IMPROVEMENT OF SMQs AND OMQs AT AF STN NAL (PHASE-II)

Amount

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for including floor finishes complete all as specified and as directed.

Providing and injecting emulsion for post constructional antitermite treatment using chemical chloropyriphos 20 EC conforming to IS 8944 or lmidacloprid 30.50 SC conforming to IS 16131 concentrate along the external wall of building below concrete or masonry apron using chemical emulsion @ 2.25 litre per linear metre including drilling 12mm dia holes @ 300 mm apart and plugging holes with cement mortar 1:2 (1 Cement 2 Coarse sand) in apron complete all as specified and as directed.

Providing and injecting chemical emulsion for post constructional antitermite treatment using chemical chloropyriphos 20 EC conforming to IS 8944 or lmidacloprid 30.50 SC conforming to IS 16131 of soil under existing floors using chemical emulsion @ 0.75 Ltre per hole 300mm apart including drilling 12mm dia holes @ 300 mm apart and plugging holes with cement mortar 1:2 (1 Cement & 2 Coarse sand) to match the existing floor and making good the disturbed sufaces to match with the existing surface complete all as specified and as directed.

Providing and injecting chemical emulsion for post constructional antitermite treatment at points of contact of wood work by using chemical chloropyriphos 20 EC conforming to IS 8944 or lmidacloprid 30.50 SC conforming to IS 16131 emulsion in oil or kerosene based solution @ 0.5 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree @ 150mm centre to centre and sealing the same and making good the disturbed sufaces to match with the existing surface complete all as specified and as directed.

Demolition of brickwork or stone masonry built in cement mortar including all quoins, arches, pillar, etc. complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6m mean radius, built in CM 1:6. complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks old size, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed.

Material and labour for cement concrete 1:5:10, type E2 (using 40 mm graded stone aggregate), as in foundations, filling and mass concrete in sunken floors complete all as specified and as directed.

Material and labour for 15mm thick plastering/screed bed or bedding layer in cm 1:4 on brick / concrete surfaces as in sunken floor mixed with water proofing compound as per manufacturers instruction, even and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately

Cutting grooves in brick wall,75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 and inserting water proofing felt/membrane complete all as specified and as directed.

Supply only liquid integral water proofing compound.

Material and labour appying a tack coats of industrial bitumen 85/25 grade at the rate of 1.2 Kg per Sqm as in sunken floor portion including preparation plaster concrete surface complete all as specified and as directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing ) and rubbish off premises complete all as specified and as directed.

Material and labour for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in sub base of floor complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 ( using 40mm graded aggregate) as in plinth protection, laid in alternate bays, surface finished even and smooth without using extra cement including making joints complete all as specified and as directed.

Material and labour for 25 mm thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in sub base, correcrion floors, surface finished even and rough to receive floor finishes complete all as specified and as directed.

Material and labour for non-skid Joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including screed bed or bedding layer of 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

Material and labour for non-skid Joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including screed bed or bedding layer of 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

Material and labour for ceramic coloured tiles 7 to 8mm thick (Square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces such as skirtings, dados and risers to steps, set and jointed in neat cement slurry and pointed with coloured cement to match the shade of tiles, over and including 10mm thick rendering on fair faces of brickwork or concrete surfaces in CM 1:4 complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as skirtings, dados and risers to steps, set and jointed in neat cement slurry and pointed with coloured cement to match the shade of tiles, over and including 10mm thick rendering on fair faces of brickwork or concrete surfaces in CM 1:4 complete all as specified and as directed.

Material and labour for vitrified ceramic coloured tiles 10mm thick of size 600mmx600mm double charged light shade as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including screed bed or bedding layer of 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

Material and labour for vitrified ceramic coloured tiles 10mm thick of size 600mmx600mm double charged light shade as in skirting, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 10mm thick rendering on fair faces of brickwork or concrete surfaces in CM 1:4 complete all as specified and as directed.

Dismantling of stone slabs of any description or any thickness laid bedded and pointed in any mortar in floors, approns etc. complete all as specified and as directed.

Material and labour for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, landings, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer of mortar in CM 1:6, and incliding rounding of edges of granite slabs 10 to 20 mm thick by grainding, rubbing and finished smooth, coloured as approved by GE complete all as specified and as directed. Note: Front facia edges of granite slabs shall be rounding and finished smooth. The contractor shall quote his rates considering the above element, no extra will be paid for this.

Material and labour for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in vertical surfaces and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick rendering on fair faces of brickwork or concrete surfaces in CM 1:4 complete all as specified and as directed.

Material and labour for 20-25 mm thick, machine cut kota stone slab as in flooring / landing/treads of stairs, over and including 15mm thick cement screed bed in CM 1:4 , laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab and including rubbing, polishing and making grooves in treads ( as required ) complete all as specified and as directed.

Material and labour for 20-25 mm thick, machine cut kota stone slab as in skirting/ risers of stairs, over and including 10 mm thick rendering in CM 1:4, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab and including rubbing and polishing complete all as specified and as directed.

Material and labour for 18-20 mm thick, machine cut green marble stone slab flooring, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick cement screed bed in CM 1:6 complete all as speicifed and as directed.

Material and labour for 18-20 mm thick, machine cut green marble stone slab as in skirtings / dados over and including rendering10 mm thick cement plaster in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as speicifed and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in slabs, suported on walls, beams and columns in floors, roofs, landings balconies, canopies, deck slabs, shelves and the like complete all as specified and as directed.

Formwork to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exc 200 mm thick horizontal or sloping , rough finished flat surfaces complete all as specified and as directed

Formwork to edges of concrete flats, treads, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide complete all as specified and as directed.

Supply and fixing for mild steel "TMT" bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fixing for rolled mild steel sections as in main and cross beams, colomns , hip and jack rafters, purlins where connected to common rafters and fixed with angle cleats,base plates , or other connecting plates, neccesary fastners confirming to Fe-410W, Gde E-250 quality'A' including welding complete all as specified and as directed.

Material and labour for cement concrete 1:2:4, type B1 as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

Supply and fixing pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

Supply and fixing mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Supply and fixing mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders; framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.

Supply and fixing 1.25 mm thick pressed Steel door frames, size 125x60mm for doors with one or more rebates inclding necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

Supply and fixing 1.25 mm thick pressed Steel door frames, size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

Supply and fixing solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded prelam PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, both side prelam PVC sheet used insted of plain colour PVC sheet. Stile and rail feathered edges paneling of prelam solid sheets 10 mm thick to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified in SSR Part -II.

Supply and fixing 30 mm thick flush shutters, solid core construction, with block board core, both face is covered with 0.9mm thick decorative laminated suface finish, colour or pattern as approved, fixed with approved adheshive as per manufacturer's instructions with lipping/frame to match complete all as specified and as directed.

Supply and fixing factory made Glazed & Skeleton shutters, 35mm thick, open rebated and prepare to received glass, gauge, etc., edges of framing plain chamfered or rounded in window, ventilator, etc. are provided with stiles and rails in 2nd class hard wood all as specified in SSR part-I, section 8 clause 8.24(a) complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening or easing & adjusting etc. complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate for filling back hollow pressed steel door frames, bed blocks etc. complete all as specified and as directed.

Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width aperture 1.40mm and fixed with stainless wire staples complete all as specified and as directed.

Supply and fixing extruded aluminium alloy hinges 100mm , fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing 150 mm size extruded aluminium alloy handels, fabricated type, anodised, fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed

Supply and fixing mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.

Supply and fixing 150mm long aluminium anodised barrel tower bolt, extruded section,fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing 200mm long aluminium anodised barrel tower bolt, extruded section,fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing 300mm long, aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) fixing clips of sheet, cast or extruded setions and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed with stainless steel screws complete all as specified and as directed.

S & F in repair pressed steel factory made cupboard shutter with frame of 1.25 mm thick and shutter 1 mm thick PBI sheet with 6 nos 3. 15 mm thick and 100 mm long steel (hinges godrej patern) locking arrangement incl 12 mm dia vertical rod incl spray painting in factory as approved pattern all as directed. Make : Godrej/ Featherlite furniture / Euro coustic product ltd / Allwyn

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Supply and fixing 15mm bore tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing 20mm bore tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and as directed.

Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supply and fixing in repairs vitreous china white wash down water closet pan (padestal pattern) including white plastic seat cover with CP hinging device and PVC "P" trap, including connection to trap, drain pipe, flushing cistern & anti syphonage pipe complete all as specified. Note : The cost of traps and plastic seat cover are included in this item.

Supply and fixing in repairs Vitreous china, squatting pan "orrisa" pattern 580 X 440mm with integeral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacity and 32 mm dia flush pipe of polyethylene of low or high density complete all as specified and as directed. Note : The cost of traps , flushing cistern and PVC flush pipes are included in this item.

Supply and fixing in repairs vitreous china, wash hand basin, star white size 550mm x 400 mm including CI brackets, CP waste coupling,waste pipe 32 mm bore complete all as specified and as directed.

Supply and fixing in repairs sinks with drain board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including providing and fixing cantilever CI brackets, waste pipe, waste coupling and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. Note : (i) The cost of waste coupling , PVC waste pipes are inclusive with this item and nothing extra will be admissible in to this account .

Supply and fixing in repairs fancy type, pillar taps of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repairs 15 mm stop valves/angle valves , fancy type, chromium plated , cast copper alloy,screwed down, high pressure, with flange cap, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply and fixing 15 mm bore brass CP wall mixer with L bend for mixing hot & cold water screwed down for iron pipe and fixed,with flange cap, screwed both ends for iron pipe or for GI pipe / unions and fixed including taking down existing PTMT taps complete all as specified and as directed.

Supply and fixing in repairs 15mm, long body, bib taps, long shank, fancy type, chromium plated with crutch or butterfly hadle, secrwed for iron piper or for brass ferrule complete all as specified and as directed.

Supply and fixing in repairs 15mm, short body, bib taps, fancy type, chromium plated with crutch or butterfly hadle, secrwed for iron piper or for brass ferrule complete all as specified and as directed.

Supply and fixing in repairs 15 mm bore, brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed.

Supply and fixing in repairs 15mm bore PVC connection pipe 450mm long with brass nuts at both ends complete all as specified and as directed.

Supply and fixing in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges, chromium plated including brackets, screws and wooden/plastic cleats complete all as specified and as directed.

Supply and fixing stainless steel plate rack of size 31" x 30" x 10" of load capacity not less than 30 kg including fixing with stainless steel screws including taking down of old plate rack of any description complete all as specified and as directed.

Supply and fixing in repairs Stainless steel ( SS 202 grade ) Curtain rod, 25 mm dia, 0.80 mm wall thickness, mild steel, chromium plated including supporitng brackets as per sample complete all specified and as directed.

Supply and fixing in repairs Stainless steel (Grade 305) ornmental type brackets (Open ends) suitable for curtain rods of 25mm dia complete all specified and as directed.

Supply and fixing in repairs Stainless steel (Grade 305) brackets (Dead ends) suitable for curtain rods of 25mm dia complete all specified and as directed.

Supply and fixing in repairs 75 mm bore PVC (SWR) floor trap, plain with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Supply and fixing in repairs 100 mm bore PVC (SWR) floor trap, plain with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Supply and fixing in repairs toilet paper holder of brass body, chromium plated fixed to walls with chromium plated brass screws complete all as specified and as directed.

Supply and fixing in repairs 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve and brackets, float and handle, L-Bend complete all as specified and as directed.

Supply and fixing in repairs PVC Cabinet Mirror size 330 x 430 mm with 3mm thick mirror complete all as specified and as directed. Make: Prayag/Shakti/Polytuff

Supply and fixing in repairs Central hole basin mixture with capstan heads,fancy type heavy duty,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and as directed .Make:-Jaquar/Hindware/Cera

Supply and fixing in repairs two way, angle valves, chromium plated with flange, 15mm dia complete all as specified and as directed. Make:-Jaquar/Hindware/Cera

Supply and fixing in repairs health faucet with 1.25 mtr flexible hose pipe & wall hook(Chromium plated) complete all as specified and as directed. Make:-Jaquar/Cera/Hindware

Supply and fixing in repairs wall mixer 3 in 1 with 'L' bend,chromium plated, fancy type including three joints and fixed to steel pipe or union for 15mm bore pipe complete all as specified & as directed. Make:-Jaquar/Hindware/Cera/Prayag

Supply and fixing in repairs CP Sink mixture with swinging spout(wall mounted model) with connecting legs & wall flanges complete all as specified and as directed. Make:-Jaquar/Hindware/Cera

Supply and fixing in repairs corner glass shelf as approved Desing complete all as specified and as directed. Make :- Jaquar/Hindware/Cera/Prayag

Supply and fixing in repairs Soap Dish as approved Design complete all as specified and as directed. Make :- Jaquar/Hindware/Cera/Prayag

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 110 mm bore PVC pipe, complete all as specified and as directed.

Desilting of manhole complete by removing all scum, sludge, silt (both organic and inorganic nature) by manual labour or mechanical scraper and disposal of the same and buried in trenches etc. as in foul condition for any depth complete all as specified and as directed. Note:- Sludge, scum, silt (both organic and inorganic nature) water shall be disposed off in closed container at authorized dumping site declared by local administration outside MD land.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc. or for shafts wells, cesspits, manholes, pier holes etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated soil n exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and as directed.

Demolition and breaking up 75/100mm dia, drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed

Supply and fixing 110mm bore, PVC SWR Pipes, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed

Supply and fixing 110mm bore, PVC SWR Pipes, single socketed, in any length with rubber ring joints,laid in trenches complete all as specified and as directed

Supply and fixing 75mm bore, PVC SWR Pipes, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed

Supply and fixing 75mm bore, PVC SWR Pipes, single socketed, in any length with rubber ring joints,laid in trenches complete all as specified and as directed

Supply and fixing PVC (SWR) bends of 110 mm bore complete all as specified and as directed.

Supply and fixing PVC (SWR) bends of 75 mm bore with access door complete all as specified and as directed.

Supply and fixing PVC (SWR) bends of 75 mm bore complete all as specified and as directed.

Supply and fixing PVC (SWR) bends of 110 mm bore with access door complete all as specified and as directed.

Supply and fixing PVC(SWR) reducer 110mm to 75 mm dia complete all as specified and as directed.

Supply and fixing PVC SWR 110mm bore, Junction single (Single T) with access door complete all as specified and as directed.

Supply and fixing PVC (SWR) gully trap 125/110mm, setting & jointing with solvent cement fixed in repairs complete all as specified and as directed. Make: Finolex, Superme, Prince

Supply and fixing 75mm bore, PVC (SWR) vent cowl complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. Note :- The demolished material should be disposed off outside MoD land. The contractor shall quote his rates considering the above element, no extra paid on this.

Material and labour for repairing of RCC projection, chajjas, facia, bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion of RCC at any height and in any situation / floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of weather proof emulsion paint to match with existing surfaces complete all as specified and as directed. Note:-Unit rate of this item includes the cost of scaffolding,formwork etc. and nothing extra shall be paid on account of variation in height.

Supply and fixing hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcent. Weight per square metre n exc 4 Kg complete all as specified and as directed

Material and labour for rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

Material & Labour for preparation of new plastered wall surfaces and apply two coats of Arcylic Smooth exterior paint of required shade applied over one coat of alkali resistant primer in camaflouge pattern, tint as approved complete all as specified and as directed.

Material and labour for rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of new plastered/ concrete surfaces and applying two coats of oil bound distemper over a coat of primer over and including two coat of wall care putty complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Material and labour for rendering 5 mm thick, cement plaster in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Complete removal of existing treatment on walls by with mechanical / electrical driven grinders suitable for removal work, scrapping, washing, rubbing down, etc. and applying two coats of oil bound distemper over and including two coat of wall care putty with one coat of primer complete all as specified and as directed.

Complete removal of existing treatment on ceiling by scrapping, washing, rubbing down, etc. and applying two coats of white wash complete all as specified and as directed.

Material and Labour for complete removal of existing wall treatment including washing rubbing down and stopping of distempered or painted surfaces including all cornices, pilasters etc( plastered or unplastered) etc. and applying two coats of acrylic exterior emulsion paint of approved colour/shade as in camouflaging pattern over a coat of primer complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of wall and applying two coats of white wash complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces and applying two coats of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description not other described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description not other described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old wooden surfaces and applying two coats of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.

Dismantling water tanks any type of capacity exc 250 but n.exc 500 liters complete all as specified and as directed.

Dismantling water tanks any type of capacity Exc 500 but n.exc 1000 liters complete all as specified and as directed.

Supply and fixing 500 liter capacity, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) tripple layered white, hoisted and fixed in position complete all as specified and as directed.

Supply and fixing 1000 liter capacity, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) tripple layered white, hoisted and fixed in position complete all as specified and as directed.

Supply and fixing 20mm bore, PTMT nipple suitable for HDPE water tank (minimum weight 45gms) complete all as specified and as directed.

Supply and fixing 25 mm dia, ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc for 500 ltr capacity water tanks complete all as specified and as directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc for 1000 ltr capacity water tanks complete all as specified and as directed

Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames of doors, windows,ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directionsof Engineer-in-Charge.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket , dust proof brush as required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,rollers & dust proof brush for sliding door / window complete all as per architectural drawings and the directions of Engineer-in-Charge.

Supply and fixing 4.80 mm thick sheet glass of ordinary quality plain /tinted and including glazing with suitable rubber beads etc complete all as specified and as directed.

Supply and fixing anodised aluminum grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anode coating of grade AC15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminum standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

Supply and fixing extruded aluminium alloy hinges 75mm , fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing 100 mm size extruded aluminium alloy handels, fabricated type, anodised, fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing 100mm long aluminium anodised barrel tower bolt, extruded section,fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing concealed lock (push to unlock) for sliding window made with zinc body, aluminium hook and anti rust material with power coated metalic finish of approved colour having size 100mm x 24 mm incl necessary cutting for fixing all as specified and as directed.

Material and labour for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base / sub-floor complete all as specified and as directed.

Supply and laying glossy finished, chequered cement concrete tiles 30cmx30cmx22mm thick made by table vibratory method, set, jointed and pointed in neat cement slurry as in floors with white cement & pigment over and including 15mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified and as directed.

Dismantling boarding, any description any size , fixed in any position with screws complete all as specified and as directed.

Fixing only for Modular kitchen cabinet comprising of following :- i) Wire basket bottle rack- 1 Nos ii) Wire basket cutlery box- 1 Nos iii) Wire basket grain trolly- 1 Nos iv) Wire basket plate rack- 2 Nos v) Wire basket cup and saucer rack- 2 Nos vi) Plain Wire basket different patterns- 9 Nos with all fittings/ fixtures hinges, telescopic channel, handles etc. and including manufacturing of all cabinet made of 18 mm thick celluka PVC board, plain/ prelaminated colour PVC board and fixing the items fitted in position icluding all fasteners like screws, adhesives and nut and bolts in all as per space available at site complete all as specified and directed by engineer in charge. Note: a) All the above said accessories such as baskets, hinges, handles, ball bearing shall be measured as supply only under respective items. b) The qty against item no 156 to 164 may vary being measurable items and nothing plus/ minus shall be paid if the quantities are varied while execution on ground. c) The mode of measurement for the said item shall inclusive of all fixing, screws, nut, bolts, adhesives etc. used to fabricate the said cabinet and fix in position and measured as for each for one complete Qtr .

Supply Only 18 mm thick Celluka Ply of density 600kg/cum of plain colour Sheet for kitchen cabinet sides, top, bottoms and shelves inside the cabinet complete all as specified and as directed. Make: Rajshree Plastiwood/ Sintex/ Greenply/ Centuryply/ HR Enterprises

Supply Only 18 mm thick Celuka Ply of density 600kg/cum one side prelam/Rigidlam (Colour/Shade as approved by GE) and other side plain white colour to make kitchen cabinet shutters / drawer Make: Rajshree/ Sintex/ Greenply/ Centuryply/ HR Enterprises

Supply Only auto closes clip on cabinet hinges (regular) for kitchen cabinet shutters Make: Hettich / Godrej/ Ebco Note : Each pair means one piece fixed on openable shutter and other piece fixed on fixed portion.

Supply Only Ball bearing drawer channel, telescopic type (500mm) Full Extention Load of load bearing capacity 45 Kg. Make: Hettich / Godrej/ Ebco Note : Each pair means 2 nos of telescopic channel, one piece fixed on left side and another piece fixed on right side.

Supply Only Stainless Steel (SS 304) handles 100 mm size for Kitchen Cabinet Shutters. Make: Hettich / Godrej/ Ebco

Supply Only CP Stainless Steel (SS 304) Wire basket two shelf pull out (bottle rack) of size 150 x 485 x 430 mm Make: Hettich / Godrej/ Ebco

Supply Only CP Stainless Steel (SS 304) Wire basket (Cutlery Box ) size 420x 485x 100mm Make: Hettich / Godrej/ Ebco

Supply Only CP Stainless Steel (SS 304) Wire basket (Grain Trolly ) size 425 x 495x 350 mm Make: Hettich / Godrej/ Ebco

Supply Only CP Stainless Steel (SS 304) Wire basket (Plate rack) size 420x 485x 150mm Make: Hettich / Godrej/ Ebco

Supply Only CP Stainless Steel (SS 304) Wire basket (Cup and Soucer rack ) size 420x 485x 100mm Make: Hettich / Godrej/ Ebco

Supply only CP stainless Steel (SS304) plain Wire basket of size 420x485x100 mm Make: Hettich / Godrej/ Ebco

Supply only CP stainless Steel (SS304) plain Wire basket of size 420x485x150 mm Make: Hettich / Godrej/ Ebco

Supply only CP stainless Steel (SS304) plain Wire basket of size 420x485x200 mm. Make: Hettich / Godrej/ Ebco

Supply and fixing 18 mm thick Celuka Ply of density 600kg/cum of plain colour Sheet for kitchen cabinets sides, top, bottoms and shelves inside the cabinet complete all as specified and as directed. Make: Rajshree Plastiwood/ Sintex/ Greenply/ Century ply/ HR Enterprises

Supply and fixing 18 mm thick Celuka Ply of density 600kg/cum one side prelaminated/Rigidlam (Colour/Shade as approved by GE) and other side plain, white colour to make kitchen cabinet shutters / drawer complete all as specified and as directed. Make: Rajshree/ Sintex/ Greenply/ Century ply/ HR Enterprises

Supply and fixing Auto closes clip on cabinet hinges (regular) for kitchen cabinet shutters complete all as specified and as directed. Make: Hettich / Godrej/ Ebco Note : Each pair means one piece fixed on openable shutter and other piece fixed on fixed portion.

Supply and fixing Stainless Steel (SS 304) handles 100 mm size for Kitchen Cabinet Shutters complete all as specified and as directed. Make: Hettich / Godrej/ Ebco

Taking down old existing sub main wiring copper/ aluminium conductor including conduit/ casing and capping etc. complete all as specified and as directed.

Taking down old unserviceable main switches, DBs / change over switch along with Teak wood boards, etc. and making good the disturbed surfaces of wall / floors to match the existing surface complete all as specified and as directed.

Taking down carefully old MCBs/Isolators any type by unscrewing from board complete all as specified and as directed.

Material and labour for point wiring using 1.1 kV grade single core FR-LSH flexible cable, conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral, and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade UPVC surface / recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 20 mm NB, including cutting chases, factory made not less than 1.2 mm thick sunken, modular flush sheet galvanized metal enclosure having zinc coating not less than 120 GSM, , conforming to IS 14772: 2000, having top, bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover-plates and making good of disturbed surfaces of wall / ceiling / floor, etc. complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Make: FR-LSH Flexible Cable: Polycab, RR Kabel, Havells; Medium grade UPVC conduits: Precision, Prince, Supreme Notes- [i] Wiring from the DB (distribution box) to terminal boxes for power plugs, fan regulators, switches, socket outlets, etc. shall be deemed inclusive in the quoted rates.

One light point controlled by one switch, with cables 1.5 sqmm size

One 6 A socket outlet, independent, with cables 1.5 sqmm size

One 16 A socket outlet, independent, with cables 2.5 sqmm size

Supply and fixing modular type 2/3 pin combined shuttered type 16 A socket, conforming to IS 1293: 2005 complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Make: Legrand , Anchor, L & T

Supply and fixing modular type 2/3 pin combined shuttered type 6A socket, conforming to IS 1293: 2005 complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Make: Legrand, Anchor, L & T

Supply and fixing modular type 6 A 1-way SP switch conforming to IS 3854: 2012 with finger-proof terminal complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Make: Legrand, Anchor, L & T

Supply and fixing modular type 16 A 1-way SP switch conforming to IS 3854: 2012 with finger-proof terminal complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Make: Legrand, Anchor, L & T

Material and labour for ceiling rose, surface bakelite 65 x 50 mm, three terminals complete all as specified and as directed.

Supply and fixing sheet metal enclosure 20 Amps single pole and natural with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB 20 Amp fixed properly in concealed position including making good disturbed surfaces complete all as specified and as directed.

Material and labour for Cutting, Opening through existing brick walls of 300 mm dia to be for exhaust fan/ventilating fan and finished with the disturbed wall by cement plastering and cement mortar 1:4 and match with the existing surface complete all as specified and as directed.

Supply and fixing exhaust fan 300 mm dia including louvers AC single phase 240 volts of size 300 mm sweep(metal body) and not less than 900 RPM including flexible wire 3 core 1.5 Sqmm from ventilator fan to ceiling rose complete all as specified and as directed.

Supply and fixing energy saving ceiling fan 1200 mm sweep with double ball bearing with ISI marking and BEE 5 star rated complete including provision of three core copper wire of suitable size,electronic regulator, etc. connected from ceiling rose to fan and marking MES No in black paint complete all as specified and as directed.

Material and labour for 250 mm long white colour anti sucide down rod for fixing ceiling fan with and including all fixing arrangement complete all as specified and as directed.

Supply and fixing MCB DB double door, TPN 4 way, IP 43 IK 9 protection with sheet metal enclosure with isolated neutral bus bar DB suitable for Door earthing, insulated copper busbar assembly for mounting MCB SP / TP complete all as specified and as directed.

Supply and fixing MCB TPN, 40 Amps, breaking capacity 10 KA 'C' curve confirming to IS-8828, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connections with suitable size of copper lugs, etc. Complete all as specified and as directed.

Supply and fixing sheet metal enclosures MCB SPN DB 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 with double glazed door for incorporating MCBs, IP-43 including taking down old unserviceable single phase DBs complete all as specified and as directed.

Supply and fixing MCB SPN 40 amps 'C' series breaking capacity 10 KA, 'C, curve 240 volts, 50 Hz including necessary incoming and outgoing electric connections with suitable size of copper lugs etc. Cmplete all as specified and as directed.

Supply and fixing MCB SP, 6 to 40 Amps, 'C' series breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connections with suitable size of copper lugs etc. Complete all as specified and as directed. Make : L&T/legrand/Havells/ABB

Supply and fixing MCB TP, 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS-8828, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connections with suitable size of copper lugs to be fixed in existing DB etc. Complete all as specified and as directed.

Supply and fixing in replacement Vertical load line DB double door TPN, 4 way, IP 43 protection with and including 4 pole MCCB 100 Amps, 16 KA sheet metal enclosure with isolated neutral bus bar suitable for Door earthing, insulated 200 Amps rated busbar assembly for mounting MCB single pole/ three pole complete all as specified and as directed. Note : Rate quoted shall deemed to be including for cutting existing wall for fixing DB in concealed making connections of sub main wiring (incoming and outgoing) with suitable size of cable lugs etc. and making good the existing surfaces.

Material and labour for sub-main wiring with two single core 4 sqmm FRLSPVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of masonary including 20 mm dia non-metallic PVC conduit fixed in wall including 4 sqmm copper earth continuity wire, accessories and connecting to earth dolly for AC points complete all as specified and as directed. Note : 2 Run of 4 Sqmm, 1 Run of PVC conduit & 1 Run of 4 Sqmm earth cable shall be measured as single unit length.

Material and labour for sub-main wiring in concealed PVC conduit with two single core 6 sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of masonary including 20 mm dia non-metallic PVC conduit fixed in wall including 6 sqmm copper earth continuity wire, accessories and connecting to earth dolly complete all as specified and as directed. Note : Note : 2 Run of 6 Sqmm, 1 Run of PVC conduit & 1 Run of 6 Sqmm earth cable shall be measured as single unit length

Material and labour for sub main wiring (concealed) complete with four single core 6.0 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 32 mm dia rigid non-metallic PVC conduit and conduit accessories including one single core 6.0 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surfaces complete all as specified and as directed. Note : 4 Run of 6.0 Sqmm, 1 Run of PVC conduit & 1 Run of 6.0 Sqmm earth cable shall be measured as single unit length

Supply and fixing LED light fitting 1X10W bulk head luminaires with initial flux 1100 lumen, colour temp 6500 K, colour rendering index more than 80, including LED light incluiding driver and wall mounting holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make :- Bajaj, Philips, havells

Supply and fixing AC three phase static energy meter of accuracy class 1.0, 415 V, 50 Hz with backlit LCD display of rating 10-60 A (suitable for measurement of KWH only) complete all as specified and as directed.

Supply and fixing AC single phase static energy meter of accuracy class 1.0, 240 V, 50 Hz with backlit LCD display of rating 5-30 A ( measurement and display KWH ,V,current I, KW,Pf last month history of KWH, MD in KW ) with special features like TOD , temper logging ,optical communication port display in absence of power with transparent hinge type box complete all as specified and as directed.

Supply and fixing concealed 3 phase kWH meter box of required size made out of CRCA sheet of 3mm thick powder coated body to protect from rust along with taking down old rusted meter box and making good surfaces complete all as specified and as directed .

Supply and fixing concealed single phase kWH meter box of required size made out of CRCA sheet of 3mm thick powder coated body to protect from rust along with taking down old rusted meter box and making good surfaces complete all as specified and as directed .

Supply and fixing modular cover plate with frame, of following modules complete all as specified and as directed. Note- Modular switches, sockets & Cover plates with frame shall be of same make & model.

8 Module

6 Module

3 Module

2 Module

Supply and fixing rectangular modular flush mounted sunken block of following modules suitable for mounting, modular switches & sockets, complete all as specified and as directed. Make : Anchor/ Precision/Prince/AKG

8 Module

6 Module

3 Module

2 Module

Supply fixing in repairs stepped type electronic fan regulator, white polycarbonate body, flush type, 230 V, including connections complete all as specified and as directed.

Supply and fixing in repairs Lamp holder, white Polycarbonate body, with back plate suitable for batten fittings fixed in position & connections complete all as specified and as directed.

Supply and fixing in repairs LED lamp (bulb) 9 watt capacity complete all as specified and as directed.

Supply and fixing in replacement energy efficient Surface/Wall Mounted 20W integrated LED batten 4 feet fitting with polycarbonate housing. Total system Lumen of 20W to 22W LED should be 2200 or above in Cool day Light(5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>110 Lm/w, THD(%) < 20, LED Lamp LED Lamp Efficacy>130 Lm/W with average life of 50000 Burning hours complete with all accessories as required with connections complete all as specified and as directed. Make: Havells / Philps/ Bajaj/ Crompton Greaves/ Benlo/ C&S Electric/ Polycab/

Supply and fixing in replacement energy efficient LED batten tube light, Surface/Wall Mounted 9W to 10W integrated LED 2 feet fitting with polycarbonate housing. Total system Lumen of 9W LED should be 990 or above in Cool day Light(5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>110 Lm/w, THD(%) < 20, LED Lamp, LED Lamp Efficacy>130 Lm/W with average life of 50000 Burning hours complete with all accessories as required with connections complete all as specified and as directed. Make: Havells/Philps/ Bajaj/ Crompton Greaves/ C&S Electric/ Polycab

Supply and fixing of five star rated wall mounted Geysers of capacity 25 Ltr, Electric Driven, Single phase, 240 V, Storage vertical type and heating element 2 KW, inner shell made up of copper, automatic cut off including electrical and water connections and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolts complete all as specified and as directed. Make: HAVELLS / V GAURD / USHA.

Supply and fixing in repairs PVC connections 15 MM size with PTMT nuts of length 600mm suitable for Hot & cold water complete all as specified and as directed.

Material and labour for point wiring of copper cable, multi stranded, 2.5 Sqmm size for geyser point wiring with 2.5 Sqmm size of earth conductor complete all as specified and as directed. Make-Havells/Standard/Finolex

Taking down Old unserviceable LT UG Cable of any sizes from LT pole/Panel and disconnectiong it from the existing DBs complete all as specified and as directed .

Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables etc, complete all as specified and as directed.

Supply and fixing sub class B bricks having minimum compressive strength 75 Kg/ Sqcm laid in trenches for cable protection etc. complete all as specified and as directed.

Supply, laying in trenches and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified and as directed.

Supply, laying in trenches and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and as directed.