Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.1 LAccepted-AOC D 154 ADARSH NAGAR JABALPUR MP 482001 | JABALPUR | MADHYA PRADESH | 482001 | L1 | Accepted-AOC Lowest amount quoted | |
| 2 | L2₹34.0 L+₹51,083.90 (1.53%)Rejected-Finance 114 BARH CHONDI TOWN BARH DISTT PATNA BIHAR PIN 803213 | PATNA | BIHAR | 803213 | L2 | Rejected-Finance Second lowest amount quoted | |
| 3 | L3₹35.2 L+₹1.7 L (5.12%)Rejected-Finance RZ 382 3RD FLOOR GALI NO 11B KAILASH PURI EXTN PALAM COLONY PALAM VILLAGE NEW DELHI 110045 | SOUTH WEST | DELHI | 110045 | L3 | Rejected-Finance Third lowest amount quoted | |
| 4 | L4₹37.1 L+₹3.6 L (10.7%)Rejected-Finance R O 24 GOKALPUR MAIN ROAD JABALPUR MP 482001 | JABALPUR | MADHYA PRADESH | 482001 | L4 | Rejected-Finance Fourth lowest amount quoted | |
| 5 | L5₹37.2 L+₹3.7 L (11.1%)Rejected-Finance 114 BARH CHONDI BARH PATNA BIHAR 803213 | PATNA | PATNA | BIHAR | 803213 | L5 | Rejected-Finance Fifth lowest amount quoted |
Tender Value
₹43.0 L
EMD Value
₹86,000
Closing Date
27 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col P Aditya Deepak, GE
Garrison Engineer (East), Near COD Estate, Ranjhi, Jabalpur (MP)-482011
CERTAIN B/R MAINT WORK FOR OFFICE BLDG, REPAIR TO AREA DRAIN FOR OFFICE BLDG (OTM) AND OTHER WORKS AT CDA JABALPUR UNDER AGE B/R-I OF GE (EAST) JABALPUR
2023_MES_604634_2
8544/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer (East) Jabalpur
D a (i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jabalpur
₹86,000
Yes
8 Jan 2024
4 Nov 2023
29 Nov 2023
4 Nov 2023
27 Nov 2023
13 Nov 2023
4 Nov 2023 - 7 Nov 2023
Amount
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below or above ground level complete all as directed.
M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in floor finished even and smooth without using extra cement complete all as specified and directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed.
Virified Ceramic tiles (light shade) 10 mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but n.exc 1.00 sqm, in floors etc laid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Virified Ceramic tiles (light shade) 10 mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but n.excg 1.00 sqm, in skirting etc laid over & including 10 mm rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L non skid ceramic coloured & designer tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors/skirting laid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white cement to match complete all as specified and directed.
M&L glazed ceramic coloured & digital tiles 350 x 250 x 7/450 x 350/7 mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specifed and directed.
M&L Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of old kota stone complete with 20 mm thick CM 1 : 6 bedding complete all as specified and directed.
M&L Machine cut kota stone slab flooring 20-25 mm thick in riser of steps, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of old kota stone complete including rendering 10 mm thick CM 1:4 complete all as specified and directed.
Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including 15mm thick screed bed in CM 1:4 including dismantling of old granite stone complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection, complete all as specified and directed.
Demolition of brick or stone masonary built in cement mortar or cement lime motar complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) complete all as specified and directed.
Taking down cement plaster or cement lime plaster from brick walls including racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed.
M&L for Rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.
Excavating in post holes in soft/loose soil (or similar holes) each n.exc 0.5 cum getting out, returing, filling in and ramming earth or broken ruble mixed with earth around, in layers n.exc 25 cm, watering, and removing surplus soil to a distance n.exc 50 M and making good surface complete all as specified and directed.
Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in loose/soft soil complete all as specified and directed.
M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundation, mass concrete, sub base etc complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate in foundation, filling & mass concrete all as specified and directed.
M&L for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate in channel & drains complete all as specified and directed.
M&L brick work with fly ash brick modular size in cement mortar 1:4 straight or curved on plan exc 6m mean radius complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate in coping complete all as specified and directed.
M&L 15mm thick rendering on fair faces of brick wall in CM 1:4 on fair face of brick work or concrete surface finished the surfce even & smooth without using extra cement complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/loose soil complete all as specified and directed.
Removing excavated material n.exc 50mtr and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified and directed.
M&L for extra froming fair finished in drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed.
Reinforced concrete pipes, class NP3 Bore of pipe 600 mm, laid and jointed complete with collars complete all as specified and directed.
M&L preparing surface of newly plastered walls and applying two coats of oil bond distemper over alkali resistant priming preparatory to distempering complete all as specified and directed.
M&L preparing surface of old plastered walls and applying two coats of oil bond distemper over alkali resistant priming preparatory to distempering complete all as specified and directed.
M&L Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
M&L 3mm thick wall care putty on wall complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm and including wall care putty of 1 mm thickness over old decorated plastered surface to prepare the surface even and smooth complete all as specified and directed.
Taking down chowkats or frames n.exc 1.5 Sqm each (without taking off shutters from the frame) & removing from site complete all as specified and directed.
Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each (Without taking off shutters from the frame) & removing from site complete all as specified and directed.
S&F 2nd class teak Hard Wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
S&F 35 mm thick, 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) etc complete all as directed by Engr-in-Charge.
S&F 35 mm thick, plain framed panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces complete all as specified and directed. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated.
S&F factory made soild PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2010) complete all as specified and directed.
S&F Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30 mm thick (stiles ), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specifications and drawings complete all as specified and directed.
M&L for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engr-in-Charge.
Supply and fixing Anodised Aluminium grills of deco grill No DG-916 pattern thickness of grill 7.5 mm complete all as specified and directed.
S&F sliding interlock for windodw in each shutter (45.5mm x 28mm) complete all as specified and directed.
Supply and fixing 5.5 mm Sheet glass, ordinary quality and glazing exc 0.5 Sqm in each pane complete all as specified and directed.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and with stainless steel wire staples complete all as specified.
M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
M&L 3mm thick frosted glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane at one side complete all as specified and directed.
S&F 100 mm Butt hinges, extruded alu minium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F 75 mm Butt hinges, extruded alu minium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F 100 mm long Mild steel butt hings medium weight complete all as specified and directed.
S&F 75 mm long mild steel butt hings medium weight complete all as specified and directed.
S&F 150 mm long extroded aluminium alloy handles, fabricated type anodized complete all as specified and directed.
S&F 100mm aluminium handles, cast type, anodised complete all as specified and directed.
S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repair 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F in repair M S 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in repair floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring with rubber shoe over all length as cover plate 150 mm complete as in repairs.
M&L for Preparing of new surface of wood and wood based materials of any description not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of new steel surfaces of any description and apply two coat of synthetic enamel paint over a coat of red oxide not other wise described over 10 cm width or girth complete all as specified and directed.
S&F in repairs water closet vitreous China (squatting pan) complete including provision of lime concrete bedding vitreous china squatting pan orrisa pattern of size 580 x 440mm, white, with CI 100mm bore P or S trap front or back inlet and foot rest any pattern exc flushing cistern complete all as specified and directed.
S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repairs vitreous China Wash Hand Basin, white, flat back size 550 x 400mm including cutting for and pinning in ends of brackets including brackets but exclusive taps,waste, chain and leg porcelain stop pan complete all as specified and directed.
S&F in repairs Bib tap 15mm standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs Pillar taps 15mm of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs 15mm bore, pillar taps, fany type chromium plated, cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed.
S&F in repairs 15mm bore Bib tap cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repairs 15mm bore, angle/stop cock, fancy type, chromium plated,cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs 15mm bore, Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed.
S&F grating fixed in repair 100mm dia complete all as specified and directed.
S&F in repairs 15mm size PVC connection with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints complete all as specified and directed.
S&F in repair 75 mm dia, PVC bend complete all as specified and directed.
S&F in repair 110mm dia PVC bend with access door complete all as specified and directed.
S&F in repair 110mm bore PVC junction single 'T' equal with provided access door complete al as specified and directed.
S&F in repair PVC 75mm dia (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed.
S&F in repair PVC 110mm dia (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed.
S&F in repair PVC (SWR) vent cowl 110mm dia complete all as specified and directed.
Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
S&F in repairs UPVC rain water pipes in any length with or without ears with cement joints fixed to walls 100 mm dia complete all as specified and directed.
S&F in repairs UPVC rain water pipes in any length with or without ears with cement joints fixed to walls 75 mm dia complete all as specified and directed.
Supply and fixing in repair 32mm bore low density polu ethylene pipes (LDPE), 1.0 mtr long of pressure rating 6Kgf/Sqcm fixed to wash hand basin complete all as specified and directed.
Supply and fixing in repair waste fittings, brass chromium plated for glazed ware sinks, basins, urinals etc with long screw shank and fly nuts, flange end bedded in red lead cement and other fixed complete all as specified and directed.
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including edding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair 75 mm dia PVC (SWR) floor trap with CP grating including jointing with solvent cement complete all as specified and directed.
Taking down 25 mm dia steel tubing and connections, including cleaning for refixing complete all as specified and directed.
Refixing old 25 mm dia steel tubing and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and directed.
M&L for 25 mm dia steel water tubes, 'medium grade', galvanised, with all fitting; fixed to wall or laid in trenches complete all as directed.
Taking down 20 mm dia steel tubing and connections, including cleaning for refixing complete all as specified and directed.
Refixing old 20 mm dia steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) complete all as specified and directed.
M&L for 20 mm dia steel water tubes, 'medium grade', galvanised, with all fitting; fixed to wall or laid in trenches complete all as directed.
Taking down 15 mm dia steel tubing and connections, including cleaning for refixing complete all as specified and directed.
Refixing old 15 mm dia steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) complete all as specified and directed.
M&L for 15 mm dia tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including necessary cutting, chasing, pinning and making surface good as directed.
Supply and fixing in repair gun-metal, globe or gate valves 20mm bore dia, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply and fixing in repair gun-metal, globe or gate valves 25mm bore dia, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Dismantling water tank exc 500 and n.exc 1000 ltr capacity complete all as specified and directed.
S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I, including 25 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. Note : PVC tank shall be ISI marked and having two layers.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs complete all as specified and directed.
S&F in repairs tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as speecified.
M&L Machine pressed precast coloured concrete interlocking paver block any shape and size of 60mm thickness with grey cement and pigment confirming to IS 15658-2006, M-35 grade complete all specified and directed.
M&L for crushed stone sand/ river sand as in cushening layer below interlocking paver tiles well compacted to a true surface complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in Sub base of flooring complete all as specified and directed.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement and 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall no to more than 5mm) including making drainage opening wherever required complete all as specified and directed.
Demolition of RCC in any description and any position (reinforcement cut as required to facilitate demolition) complete all as specified directed.
M&L precast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed.
Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Cutting into existing manholes for connecting new drains, 150 mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.
M&L cutting out cracks to V section in existing roofs/wall or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.
M&L PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in filling under undulation of roof top/chajjas complete all as specified and directed.
M&L for rendering 10mm thick plaster in CM (1:4), on the top of chajjas, concrete surfaces, finished even and smooth (without using extra cement) and mixed with integral WPC as per manufacturer's instructions but not less than 3% by weight of cement complete all as specified and directed. Note : WPC shall be measured & paid separately under relevant item.
Supply only Integral water proofing compound (ISI mark) complete all as specified and directed.
Demolition and taking out of cinder/lime/lean concrete from sunken portion of WC and bath and deposited complete all as directed at site.
M&L PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in sunken floor, average thickness 40mm and making adequate slop towards spout pipe etc complete all as directed at site.
S&F in repair vitreous china bowl urinal flat back of size 430 x 370 x 340 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waiste pipe) complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre pulp insulation etc) any thickness including cover fillets complete all as specified and directed.
Supply and fixing 6mm thick non asbastos fibre cement building boards fixed or laid/insertedto timber/GI/Aluminum framework fixed in ceiling flat or sloping over and including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleaves and screws at 450mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and wed of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and incl ceiling section not less than 1.2m length of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel at 457mm centre to centre including hangers of 6mm dia GI (uptpo 1200mm length) adjusting level fixed to roof slab or purlinsby means of cleats made out of GI flats 40 x 3mm size 60mm long and expansiion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.
Supplying and providing water proofing treatment over cleaned roof surface with Polymeric standard water proofing membrane over and including rendering 15 mm thick in cement mortar 1:4 mixed with integral WPC @ 3% by weight of cement comprising of the following for Non Approachable roof :- (i) Cleaning and sweeping and washing down with water to remove all dust etc from plastered roof surfaces/walls etc. (ii) Applying a coat of hot air blown bitumen of grade 85/25 grade confirming to IS-702 @1.2Kg/Sqm over a coat of bitumen primer @ 0.30 Kg/Sqm on prepared surface. (iii) One layer of polymeric water proofing membrane of weight not less than 3Kg/Sqm centre core of HM HDPE film of thickness 90 micron sandwiched with high polymeric high molecular and fusible film with 100mm over laps with sides and ends. The over laps shall be sealed by flame including vertical surfaces after cutting necessary grooves and making good with PCC gola 1:2:4 type B-1 etc adhere to hot blown bitumen all as per manufactures instructions. (iv) Over membrane applying a coat of hot blown bitumen of grade 85/25 confirming to ISD-702 @ 1.2 Kg/Sqm. (v) Two coats of aluminium pait shall be applied after the surfaces dry.
S&F in repair stainless steel kitchen plate rack moulded finish, weight not less than 8.7 Kg of size 910 x 760 x 250mm maded with brass screws of approved make and to be fixed on wall with rawl pluf and brass screws complete all as soceified and directed.
S&F in repair Soap dish, cast copper alloy chromium plated of approximate size 160 x 160 x 90mm complete all as specified and directed
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed.
S&F self flushing urinal censor only (automatic battery oprated) complete and all as specified and directed.
S&F steel work in tabular truss and tubelar post including special shaped washer etc complete using ERW or induction butt welded tubes conforming IS:1161-1979 grade St-240 complete all as specified and directed.
S&F MS Plates (plaines or chequered) square cut or notched (forming holes with riveted, bolted or welded attechment) Fe 410 -W (Gde -E -250) qyality -B complete all as specified and directed.
S&F 12mm dia MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other,or screwed bothends,each screwed end to be fitted with washers and one hexagonal or square nut, but lenth of bolt exc 5cm but n.exc 10 cm complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI Based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 including two coates of synthetic enamel paint over one coat of primer red oxide - S&F complete all as specified and directed.
Schedule of credit amount of Rs. 39,802.50 to be deducted during AOC.
a k builders
A S CONSTRUCTION CO.
m/s R K SETHI
MAA SHARDA CONSTRUCTION
M/S CHETAN PRAKASH GOYAL
Goodluck Enterprises
Chetna Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .