REPAIRS TO JOINERY, ROLLING SHUTTER AND CONNECTED WORKS IN ZONE-I AREA AT INS CHILKA UNDER GE CHILKA

Amount

Taking down shutters of any description not exceeding 1 Sq. M each complete all as specified and as directed

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each complete all as specified and as directed

Taking down Chowkats or frames with shutters not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and as directed

Taking down Chowkats or frames with shutters exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and as directed.

Taking down Chowkats or frames exceeding 1.5 Sq. M and not exceeding 4 Sq. M each complete all as specified nd as directed

Taking down Chowkats or frames not exceeding 1.5 Sq. M each complete all as specified and as directed

Taking down, easing, adjusting and refixing in the same opening shutters of any description not exceeding 1 Sq. M each and refixing builders hardware as required including renewal of unserviceable screws etc. complete.

Taking down, easing, adjusting and refixing in the same opening shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each and refixing builders hardware as required including renewal of unserviceable screws etc. complete.

S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood panels, and both faces covered with decorative veneer withlipping/frame to match complete all as specified and as directed

S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified.

S&F 2nd class hard wood, 30 mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered mitered and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., supplied & fitted to Chowkats all as specified.

S & F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced withMS squaretube,

S&F solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side Prelam PVC sheet used PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification

S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. The sizes of members of shutters shall be as specified infor providing in windows, ventilators atc.

S & F in repairs Aluminium extreded section body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width including taking down the existing fitting.

S & F in repairs 65 mm long, 4 Levers, Mild Steel Mortice Lock, vertical Type complete all as specified and as directed

S & F 300 mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete.

S & F in repair 300 mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete.

M & L for 18 mm thick plywood, grade BWR type BB fixed with screws to timber frame work as in cupboad and cupboad shelve ,shutter complete all as specified and as directed.

M & L for 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive asper manufacturer's instructions complete all as specified and as directed.

S&F 18/19 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws in timber frame as in cup board, cup bd shelves complete all as specified and as directed.

S & F Hasp and Staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws 100 mm size

S&F butt hinges,medium weight cold rolled mild steel of 100 mm.

S&F butt hinges,medium weight cold rolled mild steel of 75 mm.

S&F Aluminium handles, cast type, anodised of size 150 mm

S&F in repairs Aluminium handles, cast type, anodised of size 125 mm

S&F Aluminium anodised barrel tower bolts of extruded sections of size 150 mm.

S&F Aluminium anodised barrel tower bolts of extruded sections of size 100mm

S&F in repairs Aluminium anodised barrel tower bolts of extruded sections of size 100mm

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of length .

S&F in repair Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of length.

S & F 3 mm thick Sheet glass, ordinary quality and glazing in squares not exceeding 0.5 Sq. M in each pane

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S & F 4.8 to 5 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane

S&F Stainless steel wire cloth, 0.36mm dia of wire and average width of aperture 1.40mm and fixed in gauged wooden door or alluminium window/ ventilator complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Stainless steel wire cloth, 0.36mm dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, and including II nd class hard wood beads straight (any size) for lazed or gauged joinery renewed incl mitrtrd etc. and painting exposed surfaces of beads with two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparing new steel surfaces of any description over 10 cm girth and width and applying two coat of synthetic enamel paint over and including a coat of red oxide primer, complete all as specified.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer etc all complete

M&L for preparation of old painted wooden surfaces and applying a coats of synthetic enamel paint etc all complete.

Taking down cement plaster and the like from brick or stone wall and concrete surfaces including racking out joints, hacking for keys, scrubbing down with water etc., complete all as specified.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6, including finishing even and smooth without using extra cement, complete all as specified.

M&L for preparation of new plaster surface and applying two coats of distemper oil emultion on new wall surfaces and including treating with 1mm thick wall care putty and a coat of primer, white or tinted complete all as specified and directed

Preparing newly plastered surfaces of walls and applying three coats of white wash.

S & F Plain Aluminium sheeting 0.56 mm thick in straight flashing fixed in repair complete all as specified and as directed

S & F in repair Floor door stopper of Aluminium alloy body and tongue, anodised, with rubber shoe 150 mm long etc all complete.

S & F Mild steel work in framed work such as grills, Framed guard bars, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165.

S & Fin repairs 25 mm stainless steel curtain rod all as specified and as directed.

S & F inrepairs 25 mm decorative Brackets for curtain rod all as specified and as directed

S& F in repair aluminium powder coated door seal with brush fixed by screw at bottom of door all as speified and as directed

S & F Powder Coated Aluminium frame for doors, windows, ventilators, fixed partitions etc., with one or more rebates with powder coating of minimum 50 micron thick including joining cleat for fixing etc., complete all as specified.

S & F Powder Coated Aluminium window and ventilator shutters, fixed type without sash bar with powder coating of any colour of minimum 50 micron thick,, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc., complete all as specified. Note 4.8 mm thick glass or stainless steel wire cloth shall be measured and paid separately.

S&F powder coated of any colour (thickness of powder coating not less than 15 micron) aluminium window/ventilator shutters pin head of side hung type without sash , aluminium sections weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking , anodised aluminium snap beading screws, anodised aluminium fittings aluminium powder coated hinges 75mm long in glazed shutter suitable handle 1No and 100 mm powder coated aluminium tower bolt (02 Nos) with aluminium flat and screws complete all as specified and directed. Note 4.8 mm thick glass or stainless steel wire cloth shall be measured and paid separately.

S & F powder coated aluminium deco grill with apperture of size 50 x 50 mm securing with suitable aluminium channel to frame complete all as specified and as directed Make: Jindal or equivalent section from Hindalco/Inddalco/MS Ajit Ind Pvt Ltd

D RAVICHANDRAN (BID ID -3473420)