REPAIR/REPLACEMENT OF BLDG MAIN/DISTRIBUTION PANEL, METER BOX INCLUDING REPLACEMENT OF CONNECTED SERVICE CABLE, EARTHING AND OTHER MISC E/M MAINTENANCE WORKS UNDER GE (AF) ADM AREA GWALIOR

M&L for disconnecting and removing existing unserviceable/damaged mild steel sheet enclosure of any description and in any position complete all as specified and directed.

Supply ,install, testing & commissioning of Indoor type, Wall mounted (with anchor bolts & nuts and PCC work as required) compartmentalized type Meter Cabinet of overall dimension 1800mm (L) x 800mm (W) x 200mm (D) made out of 2.0 mm thick CRCA Sheet with front door having inspection window duly covered with transparent polycarbonate / glass panel for viewing KWh meter . All doors should have gasket and locking arrangement to meet ingress protection level IP-43. The cabinet shall be painted both internally and externally with powder coated paint (RAL 7032 : SIEMENS GREY) two coats after necessary over a coat of red oxide . The cabinet shall be comprising of following accessories :- a) Four pole MCCB, 125 Amps with breaking capacity 25 KA ICU = ICS having fixed thermal and fixed magnetic release and spreader link at both incoming and outgoing side.- 01 No. b) Copper Bus Bar of size 25mm x 3mm duly mounted on FRP insulators and necessary drilling for 1 incoming & minimum 8 outgoing connections and duly covered with heat shrinkable PVC sleeves of standard colour code - 4 Nos. c) MCB SPN 40 Amps, 10 KA - 8 Nos ( To be connected with 8 Nos Meters) d) MCB SP 10 Amps, 10 KA -2 No ( For common lighting & spare) e) LED indicating Lamps -03 Nos. f) Internal wiring with 1100V grade FRLS PVC insulated multi flexible copper wire of sizes duly crimped with copper lugs of suitable size & type all as mentioned below :- i) MCCB to Bus Bar - 10.0 Sqmm copper ii) Bus Bar to Cable Connector via KWh meter - 6.0 Sqmm Note:- 1. The panel shall be suitable to accomodate 08 smart energy meter with all accessories. 2. Meter dismantling and refixing will be paid in respective item of Sch/BOQ. 3. Individual qtr sub main wiring will be disconnected from old panel and reconnected to new panel. 4. The quoted rate shall be deemed to be included of above.

Supply ,install, testing & commissioning of Indoor type, Wall mounted (with anchor bolts & nuts and PCC work as required) compartmentalized type Meter Cabinet of overall dimension 1500mm (L) x 800mm (W) x 200mm (D) made out of 2.0 mm thick CRCA Sheet with front door having inspection window duly covered with transparent polycarbonate / glass panel for viewing KWh meter . All doors should have gasket and locking arrangement to meet ingress protection level IP-43. The cabinet shall be painted both internally and externally with powder coated paint (RAL 7032 : SIEMENS GREY) two coats after necessary over a coat of red oxide . The cabinet shall be comprising of following accessories :- a) Four pole MCCB, 100 Amps with breaking capacity 25 KA having fixed thermal and fixed magnetic release and spreader link at both incoming and outgoing side.- 01 No. b) Copper Bus Bar of size 25mm x 3mm duly mounted on FRP insulators and necessary drilling for 1 incoming & minimum 6 outgoing connections and duly covered with heat shrinkable PVC sleeves of standard colour code - 4 Nos. c) MCB SPN 40 Amps, 10 KA - 6 Nos ( To be connected with 6 Nos Meters) d) MCB SP 10 Amps, 10 KA -2 No ( For common lighting & spare) e) LED indicating Lamps -03 Nos. f) Internal wiring with 1100V grade FRLS PVC insulated multi flexible copper wire of sizes duly crimped with copper lugs of suitable size & type all as mentioned below :- i) MCCB to Bus Bar - 10.0 Sqmm copper ii) Bus Bar to Cable Connector via KWh meter - 6.0 Sqmm Note:- 1. The panel shall be suitable to accomodate 06 smart energy meter with all accessories. 2. Meter dismantling and refixing will be paid in respective item of Sch/BOQ. 3. Individual qtr sub main wiring will be disconnected from old panel and reconnected to new panel. 4. The quoted rate shall be deemed to be included of above.

Taking down Electric Meter any make and any size and deposit in safe custody with MES store yard and re-fixing after completion of work complete all as specified and directed.

M&L for disconnecting and removing existing unserviceable /damaged mild steel sheet enclosure of any description and in any position complete and Supply ,install, testing & commissioning of Indoor type, Wall mounted (with anchor bolts & nuts and PCC work as required) compartmentalized type Meter Cabinet of overall dimension 1800mm (L) x 800mm (W) x 200mm (D) made out of 2.0 mm thick CRCA Sheet with front door having cut out duly covered with transparent polycarbonate / glass panel for viewing KWh meter and other door shall be opaque. All doors should have gasket and locking arrangement to meet ingress protection level IP-43. The cabinet shall be painted both internally and externally with powder coated paint (RAL 7032 : SIEMENS GREY) after necessary surface treatment. The cabinet shall be fabricated as per the drawing and comprising of following accessories :- (A) a) Copper Bus Bar of size 25mm x 3mm duly mounted on FRP insulators and necessary drilling for 1 incoming & minimum 8 outgoing connections and duly covered with heat shrinkable PVC sleeves of standard colour code - 4 Nos. b) LED indicating Lamps. Internal wiring with 1100V grade FRLS PVC insulated multi flexible copper wire of sizes duly crimped with copper lugs of suitable size & type all as mentioned below :- i) MCCB to Bus Bar - 10.0 Sqmm copper ii) Bus Bar to Cable Connector via KWh meter and MCB - 6.0 Sqmm iii) Bus Bar to LED Lamp via MCB - 1.5 Sqmm (B) The Panel shall have suitable provision and space for fixing of following :- (a) MCCB 125 Amps 4 pole - 01 No (b) MCB SPN 40 Amps - 08 Nos ( To be connected with 08 Nos meter) (c) MCB SP 10 Amps - 02 No ( for common lighting & spare) (d) Smart Energy Meter - 08 Nos Note:- The serviceable items retrived from dismantling panel shall be refixed in new panel and quoted rate deemed to be inclusive of above cost of fixing.

M&L for disconnecting and removing existing unserviceable /damaged mild steel sheet enclosure of any description and in any position complete and Supply ,install, testing & commissioning of Indoor type, Wall mounted (with anchor bolts & nuts and PCC work as required) compartmentalized type Meter Cabinet of overall dimension 1500mm (L) x 800mm (W) x 200mm (D) made out of 2.0 mm thick CRCA Sheet with front door having cut out duly covered with transparent polycarbonate / glass panel for viewing KWh meter and other door shall be opaque. All doors should have gasket and locking arrangement to meet ingress protection level IP-43. The cabinet shall be painted both internally and externally with powder coated paint (RAL 7032 : SIEMENS GREY) after necessary surface treatment. The cabinet shall be fabricated as per the drawing and comprising of following accessories :- (A) a) Copper Bus Bar of size 25mm x 3mm duly mounted on FRP insulators and necessary drilling for 1 incoming & minimum 8 outgoing connections and duly covered with heat shrinkable PVC sleeves of standard colour code - 4 Nos. b) LED indicating Lamps. Internal wiring with 1100V grade FRLS PVC insulated multi flexible copper wire of sizes duly crimped with copper lugs of suitable size & type all as mentioned below :- i) MCCB to Bus Bar - 10.0 Sqmm copper ii) Bus Bar to Cable Connector via KWh meter and MCB - 6.0 Sqmm iii) Bus Bar to LED Lamp via MCB - 1.5 Sqmm (B) The Panel shall have suitable provision and space for fixing of following :- (a) MCCB 100 Amps 4 pole - 01 No (b) MCB SPN 40 Amps - 06 Nos ( To be connected with 06 Nos meter) (c) MCB SP 10 Amps - 02 No ( for common lighting & spare) (d) Smart Energy meter - 06 Nos Note:- The serviceable items retrived from dismantling panel shall be refixed in new panel and quoted rate deemed to be inclusive of above cost of fixing.

S&F MCB single pole 6 to 30 Amps, "B" Curve 10KA ,240 Volts complete all as specified and directed.

S&F MCB Single pole and neutral 40 Amps, 240 Volts complete all as specified and directed.

Supply and fixing in repair MCB DB SPN 12 way double door 230 volt, IP-43, supply complete fixed properly and to connect their incoming/outgoing electric connections by means of suitable size of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB's of cables/wires complete all as specified and directed.

Supply and fixing in repair MCB DB SPN 16 way double door 230 volt, IP-43, supply complete fixed properly and to connect their incoming/outgoing electric connections by means of suitable size of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB's of cables/wires complete all as specified and directed.