk Modesty panels with PVC edge banding . Separate provision for mounting switches on the

wall adjoining the tables shall be made by customer as the tables do not come with switch mounting facility. Wire routing /

wire management gourmets (Wipro Patented Squeeze) shall be provided on main or side table as specified by customer. All

the exposed edges are with 2mm PVC edge Imported banding & sealed edges are with 0.8mm thick PVC Imported edge

banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.The units are assembled by knock

down fittings such as Minifix & Dowels. Kingsley Premium pedestal unit of size 350x450x550mm made up of 18mm thk.

Prelam particle board conforming to IS : 12823 Interior Grade with post formed edge profile on top with premium central

locking and 3 equal size drawers with roller slide mechanism for added mobility

Signature of NBCC Page 32 Digitally signed by DEEPAK Signature of Contractor

FURNITURE BOQ-PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

S no Units NDSR Rate NDSR Amount

Area Item Description y DSR Rate DSR Amount

HRD Cabin High Back Chair Made up of combination of 12mm (7 layers) & 4mm (3 layers) thick hot pressed plywood and

37mm thick, 32 Density U foam upholstered with fabric or Leatherite. The back ply and foam is designed with contoured

lumber support for achieving comfortable seating posture. Back rest available in two sizes - High Back 860mm (H) X 550mm

(W). The backrest tested for 1,20,000 cycles to be completed with a load of 44.5Kg as per ANSI / BIFMA X5.1.

SEAT : The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric.

Seat Size 510mm (W) X490mm (D). The seat tested for 1,00,000 cycles to be completed with a load of 57kg impact force on

the seat as per ANSI / BIFMA X5.1.,Seat foam made out of moulded Polyurethane foam with Density: 50-60 Kg/m3 and

Resilience: 50% - 60%

ARM REST : The armrests made of black integral skin polyurethane with 40-55 Shore Hardness and reinforced with 2mm

thick M.S. insert. Arm pad size 248mm (L) x 92mm (W). The armrests are fitted to the seat with seat/armrest connecting strip

assembly made of 6mm thick. HR steel. 2D arms with height adjustable up to 80mm & front and back with adjustable up to

8 60mm. Arm rest tested for 60,000 Cycles to be completed with load of 40Kg as per ANSI / BIFMA X5.1. Nos 1 26,328.68 26,328.68

MECHANISM : FOUR POINT SYNCHRO MECHANISM : Mechanism with two lever control for lock and seat height

adjustment. Mechanism made out of MS Plate thickness is 3mm and seat is tilting angle is 0°~6°. and back tilting angle is

89°~109°. Also it has the back tension adjustment knob. Mechanism tested for 3, 00,000 Cycles as per ANSI / BIFMA X5.1.

GAS LIFT :Gas lift pipe diameter 50mm and has an Height adjustment stoke of 120mm. Gas lift tested for 1, 00,000 Cycles

as per ANSI / BIFMA X5.1. Meets DIN 4550 Class 3 and all applicable ANSI/BIFMA, EN performance standard

BASE :ALUMINIUM BASE : The base made up of pressure die casted in aluminium fitted with 5Nos twin wheel castors.

The base is 650mm pitch circle diameter. The base tested for static load of 1134Kg as per ANSI / BIFMA X 5.1.

CASTERS : NYLON CASTORS : The twin wheel castors are injection moulded in nylon and diameter of Castor 50 mm. The

castors are tested for 1,00,000 Cycles as per ANSI / BIFMA X 5.1.

Manager Cabin MID Back Chair Made up of combination of 12mm (7 layers) & 4mm (3 layers) thick hot pressed plywood

and 37mm thick, 32 Density U foam upholstered with fabric . The back ply and foam is designed with contoured lumber

support for achieving comfortable seating posture. Back rest available in two sizes - Mid Back (MB) 700mm (H) X 550mm

(W). The backrest tested for 1,20,000 cycles to be completed with a load of 44.5Kg as per ANSI / BIFMA X5.1.

SEAT : The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric.

Seat Size 510mm (W) X490mm (D). The seat tested for 1,00,000 cycles to be completed with a load of 57kg impact force on

the seat as per ANSI / BIFMA X5.1.,Seat foam made out of moulded Polyurethane foam with Density: 50-60 Kg/m3 and

Resilience: 50% - 60%

ARM REST : The armrests made of black integral skin polyurethane with 40-55 Shore Hardness and reinforced with 2mm

thick M.S. insert. Arm pad size 248mm (L) x 92mm (W). The armrests are fitted to the seat with seat/armrest connecting strip

assembly made of 6mm thick. HR steel. 2D arms with height adjustable up to 80mm & front and back with adjustable up to

9 60mm. Arm rest tested for 60,000 Cycles to be completed with load of 40Kg as per ANSI / BIFMA X5.1. Nos 2 22,836.10 45,672.20

MECHANISM : FOUR POINT SYNCHRO MECHANISM : Mechanism with two lever control for lock and seat height

adjustment. Mechanism made out of MS Plate thickness is 3mm and seat is tilting angle is 0°~6°. and back tilting angle is

89°~109°. Also it has the back tension adjustment knob. Mechanism tested for 3, 00,000 Cycles as per ANSI / BIFMA X5.1.

GAS LIFT :Gas lift pipe diameter 50mm and has an Height adjustment stoke of 120mm. Gas lift tested for 1, 00,000 Cycles

as per ANSI / BIFMA X5.1. Meets DIN 4550 Class 3 and all applicable ANSI/BIFMA, EN performance standard

BASE :ALUMINIUM BASE : The base made up of pressure die casted in aluminium fitted with 5Nos twin wheel castors.

The base is 650mm pitch circle diameter. The base tested for static load of 1134Kg as per ANSI / BIFMA X 5.1.

CASTORS : NYLON CASTORS : The twin wheel castors are injection moulded in nylon and diameter of Castor 50 mm. The

castors are tested for 1,00,000 Cycles as per ANSI / BIFMA X 5.1.

Signature of NBCC Page 33 Digitally signed by DEEPAK Signature of Contractor

FURNITURE BOQ-PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

S no Units NDSR Rate NDSR Amount

Area Item Description y DSR Rate DSR Amount

Provide and supply Meeting table 14 seater 4800x2400x740: Table Top made of 25mm thick prelam particle board

confirming to IS 12823 Interior Grade with the exposed edges sealed with 2mm PVC edge banding. The height of the table

top from the ground should be 740mm. supported on the legs and beams. Legs are made of 50 x 50mm thick Square pipe

made of 1.6mm thick CRCA pipe duly powder coated interconnected with tie member of 80 x 40mm pipe structure made of

1.6mm thick CRCA duly powder coated. The size of the beam is 100mm height and depth of 445mm for sharing. The powder

coating thickness considered is 50 to 60 microns DFT. Structure to fully welded with all arc welding from inside eliminating

manual finishing. Provision for wire management is through the vertical and horizontal of the mast made up of 1.6 mm thick

CRCA bent into the C shape channel. The mast size is 500 x 105mm and cover is 0.7mm thick galvanized iron sheet in

10 powder cated finish. The inner brackets are 3 mm thick CRCA. Provision for flip top box are patented DUO is also available Nos 1 1,41,852.48 1,41,852.48

for accessing wires from the table top. The leg shoe is made up of 100% recyclable nylon 6. The shoe helps in mounting of

levellers on the legs by eliminating any welding process. The levellers are made of Nylon 6 with M8 bolts insert moulded to

take care of any floor undulation. Beam is made of 1.2mm thick CRCA bent in the form of C channels with 3mm thick CRCA

brackets. The bottom cover is made of 0.7 mm thick GI sheet.

WIRE MANAGEMENT: - The vertical wire is carried through the mast and is carried in the horizontal direction by the beam

which also acts as wire carrying member. The switches can be mounted on Duo provided above table top.

Confrence Mid Back Chair :-VOC Certified chair - ANSI/BIFMA X7.1-2007 & ANSI/BIFMA M7.1-2011.The cushioned seat

assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot

pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with

mesh fabric and mounted on the main assembly. Size of back shall be (W)-48.5cm, (H)-49.5 cm & size of seat shall be (W)-49

cm x (D)-44.0 cm .Armrest has 2 way button operated height adjustment and depth adjustment. The arm top is made of soft

moulded Laminate with MS insert.The mechanism of chair shall have following features:360 degree revolving type, Synchro

mechanism, Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. Head rest assembly shall made

11 up of polyurethane foam upholstered with fabric. The head rest assembly is mounted on the top of back. It has 5 point Nos 12 16,965.88 2,03,590.55

adjustment of upto 8 cm . The chair shall be provided with pneumatic height adjustment which shall have stroke of 112 mm.

The pedestal shall be made of die-cast polished nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal

Confrence shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in

Room black nylon or Laminate . Overall dimensions of Chair shall be, Width of Chair - 70 cm, Depth of Chair - 70.0 cm as measured

from pedestal below. Height from ground - min 96.5 to max 108.0 cm. Seat height - min 47 cm to max 58.5 cm. Dimensions

tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards.

Signature of NBCC Page 34 Digitally signed by DEEPAK Signature of Contractor

FURNITURE BOQ-PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

S no Units NDSR Rate NDSR Amount

Area Item Description y DSR Rate DSR Amount

HRD Cabin High Back Chair Made up of combination of 12mm (7 layers) & 4mm (3 layers) thick hot pressed plywood and

37mm thick, 32 Density U foam upholstered with fabric or Leatherite. The back ply and foam is designed with contoured

lumber support for achieving comfortable seating posture. Back rest available in two sizes - High Back 860mm (H) X 550mm

(W). The backrest tested for 1,20,000 cycles to be completed with a load of 44.5Kg as per ANSI / BIFMA X5.1.

SEAT : The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric.

Seat Size 510mm (W) X490mm (D). The seat tested for 1,00,000 cycles to be completed with a load of 57kg impact force on

the seat as per ANSI / BIFMA X5.1.,Seat foam made out of moulded Polyurethane foam with Density: 50-60 Kg/m3 and

Resilience: 50% - 60%

ARM REST : The armrests made of black integral skin polyurethane with 40-55 Shore Hardness and reinforced with 2mm

thick M.S. insert. Arm pad size 248mm (L) x 92mm (W). The armrests are fitted to the seat with seat/armrest connecting strip

assembly made of 6mm thick. HR steel. 2D arms with height adjustable up to 80mm & front and back with adjustable up to

12 60mm. Arm rest tested for 60,000 Cycles to be completed with load of 40Kg as per ANSI / BIFMA X5.1. Nos 1 28,726.47 28,726.47

MECHANISM : FOUR POINT SYNCHRO MECHANISM : Mechanism with two lever control for lock and seat height

adjustment. Mechanism made out of MS Plate thickness is 3mm and seat is tilting angle is 0°~6°. and back tilting angle is

89°~109°. Also it has the back tension adjustment knob. Mechanism tested for 3, 00,000 Cycles as per ANSI / BIFMA X5.1.

GAS LIFT :Gas lift pipe diameter 50mm and has an Height adjustment stoke of 120mm. Gas lift tested for 1, 00,000 Cycles

as per ANSI / BIFMA X5.1. Meets DIN 4550 Class 3 and all applicable ANSI/BIFMA, EN performance standard

BASE :ALUMINIUM BASE : The base made up of pressure die casted in aluminium fitted with 5Nos twin wheel castors.

The base is 650mm pitch circle diameter. The base tested for static load of 1134Kg as per ANSI / BIFMA X 5.1.

CASTERS : NYLON CASTORS : The twin wheel castors are injection moulded in nylon and diameter of Castor 50 mm. The

castors are tested for 1,00,000 Cycles as per ANSI / BIFMA X 5.1.

Table of size 1500x750x740mmH, s, made of Prelam particle board conforming to IS : 12823 Interior Grade with PVC edge

banding. Top are with 25mm thk boards with 2mm PVC edge banding with enhanced scratch resistance supported on 25mm

thk. Gable ends and 18mm thk Modesty panels with PVC edge banding . Separate provision for mounting switches on the

wall adjoining the tables shall be made by customer as the tables do not come with switch mounting facility. Wire routing /

wire management gourmets (Wipro Patented Squeeze) shall be provided on main or side table as specified by customer. All

13 the exposed edges are with 2mm PVC edge Imported banding & sealed edges are with 0.8mm thick PVC Imported edge Nos 2 40,299.00 80,598.00

banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.The units are assembled by knock

down fittings such as Minifix & Dowels. Kingsley Premium pedestal unit of size 350x450x550mm made up of 18mm thk.

Prelam particle board conforming to IS : 12823 Interior Grade with post formed edge profile on top with premium central

locking and 3 equal size drawers with roller slide mechanism for added mobility.

Providing and Placing in position High Back Chair. The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood &

upholstered with synthetic Leatherite and moulded polyurethane foam. The dimensions of seat should be 49.0cm(W) x

51.4(D) and that of back should be 51.8cm(W) x 75.2cm(H). High Resilience (HR) polyurethane foam should be used in

making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for

25% compression.The adjustable armrests are designed with up-down adjustment in 8 steps(8.0+/-0.5 range). The height

adjustable armrest structure is chrome plated and fitted with Laminate moulded over metal insert fixed armrest top. The

mechanism of the chair shall have following features : 360⁰ revolving type, Single point control, Tilt tension adjustment, 4

14 position locking with antishock feature, seat back tilt ratio 1:2, front pivot for tilt with feet resting on ground ensuring more Nos 2 12,660.60 25,321.21

comfort. The Back can be adjusted in 5 positions manually. Stroke of height adjustable spine is 7 cm. The chair shall be

provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal is High Pressure Die cast

polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm.

With castors).The twin wheel castors are injection moulded in black PP. Seat can be slide horizontaly as per user

convienience. Stroke of seat slide is 5 cm. Overall dimensions of Chair shall be, Width of Chair - 67.5cm, Depth of Chair -

67.5cm as measured from pedestal below. Height from ground - min 102.0 to max 119.0cm. Seat height - min 45.0 to max

Signature of NBCC Page 35 Digitally signed by DEEPAK Signature of Contractor

FURNITURE BOQ-PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

S no Units NDSR Rate NDSR Amount

Area Item Description y DSR Rate DSR Amount

Providing and Placing in position The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with

synthetic Leatherite over moulded polyurethane foam. The dimensions of seat should be 49.0cm(W) x 51.4(D) and that of

back should be 51.6cm(W) x 65.7cm(H). High Resilience (HR) polyurethane foam should be used in making seat & back

which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The

15 tubular frame is powder coated ( DFT 40-60 microns ) cantilever structure & made of Dia.Ø 2.54 ±0.03cm. x 0.2 Nos 4 9,779.22 39,116.90

±0.016cm.thk. M.S. E.R.W. Tube with a connecting M.S. Spine welded to it. Back spine is fitted to the frame assembly.

Overall dimensions of Chair shall be, Width of Chair - 57.5cm, Depth of Chair - 58.2cm as measured from pedestal below.

Height from ground - 110.8cm. Seat height - min 47.0 cm.

Providing and Placing in position Staff Room Workstation, Size 1500 X 600x750 with adjustable features that cater to your

individual needs. The height-adjustable desk allows you to find the perfect ergonomic position, reducing strain and promoting

a healthy posture.Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mm thk and

ht - 1200 including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric

tackable/white board/glass writing board/ clear glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic /

fabric / laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum) thick paper honeycomb + 3mm PLPB

on each sides + 0.6mm decorative laminate or fabric on both sides. The uprights and horizontals shall be made of aluminium

extrusion having average wall thickness of 1.2 mm & powder coated with epoxy- polyester powder. Particle board framing is

used on outer boundary of these blocks as well as intermediately at certain locations forming conduit for passing cables. These

16 blocks are located in the mid segment of the panels and can be provided with cutouts for mounting switch boxes (above or Nos 4 39,761.68 1,59,046.72

below the worktops)Fabricated bottom frame for 52.4mm (50mm Minimum) panel comprises of L-channels made of 2mm

thick CRCA steel (IS: 513), formed plates of 3mm thick HR steel (IS: 2062) & ERW steel tube of size 35 mm (30 mm

Minimum) x15 mm (10mm Minimum)x1.6mm thick in oval cross section (IS: 7138) welded together. This frame is bolted to

the uprights with M6 screws. Top tiles can be offered in variety of combinations. Worksurface- out of 25 mm thk prelam

particle board with flat pvc lipping edge banding of size 1200mm x 600mm x 750H. Brackets shall be made from 2mm thick

CRCA steel. Pedestals with legs - Nova pedestal flat metal front, free standing central locking of size 390 mm w x 435 mm d x

646 mm height 3dr = 2box+1file. The work shall be carried out as per the instructions and guidance received from engineer

Providing and Placing The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The

foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame.

The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-46 cm,

(H)-55 cm & size of seat shall be (W)-48 cm x (D)-44.0cm. Armrest has option of height adjustment . The arm top is made of

soft moulded Laminate .The mechanism of chair shall have following features:360 degree revolving type, Synchro mechanism,

Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. The chair shall be provided with pneumatic

height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos

twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin

wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of

Chair - 70.0 cm as measured from pedestal below. Height from ground - min 95 to max 104 cm. Seat height - min 45.0cm to

max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm.

Back Storage :-W1200xD450xH750mm Providing and placing low height laminate hinged door storage unit of 750mm Ht .

Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823. The back of the unit is made

from 18mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with

18 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge Nos 24 20,955.48 5,02,931.52

banding.Storage has adjustable shelves inside and cam lock, tower bolt and locking strips. The units are assembled by knock

down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. Certifications - ISO 9001 - 2015

,14001- 2015 ,45001-2018 , BIS and BIFMA Complaint member , BIFMA GOLD . Warranty 5 years .

Providing & fixing wood work in stage area up to height 600mm by creating base & support with wood batons and finished

with 19mm thick commercial ply all in complete as per the direction of engineer in charge

Signature of NBCC Page 36 Digitally signed by DEEPAK Signature of Contractor

FURNITURE BOQ-PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

S no Units NDSR Rate NDSR Amount

Area Item Description y DSR Rate DSR Amount

Supply and fixing modular kitchen cabinet floor units for L shaped Size 15 X 6 counter arrangement comprising following

units (refer tender drawing): Galvanized Steel sheet factory made customized)

Class Providing and Placing 12mm round solid bar with crome plated . Having 15mm thick ply in seat and back. Cushioning with

21 Room 1 & 50MM thick foam uphostry with fabric on both seat and back. 18mm thick PLPB writting pad in. board . 20mm PVC buffer in Nos 144 6,044.85 8,70,458.40

2 legs for non scratch on the floor

Providing and Placing in place of table of follwoing specifications. The overall dimensions of the table shall be 3000 x 1500 x

750mm. These terminating leg structure shall be in M.S. CRCA sheet/ tubes/rods as per IS. 513/7138/432 finished with epoxy

power coating of the approved colour as per the project designer. Worktop shall be made of 25MM thick Pre-Laminated Board

conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued

22 with hot melt EVA glue. Cross members in the system are made from 50 mm x 25 mm x 1.2 mm thick. Cross members are Nos 2 56,389.05 1,12,778.09

assembled by friction fit PDC joinery and Grub screws. All cross members are mounted at a distance of 165 mm from worktop

sides. Wire management: Wire tray with integrated power box made with a combination of 0.6 mm thick CRCA outer body

and 0.8 mm thick CRCA switch plate (8+3 Anchor Roma) module cut out as standard. They are mounted on worktop.

Providing and Placing The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The

foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame.

The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-46 cm,

(H)-55 cm & size of seat shall be (W)-48 cm x (D)-44.0cm. Armrest has option of height adjustment . The arm top is made of

soft moulded Laminate .The mechanism of chair shall have following features:360 degree revolving type, Synchro mechanism,

Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. The chair shall be provided with pneumatic

height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos

twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin

wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of

Chair - 70.0 cm as measured from pedestal below. Height from ground - min 95 to max 104 cm. Seat height - min 45.0cm to

max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm.

HRD Cabin High Back Chair Made up of combination of 12mm (7 layers) & 4mm (3 layers) thick hot pressed plywood and

37mm thick, 32 Density U foam upholstered with fabric or Leatherite. The back ply and foam is designed with contoured

lumber support for achieving comfortable seating posture. Back rest available in two sizes - High Back 860mm (H) X 550mm

(W). The backrest tested for 1,20,000 cycles to be completed with a load of 44.5Kg as per ANSI / BIFMA X5.1.

SEAT : The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric.

Seat Size 510mm (W) X490mm (D). The seat tested for 1,00,000 cycles to be completed with a load of 57kg impact force on

the seat as per ANSI / BIFMA X5.1.,Seat foam made out of moulded Polyurethane foam with Density: 50-60 Kg/m3 and

Resilience: 50% - 60%

ARM REST : The armrests made of black integral skin polyurethane with 40-55 Shore Hardness and reinforced with 2mm

thick M.S. insert. Arm pad size 248mm (L) x 92mm (W). The armrests are fitted to the seat with seat/armrest connecting strip

assembly made of 6mm thick. HR steel. 2D arms with height adjustable up to 80mm & front and back with adjustable up to

24 60mm. Arm rest tested for 60,000 Cycles to be completed with load of 40Kg as per ANSI / BIFMA X5.1. Nos 5 28,726.47 1,43,632.35

MECHANISM : FOUR POINT SYNCHRO MECHANISM : Mechanism with two lever control for lock and seat height

adjustment. Mechanism made out of MS Plate thickness is 3mm and seat is tilting angle is 0°~6°. and back tilting angle is

89°~109°. Also it has the back tension adjustment knob. Mechanism tested for 3, 00,000 Cycles as per ANSI / BIFMA X5.1.

GAS LIFT :Gas lift pipe diameter 50mm and has an Height adjustment stoke of 120mm. Gas lift tested for 1, 00,000 Cycles

as per ANSI / BIFMA X5.1. Meets DIN 4550 Class 3 and all applicable ANSI/BIFMA, EN performance standard

BASE :ALUMINIUM BASE : The base made up of pressure die casted in aluminium fitted with 5Nos twin wheel castors.

The base is 650mm pitch circle diameter. The base tested for static load of 1134Kg as per ANSI / BIFMA X 5.1.

CASTERS : NYLON CASTORS : The twin wheel castors are injection moulded in nylon and diameter of Castor 50 mm. The

castors are tested for 1,00,000 Cycles as per ANSI / BIFMA X 5.1.

Signature of NBCC Page 37 Digitally signed by DEEPAK Signature of Contractor

FURNITURE BOQ-PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

S no Units NDSR Rate NDSR Amount

Area Item Description y DSR Rate DSR Amount

Providing and Placing 12mm round solid bar with crome plated . Having 15mm thick ply in seat and back. Cushioning with

Class 50MM thick foam uphostry with fabric on both seat and back. 18mm thick PLPB writting pad in. Action Tessa board . 20mm Nos

Room 2 PVC buffer in legs for non scratch on the floor

Providing and Placing in position Staff Room Workstation LOS MUEBLES MAYOR Ergonomics takes centre stage in Los

Muebles Mayor, Size 1200 X 600x750 with adjustable features that cater to your individual needs. The height-adjustable desk

allows you to find the perfect ergonomic position, reducing strain and promoting a healthy posture.Providing and placing

panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated

aluminium trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric tackable/white board/glass writing board/

clear glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic / fabric / laminated /prelam. The panel

thickness comprises of 38mm (35 mm Minimum) thick paper honeycomb + 3mm PLPB on each sides + 0.6mm decorative

laminate or fabric on both sides. The uprights and horizontals shall be made of aluminium extrusion having average wall

thickness of 1.2 mm & powder coated with epoxy- polyester powder. Particle board framing is used on outer boundary of

these blocks as well as intermediately at certain locations forming conduit for passing cables. These blocks are located in the

mid segment of the panels and can be provided with cutouts for mounting switch boxes (above or below the

worktops)Fabricated bottom frame for 52.4mm (50mm Minimum) panel comprises of L-channels made of 2mm thick CRCA

steel (IS: 513), formed plates of 3mm thick HR steel (IS: 2062) & ERW steel tube of size 35 mm (30 mm Minimum) x15 mm

(10mm Minimum)x1.6mm thick in oval cross section (IS: 7138) welded together. This frame is bolted to the uprights with M6

screws. Top tiles can be offered in variety of combinations. Worksurface- out of 25 mm thk prelam particle board with flat pvc

lipping edge banding of size 1200mm x 600mm x 750H. Brackets shall be made from 2mm thick CRCA steel. Pedestals with

legs - Nova pedestal flat metal front, free standing central locking of size 390 mm w x 435 mm d x 646 mm height 3dr =

2box+1file. The work shall be carried out as per the instructions and guidance received from engineer incharge.

Make:Godrej/Steelcase/Warila/Haworth/Herman Miller

Providing and Placing The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The

foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame.

The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-46 cm,

(H)-55 cm & size of seat shall be (W)-48 cm x (D)-44.0cm. Armrest has option of height adjustment . The arm top is made of

soft moulded Laminate .The mechanism of chair shall have following features:360 degree revolving type, Synchro mechanism,

Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. The chair shall be provided with pneumatic

height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos

twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin

wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of

Chair - 70.0 cm as measured from pedestal below. Height from ground - min 95 to max 104 cm. Seat height - min 45.0cm to

max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm.

Providing and Placing in place of Library table of follwoing specifications. The overall dimensions of the table shall be 1800 x

1500 x 750mm. These terminating leg structure shall be in M.S. CRCA sheet/ tubes/rods as per IS. 513/7138/432 finished

with epoxy power coating of the approved colour as per the project designer. Worktop shall be made of 25MM thick Pre-

Laminated Board conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick

28 PVC lipping glued with hot melt EVA glue. Cross members in the system are made from 50 mm x 25 mm x 1.2 mm thick. Nos 3 39,761.68 1,19,285.04

Cross members are assembled by friction fit PDC joinery and Grub screws. All cross members are mounted at a distance of

165 mm from worktop sides. Wire management: Wire tray with integrated power box made with a combination of 0.6 mm

thick CRCA outer body and 0.8 mm thick CRCA switch plate (8+3 Anchor Roma) module cut out as standard. They are

mounted on worktop.

Signature of NBCC Page 38 Digitally signed by DEEPAK Signature of Contractor

FURNITURE BOQ-PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

S no Units NDSR Rate NDSR Amount

Area Item Description y DSR Rate DSR Amount

Providing and Placing The seat and back shall be made up of 1.2 ±0.1cm. thick hot pressed plywood measured as per QA

method described in OCP-QLTA-P14-18 and shall be upholstered with fabric and moulded Polyurethane foam with PVC

lipping all around. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of the

back shall be 49.0 cm. (W) x 47.0 cm and of seat shall be 49.0 cm. (W) x 44.0 cm. (D). The HR Polyurethane foam shall be

moulded with density= 45 ±2 kg/m3 and Hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The armrest tops

29 shall be injection moulded from black Polypropylene. They shall be fitted to tubular armrest supports made of dia 2.54 Nos 18 8,906.08 1,60,309.42

±0.03cm. x 0.16 ±0.0128cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns ). The tubular armrest

supports should hold together the seat and back. The tubular frame shall be cantilever type & made of 0 2.54±0.03cm. x 0.2

±0.016cm.thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns). Overall Dimensions of Chair shall be Seat

Height - 43.0cm, Height - 80.0cm, Width & Depth of Chair as measured from pedestal - Width-55.0 cm and Depth-61.0 cm.

Providing and Placing Overall Dimensions of Single Sided Wood & Steel Book Rack shall be

925mm(W)x300mm(D)x1890mm(H). Rigid Knockdown construction . Back panel up to the bottom of third rack for

additional rigidity . Racks, Back panel & Skirting : CRCA 0.8 mm thickness . Side panels : 25 mm thick pre laminated

particle board (PLB) with laminate on both sides . Stackability shall have add-on units width wiseto form a bank of racks

30 having common side panel . Bottom plus four fixed racks plus five storage levels . Each rack is provided with stiffener at Nos 1 25,233.89 25,233.89

bottom for strength . Uniformly distributed load capacity per each full shelf is 80 Kg maximum . Rack back stiffener shall be

there at the rear side of the racks back stiffener s are provided . These are to support books on the rear side . Label Holder on

each main unit to insert labels for identification . Finish shall be Epoxy polyester powder coated to the thickness of 50 microns

Providing and Placing Overall Dimensions of Double Sided Wood & Steel Book Rack shall be

925mm(W)x590mm(D)x1890mm(H). Rigid Knockdown construction . Back panel up to the bottom of third rack for

additional rigidity . Racks, Back panel & Skirting : CRCA 0.8 mm thickness . Side panels : 25 mm thick pre laminated

particle board (PLB) with laminate on both sides . Stackability shall have add-on units width wise to form a bank of racks

31 having common side panel . Bottom plus four fixed racks plus 10 storage levels. Each rack is provided with stiffener at bottom Nos 3 36,934.03 1,10,802.10

for strength . Uniformly distributed load capacity per each full shelf is 80 Kg maximum . Rack back stiffener shall be there at

the rear side of the racks back stiffener s are provided . These are to support books on the rear side . Label Holder on each

main unit to insert labels for identification . Finish shall be Epoxy polyester powder coated to the thickness of 50 microns.

Providing and Placing table of size 1200x750x740mmH, s, made of Prelam particle board conforming to IS : 12823 Interior

Grade with PVC edge banding. Top are with 25mm thk boards with 2mm PVC edge banding with enhanced scratch resistance

supported on 25mm thk. Gable ends and 18mm thk Modesty panels with PVC edge banding . Separate provision for mounting

switches on the wall adjoining the tables shall be made by customer as the tables do not come with switch mounting facility.

Wire routing / wire management gourmets (Wipro Patented Squeeze) shall be provided on main or side table as specified by

32 customer. All the exposed edges are with 2mm PVC edge Imported banding & sealed edges are with 0.8mm thick PVC Nos 1 42,522.16 42,522.16

Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.The units are

assembled by knock down fittings such as Minifix & Dowels. Kingsley Premium pedestal unit of size 350x450x550mm made

up of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with post formed edge profile on top with

premium central locking and 3 equal size drawers with roller slide mechanism for added mobility

Signature of NBCC Page 39 Digitally signed by DEEPAK Signature of Contractor

FURNITURE BOQ-PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

S no Units NDSR Rate NDSR Amount

Area Item Description y DSR Rate DSR Amount

Providing and Placing The seat and back shall be made up of 1.2 ±0.1cm. thick hot pressed plywood measured as per QA

method described in OCP-QLTA-P14-18 and shall be upholstered with fabric and moulded Polyurethane foam with PVC

lipping all around. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of the

back shall be 49.0 cm. (W) x 47.0 cm and of seat shall be 49.0 cm. (W) x 44.0 cm. (D). The HR Polyurethane foam shall be

moulded with density= 45 ±2 kg/m3 and Hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The armrest tops

33 shall be injection moulded from black Polypropylene. They shall be fitted to tubular armrest supports made of dia 2.54 Nos 1 8,906.08 8,906.08

±0.03cm. x 0.16 ±0.0128cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns ). The tubular armrest

supports should hold together the seat and back. The tubular frame shall be cantilever type & made of 0 2.54±0.03cm. x 0.2

±0.016cm.thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns). Overall Dimensions of Chair shall be Seat

Height - 43.0cm, Height - 80.0cm, Width & Depth of Chair as measured from pedestal - Width-55.0 cm and Depth-61.0 cm.

Supplying and placing in position Canteen table of the following specifications. 4 Seater PU Coated size shall be 1135 Width

mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU

painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown

34 Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS Nos 6 18,589.93 1,11,539.57

powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS

powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the

understructure to prevent the damage of table top during stacking .

Providing and Placing The seat and back are made uo injection moulded high impact strenght polypropylene polymer

compound with indoor graade UV Resistance. The Powder coated (DFT50+ microns) weled tubular frame is made from 2.22

+ 0.03 cm x 0.16+/- 0.0128cm and 3.5+/- 0.03 cmx1.5+/-0.03 cm x 0.16 +/- 0.0128 cm M.S.E.R.W tubThe Shoes are made of

high impact strenght polypropylene polymer compond with indoor grad UV Resistance and pressed fitted with tubularfram.

SIZE : (W)52.5cm*(D)55.8cm*(H)84.5cm*(seat H) 45.0 cm

Seat Size 52.5cm(W)*53.2 cm(D)

Back Size 51.6 cm(W)*40.5 cm (H)

Company should be ISO-9001, 14001, 18001, 45001, 50001, Greenguard, BIFMA and AIOTA certified. Product should be

Greenguard (UL)certified.

Signature of NBCC Page 40 Digitally signed by DEEPAK Signature of Contractor

SOLAR BOQ-PROPOSED OFFICE BUILDING AT ICSI HYDERABAD

DSR REF Description Unit QTY. DSR Rate DSR Amount NDSR Rate

Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic

Plant conforming to MNRE specifications as amended, consisting of Mono/Po

Crystalline silicon solar cells, net metering facility, necessary protections, earthing,

mounted on Aluminium/Gl structure Of suitable strength with followi

corn'm•ents complete as required:-

a) Solar Photovoltaic of capacity 330 Wp or above, manufactured in India,

conformirg to S 14286/1EC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part.2. Sola

Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modul

used in solar power plants/ systems must be warranted for their output peak wa

capacity, which should not be kss than 90% at the end of 10 years and at th

end of 25 years.

b) Power Conditioning unit (PCU) of V DC Input voltage range and

AC. three phase, 4 wire, SOHz 4/- 2.5 Hz, output voltage suitable to generate

Power with efficiency not less than 97%, total harmonic distortion less than 3% and

suitable for ambient temperature from O to degree C. The RU shall adjust th

voltage and frequency level to suit the Grid Voltage Frequency.

c) Data Monitoring System complete with accessories.

d) Fixing of Array junction box & Main junction box with IP 6S protection and

termination arrangement for incoming and outgoing cable along with glands, I

and other accessories etc. as required.

e) Lightning and surge voltage protection.

f) Connections & Interconnections by supplying & fixing required size

insulated copper conductor 1.1 kV grade armoured and control cabl

between solar modules, main power cable to grid supply PCL' unit along with

supplying & fixing of necessary channel/conduit lugs and other etc- a

Solar DSR 2019 Solar System KW 15 61060.27 915904.05

TOTAL CARRIED TO SUMMARY 915904.05 0

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ - AUDIO VISUAL SYSTEM

S.No Description Quantity Unit UNIT Rate DSR RATE DSR Amount NDSR Rate NDSR Amount

AUDIO-VIDIO system

SITC of audio-video system as per standard with

required necessary items.

MR 1 Interactive Flat Panel 4 Nos 5,31,071.16 21,24,284.65

SITC of 86” display size with 4K Ultra-HD (3,840 x

2,160) resolution , Backlit D-LED (IPS Panel) , Viewing

Angle : 178°/178°, Life Time : 50,000 Hours , Wireless

Screen Sharing, Screen Broadcasting, Whiteboard,

WPS, Teaching Tools, Screen Recording, Live

Annotation, Browser, App Store, Media Player , WiFi 6

(802.11a/b/g/n/ax 2.4 GHz/5GHz), Bluetooth 5.2 , 1 x

HDMI-Out (up to 4K@60Hz), 1 x Line-Out (3.5mm mini

jack ), 1 x SPDIF-Out , 1 x Mic (3.5 mm mini jack), 3 x

HDMI 2.0 (60 Hz /4K) , Thick Toughened Glass (Level

7H on Mohs scale of Mineral Hardness)

MR 2 Speaker with wall mount bracket 8 Nos 60,079.58 4,80,636.67

SITC of Line Array Column Loudspeaker , Built-in

70V/100V transformer, plus 8 ohm direct capability.

MR 3 Amplifier/Mixer 4 Nos 1,30,228.21 5,20,912.86

SITC of Commercial mixer/amps , 8 inputs with 2

outputs of 40,80, 120-watts of power , 120W @ 4/8

Ohms (1kHz Power, THD+N<0.5%)

TOTAL CARRIED TO SUMMARY

(Conference Room, Classroom 1 & 2 (for 3

Multipurpose Hall)

Digitally signed by DEEPAK

Siganture of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ HVAC-ICSI Hyderabad

S.N DSR-2019 Description of Item Unit Quantit DSR DSR Amount NDSR Rate NDSR Amount

1 VRV/VRF outdoor AC unit:- Supply installation testing and commissioning of VRV /VRF

/MRV outdoor units with following multiple inverter based scroll type compressors,

electronic expansion valve, R 410A/ecofriendly green refrigerant, cooling & heating

mode both options, special pre-coated fin type heat exchanger, low noise direct

driven propeller condenser fans in each module with top discharge including internal

microprocessor controls, safety. The condensing unit should be capable of providing

1 cooling between +/- 5deg. C. to 48 deg. C & heating within 0 deg. C to 15 deg. C, COP

not less than 3.3. Each system should have the provision to combine maximum 3 nos

compressor in each outdoor unit, every single outdoor unit should not have more

than maximum Capacity 20 HP (3 phase) each compressor complete as per

specification. Outdoor/indoor units should be of same make (brand). (Single

phase/three phase)

2 Supply, installation, testing and commissioning of following minimum capacity 4-

way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with

synthetic washable media pre-filter, fan section with low noise fan/dynamically

balanced blower, multispeed motor, coil section with DX Copper coil, electronic

expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration

2 isolation, cord less remote control etc., suitable for operation on single phase 230

V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS System.

The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB

and 19 Degree C WB temperature.

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF

High wall type Indoor unit equipped with washable synthetic media prefilter, fan

section with low noise fan/dynamically balanced blower, multispeed motor, coil section

with DX copper coil, electronic expansion valve, outer cabinet, cord less remote

3 control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50

Hz, single phase AC supply, complete as required. The unit shall have automatic force

shut down provision in case of fire on receiving signal from BMS System. The cooling

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C

3 WB temperature.

Signature of NBCC Digitally signed by DEEPAK Signature of Contractor

BOQ HVAC-ICSI Hyderabad

S.N DSR-2019 Description of Item Unit Quantit DSR DSR Amount NDSR Rate NDSR Amount

5 Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant

piping for VRV/VRF system, complete with fittings, with suitable adjustable ring

4 type hanger supports, jointing/brazing including accessories, insulated with XPLE

Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber

tubular sleeves sections of specified thickness as given below for Suction and

Liquid lines, all accessories as per specifications etc. as required :

5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick

insulation Rmt 68 1,022 69496

5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick

insulation Rmt 68 865 58387.5

5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick

insulation Rmt 64 588 37632

5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Total amount(INR) 978991.5

Total amount(INR) 978991.5

Total amount 978991.5 1461208

Total amount 978991.5 1461208

5 Providing and fixing UPVC pipes, having thermal stability .

Y joints:- Supply, installation, testing & commissioning of ref nut/Y-joints brass for

NS-6 indoor and outdoor units of suitable size as perrequirement, Each 30 5,200 156000

7 Copper Wire multi strand conductor

Supplying and fixing of following sizes of medium class PVC conduit along with

accessories in surface/recess including cutting the wall and making goodthesamein

caseofrecessed conduit as required.

Signature of NBCC Digitally signed by DEEPAK Signature of Contractor

BOQ HVAC-ICSI Hyderabad

S.N DSR-2019 Description of Item Unit Quantit DSR DSR Amount NDSR Rate NDSR Amount

Supplying and installing following size of perforated painted with powder coating M.S.

DSR-EL- cable trays with perforation not more than 17.5%, in convenient sections, joined with

2022/4.1 connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts,

painting suspenders etcas required.

9.1 4.1.4 300 mm widthX 50 mm depthX 1.6mm thickness Metre 215.75 777 167637.75

Supply,laying/fixing testing and commissioning of following thickness insulation

with fire retardant quality expanded polystrene mouldedpipe section of density 20

kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with

10 16.6 500g polythelene faced hessain and finnaly applying 0.63mm aluminium sheet

cladding complete with type 3,grade1roofing feltstrip at joints reparing etc. as per

specification and as required complete in all respect

10.1 16.6.2 Insulation with expanded polysteren of thickness50mm on exsting pipe metre 215.75 1204 259763

11 NS-7 MS Stand for outdoor units duly painted Nos 5 14,000 70000

12 NS-8 Cordless remote controller for indoor units Nos 5 2,800 14000

13 14 AC Pipe Insulation Tube Foam Tube AC Copper Pipe Cover Nitrile Tube

13.1 a 25 mm O.D. wall thickness ≥ 1.4mm (insulation – 19 mm thick) Rmt 68 600

13.2 b 22.2 mm O.D. wall thickness ≥ 1.0mm (insulation – 19 mm thick) Rmt 68 590

13.3 c 19.1 mm O.D. wall thickness ≥ 1.0mm (insulation – 13 mm thick) Rmt 64 530

13.4 d 15.9 mm O.D. wall thickness ≥ 0.8mm (insulation – 13 mm thick) Rmt 64 450

13.5 e 12.7 mm O.D. wall thickness ≥ 0.8mm (insulation – 13 mm thick) Rmt 84 399

13.6 f 9.5 mm O.D. wall thickness ≥ 0.8mm (insulation– 13 mm thick) Rmt 84 389

Main Incomer With Metering & Control

150A FP MCCB 25KA With Microprocessor based release having S/C & O/L

14 Protection. BUS BAR Electrolytic Grade Aluminium Busbar with PVC Heat

Shrinkable Colour Coated Sleeve Suitable for Incoming & Outgoing Feeders (Main

Busbar 200A Aluminium)

Outgoing Section - -

4P 16A 10kA Thermal Magnetic Release based MCB (With S/C,O/L Protection)

41.1 NS-9 TOTAL CARRIED TO SUMMARY Set 1 195000 195000

Supply of Al. Arm. XLPE

Toilet Exhaust Fan

Supplying, erecting and testing of approved make exhaust fan heavy duty with

mounting frame, blades AC 230-250 complete connection and including, frame

bolt/anchor hole fasteners etc. complete finished and as required.

Supply of Al. Arm. XLPE

Signature of NBCC Digitally signed by DEEPAK Signature of Contractor

BOQ HVAC-ICSI Hyderabad

S.N DSR-2019 Description of Item Unit Quantit DSR DSR Amount NDSR Rate NDSR Amount

16 NS-11 4 CX16 sqmm (from starter To outdoor unit) per Metre 20 145 2900

17 NS-12 3.5Cx50 sq.mm, (Main Panel to outdoor starter) per Metre 60 310 18600

Total Amount (INR) 458684.5 3435510.25

Total Amount (INR) 458684.5 3435510.25

Total Amount (INR) 3894194.75

Total Amount (INR) 3894194.75

Signature of NBCC Digitally signed by DEEPAK Signature of Contractor

BOQ - PLUMBING & SANITARY

S.N Description Unit Qty DSR Rate NDSR Rate NDSR Amount

DSR-2023 Amount

Providing and fixing white vitreous china pedestal type water closet (European

type) with seat and lid, 10 litre low level white vitreous china flushing cistern &

C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow

17.3 arrangement with specials of standard make and mosquito proof coupling of

approved municipal design complete, including painting of fittings and

brackets, cutting and making good the walls and floors wherever required :

1 W.C. an with ISI marked white solid lastic seat and lid

2 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid Each 20 8006.6 160132

Providing and fixing Under counter with white glazed vitreous china wash

basins with C.P. brass eurometic self closing pillar tap with flow rate of 3.8 LPM

complying to Green Building, C.P. brass waste and unions and sealing of joints

NS-1 between wash basins and counter slabs around the wash basins with Silicone Each 15 9,827 147405

rubber cement of approved make of matching colour all complete including

3 cutting and making good the walls and floors where required.

17.5 Providing and fixing white vitreous china flat back half stall urinal of size

580x380x350 mm with white PVC automatic flushing cistern, with fittings,

standard size C.P. brass flush pipe, spreaders with unions and clamps (all in

C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and

other couplings in C.P. brass, including painting of fittings and cutting and

making good the walls and floors wherever required :

5 17.5.3 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern Each 12 22058.25 264699

Providing and fixing Urinal Division Plate with table rubbed, edges rounded

and polished, of size 900 x 450 mm, fixed in urinal partitions by cutting a chase

of appropriate width with chase cutter and embedding the stone in the chase

NS-2 with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 Each 12 5782 69384

graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-

6 charge and finished smooth.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen Sink as per

17.10 IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting

7 Of fittings and brackets, cutting and making good the walls wherever required :

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

9 waste fittings com lete.

10 NS-3 Kara Sink Mixer Brass Faucet with Silicone Grey Flexible Spout Each 2 3037 6074

Providing and fixing C.P. brass basin mixer of approved quality and make

11 conforming to IS: specification.15 mm nominal bore

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ - PLUMBING & SANITARY

S.N Description Unit Qty DSR Rate NDSR Rate NDSR Amount

DSR-2023 Amount

Providing and fixing of Health faucet with regulator with flexible pipe 1.0 m

long, wall hooked complete as required with flow rate of 3.8 LPM complying to

NS-5 Green Building requirements. Make: Jaquar -Model No: ALD-565 or equivalent Each 20 1,620 32400

Providing and fixing of 15 mm dia CP brass 2way bib cock with CP wall flange

of approved quality with flow rate of 3.8 LPM complying to Green Building Each 20 1,235.00 24700

13 NS-6 requirements.

14 17.34 Providing and fixing toilet paper holder :

Providing and fixing of C.P. brass twin coat hook with PVC rawl plug & C.P.

15 brass screw complete as required.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of

18.53 approved quality conforming to IS:8931

a 18.53.1 15 mm nominal bore Each 40 574.3 22972

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality &

17 make and as per the direction of Engineer-in-charge.

18 18.58 Providing and fixing'PTMT grating of approved quality and colour.

Supply of solid state, no touch operating, fully hygienic hand drier of approved

shade with single blower, with time delay, summer & winter control, music Each 15 8,610 129150

19 NS-8 while drying, volume ON/OFF controls complete as required.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm

wide with minimum distances of 37 mm from wall face with concealed fittings Each 24 231.95 5566.8

17.72 arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth

102mm, height of 75mm with concealed fitting arrangements, weighing not Each 15 111.45 1671.75

18.65 less than 106 gms.

NS-9 Providing & fixing S,S, guard bar for handicaped toilet Each 2 2,950 5900

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

approved quality) complete with 6 mm thick hard board ground fixed to Each 15 1607.95 24119.25

17.31 wooden cleats with C.P. brass screws and washers complete

EXTERNAL SERVICES

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply including all CPVC plain & brass

threaded fittings This includes jointing of pipes & fittings with one step CPVC

solvent cement, trenching, refilling & testing of joints complete as per direction

20 18.9 of Engineer in Charge.

a 18.9.2 20 mm nominal dia Pipes Metre 257.37 274.30 70596.591

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ - PLUMBING & SANITARY

S.N Description Unit Qty DSR Rate NDSR Rate NDSR Amount

DSR-2023 Amount

b 18.9.3 25 mm nominal dia Pipes Metre 30.6 355.40 10875.24

c 18.9.4 32 mm nominal dia Pipes Metre 32.88 438.60 14421.168

d 18.9.6 50 mm nominal dia Pipes Metre 34.2 794.25 27163.35

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

21 18.17 (screwed end) :

a 18.17.4 65 mm nominal bore Each 8 1742 13936

Providing and fixing ball valve (brass) of approved quality, High or low

22 18.18 pressure, with plastic floats complete

a 18.18.2 20 mm nominal bore Each 2 462.50 925

b 18.18.3 25 mm nominal bore Each 5 464.05 2320.25

c NS-10 50 mm nimonal bore Each 2 890.00 1780

d NS-11 65 mm nominal bore Each 2 1050.00 2100

Providing and fixing enclosed type water meter (bulk type) conforming to IS :

2373 and tested by Municipal Board complete with bolts, nuts, rubber

23 insertions etc. (The tail pieces if required will be paid separately):

a NS-12 20 mm nominal bore Each 1 3200.00 3200

b NS-13 25 mm nominal bore Each 1 3940.00 3940

c NS-14 50 mm nimonal bore Each 1 4679.00 4679

d NS-15 65 mm nominal bore Each 1 5450.00 5450

Providing and fixing gun metal non- return valve of approved quality (screwed

Providing and laying Double Flanged (screwed / welded) Centrifugally (Spun)

25 18.71 Cast Iron, Class B

Providing, installation, testing and commissioning of stainless steel Y- strainer

fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia

26 18.15 holes with stainless steel flan e.

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6

rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts,

27 18.11 washers, gaskets conforming to IS 13095 of following sizes as required :

Providing and fixing,testing and commissioning of expansion Bellow,Material

28 Rubber and MS Flange,Thread Size As per customers requirement

Water Level Indicator with Musical Alarm on Tank Full and Buzzer on Tank

29 Empty with 20 metres of Sensor Wire

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ - PLUMBING & SANITARY

S.N Description Unit Qty DSR Rate NDSR Rate NDSR Amount

DSR-2023 Amount

Providing and placing on terrace (at all floor levels) polyethylene water

tank, IS : 12701 marked, with cover and suitable locking arrangement and

making Per Litre 16000 11.00 176000

necessary holes for inlet, outlet and overflow pipes but without fittings and the

30 18.48 base support for tank

31 Electric Panel For Plumbing

Main Incomer With Metering & Control

63A FP MCCB 25KA With Microprocessor based release having S/C & O/L

Electrolytic Grade Aluminium Busbar with PVC Heat Shrinkable Colour

Coated Sleeve Suitable for Incoming & Outgoing Feeders (Main Busbar

a 200A Aluminium)

b Outgoing Section - -

c 16A ,TPN, 8MCB

d NS-19 TOTAL CARRIED TO SUMMARY Set 1 165000 165000

Supply of ISI marked direct online starters conforming towith suitable over

32 relay range and contactor size, N415 V, 3 -Phase with two earthing terminals

Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe

conforming to IS 1239 including welding, fittings like elbows, tees, flanges,

DAR- tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with

2022/18.8 suitable clamp/support frame and painting with two or more coats Of

33 synthetic enamel paint of required shade complete as required

b NS-21 1.5 HP head metre 10-15, discharge LPM 500- 320 Each 4 33500.00 134000

c NS-22 5 HP head metre 24-37, discharge LPM 780- 320 Each 4 46865.00 187460

Water cooler with normal-cold- hot tap.inbuilt water purifier.water cooler

capacity storage capacity 80 L,cooling capacity 25 litre Body material

Stainless Steel 1W+2C Faucets Cold & Warm Water cooler ,Refrigerant : each 2 49500 99000

a NS-23 R22,Dimension : 1145x812x612 mm Voltage : 230 V Frequency : 50 Hz

SEWERAGE & DRAINAGE NETWORK

Providing, laying, jointing & testing of following P.V.C. pipes with solvent

cement joint for 8 kg/ sq. cm. pressures including testing of joints, cost of

35 jointing materials etc. complete in all respect.(class B)

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ - PLUMBING & SANITARY

S.N Description Unit Qty DSR Rate NDSR Rate NDSR Amount

DSR-2023 Amount

a NS-24 40 mm diametre metre 52.08 240 12499.2

b NS-25 110 mm diameter metre 253.00 320 80960

c NS -26 200 mm diameter metre 120.00 1861 223320

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with

CPWD- collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1

36 2023/19.6 cement : 2 fine sand) including testing of joints etc. complete :

Providing, Laying & Jointing of DWC (double wall corrugated) PE Pipes of

renowned duly tested inclusive of all cost of inspection charges, transpotation

charges, transit insuranse, loading/ unloading and stacking at site/ store etc,

Constructing brick masonry road cath basin 450x450x77.5 cm with bricks in

cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical

38 grating complete as per standard design :

a NS-28 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 3.00 6889.8 20669.4

Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in

cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical

39 19.28 grating complete as per standard design :

a 19.28.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 3.00 6889.8 20669.4

19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4

coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand

(zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation

concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone

aggregate 40 mm nominal size), inside plastering 12 mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat

cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement complete as per standard design :

19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light

duty) 455x610 mm

internal dimensions, total weight of cover and frame to be not less than 38 kg

(weight of cover

a 23 kg and weight of frame 15 kg) :

b 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 4.00 12750 51000

19.21 Making connection of drain or sewer line with existing manhole including

breaking into and making good the walls, floors with cement cincrete 1:2:4 mix

(1cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

cement plastered on both sides with cement mortar 1:3 (1cement : 3 coarse

sand) finished with a floating coat of neat cement and making necessary

41 channels for the drain etc. complete for pipes 100 to 250mm dia.

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ - PLUMBING & SANITARY

S.N Description Unit Qty DSR Rate NDSR Rate NDSR Amount

DSR-2023 Amount

a 19.21.1 For pipes 100 to 250 mm diameter Item 4 810.45 3241.8

Making khurras 45x45 cm with average minimum thickness of 5 cm cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm

12.22 nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm each 4 298.25 1193

cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,

42 rounding the edges and making and finishing the outlet complete

RAIN WATER HARVESTING PIT

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable

method prescribed in IS: 2800 (part I), including collecting samples from

different strata, preparing and submitting strata chart/bore log, including hire

& running charges of all equipments, tools, plants & machineries required for

the job, all complete as per direction of Engineer –in-charge, upto 90 metre

43 23.1 depth below ground level.

a 23.1.1 All types of soil

Supplying, assembling, lowering and fixing in vertical position in bore well,

unplasticized PVC medium well casing (CM) pipe of required dia, conforming to

IS: 12818, including required hire and labour charges, fittings & accessories

44 23.3 etc. all complete, for all depths, as per direction of Engineer –in-charge.

a) 23.3.3 200 mm nominal size dia. Meter 40 1113.35 44534

Supplying, assembling, lowering and fixing in vertical position in bore well

unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:

12818, including hire & labour charges, fittings & accessories etc. all complete,

45 for all depths, as per direction of Engineer-in-charge.

a) 23.4.3 200 mm nominal size dia. Meter 40 1255.7 50228

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20

cm, in recharge pit, in the required thickness, for all leads & lifts, all complete cum 4 1509.8 6039.2

46 23.5 as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in

the recharge pit, over the existing layer of boulders, in required thickness, for cum 4 1538.25 6153

47 23.6 all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2

mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, cum 4 1538.25 6153

48 23.7 all complete as per direction of Engineer –in-charge.

Gravel packing in tubewell construction in accordance with IS: 4097, including

providing gravel fine/ medium/ coarse, in required grading & sizes as per cum 4 2024 8096

49 23.8 actual requirement, all complete as per direction of Engineer-in-charge.

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of

50 23.15 pipe assembly of tubewell as per IS:2800 (part I).

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ - PLUMBING & SANITARY

S.N Description Unit Qty DSR Rate NDSR Rate NDSR Amount

DSR-2023 Amount

Providing and fixing factory made precast RCC perforated drain covers, having

concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced

with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars,

including providing 50 mm dia perforations @ 100 to 125 mm c/c, including

providing edge binding with M.S. flats of size 50 mm mm x 1.6 mm complete, all

51 23.9 as per direction of Engineer-in-charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including jointing with seal ring conforming

a 12.41 to IS : 5382, leaving 10 mm gap for thermal expansion (i) Single socketed pipes

1 Boring/drilling bore well of required dia for casing / strainer pipe, by suitable

method prescribed in IS: 2800 (part I), including collecting samples from

different strata, preparing and submitting strata chart/ bore log, including hire

& running charges of all equipments, tools, plants & machineries required for

the job, all complete as per direction of Engineer -in-charge, upto 90 metre

23.1 depth below ground level.

23.1.1 All types of soil

23.1.1.1 300 mm nominal size dia Metre 50 707.75 35387.5

2 Supplying, assembling, lowering and fixing in vertical position in bore well,

unplasticized PVC medium well casing (CM) pipe of required dia, conforming to

IS: 12818, including required hire and labour charges, fittings & accessories

23.3 etc. all complete, for all depths, as per direction of Engineer -in-charge.

23.3.3 200 mm nominal size dia Metre 30 1113.35 33400.5

3 Supplying, assembling, lowering and fixing in vertical position in bore well

unplasticized PVC medium well screen (RMS) pipes with ribs, conformingto IS:

12818, including hire & labour charges, fittings & accessories etc.all complete,

23.4 for all depths, as per direction of Engineer-in-charge.

23.4.3 200 mm nominal size dia Metre 20 1255.7 25114

4 Gravel packing in tubewell construction in accordance with IS: 4097, including

providing gravel fine/ medium/ coarse, in required grading & sizes as per

23.8 actual requirement, all complete as per direction of Engineerin- charge. Cum 4 2024.5 8098

5 Providing and fixing factory made precast RCC perforated drain covers, having

concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced

with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars,

including providing 50 mm dia perforations @ 100 to 125 mm c/c, including

providing edge binding with M.S. flats of size 50 mmmm x 1.6 mm complete, all

23.9 as per direction of Engineer-in-charge. Each 1 1399.95 1399.95

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ - PLUMBING & SANITARY

S.N Description Unit Qty DSR Rate NDSR Rate NDSR Amount

DSR-2023 Amount

6 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189,

to establish maximum rate of usable water yield without sand content (beyond

permissible limit), with required capacity air compressor, running the

compressor for required time till well is fully developed, measuring yield of

well by “V” notch method or any other approved method, measuring static

level & draw down etc. by step draw down method, collecting water samples &

getting tested in approved laboratory, i/c disinfection of tubewell, all complete,

including hire & labour charges of air compressor, tools & accessories etc., all

23.12 as per requirement and direction of Engineer-in-charge. Hour 10 1085.05 10850.5

7 Providing and fixing suitable size threaded mild steel cap or spot welded plate

to the top of bore well housing/ casing pipe, removable as per requirement, all

23.13 complete for borewell of:

8 Providing and fixing M.S. clamp of required dia to the top of casing/housing

pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of

23.14 required size complete.

9 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of

23.15 pipe assembly of tubewell as per IS:2800 (part I).

10 Providing and fixing gun metal gate valve with C.I. wheel of approved quality

18.17 (screwed end) :

a) 18.17.4 50 mm nominal bore Each 1 1026.65 1026.65

11 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed

a) 18.19.4.2 50 mm nominal bore Each 1 1445.15 1445.15

Providing and fixing G.I. pipes complete with G.I. fittings including trenching

12 18.12 and refilling etc.

a) 18.12.6 50 mm dia nominal bore Metre 75 762.15 57161.25

b) 18.12.7 65 mm dia nominal bore Metre 25 896.6 22415

c) 18.12.8 80 mm dia nominal bore Metre 25 1041.7 26042.5

13 NS-29 Supplying & installation of submersible pump set directly coupled with 5 HP

motor nominal speed 2900 RPM suitable for operation on 3-phase, 50 cycles,

400 + 5% volts A.C. power supply to give yield of 5000 LPH at a head of 135

a) Total head = 135 Mt

b) Flow rate = 15000 LPH Set 1 120000 120000

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ - PLUMBING & SANITARY

S.N Description Unit Qty DSR Rate NDSR Rate NDSR Amount

DSR-2023 Amount

Sub Total Amount 1430719.15 1666052.6

Sub Total Amount 1430719.15 1666052.6

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

ICSI BOQ FIRE FIGHTING

S.N DAR- Description Unit Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Supply Installation, testing & commissioning of 4 loop microprocessor based

intelligent and electronically addressable, modular, with networking card &

printer port- loops panel (expandable) with each loop capacity of 159

detectors. Fire alarm control panel with 5.7 inch touch screen LCD display,

multiple access levels 10,000 event history logs in the nonvolatile memory

(EEPROM). The panel should be modular microprocessor based in nature and

1 should be expandable from single loop to up to 32 loops. The panel shall have

240V AC power supply, automatic battery charger, 24 V, ceiled lead acid

maintenance free batteries sufficient for 24 hours normal working and then be

capable of operating the system for 30 minutes during emergency condition.

Provision for integration to BMS back net software. The panel shall be EN

54/UL certification

Supplying, installation, testing & commissioning of intelligent addressable

2 17.2.9 thermal detector with rate of rise cum fixed tempreature thermistor complete Each 2 2726 5452

with base as required.

Supplying, installation, testing & commissioning of intelligent analog

3 17.2.7 addressable photothermal detector complete with mounting base complete as Each 50 3270 163500

Supplying, installation, testing & commissioning response indicator on

4 17.2.5 surface/recess MS box having two LEDs metallic cover complete with all Each 60 276 16560

connections etc. as required.

Supplying, installation, testing & commissioning of addressable manual call

point complete as required.

Supplying, installation, testing & commissioning of fault isolator

complete with base as required.

Supplying, installation, testing & commissioning of addressable fire control

module complete as required.

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Siganture of Contractor

ICSI BOQ FIRE FIGHTING

S.N DAR- Description Unit Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Supply, Installation, Testing & Commissioning of Addressable Monitor Module

for Sprinklers, Panic Bars & other Third Party Inputs. The monitor module shall

monitor potential free contacts. The device shall have an LED which shall blink

8 NS-2 in normal state & get steady on activation to monitor the heath status of the Each 5 3038 15190

device. Addressing shall be with user friendly rotary decimal switches. Module

shall be supplied with mounting plate from OEM for ease of installation &

maintenance UL & FM Approved.

Providing and fixing of self illuminated / auto glow "EXIT" signs printed on

photoluminescent sheet containing self illuminated base chemical, of

9 NS-3 appropriate size not less than 400 x 150 mm, suspended from ceiling or fixed Each 5 778 3890

to the walls with accessories as required and as directed at site etc. complete

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated

10 17.5.2 with annealed copper conductor having XLPE insulation, steel wire armouring Mtr 485 173 83905

& FRLS outer sheath complete as required.

Supplying and fixing of following sizes of medium class PVC conduit along with

accessories in surface/recess including cutting the wall and making

goodthesamein caseofrecessed conduit as required.

Supplying, installation, testing & commissioning of addressable horn cum

strobe complete as required.

13 18.1.6 Electric Driven Pump

Supplying, installation, testing and commissioning of Electric driven Main Fire

(a) Pump suitable for automatic operation and consisting of following, complete in

all respects, as required :

Horizontal type, multistage, centrifugal, split casing pump of cast iron

(b) body & bronze impeller with stainless steel shaft, mechanical seal conforming

Suitable HP Squirrel cage induction motor, TEFC, synchronous speed

1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with

IP 55 protection for enclosure, horizontal foot mounted type with Class-'F'

insulation, conforming to IS-325.

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Siganture of Contractor

ICSI BOQ FIRE FIGHTING

S.N DAR- Description Unit Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts

etc. as required.

(e) Suitable cement concrete foundation duly plastered with anti vibration pads.

2280 Ipm at 56 m Head Each 1 331972 331972

14 18.2.6 Diesel Engine Pump

Supplying, installation, testing and commissioning of diesel enginedriven main

(a) fire pump suitable for automatic operation and consisting of following,

complete in all respects, as required : (Diesel Driven Pump)

Horizontal type, multistage, centrifugal pump of cast of iron body and

(b) bronze impeller with stainless steel shaft, mechanical seal conforming to IS

Suitable HP, 1500 RPM water cooled with radiator, diesel engine

conforming to relevant IS standard complete with auto starting mechanism, 12

124 volts electric starting equipment, diesel tank, exhaust pipe extended upto

10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0

mm thick aluminium sheet cladding, residential silencer, instruments and

protection as per standard specification, stop solenoid for auto stop in the

event of fault with audio indications, painted with post office red colour etc. as

M.S fabricated, common base plate, coupling, coupling guard, foundation bolts

etc. as required.

Suitable cement concrete foundation duly plastered and with anti vibration

2280 Ipm at 56 m Head Each 1 612065 612065

15 18.3.2 Jockey Pump

Supplying, installation, testing and commissioning of electric driven

(a) pressurisation pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (Jockey Pump)

Horizontal type, multistage, centrifugal pump Of cast iron body and bronze

impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.

Suitable HP squirell cage induction motor TEFC type suitable for operation on

(c) 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure,

horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Siganture of Contractor

ICSI BOQ FIRE FIGHTING

S.N DAR- Description Unit Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts

etc. as required.

Suitable cement concrete foundation duly plastered and with anti vibration

Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe

conforming to IS 1239 including welding, fittings like elbows, tees, flanges,

16 18.8 tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more coats of synthetic

enamel paint of required shade complete as required

Supplying and fixing Single headed internal hydrant valve With instantaneous

Gunmetal/StainIess Steel coupling of 63 mm dia with cast iron wheel ISI

marked conforming to IS 5290 (Type -A) With blank Gunmetal/StainIess Steel

cap and chain as required ::

18 18.9.1 Single headed Gunmetal Each 10 7646 76460

Supplying and fixing Single headed external yard hydrant valve With 1 NO. 63

mm dia instantaneous FM Gunmetal/StainIess Steel coupling and cast iron

wheel, ISI marked, conforming to IS 5290 (type A) With blank

Gunmetal/Stainless Steel cap and chain as required :

20 18.10.1 Single headed Gunmetal Each 2 7646 15292

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male

21 and female couplings duly bound with Gl wire, rivets etc. conforming to IS 636

(type-A) as required

22 18.16.2 Stainless Steel (Grade 304) Each 10 4448 44480

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Siganture of Contractor

ICSI BOQ FIRE FIGHTING

S.N DAR- Description Unit Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200

mm in height with air release valve on top and flanged connection to riser,

23 18.2 drain arrangement With 25 mm dia gun metal wheel valve With required Each 1 18244 18244

accessories, pressure gauge and paintingwith synthetic enamel paint of

approved shade as required.

Providing & fixing of pressure switch in M.S. pipe line including connection etc.

Providing & fixing flow switch in following sizes M.S. pipe including

connection etc as required.

Providing, fixing, testing & commissioning of installation control valve of cast

iron body, brass/bronze working parts comprising of water motor alarm,

bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell

to sound continuous alarm when the wet riser/sprinkler system activates,

27 18.24 pressure gauges, emergency releases, strainer, pressure switch, cock valve

complete with drain valve and bypass, test control box, ball valves, MS pipe of

required size, flanges, orifice plate, gasket etc of follwing sizes as required:

Supplying, installation, testing & commissioning of sprinkler flexiblepipe (UL

Listed) of stainless steel complete with 15 NPT on reducer thread with

maximum working pressure Of 175 PSI test pressure Of 875 PSI (Burst) With

29 18.25 branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm

NPT female thread with reducer, nipple, 2 side brackets, center bracket,

stockbar of following sizes complete as required.

Providing, installation, testing & commissioning of adjustable rosette plate for

15mm dia in white finish UL Listed or FM approved complete as required.

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6

32 18.11 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts,

washers, gaskets conforming to IS 13095 of following sizes as required :

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Siganture of Contractor

ICSI BOQ FIRE FIGHTING

S.N DAR- Description Unit Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Supplying, fixing, testing & commissioning of double flanged sluice valve of

rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked

complete with nuts, bolts, washers, gaskets and conforming to IS 780 of

following sizes as required :

Supplying and fixing orifice plate made out Of 6 mm thick stainless steel

(Grade 304) with orifice of required size to be fitted between flange & landing

valve of external and internal hydrants to reduce pressure at the outlet tothe

level of 3.5 kg/cm2 complete as required.

Providing, installation, testing and commissioning of non-return valve of

35 18.14 following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts,

nuts, washers etc.as required :

Supplying and fixing first-aid Hose Reel with MS construction spray painted in

post office red, conforming to IS 884 complete with the following as required.

20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -

2 as per IS: 12585

b (b) 20 mm nominal internal dia gun metal globe valve & nozzle.

c (c) Drum and brackets for fixing the equipmets on wall.

Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe

Supplying and fixing of fire brigade connection of cast iron body with gun metal

18.19 male instantaneous inlet couplings complete with cap and chain as reqd. for

suitable dia MS pipe connection conforming to IS 904 as required:

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type

sprinklers of rating 68 degree centigrade with required accessories :

a 18.21.1 Pendent Sprinkler Each 110 522 57420

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Siganture of Contractor

ICSI BOQ FIRE FIGHTING

S.N DAR- Description Unit Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

Supplying & fixing 63 mm dia gun metal short branch pipe With 20 mm

40 nominal internal diameter size nozzle conforming to IS 903 suitable for

18.82 instantaneous connection to interconnect hose pipe coupling as required:

a 18.82.1 Gun Metal Each 10 2416 24160

Providing, installation, testing and commissioning of stainless steel Y-

42 strainer fabricated out Of 1.6 mm thick stainless Steel, Grade 304, sheet

18.15 With 3 mm dia holes with stainless steel flange.

43 NS-4 Ms Red Diesel Tank for fire pump, Capacity: 200 litre Each 1 15500 15500

Supplying and fixing 15 mm dia MS flexible pipe with PVC coating along with all

ancillaries and accessories as required.

Providing and fixing,testing and commissioning of expansion Bellow,Material

Rubber and MS Flange,Thread Size As per customers requirement

46 NS-8 Air vent valve,Materieal: brass,PN-16,Rough Brass Each 3 549 1647

Specification : Providing and fixing of approved make 120mins Fire Rated

doors tested and certified design as per IS 3614 part-2 & BS 476 part-20 & 22 at

NABL Approved Laboratory & CBRI for its stability and integrity .

Recommended fire door design should be similar to earlier test evidence from

NABL OR CBRI Approved Laboratory with or without vision lite for maximum

fire rating of 2hrs . Doors will be finished in Powder Coating with film

thickness of 60 mincrons approx. in desired RAL Shades. The manufacturer

company is a member of NFPA and ISO 9001-2015 cerified . Door frame shall

47 be Double rebate profile of minimum size 100mm X 57 mm made out of 1.5mm

minimum thick galvanized steel sheet. 100x57 Frames will be mitered jointed

and field assembled with miterd joint. The frames will be finished with Powder

Coating in desired RAL ShadeDoor leaf shall be minimum 46mm thick fully

flush double skin door with or without vision lite. Door leaf shall be

manufactured from 0.8mm minimum thick galvanised steel sheet. The internal

construction of the door should be rigid reinforcement pads for receiving

appropriate hardware. The infill material shall be honey Comb craft paper. All

doors shall be factory prepped for receiving appropriate hardware and provided

with necessary reinforcement .

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Siganture of Contractor

ICSI BOQ FIRE FIGHTING

S.N DAR- Description Unit Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

A NS-9 Double Leaf-: Honeycomb - - Powder Coating Each 6 29940 179640

49 NS-10 Electric pannel for Fire Fighting Pump

Main Incomer With Metering & Control

100A FP MCCB 25KA With Microprocessor based release having S/C & O/L

Electrolytic Grade Aluminium Busbar with PVC Heat Shrinkable Colour

Coated Sleeve Suitable for Incoming & Outgoing Feeders (Main Busbar 200A

Outgoing Section - -

4P 16A 10kA Thermal Magnetic Release based MCB (With S/C,O/L

TOTAL CARRIED TO SUMMARY Set 1 258500 258500

4 buckets set with sand, self-supported M.S. stand i/c shed duly painted

NS-11 with red colour as per IS.

Providing and fixing of carbon-di-oxide type fire extinguishers consisting of

welded M.S. cylinderical body, squeeze lever discharge valve fitted with

pressure indicating guase ingernal discharge tube 30 cms long high pressure

51 discharge hose, discharge nozzle, suspension bracket conforming ro IS:15683

finished externally with re enamel paint and fixed to wall with brackets

NS-12 complete with internal charge.

A Capacity 6 Kg. Nos. 8 15227.1 121816.8

Providing and fixing ABC Powder type fire extinguishers consisting of welded

M.S. cylinderical body, squeeze lever discharge valve fitted with pressure

indicating guase internal discharge tube 30 cms long high pressure discharge

52 hose, discharge nozzle, suspension bracket conforming to IS:15683 finished

externally with re enamel paint and fixed to wall with brackets complete with

NS-13 inernal charge.

A Capacity 5.0 Kg. Nos. 20 6852 137040

Providing and fixing of ISI marked (IS: 940) portable chemical fire extinguisher,

water (gas pressure) type capacity 9 litres with gun metal cap and nozzle and

complete in all respects including initial fill and wall suspension brackets as

NS-14 required as oer soecifications.

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Siganture of Contractor

ICSI BOQ FIRE FIGHTING

S.N DAR- Description Unit Qty DSR Rate DSR Amount NDSR Rate NDSR Amount

A Capacity 9 Kg. Nos. 8 12182 97456

Total Amount 4337199.8

Total Amount 4337199.8

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Siganture of Contractor

DSR REF Description Unit QTY. DSR Rate DSR Amount NDSR Rate NDSR Amount

Design, manufactures, supply,installation, sting

,commissioning, approvals / laisoning (All local /

1 state/ central statutory bodies) and handing over

in satisfactory working conditions of elevators

as per specification.

13 Passenger min. Capacity,

Travel Geight G+5

TOTAL CARRIED TO SUMMARY 0 1788296.413

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

COST OF EXTERNAL ELECTRICAL WORK

S. No. Description of item

Schedule Item DSR - 2022 Non-Schedule Item

A TRANSFORMER 0 6,27,923.69

D MAIN LT PANEL 0 11,43,576.10

H EXTERNAL LIGHTING 0 4,20,649.13

TOTAL COST FOR DSR + MR 70,37,275.89

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ EXTERNAL ELECTRICAL

S.No. Description of Items Unit QTY. DSR Rate DSR Amount NDSR Rate NDSR Amount

DSR - 2022 DSR - 2022 Non DSR Non DSR

Supply of 150 kVA, 11kV/433V OLTC STEP DOWN

TRANSFORMER,(Copper double wound, oil immersed

naturally cooled, core type trf) and neutral brought out for

earthing. The transformer shall be provided with (+) 7.5%

and (-) 7.5% in step of 2.5% ON load tap changer on HT side

MR - 1 as per IS : 11171 - 1985 IEC 60726 & ECBC building code

2017. HT side cable termination box shall be suitable up to

11 KV, 3 C x 240 mm2 XLPE cable. LT side cable termination

box shall be suitable up to 3.5 x 300 mm2 XLPE

cablecomplete in all respect as required as per

TOTAL CARRIED TO SUMMARY 1 627924 6,27,924

PROVIDING, INSTALLING, TESTING AND COMMISSIONING

OF 'SILENT TYPE' DIESEL GENERATING SET

Supply, installation, testing and commissioning of 125 KVA

prime continuous (actual) rating radiator cooled type

diesel generating set (alternature at 47 deg C

temperature) with AMF pales and Acoustic Enclosure along

with electronic governor, base frame, Alternator (capable

of delivering true 125 kVA output), Static Excitation System,

Lube Oil System, Batteries, Battery charger, Instrumentation,

min. 200 liter day oil fuel tanks, Silencer with bellows, alarms,

Engine Control Panel, AVM pads, AVR Panel,Terminal

arrangements in termination box suitable UP to 3.5cx300

sqmm aluminium cables with all other associated

equipment / work as per specifications.

TOTAL CARRIED TO SUMMARY 1 1464335 14,64,335

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ EXTERNAL ELECTRICAL

S.No. Description of Items Unit QTY. DSR Rate DSR Amount NDSR Rate NDSR Amount

DSR - 2022 DSR - 2022 Non DSR Non DSR

Supply, Installation, Testing and Commissioning of floor

mounted metal clad, 2mm thick, 11KV panel with 11 kV,

630A, 35 KA TP VCB with totally enclosed & electrically

interlocked, horizontal drawout, horizontal isolation type

breaker as per IS 13118, as per specifications, having

capacities as mentioned below, single break, trip free

mechanism, manually charged and auto/manually closing

breaker suitable for use on 11kV, 3Phase, 50Hz A.C. supply,

complete with self contained electrically interlocked rack

in and rack out mechanism, air insulated & encapsulated

aluminium bus bars of 630 Amp capacity, breaker featured

with mechanical ON/ OFF indicator with hand trip device,

spring release coil, shunt trip coil and auxiliary switch of

4NO + 4NC , PT 11kv/110volts , IDMT Relay and equipped

with following switchgears and accessories i/c connections

and Outgoing shall be suitable for 3Cx 240*sq.mm XLPE

11kV cable (cable entry from bottom/top/side) end

termination with heat shrinkable jointing material, Strip

heater with thermostat to prevent absorption of moisture

etc. as required.

1 no;s- (0-100A) ammeters, dual scale digital type &

selector switches for ammeters.

1 no;s- Microprocessor based numerical relay with O/L, E/F

and highset S/C protection compatible .

1 no;s- Set of Dual core dual ratio 3 CTs 100/5/5A of 15VA

burden and accuracy Class -1.0 for metering and class

5P10 for protection.

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ EXTERNAL ELECTRICAL

S.No. Description of Items Unit QTY. DSR Rate DSR Amount NDSR Rate NDSR Amount

DSR - 2022 DSR - 2022 Non DSR Non DSR

Power pack with 220 volt AC input & 24 volt DC continious

output suitable for closing/tripping/indication of HT panel

board with 2 nos. of 12 volts each maintenance free

batteries of 100(suitable) AH each, charging unit, capacitor

bank for emergency delievring for trip system complete

with suitable capacity of ammeter & voltmeter i/c

connections with 2.5 sqmm. FRLS insulated copper

conductor cable etc. as required.

Suitable for termination of 1 No. HT 3 C x 240 sq.mm XLPE

TOTAL CARRIED TO SUMMARY 1 857682 8,57,682

D MAIN LT PANEL

1 (MR - 4) MAIN LT PANEL (Transformer I/C) Qty 1

400A, 4P MCCB MPR BASED with 400 A FP Contactor 1

400/5A, 15VA, CL-1.0, HT-40, Metering, Resin

Cast, Current Tansformer

Multifunction Meter

Aux. Contact Block, 2NO+2NC

6A, 2P, 2 Way Selector Switch, with center off 60 degree

50A disconnecting type Neutral Link

2 GEN INCOMER -125 KVA Qty -1 1

400A, 4P MCCB MPR BASED with 400 A FP Contactor (

same as above 1a, metering and orotectoions, indications

Metering, Resin

Cast, Current Tansformer

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ EXTERNAL ELECTRICAL

S.No. Description of Items Unit QTY. DSR Rate DSR Amount NDSR Rate NDSR Amount

DSR - 2022 DSR - 2022 Non DSR Non DSR

Feeder Qty : 1 1

10A, 110V AC, Aux. Contactor with AC coil, K Model,

6A, 2P, 2 WAY Selector Switch, with center off 90 degree

OUTGOING-325A FP MCCB 25KA

Feeder Qty : 1 (GROUND FLOOR) 1

325A, 4P, 25kA, MCCB with TM Release

Standard Extended rotary handle for

4P Spreader (set of 4) for 100/160/250A

OUTGOING-63A FP MCCB 25KA

Feeder Qty : 4 For Iift,, Plumbing, External

lighting,Fire Fighting,

63A, 4P, 25kA, MCCB with TM Release

Standard Extended rotary handle for 100/160/250A

4P Spreader for 100/160/250A

50A disconnecting type Neutral Link

CAPACITOR PANEL -50KVAR

Feeder Qty : 1 1

Incomer - 100 AMP MCCB

15 KVAR Capacitor bank with MPP capacitor -2

10 KVAR Capacitor bank with MPP capacitor -1

5 KVAR Capacitor bank with MPP capacitor -2

Push button luminated RED/GREEN

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ EXTERNAL ELECTRICAL

S.No. Description of Items Unit QTY. DSR Rate DSR Amount NDSR Rate NDSR Amount

DSR - 2022 DSR - 2022 Non DSR Non DSR

7 AMF PANEL 1

AMF BASED AUTO START, AUTO STOP, AUTO LOAD

TRANSFER, PANEL WITH MANUAL PROVISION

TOTAL CARRIED TO SUMMARY 1 1143576 11,43,576

MR - 5 LT Building panel

Main Incomer With Metering & Control

325A FP MCCB 36KA With Microprocessor based release

having S/C & O/L Protection.

Ground Fault Module for E/F fault protection

Digital VAF Meter, Class 1.0, 96sq mm

Resin Cast CT 250/5A Class 1.0 For metering

Phase Indication Light Led R,Y,B 220V AC

Electrolytic Grade Aluminium Busbar with PVC Heat

Shrinkable Colour Coated Sleeve Suitable for Incoming &

Outgoing Feeders (Main Busbar 400A FP Aluminium)

Outgoing Section - -

4P 100A 25kA Thermal Magnetic Release based FP

MCCB (With S/C,O/L Protection) Qty 1 1

4P 63A 16kA Thermal Magnetic Release based MCCB

(With S/C,O/L Protection) 19

TOTAL CARRIED TO SUMMARY Set 1 871628 8,71,628

MR - 6 Lift Panel

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ EXTERNAL ELECTRICAL

S.No. Description of Items Unit QTY. DSR Rate DSR Amount NDSR Rate NDSR Amount

DSR - 2022 DSR - 2022 Non DSR Non DSR

Main Incomer With Metering & Control

63A FP MCCB 25KA With Microprocessor based release

having S/C & O/L Protection.

Electrolytic Grade Aluminium Busbar with PVC Heat

Shrinkable Colour Coated Sleeve Suitable for Incoming &

Outgoing Feeders (Main Busbar 200A Aluminium)

Outgoing Section - -

KAThermal Magnetic Release based MCB (With S/C,O/L

TOTAL CARRIED TO SUMMARY Set 1 132487 1,32,487

MR - 7 External Lighting Panel

Main Incomer With Metering & Control & Timer

63A FP MCCB 25KA With Microprocessor based release

having S/C & O/L Protection.

Electrolytic Grade Aluminium Busbar with PVC Heat

Shrinkable Colour Coated Sleeve Suitable for Incoming &

Outgoing Feeders (Main Busbar 200A Aluminium)

Outgoing Section -

2 Nos TPN 32A 10kA Thermal Magnetic Release based

MCB (With S/C,O/L Protection) 1

TOTAL CARRIED TO SUMMARY Set 1 136671 1,36,671

TOTAL CARRIED TO SUMMARY Set 1 11,40,787

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ EXTERNAL ELECTRICAL

S.No. Description of Items Unit QTY. DSR Rate DSR Amount NDSR Rate NDSR Amount

DSR - 2022 DSR - 2022 Non DSR Non DSR

Supply, installation, testing and commissioning of the

following HT & LT cables or approved equivalent:

11 KV Grade HT Cable

Supply of following sizes of XLPE insulated PVC sheathed

aluminium conductor armoured power cable of 11kV

grade H.T. Cable shall be of earthed grade and shall be of

stranded construction, comply to IS 8130., and with

electrolytic grade purity aluminium conductor, shall be

manufactured & tested in accordance with IS : 7098 (Part

II). Outer sheath shall be of tough, PVC compound as per

IS: 5831 and shall be extruded over the armouring.

etc.complete as per technical specifications.

LAYING OF HT CABLES

Laying of 11 kV Grade HT Cables

Laying of one number XLPE power cable of 11 KV grade of

following size in in Ground, Surface and Cable Trays and

Load in Hume Pipe/Duct. etc.complete as per technical

specifications.

DSR-8.1.2 Above 120 sq. mm and upto 400 sq. mm Mtr 30 577 17310

11 kV HT CABLE END TERMINATION

Supplying & making indoor cable end termination with

Heat shrinkable jointing kit complete with all accessories,

bimetallic washers and including lugs for the following size

of 3 core XLPE aluminium conductor cable of 33kV grade

complete as required.

DSR-10.1.3 3 C x 240 sq.mm 11 KV XLPE (E) cable (indoor type) SET 4 3549 14196

Supplying & making Outoor cable end termination with

Heat shrinkable jointing kit complete with all accessories,

bimetallic washers and including lugs for the following size

of 3 core XLPE aluminium conductor cable of 33kV grade

complete as required.

DSR-10.2.3 3 C x 240 sq.mm 11 KV XLPE (E) cable (indoor type) SET 4 6293 25172

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ EXTERNAL ELECTRICAL

S.No. Description of Items Unit QTY. DSR Rate DSR Amount NDSR Rate NDSR Amount

DSR - 2022 DSR - 2022 Non DSR Non DSR

TOTAL CARRIED TO SUMMARY 56678 1,06,687

Supply of XLPE insulated, armoured heavy duty electric

cable with aluminium conductor, 1100 volts grade, cross-

sectional area as follows

Laying of one number additional PVC insulated and PVC

sheathed / XLPE power cable of 11 KV grade of following

size direct in ground including excavation, sand

cushioning, protective covering and refilling the trench etc

DSR-7.2.2 Above 35 sq. mm and upto 95 sq. mm Mtr 57 304 17,328

DSR-7.2.3 Above 95 sq. mm and upto 185 sq. mm Mtr 120 304 36,480

DSR-7.2.4 Above 185 sq. mm and upto 400 sq. mm Mtr 130 356 46,280

Supplying and making end termination with brass

compression gland and aluminium lugs for following size of

PVC insulated and PVC sheathed / XLPE aluminium

conductor cable of 1.1 KV grade as required.

DSR-9.1.1 2 core, 6 Sq.mm. Sets 20 240 4,800

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

BOQ EXTERNAL ELECTRICAL

S.No. Description of Items Unit QTY. DSR Rate DSR Amount NDSR Rate NDSR Amount

DSR - 2022 DSR - 2022 Non DSR Non DSR

TOTAL CARRIED TO SUMMARY 365515 8,53,442

I EXTERNAL LIGHTING

Supply, installation, testing and commissioning of the

following lighting fixtures & poles or approved equivalent:

Outdoor street light fixture with 45W LED complete with all

accessories as required.automatic On-Off switching system

Supply Installation Testing Commissioning of GI 6.0 mtr

octagonal Pole with 1200mm single Arm with inbuilt

weather proof junction box including CC foundation (1:2:4

cement concrete (1 cement : 2 coarse sand : 4 graded

stone aggregate 40mm nominal size) including excavation

& refilling etc minimum size 350mm x350mmx500mm with

300mm x 300mm x10 mm Base plate including 4 Nos. heavy

duty foundation nut bolts with suitable length as required

and complete in all respect as per direction of Engineer in

Charge as complete required

TOTAL CARRIED TO SUMMARY 0 4,20,649

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

COST OF INTERNAL ELECTRICAL WORK

S. No. Description of item DSR Item Non-Schedule Item Total Amount

S. No. Description of item DSR Item Non-Schedule Item Total Amount

A Distribution Boards 409369 67357 476726

B HOT DEEP GI CABLE TRAYS & GI RACEWAYS 994413 0 994413

C EARTHING 207182 0 207182

D INTERNAL WIRING: 1766017 0 1766017

E LIGHTING FIXTURE AND FANS 671971 671971

F UPS/Inverter System 0 736492 736492

G Exhaust fans 21756 21755.838

H LIGHTNING ARRESTER 0 56233 56233

TOTAL COST FOR DSR + MR 4930789.923

Digitally signed by DEEPAK

Signature of NBCC Date: 2024.08.07 18:49:56 IST Signature of Contractor

INTERNAL ELECTRICAL BOQ

DSR Ref Description Unit QTY. Unit Rate DSR Amount Unit Rate NDSR Amount

DSR - 2022 DSR - 2022 Non DSR Non DSR

A DISTRIBUTION BOARDS

Supplying and fixing following way, horizontal type three pole and

neutral, sheet Steel, MCB distribution board, 415 V, on surface/

recess, complete With tinned copper bus bar, neutral bus bar,

bar, din bar, interconnections, powder painted including earthing

as required. (But without MCBIRCCB/lsolator)

Supplying and fixing following way, Single pole and

neutral, sheet Steel, MCB distribution board, 240 V, on surface/

recess, complete With tinned copper bus bar, neutral bus bar,

bar, din bar, interconnections, powder painted including earthing

as required. (But without MCBIRCCB/lsolator)