SPECIAL REPAIR TO BLDG NO. T-78,T-79,TR-02,TR-13 AND P-104 WITHIN AOR OF AGE B/R-I AT AKHNOOR MIL STN UNDER GE(S) AKHNOOR

Amount

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement ,in cement mortar1:6, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces ,finishing the surface even and smooth without using extra cement in cement mortar 1:4, mixed with water proofing compound @ 3% by weight of cement as per manufacturer's instruction, complete all as specified and directed.(Note: cost of WPC included in this item)

Demolition of cement concrete (unreinforced) in ground floors and paving n-exc 15cm thickness ( below or above ground floors.) , complete all as specified and directed.

M&L for 50 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection and providing the joints throughout the thickness, filled with mastic filling comprising bitumen 85/25 grade and sand mixture 1:3 by weight,finishing the surface even and fair without using extra cement, complete all as specified and directed .

M&L plain cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregates) ,25mm thick as in sub-base of flooring, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D-2( using 40mm graded crushed stone aggregates ) as in sub base of flooring including necessary form work complete all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust, etc and applying cement slurry over concrete surfaces @ 3Kg/Sqm, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick laid over 20 mm thick screed bed in cement mortar 1:6 and jointing with grey cement slurry mixed with pigment including rubbing and mirror polishing with machine as on stair shelves etc complete all as specified and as directed.

M&L for machine cut kota stone 18-20 mm thick in skirting/dado etc laid over 10 mm thick back coat in cement mortar 1:4 and jointing with grey cement slurry mixed with pigment including rubbing and mirror polishing complete all as specified as in directed .

M&L for Makrana white marble work (table rubbed and polished), 18-20mm thick, as in steps, jambs, pillars, window-cills, cooking platforms and like with 20mm thick screed bed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of marble, complete all as specified and as directed by Engineer-In-Charge.

Taking down chowkhat or frame with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking off shutters from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each , complete all as specified and directed.

S&F of pressed steel frame for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc., with size of frame 125x60mm, complete all as specified and as directed .

M&L for plain cement concrete 1:3:6, type C-0, (using 12.50mm graded crushed stone aggregate), nominal mix, as in cills, steps, bed plates and in hold fasts or filling in hollow of steel frame, including necessary form work, complete all as specified and as directed.

S&F factory made, 35 mm thick plain framed panelled shutter (any no. of panels) of second class hard wood rail and style with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS : 1003 Part I, klin seasoned and chemically pressure treated, all as specified and directed.

S&F glazed and skelton shutters using 2nd class hard wood 35mm thick open rebated and prepare to receive glass or gauge etc edges of framing plain and chamfered or fitted cut or mitered beads for securing glass size of member of shutter as specified in SSR Part-I Section 8, clause 8.24 and divided in square complete all as specified.

S&F factory made steel window, box type, using ERW hollow 'P' section, comprising double frame for and including gauged and glazed skeleton shutter, jointed internally with flat iron 40x4mm complete including grill/ guard bars of 8mm square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs etc, complete all as specified and as shown in drawing No- CEUZ/TD-1304, sheet No- 1/3 to 3/3 and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm each pane , complete all as specified and directed.

S&F 4mm thick figured glass pin head type glazed with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F for glavanised mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvnaised wire staples, complete all as specified and directed.

S&F aluminium anodised barrel tower bolt (ISI marked) of extruded section and fixed, length of bolt 150mm, complete all as specified and directed.

S&F aluminum alloy, anodized sliding door bolt (ISI marked) with hasp staple( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast aluminium alloy 250 mm long , complete all as specified and directed.

S&F extruded aluminum alloy handles (ISI marked) 150mm size fabricated type anodized complete all as specified.

S&F floor doors stoppers (ISI marked) of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor 150mm long, complete all as specified and directed.

S&F 300mm ordinary rat rail rod pattern spring (ISI marked) including roller plate complete with fixing mild steel spring, complete all as specified and directed.

S & F butt hinge (ISI marked), medium weight cold rolled mild steel 100mm long to pvc door etc, complete all as specified and directed.

M&L for preparation of new or previously untreated wood or wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying two coats of synthetic enamel paint over one coat of zinc chrome primer, complete all as specified and as directed .

M&L for preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying one coat of synthetic enamel paint , complete all as specified and as directed .

M&L for brick work with sub class 'B' bricks straight or curved in plane exc 6cm mean radius built in cement mortar 1:6, including demolition of existing brick/stone work complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position, complete all as specified and as directed by Engineer-In-Charge.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, Fe-410W (Gde E-250) quality B, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastering and fixing complete.

M&L for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe 410-W (Gde- E- 250) quality-A, complete all as specified and as directed by Engineer-In-Charge.

S&F mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde- E- 250) quality-B, complete all as specified and as directed by Engineer-In-Charge.

S&F mild steel work for wind tie,wall tie, hooks for hanging fan, plane angle cleat for securing purlins to steel trusses or rafters , gusset plate similar work conforming to Fe-410-0 or Fe-310-0. Complete all as specified and as directed.

S&F mild steel screw bolts (machine made) (ISI marked) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30cm long, dia of neck 12 to 20mm, complete all as specified and as directed by Engineer-In-Charge.

Dismantling wrought iron or mild steel work any description.

Supply and fixing ceiling board 4.0mm thick, designer, in ceiling fixed as per manufacturer’s instructions, including powder coated galvanised iron snap grid frame work of main and tee (weight not less than 240gm/Rm), angle (weight not less than 217 gm/Rm), grid size 595x595mm, for false ceiling all as specified, including suspender wire of size 4.0mm dia of galvanised iron adjusting level fixed to roof slabs by means of ceilling cleats made out of galvanised iron wire of 4.0mm dia, length as required at site incl hooks, fastners, plate etc as required including dismantling of existing wall and ceiling boards/insulation boards/ slabs/ blankets, any thickness, complete all as specified and as directed by Engineer-In-Charge.

S&F 4.0mm dia plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured),including taking down existing wires complete all as specified and as directed by Engineer-In-Charge.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and as directed by Engineer-In-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified, complete all as specified and as directed by Engineer-In-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engineer-In-Charge.

M&L non-skid ceramic coloured designer pattern tiles 300x300mmx7mm thick in floors etc.set jointed in neat cement slurry and pointed in white cement or coloured cement to match etc,including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6, including dismantling of existing floor hearth or wall tiling with cement mortar bedding but not backing and removing complete all as specified and directed.

M&L glazed ceramic coloured designer pattern tiles 350x250x7mm / 450mmx 300mmx7mm thick on vertical surface such as skirting, dado etc. set and jointed in white colour cement,including rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 as backing coat for tiles including dismantling of existing wall tiling with cement mortar backing and removing complete all as specified and directed.

M&L for repairing RCC projection chajjas, roof, facia etc. by necessary preparation, scraping, cutting, chiseling derusting and cleaning exposed reinforcement surfaces of damaged, loose RCC surfaces with cement concrete 1:1.5:3 using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2Kg per Sqm but n.exc 3Kg/Sqm (if required) with or without facia and finished with cement mortar 1:3 using coarse sand and work in patches area n.exc 5 Sqm and thickness RCC member n.exc 70mm incl necessary formwork and applying two coats of finishes to match with the existing surfaces at any height complete. (note: welded mesh to be paid separately)

S&F welded wire mesh with nails,screws etc to walls all as directed by the Engr-in -charge.

M&L for dismantling/taking down of existing roof treatment (including tiles of any type and size) and roughening surface of old concrete roof by picking sweeping clean and washing down with water to remove dust etc and applying roof treatment with the following specification : i. Applying cement slurry over concrete surfaces @ 3Kg/Sqm ii. Rendering 15mm thick in cement mortar (1:4) mixed with water proffing compound as per manfactures instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and evn including curing the plastered surfaces for 7 days by ponding of water over the roof (leveling course) iii. Applying evenly one coat of cold bituminous primer conferming to IS 3384-1986 @ 0.40 Kg per Sqm on the cleaned plastered surfaces iv. Applying evenly one coat of blown hot bitumin of grade 85/25 @1.2Kg per Sqm primed surfaces v. Applying a layer of APP base polymerie membrane, 3mm thick (minimum) weighing 3.00 Kg per sqm reinforces) with polyster non woven fabric wighing not les than 160 gms per Aqm by torch application. The overlap shall be not less than 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlaps. vi. Providing 300x300mm , 20mm thick pre-cast plain cement concrete tiles jointed & pointed flush in cement mortar 1:6 over 15mm thick bedding layer of cement mortar 1:6 using 5% creosote oil ,complete all as specified and as directed.

S&F for GI pipes medium grade, galvanized, with all fitting and fixed complete to walls and ceiling etc 15mm bore, including taking down or up steel tubing and connections with cleaning for re-fixing or removal to store complete all as specified and directed.

S&F for GI pipes medium grade, galvanized, with all fitting and fixed complete to walls and ceiling etc 20 mm bore, including taking down or up steel tubing and connections with cleaning for re-fixing or removal to store complete all as specified and directed.

M&L for cutting chases in brick wall for concealed water tubing exc 10 cm but not exc 20 cm girth and making good.

S&F bib taps chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore , complete all as specified and directed.

S&F wall mixer with provision of shower for mixing hot and cold water 3 in 1 fancy type brass chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 15mm and fixed in repair complete all as specified and directed.

Supply and fixing in repair for angular stop cock fancy type chromium plated with cast copper alloy screwed down high pressure with or without lathered hot and cold with long screwed shanks and fly nuts 15mm bore, complete all as specified and directed.

Supply and fixing in repair basin mixer 2 in 1 , cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lathered hot or cold with long screwed shanks and fly nuts screwed for iron pipe 15mm bore, complete all as specified and directed.

Supply and fixing in repair for PVC connection 15mm bore size with PTMT nuts of length 45cm, complete all as specified and directed.

S&F in repair PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets. 10 ltr capacity, complete all as specified and directed.

S&F as in repair ball valve high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe or brass ferrule 20mm bore, complete all as specified and directed.

Supply and fixing in repair CP grating 150mm dia with centre hole , complete all as specified and directed.

S&F in repair rotational moulded polythene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting existing tanks setting aside for repairs, cleaning, etc. all as specified in SSR Part I of 1000 ltr capacity, complete all as specified and directed.

S&F in repair for gun-metal, globe or gate valves, for bore dia of pipe 15mm with iron wheel head, screwed both ends for iron pipe and fixed complete ,all as specified and as directed.

Supply and fixing in repair vitreous China squatting pattern Orissa pattern WC size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) but excluding lime concrete bedding ,complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges complete.

M&L for replacement of Vitreous China wash basin, oval type of size 195x590x420mm with plug and stopper including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand or fixing in stone/concrete slab with supply of waste pipe of 32mm dia, waste coupling of PTMT (half or full threaded),pillar tap complete all as specified and as directed .

M&L for replacement of Vitreous China urinal,bowl type, flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern and flush pipe but including of waste pipe), including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe, complete all as specified and as directed by Engineer-In-Charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rein forced with M.S. square tube supplying and fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded etc. with suitable PVC sheet beading including hinges etc complete all as specified.

S&F epoxy powder coated with fixing brackets pelmet rods of mild steel 25 mm with and including pair of fancy type finnals complete fixed as in repair, complete all as specified and directed.

M&L for 5mm thick plastering on fair faces for concrete surfaces finished even and smooth w/o using extra cement in cement mortar 1:3 on ceiling , complete all as specified and directed.

M&L for preparation of new surface of and applying two coat of oil emulsion white or coloured over a coat of primer of chalk whitening or priming of OBD on walls complete all as specified and as directed.

M&L for preparation of old surface of and applying two coat of oil emulsion white or coloured or OBD on walls complete all as specified and as directed.

M&L for preparation of new surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparation of old/ decorated, un-decorated, plastered or unplastered surfaces of walls including complete removal of existing treatment, making surface even and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and fascias and applying two coats of acrylic smooth exterior paint of required shade @ 1.67Kg/10Sqm including exterior primer @ 2.20Kg/10Sqm, complete all as specified and as directed by Engineer-In-Charge.

M&L for preparation of old/ decorated, un-decorated, plastered or unplastered surfaces of walls including complete removal of existing treatment, making surface even and filling weather proof putty in small holes, cavities, cracks and applying one coat of distemper oil emulsion over 1mm thick birla white wall care putty, complete all as specified and as directed by Engineer-In-Charge.

M&L for preparing of new plaster surface of ceiling and applying three coats of white wash complete all as specified and as directed by engineer in charge.

M&L for preparing of new plaster surface of wall and applying two coats of white wash over one coat of primer complete all as specified and as directed by engineer in charge.

M&L for preparation of old/ decorated, un-decorated, plastered or unplastered surfaces of walls including complete removal of existing treatment of wall and applying two coats of white wash , complete all as specified and as directed by Engineer-In-Charge.

S&F cast iron sand cast soil, waste and vent pipes, 100mm bore, in any length with or without ears, with cement joints, laid in trenches or in floors,including dismantling of existing pipe complete all as specified and directed by Engineer-In-Charge.

S&F cast iron sand cast soil, waste and vent pipes, 75mm bore, in any length with or without ears, with cement joints, laid in trenches or in floors, ,including dismantling of existing pipe complete all as specified and directed by Engineer-In-Charge.

S&F in repair cast iron bends, 100mm bore pipe (any radius), with duck's foot or heel rest, complete all as specified and as directed by Engineer-In-Charge.

S&F in repair cast iron bends, 75 mm bore pipe (any radius), with duck's foot or heel rest, complete all as specified and as directed by Engineer-In-Charge.

S&F in repair cast iron branch pieces, 100mm bore pipe, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and as directed by Engineer-In-Charge.

S&F in repair cast iron branch pieces, 75mm bore pipe, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and as directed by Engineer-In-Charge.

S&F in repair cast iron bends, 100mm bore pipe (any radius), diminishing pieces or tapers (larger bore measured), fitted with oval access doors, complete all as specified and as directed by Engineer-In-Charge.

S&F in repair cast iron bends, 75mm bore pipe (any radius), diminishing pieces or tapers (larger bore measured), fitted with oval access doors, complete all as specified and as directed by Engineer-In-Charge.

S&F in repair 100mm dia Cast Iron 'P' or 'S' trap complete all as specified and as directed.

S&F in repair cast iron floor trap, with grating of 100mm outlet dia including jointing to waste pipe fixed in plain cement concrete, 1:2:4, type B-1 (using 20mm graded crushed stone aggregates), complete all as specified and as directed by Engineer-In-Charge.

S&F in repair Salt-glazed stoneware gully traps, size 150x100mm, square or round mouthed, type 'P' including jointing to waste pipe fixed in plain cement concrete, 1:2:4, type B-1 (using 20mm graded crushed stone aggregates), complete all as specified and as directed by Engineer-In-Charge.

M&L for preparation of new surface of wall with 1mm thick Birla putty on plastering surface and applying two coat of oil emulsion white or coloured over a coat of primer of chalkwihiting or priming of OBD on walls complete all as specified and as directed.

M&L for complete removal of existing treatment, and applying 1mm thick Birla putty on plastering surface and applying two coat of oil emulsion white or coloured over a coat of primer of chalk wihiting or priming complete all as specified and as directed.

S&F in repair non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ,including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6, including dismantling of existing tiles complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid over and including 25mm thick well rammed sand cushion laid over and including sub base of 75mm thick of plain cement concrete 1:5:10, type E-2 (using 40mm graded crushed stone aggregate), with grey cement and no pigment, including dismantling of existing tiles complete all as specified and directed.

M&L for plain cement concrete nominal mix 1:2:4 , type B-1 (using 20mm graded crushed stone aggregate), as in kerb stone, coping, including necessary formwork complete all as specified and as directed by Engineer-In-Charge.

M&L for RCC 1:2:4 (Nominal Mix) type B-1 (20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, including demolition of existing cement concrete (reinforced) complete all as specified and directed.

M&L For RCC 1:2:4 (Nominal Mix) type B-1 (20mm graded crushed stone aggregate) as in lintels beams ,cantilevers ,shelves including support overhangs etc including demolition of existing cement concrete (reinforced) complete all as specified and directed.

M&L for formwork for rough finish flat surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping)complete all as specified and as directed by Engineer-In-Charge.

M&L for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide.

M & L for mild steel deformed or twisted ,TMT bars 10 mm dia and above , cut to length, bent to shape required, including cranking, bending spirally for hooping, hooking ends and binding with MS wire (annealed) not less than 0.90 mm dia or securing with clips quality conforming to E-250 (Fe 410W) ,complete all as specified and as directed.

M&L for TMT bars 5mm dia and over upto10mm dia in stirrups cut to length,bent to shape reqd including cranking with and including MS wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.to match with existing surface ,colour ,shade with putty and white cement for smooh finishing of holes ,small patches etc, complete all as specified and as directed .

Taking down fan,ceiling cable end, dismantling blades and removing fan & blades and deposit to MES store complete all as specified and as directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories are in concealed in walls /roofs/floors / ceiling etc. flush mounting MS box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of housing of switch modules for switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following:- (Note:- All necessary accessories such as box,top cover, plate, blank plate,MS box,screws,washers and all electrical fixtures are to be used same make/brand only and box,top cover plate, MS box shall be measured and paid seperately under relevant items)

(a) One light point/fan point/ exhaust fan point/ bell point controlled by one switch.

(b) One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

(c) One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

(d) One light point controlled by one way switch 5 Amps

(e) One 3 pin 6 amps socket point controlled by one 6 amps switch on independent board .

(f) One 3 pin 6 amps socket point controlled by one 6 amps switch on same board .

Description all as per item No.105 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed but for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board complete all as specified and directed by Engr in Charge.

Supply and fixing switch piano, flush type, single pole, one way, 6 Amps, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing switch piano, flush type, single pole, one way, 15 Amps, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing socket outlet, 2/3-pin, 6-Amps, 2 module flush type, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing switch socket combination,2 in 1 ,3-pin, 5/16-Amps, flush type, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing including connection testing of stepped type (multi-steps) electronic regulator for ceiling fan 1200/1400 mm, 240 volts, including connecting, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing ceiling rose, three phase/ PVC/ polycarbonate, isolated body,JUMBO type complete all as specified and as directed.

Supply and fixing lamp holder, PVC Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed .

Supply and fixing in repair LED bulb lamp of 9 Watt,240volts , 50 Hz including removing old unsv item complete all as specified and as directed

Supply and fixing in repair LED Light fitting 1x9W/1x10W bulkhead luminaires incl LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed .

Supply and fixing in repair LED tube light fitting, 20 watt, 4 feet long indoor decorative high lumen batten, including connecting up with twin core twisted flexible copper conductor cable of suitable size, with replacement of 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fitting terminal complete all as specified and directed.

Supply and fixing in replacement of LED secruity light fitting of capacity 45 Watt in aluminium PDC housing, toughened glass cover with IP66 protection with suitable inbuilt surge protector and cable connection from ceiling rose to light fitting and testing complete all as specified and directed. Make:- Havells/Crompton/Philips or equivalent.

Labour only for refixing/Hanging only ceiling fan (M.D. supply) with replacement of 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan ternimal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling in cavities with filler after cleaning all dust etc complete all as specified and directed.

S&F of Ceiling fan, metalic, sweep 1200mm, with BLDC Motor, high speed, inclduing necessary fitting/fixtures such as Hook and clamps etc including connectig wire of suitable size and length from ceiling rose to fan connector, having BEE Star Rating- 5 Star, Rated Power Input in Watt 28±10%, Rated Speed in RPM 345±10%, Rated Air Delivery in CuM/ Min- 210 Minimum, Service Value CMM/W 7.85 Minimum No of Speed 5 , Insulation Class- E, Temperature Rise @ Rated Voltage 25 degree Celcius (Max) by winding resistance measurement at an ambient 30 degree Celcius, High Voltage Test Withstands 1.5KV, Insulation resistance above 2 MΏ, Type of Ball Bearings Single row deep groove ball bearings of 6202 sizes Top & Bottom Cover should be of aluminium, Type of Lubricant Used Lithium Based – Shell Alvania RL3, Material of Blade Aluminium, BEE Certification, Material of Canopies- Polypropylene, complete all as specified and as directed.

Supply and fixing in replacement LED tube light fitting, 10 watt, 2 feet long mirror type with high output diffuser , decorative high lumen batten, including connecting up with 3 core flexible copper conductor cable of suitable size, ceiling rose to fitting ternimal complete all as specified and directed.

Supply and fixing sheet metal enclosures DB's double door factory made power coated out ofr CRCA mild steel sheet 1.2 mm thick with metallic painting white series, 240 volts 200 amps rated enamelled bus bar 8 way dust and vermin proof proof suitable for incorporation of MCBs duly concealed in wall and making good to disturbed surface and colour matching including dismantling of existing DBs complete all as specified.

Supply and fixing sheet metal enclosures DB's double door factory made power coated out ofr CRCA mild steel sheet 1.2 mm thick with metallic painting white series, 240 volts 200 amps rated enamelled bus bar 4 way dust and vermin proof proof suitable for incorporation of MCBs duly concealed in wass and making good to disturbed surface and colour matching including dismantling of existing DBs complete all as specified

Supply and fixing MCB SP 6 to 32 Amps 10 KA,"C" series, AC, 240Volts, 50Hz , ISI marked complete all as specified and directed.

Supply and fixing MCB SPN 6-32 Amps 10 KA,"C" series, AC, 240Volts, 50Hz, ISI marked complete all as specified and directed.

Supply and fixing MCB SPN 40 Amps 10 KA,"C" series, AC, 240Volts, 50Hz, ISI marked complete all as specified and directed.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM, RCC cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old unserviceable earthing items complete all as specified and directed.

Supply and fixing in repair GI bracket pipe of size 40 mm dia medium grade of 1.0 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including suitable fabricate MS flat iron clamps of 25X6 mm thick -02 Nos suitable for fixing any places with nuts,bolts & washers including grouting on wall etc complete all as specified and directed.

Supply,laying,connecting and testing 1100 volts grade, 35 sqmm, 2.0 core, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape including taking down or up old unserviceble UG Cable complete all as specified. (Note : 1. Excavation, earth work, bricks protection and sand cushioning will be measured and paid separately).

Supply,laying,connecting and testing in repair 1100 volts grade, 16 sqmm, 2.0 core, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape including taking down or up old unsv UG Cable complete all as specified. (Note : 1. Excavation, earth work, bricks protection and sand cushioning will be measured and paid separately).

Excavation in trenches, in hard dense soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and all as directed.

M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed.

Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable complete all as specified and directed.

Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick all as specified and directed .

Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified.

Supply and fixing in repair of tubes light grade of 40 mm bore galvanised with all fitting for cable protection trenches/wall/on pole including necesarry clamps sets and nut & bolts complete all as specified and directed by Engineer-In-Charge.

Sub main wiring (concealed conduits in surfaces) for circuits/ submain wiring alongwith earth wire with two run of 6.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi-stranded, FRLS, ISI marked, 1100 Volts grade and one run of 6.0 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 25mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications,including taking down existing wire complete all as specified and as directed by Engineer-In-Charge.

Amount of Schedule of credit of for Rs 1,01,650.00 shall be deducted from quoted amount.

M/s Rajesh Kumar Contractor (BID ID -3281229)

M/s Chopra Constructions (BID ID -3281619)

bushan kumar (BID ID -3285219)