Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 1255 DEE DEVELOPMENTENGINEERS LIMITED SECTOR 14 SECTOR 14 FARIDABAD HARYANA 121007 | FARIDABAD | HARYANA | 121007 | Admitted-Finance |
| 2 | Admitted-Finance 0 NARA MEERUT ROAD MUZAFFARNAGAR UTTAR PRADESH 251001 | MUZAFFARNAGAR | UTTAR PRADESH | 251001 | Admitted-Finance |
| 3 | Rejected-Technical OFFICE 4 LEVEL 7 M AGILE BANER ROAD BANER PUNE PUNE MAHARASHTRA 411045 | PUNE | MAHARASHTRA | 411045 | Rejected-Technical Techno-Commercially Not Acceptable |
Tender Value
Refer Docs
Closing Date
6 Sept 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mr. Amit Borkar
thyssenkrupp Industrial Solutions (India) Private Limited Mumbai
Supply of Pre Fabricated Pipe Spools_GROUP_A and B For NREP For Numaligarh Refinery Limited, Assam,INDIA.
2023_NRL_757052_6
TK-1ZZZA-MP-RFQ-0090
Open Tender
Miscellaneous Goods
Supply
365 days
Numaligarh Refinary Limited Assam
As per Tender
10 documents required · 10 mandatory
₹0
Exempted
24 Nov 2023
30 Aug 2023
7 Sept 2023
30 Aug 2023
6 Sept 2023
30 Aug 2023
30 Aug 2023 - 30 Aug 2023
Amount
Supply of piping materials like, pipe, fittings, flanges , fabrication, NDT, RFID taging, Packing, transportation and delivery of fabricated spools at NREP EPCM1 project site
Scope includes supply of piping materials like, pipe, fittings, flanges ,fabrication , surface preparation and painting, NDT,RFID taging , Packing , transportation and delivery of fabricated spools at NREP EPCM1 project site at NRL refinery. Fabrication of Piping Spools including cutting, edge preparation,( including grinding the edges of pipe, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required); fitup, bending, preheating/ post heating wherever required, welding (including stress relieving), threading, tappings for pressure gauges, thermowells, sample connections , piping specials such as mitres and fabricated fittings, vents, drains, reinforcement pads etc .scope also includes Supports welding which needs to be welded with parent spool .Cleaning & flushing by water/compressed air - Surface - preparartion, application of primer, intermdiate and final coat marking as per painting specification
Scope also includes all type of testing as specified in the specification for Non- Destructive Examination of Piping including pressure test including test medium as per specifications / codes , draining of water , drying by compressed air. Quoted rates shall includes all expenses towards this . Engaging approved Third Party Inspection agency (TPIA) for stage wise inspection for procurement and fabrication, inspection release notes all inclusive as per approved QAP/ITP. Performing Positive Material Identification(PMI) using alloy analysers.- Stage wise inspection for procurement and fabrication, inspection release notes all inclusive as per approved QAP / ITP. Bidder shall make all neccessary arrangment for hydrotesting including all temporary material like nut bolts , gaskets etc . Pickling of SS joints . SS pipeline shall be tested by water having Chloride content less than 25 PPM. Scope is Including all consumables, labour, machineries, supervision, preparation & submission of necessary spool mark up plan , quality document , final documentation etc. needed to complete work as per specifications and drawings. Quoted rate shall includes water and power arrangement . Bidder quoted rate shall includes all charges towards handing over of material to store /contractor and obtaining documentation for delivery of piping spools. Supports welded directly to pipe only from parent pipe is included in vendor scope . vendor shall follow minimum basic criteria for spool fabrication . Minimum 70 % of Joints of any isometric shall be welded in shop . Straight length pipe shall not be considered in spool - For detailed scope of work ref. Annexure scope of work and supply . Manpower deployment : Providing skilled personnel till the contract period at NRL site for spool management ,Monitoring, Coordination as per SOW document Note: Quantity of the supplied materials shall be considered for the payment only after due certification by TPIA and submission of the documents to NRL / EPCM1 to that effect.
Supply of piping prefabricated spools of various sizes, MOCs ( Pipe , fittings , flanges , weldedable supports etc, as per Scope defined elsewhere in the tender document) , Fabrication , NDT , Testing,Painting,Transportation and Delivery of the same to site. Note: Up to 10mm tickness <= 10MM Between 10 mm to 20mm thickness > 10MM AND <= 20MM Above 20mm thickness > 20MM
Category Of Material Group : Carbon Steel
CARBON STEEL NON IBR ( Up to 10mm tickness)
CARBON STEEL NON IBR ( Between 10 mm to 20mm thickness)
CARBON STEEL - H2 SERVICE ( Up to 10mm tickness)
CARBON STEEL - H2 SERVICE ( Between 10 mm to 20mm thickness)
CARBON STEEL - NACE ( Up to 10mm tickness)
CARBON STEEL - NACE ( Between 10 mm to 20mm thickness)
CARBON STEEL - ( NACE + H2 ) ( Up to 10mm tickness)
CARBON STEEL - (NACE+H2) ( Between 10 mm to 20mm thickness)
CARBON STEEL - (NACE+H2) ( above 20mm thickness)
CARBON STEEL - IBR ( Up to 10mm tickness)
CARBON STEEL - NACE + Amine ( Up to 10mm tickness)
CARBON STEEL - Galvanized ( Up to 10mm tickness)
CARBON STEEL - Int. Coated / external coated ( Up to 10mm tickness)
CARBON STEEL - Int. Coated / external coated ( Between 10 mm to 20mm thickness)
Category Of Material Group -LTCS
LTCS ( Up to 10mm tickness)
LTCS ( Between 10 mm to 20mm thickness)
LTCS (AMINE+CAUSTIC) ( Up to 10mm tickness)
LTCS (AMINE+CAUSTIC) ( Between 10 mm to 20mm thickness)
Category Of Material Group -ALLOY STEEL
ALLOY STEEL ( P11) - H2 ( Up to 10mm tickness)
ALLOY STEEL ( P11) - H2 ( Between 10 mm to 20mm thickness)
Category Of Material Group : STAINLESS STEEL (SS304 ,SS304L and SS316, SS316L, SS321) - NACE ,H2, NACE+H2
STAINLESS STEEL - SS 304 / 304L ( Up to 10mm tickness)
STAINLESS STEEL - SS 321 ( Up to 10mm tickness)
STAINLESS STEEL - SS 321 ( Between 10 mm to 20mm thickness)
STAINLESS STEEL - SS 321 (H2 SER.) ( Up to 10mm tickness)
STAINLESS STEEL - SS 321 (H2 SER.) ( Between 10 mm to 20mm thickness)
Description of Work / Item(s)
Amount
Supply of piping materials like, pipe, fittings, flanges , fabrication, NDT, RFID taging, Packing, transportation and delivery of fabricated spools Group A at NREP EPCM1 project site
Supply of piping materials like, pipe, fittings, flanges , fabrication, NDT, RFID taging, Packing, transportation and delivery of fabricated spools Group B at NREP EPCM1 project site
Description of Work / Item(s)
Amount
Supply of piping materials like, pipe, fittings, flanges , fabrication, NDT, RFID taging, Packing, transportation and delivery of fabricated spools at NREP EPCM1 project site
Scope includes supply of piping materials like, pipe, fittings, flanges ,welded valves ,fabrication , NDT,RFID taging , Packing , transportation and delivery of fabricated spools at NREP EPCM1 project site at NRL refinery. Fabrication of Piping Spools including cutting, edge preparation,( including grinding the edges of pipe, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required); fitup, bending, preheating/ post heating wherever required, welding (including stress relieving), threading, tappings for pressure gauges, thermowells, sample connections , piping specials such as mitres and fabricated fittings, vents, drains, reinforcement pads etc .scope also includes Supports welding which needs to be welded with parent spool .Cleaning & flushing by water/compressed air - Surface - preparartion, application of primer, intermdiate and final coat marking as per painting specification
Scope also includes all type of testing as specified in the specification for Non- Destructive Examination of Piping including pressure test including test medium as per specifications / codes , draining of water , drying by compressed air. Quoted rates shall includes all expenses towards this . Engaging approved Third Party Inspection agency (TPIA) for stage wise inspection for procurement and fabrication, inspection release notes all inclusive as per approved QAP/ITP. Performing Positive Material Identification(PMI) using alloy analysers.- Stage wise inspection for procurement and fabrication, inspection release notes all inclusive as per approved QAP / ITP. Bidder shall make all neccessary arrangment for hydrotesting including all temporary material like nut bolts , gaskets etc . Pickling of SS joints . SS pipeline shall be tested by water having Chloride content less 25 PPM .Scope is Including all consumables, labour, machineries, supervision, preparation & submission of necessary spool mark up plan , quality document , final documentation etc. needed to complete work as per specifications and drawings. Quoted rate shall includes water and power arrangement . Bidder quoted rate shall includes all charges towards handing over of material to store /contractor and obtaining documentation for delivery of piping spools. Supports welded directly to pipe only from parent pipe is included in vendor scope . vendor shall follow minimum basic criteria for spool fabrication . Minimum 70 % of Joints of any isometric shall be welded in shop . Straight length pipe shall not be considered in spool - For detailed scope of work ref. Annexure scope of work and supply . Manpower deployment : Providing skilled personnel till the contract period at NRL site for spool management ,Monitoring, Coordination as per SOW document Note: Quantity of the fabricated spools shall be considered for the payment only after due certification by TPIA as release for painting and having carried out all NDT and Hydro testing of the spools and submission of the documents to NRL / EPCM1 to that effect.
Supply of piping prefabricated spools of various sizes, MOCs ( Pipe , fittings , flanges , weldedable supports etc, as per Scope defined elsewhere in the tender document) , Fabrication , NDT , Testing,Painting,Transportation and Delivery of the same to site. Note: Up to 10mm tickness <= 10MM Between 10 mm to 20mm thickness > 10MM AND <= 20MM Above 20mm thickness > 20MM
Category Of Material Group : Carbon Steel
CARBON STEEL NON IBR ( Up to 10mm tickness)
CARBON STEEL NON IBR ( Between 10 mm to 20mm thickness)
CARBON STEEL - H2 SERVICE ( Up to 10mm tickness)
CARBON STEEL - H2 SERVICE ( Between 10 mm to 20mm thickness)
CARBON STEEL - NACE ( Up to 10mm tickness)
CARBON STEEL - NACE ( Between 10 mm to 20mm thickness)
CARBON STEEL - (NACE + H2) ( Up to 10mm tickness)
CARBON STEEL - (NACE+H2) ( Between 10 mm to 20mm thickness)
CARBON STEEL - (NACE+H2) ( above 20mm thickness)
CARBON STEEL - IBR ( Up to 10mm tickness)
CARBON STEEL - NACE + Amine ( Up to 10mm tickness)
CARBON STEEL - Galvanized ( Up to 10mm tickness)
CARBON STEEL - Int. Coated ( Up to 10mm tickness)
CARBON STEEL - Int. Coated ( Between 10 mm to 20mm thickness)
Category Of Material Group -LTCS
LTCS ( Up to 10mm tickness)
LTCS ( Between 10 mm to 20mm thickness)
LTCS (AMINE+CAUSTIC) ( Up to 10mm tickness)
LTCS (AMINE+CAUSTIC) ( Between 10 mm to 20mm thickness)
Category Of Material Group -ALLOY STEEL
ALLOY STEEL ( P11) - H2 ( Up to 10mm tickness)
ALLOY STEEL ( P11) - H2 ( Between 10 mm to 20mm thickness)
Category Of Material Group : STAINLESS STEEL (SS304 ,SS304L and SS316, SS316L, SS321) - NACE ,H2, NACE+H2
STAINLESS STEEL - SS 304 / 304L ( Up to 10mm tickness)
STAINLESS STEEL - SS 321 ( Up to 10mm tickness)
STAINLESS STEEL - SS 321 ( Between 10 mm to 20mm thickness)
STAINLESS STEEL - SS 321 (H2 SER.) ( Up to 10mm tickness)
STAINLESS STEEL - SS 321 (H2 SER.) ( Between 10 mm to 20mm thickness)
Modification Works- already completed spool as defined in scope of work - including necessary consumables, manpower, tools, machinaries, retesting etc. complete in all respect. This item will be operated as per instruction of tkIS Inspection incharge only. Ref. Detailed procedure attached for modiication work In measurement of works
Cutting and Grinding of welded joints
For all material grades Under Material Group : Carbon Steel (For all class and all service all thickness)
For all material grades Under Material Group : Alloy Steel (For all class and all service all thickness)
For all material grades Under Material Group : Stain less steel (For all class and all service all thickness)
For all material grades Under Material Group : LTCS (For all class and all service all thickness)
Edge preparation, Fit up and Welding
For all material grades Under Material Group : Carbon Steel (For all class and all service all thickness)
For all material grades Under Material Group : Alloy Steel(For all class and all service all thickness)
For all material grades Under Material Group : Stainless steel(For all class and all service all thickness)
For all material grades Under Material Group : LTCS (For all class and all service all thickness)
Manpower deployment : Vendor will deploy adequate number of manpower / representatives along with requisite computers / PPE etc. as per the instructions of EIC for Monitoring and Coordination of site activities. Scope of work includes but not limited to below listed activities. The deployment schedule will be finalised jointly after award of work with EIC • Coordination with EPCM1 warehouse in charge. • Coordination with EPCM1 site team. • Coordination with Spool Vendor shop team for sequence of material required at site and get the material in sequence with respect to erection sequence. • Coordination with site Mechanical contractor for erection activity at site. • Making entry of spools received at site as per line wise history sheet and inform vendor shop for any shortage or damage or wrongly fabricated till last lot of delivery received at site.
Manpower Supply for Coordination with tkIS warehouse for receipt of material, entry of material inside refinery , Coordination with tkIS site team and Coordination with Prefabricated Spool Vendor shop team for sequence of material required at site and get the material in sequence with respect to erection sequence.
Description of Work / Item(s)
Amount
Painting of Insulated & Uninsulated piping- Surface preparartion, application of primer, intermdiate and final coat , marking as per painting specification TP-1ZZZA-PI-SPE-0003 Note : Quantity of the Painted spools shall be considered for the payment only after due certification by TPIA as completion of painting, release for dispatch and delivery of the painted spools at site and submission of the documents to NRL / EPCM1 to that effect.
Note:- Quantity mentioned in SQM is for the execution of the complete painting system including all the coats as specified in the technical specification
Painting System CG1
Painting System CS2
Painting System CS3
Painting System CS5
Painting System CS6
Painting System SS1
Painting System SS2
Description of Work / Item(s)
Amount
Supply of piping materials like, pipe, fittings, flanges , fabrication, NDT, RFID taging, Packing, transportation and delivery of fabricated spools at NREP EPCM1 project site
Scope includes supply of piping materials like, pipe, fittings, flanges ,welded valves ,fabrication , NDT,RFID taging , Packing , transportation and delivery of fabricated spools at NREP EPCM1 project site at NRL refinery. Fabrication of Piping Spools including cutting, edge preparation,( including grinding the edges of pipe, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required); fitup, bending, preheating/ post heating wherever required, welding (including stress relieving), threading, tappings for pressure gauges, thermowells, sample connections , piping specials such as mitres and fabricated fittings, vents, drains, reinforcement pads etc .scope also includes Supports welding which needs to be welded with parent spool .Cleaning & flushing by water/compressed air - Surface - preparartion, application of primer, intermdiate and final coat marking as per painting specification
Scope also includes all type of testing as specified in the specification for Non- Destructive Examination of Piping including pressure test including test medium as per specifications / codes , draining of water , drying by compressed air. Quoted rates shall includes all expenses towards this . Engaging approved Third Party Inspection agency (TPIA) for stage wise inspection for procurement and fabrication, inspection release notes all inclusive as per approved QAP/ITP. Performing Positive Material Identification(PMI) using alloy analysers.- Stage wise inspection for procurement and fabrication, inspection release notes all inclusive as per approved QAP / ITP. Bidder shall make all neccessary arrangment for hydrotesting including all temporary material like nut bolts , gaskets etc . Pickling of SS joints . SS pipeline shall be tested by water having Chloride content less than 25 PPM .Scope is Including all consumables, labour, machineries, supervision, preparation & submission of necessary spool mark up plan , quality document , final documentation etc. needed to complete work as per specifications and drawings. Quoted rate shall includes water and power arrangement . Bidder quoted rate shall includes all charges towards handing over of material to store /contractor and obtaining documentation for delivery of piping spools. Supports welded directly to pipe only from parent pipe is included in vendor scope . vendor shall follow minimum basic criteria for spool fabrication . Minimum 70 % of Joints of any isometric shall be welded in shop . Straight length pipe shall not be considered in spool - For detailed scope of work ref. Annexure scope of work and supply . Manpower deployment : Providing skilled personnel till the contract period at NRL site for spool management ,Monitoring, Coordination as per SOW document Note: Quantity of the supplied materials shall be considered for the payment only after due certification by TPIA and submission of the documents to NRL / EPCM1 to that effect.
Supply of piping prefabricated spools of various sizes, MOCs ( Pipe , fittings , flanges , weldedable supports etc, as per Scope defined elsewhere in the tender document) , Fabrication , NDT , Testing,Painting,Transportation and Delivery of the same to site. Note: Up to 10mm tickness <= 10MM Between 10 mm to 20mm thickness > 10MM AND <= 20MM Above 20mm thickness > 20MM
Category Of Material Group : Carbon Steel
CARBON STEEL NON IBR ( Up to 10mm tickness)
CARBON STEEL NON IBR ( Between 10 mm to 20mm thickness)
CARBON STEEL - H2 SERVICE ( Up to 10mm tickness)
CARBON STEEL - NACE ( Up to 10mm tickness)
CARBON STEEL - NACE ( Between 10 mm to 20mm thickness)
CARBON STEEL - NACE + H2 ( Up to 10mm tickness)
CARBON STEEL - NACE + H2 ( Between 10 mm to 20mm thickness)
CARBON STEEL - Galvanized ( Up to 10mm tickness)
CARBON STEEL - Int. Coated ( Up to 10mm tickness)
Category Of Material Group -ALLOY STEEL
ALLOY STEEL ( P11) - H2 ( Up to 10mm tickness)
ALLOY STEEL ( P11) - H2 ( Between 10 mm to 20mm thickness)
Category Of Material Group : STAINLESS STEEL (SS304 ,SS304L and SS316, SS316L, SS321) - NACE ,H2, NACE+H2
STAINLESS STEEL - SS 321 H2 service ( Up to 10mm tickness)
Description of Work / Item(s)
Amount
Supply of piping materials like, pipe, fittings, flanges , fabrication, NDT, RFID taging, Packing, transportation and delivery of fabricated spools at NREP EPCM1 project site
Scope includes supply of piping materials like, pipe, fittings, flanges ,welded valves ,fabrication , NDT,RFID taging , Packing , transportation and delivery of fabricated spools at NREP EPCM1 project site at NRL refinery. Fabrication of Piping Spools including cutting, edge preparation,( including grinding the edges of pipe, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required); fitup, bending, preheating/ post heating wherever required, welding (including stress relieving), threading, tappings for pressure gauges, thermowells, sample connections , piping specials such as mitres and fabricated fittings, vents, drains, reinforcement pads etc .scope also includes Supports welding which needs to be welded with parent spool .Cleaning & flushing by water/compressed air - Surface - preparartion, application of primer, intermdiate and final coat marking as per painting specification
Scope also includes all type of testing as specified in the specification for Non- Destructive Examination of Piping including pressure test including test medium as per specifications / codes , draining of water , drying by compressed air. Quoted rates shall includes all expenses towards this . Engaging approved Third Party Inspection agency (TPIA) for stage wise inspection for procurement and fabrication, inspection release notes all inclusive as per approved QAP/ITP. Performing Positive Material Identification(PMI) using alloy analysers.- Stage wise inspection for procurement and fabrication, inspection release notes all inclusive as per approved QAP / ITP. Bidder shall make all neccessary arrangment for hydrotesting including all temporary material like nut bolts , gaskets etc . Pickling of SS joints . SS pipeline shall be tested by water having Chloride content less than 25 PPM .Scope is Including all consumables, labour, machineries, supervision, preparation & submission of necessary spool mark up plan , quality document , final documentation etc. needed to complete work as per specifications and drawings. Quoted rate shall includes water and power arrangement . Bidder quoted rate shall includes all charges towards handing over of material to store /contractor and obtaining documentation for delivery of piping spools. Supports welded directly to pipe only from parent pipe is included in vendor scope . vendor shall follow minimum basic criteria for spool fabrication . Minimum 70 % of Joints of any isometric shall be welded in shop . Straight length pipe shall not be considered in spool - For detailed scope of work ref. Annexure scope of work and supply . Manpower deployment : Providing skilled personnel till the contract period at NRL site for spool management ,Monitoring, Coordination as per SOW document. Note: Quantity of the fabricated spools shall be considered for the payment only after due certification by TPIA as release for painting and having carried out all NDT and Hydro testing of the spools and submission of the documents to NRL / EPCM1 to that effect.
Supply of piping prefabricated spools of various sizes, MOCs ( Pipe , fittings , flanges , weldedable supports etc, as per Scope defined elsewhere in the tender document) , Fabrication , NDT , Testing,Painting,Transportation and Delivery of the same to site. Note: Up to 10mm tickness <= 10MM Between 10 mm to 20mm thickness > 10MM AND <= 20MM Above 20mm thickness > 20MM
Category Of Material Group : Carbon Steel
CARBON STEEL NON IBR ( Up to 10mm tickness)
CARBON STEEL NON IBR ( Between 10 mm to 20mm thickness)
CARBON STEEL - H2 SERVICE ( Up to 10mm tickness)
CARBON STEEL - NACE ( Up to 10mm tickness)
CARBON STEEL - NACE ( Between 10 mm to 20mm thickness)
CARBON STEEL - NACE + H2 ( Up to 10mm tickness)
CARBON STEEL - NACE + H2 ( Between 10 mm to 20mm thickness)
CARBON STEEL - Galvanized ( Up to 10mm tickness)
CARBON STEEL - Int. Coated ( Up to 10mm tickness)
Category Of Material Group -Alloy Steel
ALLOY STEEL ( P11) - H2 ( Up to 10mm tickness)
ALLOY STEEL ( P11) - H2 ( Between 10 mm to 20mm thickness)
Category Of Material Group : STAINLESS STEEL (SS304 ,SS304L and SS316, SS316L, SS321) - NACE ,H2, NACE+H2
STAINLESS STEEL - SS 321 H2 service ( Up to 10mm tickness)
Modification Works- already completed spool as defined in scope of work - including necessary consumables, manpower, tools, machinaries, retesting etc. complete in all respect. This item will be operated as per instruction of tkIS Inspection incharge only. Ref. Detailed procedure attached for modiication work In measurement of works
Cutting and Grinding of welded joints
For all material grades Under Material Group : Carbon Steel (For all class and all service all thickness)
For all material grades Under Material Group : Alloy Steel (For all class and all service all thickness)
For all material grades Under Material Group : Stainless steel (For all class and all service all thickness)
For all material grades Under Material Group : LTCS (For all class and all service all thickness)
Edge preparation, Fit up and Welding
For all material grades Under Material Group : Carbon Steel (For all class and all service all thickness)
For all material grades Under Material Group : Alloy Steel (For all class and all service all thickness)
For all material grades Under Material Group : Stain less steel (For all class and all service all thickness)
For all material grades Under Material Group : LTCS (For all class and all service all thickness)
Description of Work / Item(s)
Amount
Painting of Insulated & Uninsulated piping- Surface preparartion, application of primer, intermdiate and final coat , marking as per painting specification TP-1ZZZA-PI-SPE-0003 Note : Quantity of the Painted spools shall be considered for the payment only after due certification by TPIA as completion of painting, release for dispatch and delivery of the painted spools at site and submission of the documents to NRL / EPCM1 to that effect.
Note:- Quantity mentioned in SQM is for the execution of the complete painting system including all the coats as specified in the technical specification
Painting System CS2
Painting System CS3
Painting System CS5
Painting System CS6
Painting System SS1
Painting System SS2
Description of Work / Item(s)
Amount
Supply of piping materials like, pipe, fittings, flanges , fabrication, NDT, RFID taging, Packing, transportation and delivery of fabricated spools at NREP EPCM1 project site
Scope includes supply of piping materials like, pipe, fittings, flanges ,welded valves ,fabrication , NDT,RFID taging , Packing , transportation and delivery of fabricated spools at NREP EPCM1 project site at NRL refinery. Fabrication of Piping Spools including cutting, edge preparation,( including grinding the edges of pipe, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required); fitup, bending, preheating/ post heating wherever required, welding (including stress relieving), threading, tappings for pressure gauges, thermowells, sample connections , piping specials such as mitres and fabricated fittings, vents, drains, reinforcement pads etc .scope also includes Supports welding which needs to be welded with parent spool .Cleaning & flushing by water/compressed air - Surface - preparartion, application of primer, intermdiate and final coat marking as per painting specification
Scope also includes all type of testing as specified in the specification for Non- Destructive Examination of Piping including pressure test including test medium as per specifications / codes , draining of water , drying by compressed air. Quoted rates shall includes all expenses towards this . Engaging approved Third Party Inspection agency (TPIA) for stage wise inspection for procurement and fabrication, inspection release notes all inclusive as per approved QAP/ITP. Performing Positive Material Identification(PMI) using alloy analysers.- Stage wise inspection for procurement and fabrication, inspection release notes all inclusive as per approved QAP / ITP. Bidder shall make all neccessary arrangment for hydrotesting including all temporary material like nut bolts , gaskets etc . Pickling of SS joints . SS pipeline shall be tested by water having Chloride content less than 25 PPM .Scope is Including all consumables, labour, machineries, supervision, preparation & submission of necessary spool mark up plan , quality document , final documentation etc. needed to complete work as per specifications and drawings. Quoted rate shall includes water and power arrangement . Bidder quoted rate shall includes all charges towards handing over of material to store /contractor and obtaining documentation for delivery of piping spools. Supports welded directly to pipe only from parent pipe is included in vendor scope . vendor shall follow minimum basic criteria for spool fabrication . Minimum 70 % of Joints of any isometric shall be welded in shop . Straight length pipe shall not be considered in spool - For detailed scope of work ref. Annexure scope of work and supply . Manpower deployment : Providing skilled personnel till the contract period at NRL site for spool management ,Monitoring, Coordination as per SOW document Note: Quantity of the supplied materials shall be considered for the payment only after due certification by TPIA and submission of the documents to NRL / EPCM1 to that effect.
Supply of piping prefabricated spools of various sizes, MOCs ( Pipe , fittings , flanges , weldedable supports etc, as per Scope defined elsewhere in the tender document) , Fabrication , NDT , Testing,Painting,Transportation and Delivery of the same to site. Note: Up to 10mm tickness <= 10MM Between 10 mm to 20mm thickness > 10MM AND <= 20MM Above 20mm thickness > 20MM
Category Of Material Group : Carbon Steel
CARBON STEEL NON IBR ( Up to 10mm tickness)
CARBON STEEL NON IBR ( Between 10 mm to 20mm thickness)
CARBON STEEL - H2 SERVICE ( Up to 10mm tickness)
CARBON STEEL - H2 SERVICE ( Between 10 mm to 20mm thickness)
CARBON STEEL - NACE ( Up to 10mm tickness)
CARBON STEEL - NACE ( Between 10 mm to 20mm thickness)
CARBON STEEL - IBR ( Up to 10mm tickness)
CARBON STEEL - IBR ( Between 10 mm to 20mm thickness)
CARBON STEEL - NACE + Amine ( Up to 10mm tickness)
CARBON STEEL - NACE + Amine ( Between 10 mm to 20mm thickness)
CARBON STEEL - Galvanized ( Up to 10mm tickness)
CARBON STEEL - Int. Coated ( Up to 10mm tickness)
CARBON STEEL - Int. Coated ( Between 10 mm to 20mm thickness)
Category Of Material Group -LTCS
LTCS ( Up to 10mm tickness)
LTCS ( Between 10 mm to 20mm thickness)
Category Of Material Group -ALLOY STEEL
ALLOY STEEL ( P11) ( IBR) - ( Up to 10mm tickness)
ALLOY STEEL ( P11)( IBR) -( Between 10 mm to 20mm thickness)
ALLOY STEEL ( P5) - H2 ( Up to 10mm tickness)
ALLOY STEEL ( P5) - H2 ( Between 10 mm to 20mm thickness)
ALLOY STEEL ( P5) - H2 ( Above 20mm tickness)
ALLOY STEEL ( P9) - H2 ( Up to 10mm tickness)
ALLOY STEEL ( P9) - H2 ( Between 10 mm to 20mm thickness)
Category Of Material Group : STAINLESS STEEL (SS304 ,SS304L and SS316, SS316L, SS321) - NACE ,H2, NACE+H2
STAINLESS STEEL - SS 304 / 304L DUAL NACE ( Up to 10mm tickness)
Description of Work / Item(s)
Amount
Supply of piping materials like, pipe, fittings, flanges , fabrication, NDT, RFID taging, Packing, transportation and delivery of fabricated spools at NREP EPCM1 project site
Scope includes supply of piping materials like, pipe, fittings, flanges ,welded valves ,fabrication , NDT,RFID taging , Packing , transportation and delivery of fabricated spools at NREP EPCM1 project site at NRL refinery. Fabrication of Piping Spools including cutting, edge preparation,( including grinding the edges of pipe, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required); fitup, bending, preheating/ post heating wherever required, welding (including stress relieving), threading, tappings for pressure gauges, thermowells, sample connections , piping specials such as mitres and fabricated fittings, vents, drains, reinforcement pads etc .scope also includes Supports welding which needs to be welded with parent spool .Cleaning & flushing by water/compressed air - Surface - preparartion, application of primer, intermdiate and final coat marking as per painting specification
Scope also includes all type of testing as specified in the specification for Non- Destructive Examination of Piping including pressure test including test medium as per specifications / codes , draining of water , drying by compressed air. Quoted rates shall includes all expenses towards this . Engaging approved Third Party Inspection agency (TPIA) for stage wise inspection for procurement and fabrication, inspection release notes all inclusive as per approved QAP/ITP. Performing Positive Material Identification(PMI) using alloy analysers.- Stage wise inspection for procurement and fabrication, inspection release notes all inclusive as per approved QAP / ITP. Bidder shall make all neccessary arrangment for hydrotesting including all temporary material like nut bolts , gaskets etc . Pickling of SS joints . SS pipeline shall be tested by water having Chloride content less than 25 PPM .Scope is Including all consumables, labour, machineries, supervision, preparation & submission of necessary spool mark up plan , quality document , final documentation etc. needed to complete work as per specifications and drawings. Quoted rate shall includes water and power arrangement . Bidder quoted rate shall includes all charges towards handing over of material to store /contractor and obtaining documentation for delivery of piping spools. Supports welded directly to pipe only from parent pipe is included in vendor scope . vendor shall follow minimum basic criteria for spool fabrication . Minimum 70 % of Joints of any isometric shall be welded in shop . Straight length pipe shall not be considered in spool - For detailed scope of work ref. Annexure scope of work and supply . Manpower deployment : Providing skilled personnel till the contract period at NRL site for spool management ,Monitoring, Coordination as per SOW document Note: Quantity of the supplied materials shall be considered for the payment only after due certification by TPIA and submission of the documents to NRL / EPCM1 to that effect.
Supply of piping prefabricated spools of various sizes, MOCs ( Pipe , fittings , flanges , weldedable supports etc, as per Scope defined elsewhere in the tender document) , Fabrication , NDT , Testing,Painting,Transportation and Delivery of the same to site. Note: Up to 10mm tickness <= 10MM Between 10 mm to 20mm thickness > 10MM AND <= 20MM Above 20mm thickness > 20MM
Category Of Material Group : Carbon Steel
CARBON STEEL NON IBR ( Up to 10mm tickness)
CARBON STEEL NON IBR ( Between 10 mm to 20mm thickness)
CARBON STEEL - H2 SERVICE ( Up to 10mm tickness)
CARBON STEEL - H2 SERVICE ( Between 10 mm to 20mm thickness)
CARBON STEEL - NACE ( Up to 10mm tickness)
CARBON STEEL - NACE ( Between 10 mm to 20mm thickness)
CARBON STEEL - IBR ( Up to 10mm tickness)
CARBON STEEL - IBR ( Between 10 mm to 20mm thickness)
CARBON STEEL - NACE + Amine ( Up to 10mm tickness)
CARBON STEEL - NACE + Amine ( Between 10 mm to 20mm thickness)
CARBON STEEL - Galvanized ( Up to 10mm tickness)
CARBON STEEL - Int. Coated ( Up to 10mm tickness)
CARBON STEEL - Int. Coated ( Between 10 mm to 20mm thickness)
Category Of Material Group -LTCS
LTCS ( Up to 10mm tickness)
LTCS ( Between 10 mm to 20mm thickness)
Category Of Material Group -ALLOY STEEL
ALLOY STEEL ( P11) ( IBR)- ( Up to 10mm tickness)
ALLOY STEEL ( P11) ( IBR) -( Between 10 mm to 20mm thickness)
ALLOY STEEL ( P5) - H2 ( Up to 10mm tickness)
ALLOY STEEL ( P5) - H2 ( Between 10 mm to 20mm thickness)
ALLOY STEEL ( P5) - H2 ( Above 20mm tickness)
ALLOY STEEL ( P9) - H2 ( Up to 10mm tickness)
ALLOY STEEL ( P9) - H2 ( Between 10 mm to 20mm thickness)
Category Of Material Group : STAINLESS STEEL (SS304 ,SS304L and SS316, SS316L, SS321) - NACE ,H2, NACE+H2
STAINLESS STEEL - SS 304 / 304L DUAL NACE ( Up to 10mm tickness)
Modification Works- already completed spool as defined in scope of work - including necessary consumables, manpower, tools, machinaries, retesting etc. complete in all respect. This item will be operated as per instruction of tkIS Inspection incharge only. Ref. Detailed procedure attached for modiication work In measurement of works
Cutting and Grinding of welded joints
For all material grades Under Material Group : Carbon Steel (For all class and all service all thickness)
For all material grades Under Material Group : Alloy Steel (For all class and all service all thickness)
For all material grades Under Material Group : Stain less steel (For all class and all service all thickness)
For all material grades Under Material Group : LTCS (For all class and all service all thickness)
Edge preparation, Fit up and Welding
For all material grades Under Material Group : Carbon Steel (For all class and all service all thickness)
For all material grades Under Material Group : Alloy Steel (For all class and all service all thickness)
For all material grades Under Material Group : Stain less steel (For all class and all service all thickness)
For all material grades Under Material Group : LTCS (For all class and all service all thickness)
Manpower deployment : Vendor will deploy adequate number of manpower / representatives along with requisite computers / PPE etc. as per the instructions of EIC for Monitoring and Coordination of site activities. Scope of work includes but not limited to below listed activities. The deployment schedule will be finalised jointly after award of work with EIC • Coordination with EPCM1 warehouse in charge. • Coordination with EPCM1 site team. • Coordination with Spool Vendor shop team for sequence of material required at site and get the material in sequence with respect to erection sequence. • Coordination with site Mechanical contractor for erection activity at site. • Making entry of spools received at site as per line wise history sheet and inform vendor shop for any shortage or damage or wrongly fabricated till last lot of delivery received at site.
Manpower Supply for Coordination with tkIS warehouse for receipt of material, entry of material inside refinery , Coordination with tkIS site team and Coordination with Prefabricated Spool Vendor shop team for sequence of material required at site and get the material in sequence with respect to erection sequence.
Description of Work / Item(s)
Amount
Painting of Insulated & Uninsulated piping- Surface preparartion, application of primer, intermdiate and final coat , marking as per painting specification TP-1ZZZA-PI-SPE-0003 Note : Quantity of the Painted spools shall be considered for the payment only after due certification by TPIA as completion of painting, release for dispatch and delivery of the painted spools at site and submission of the documents to NRL / EPCM1 to that effect.
Note:- Quantity mentioned in SQM is for the execution of the complete painting system including all the coats as specified in the technical specification
Painting System CS2
Painting System CS3
Painting System CS5
Painting System CS6
DEE Development Engineers Limited
Isgec Heavy Engineering Limited
DEE Development Engineers Limited
Isgec Heavy Engineering Limited
Isgec Heavy Engineering Limited
DEE Development Engineers Limited
Isgec Heavy Engineering Limited
Isgec Heavy Engineering Limited
DEE Development Engineers Limited
Isgec Heavy Engineering Limited
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .