Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹24.4 L
EMD Value
₹48,847
Closing Date
5 Feb 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Utilities) Udhampur
GE (Utilities) Udhampur PO-Garhi Pin-182121
Completion of incomplete/balance Works for Repair/Replacement to Water Filtration Beds, Clariflowculator and connected items at Tawi, Jib Filter Plant and other locations under GE (Utilities) Udhampur.
2025_MES_741803_2
GE/U-77/2025-26
Open Tender
Miscellaneous Works
Item Rate
120 days
GE (Utilities) Udhampur
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (Utilities) Udhampur
₹48,847
10 Jan 2026
10 Jan 2026
9 Feb 2026
10 Jan 2026
5 Feb 2026
17 Jan 2026
Select, Excess (+), Less (-) Less (-)
Tender Inviting Authority: GE Utilities Udhampur
Name of Work: Completion of incomplete/balance works for Repair/Replacement to Water Filtration Beds, Clariflowculator and connected items at Tawi, Jib Filter Plant and other locations under GE (Utilities) Udhampur.
Contract No: GE/U-77/2025-26
Ser. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words
Dismantling of old worn out flow controller arrangement and supply & fixing of new flow controller arrangement suitable for capacity 6 x 40,000 1x20000 Glns/hours output discharge including necessary fixing arrangement as required at site for smooth functioning of the filtration system at Tawi filter plants MH & Jib filter point, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001132 Each Job 0.0000 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
Supply and fixing of 300mm dia flat seat mushroom type valve for discharging the wash water into waste channel with extended spindle made out of 32mm MS rod operatable from working plateform including guide bracket as per site requirment and CI hand wheel including dismantling of old unserviceable flat seat mushroom valve including neceesary fixing arrangement etc. at Tawi filtration plant, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001138 Each 0.0000 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Taking out complete old filter media of following type/size capacity 6x40000,4x25000 &1x20000 gallons per hrs from bed of filteration plant and stacked at clear places out side of the filteration plant for removal from site complete including cleaning/washing of filter bed and floors with bleaching powder/chemical and removal of all dirts, silt, mud etc by using brush for filteration plant, complete all as specified and directed by Engr-in-Charge :- BI01010001010000000000000515BI0100001140 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Segregation of filter media obtained from item No.9.00 here in before by using seives analysis and stacking the same grade wise and further segregation/screening (by using machanised seiries machine) of defective and serviceable filter media manually grade wise of the following grade, complete all as specified and directed by Engr-in-Charge. :- BI01010001010000000000000515BI0100001146 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Cleaning/washing of serviceable filter media by spreading clean pressure water using compressor/pump set including acid washing and kept in the water reserviors for 24 hours miniumum for removing all scaler dirt/muds/foreign materials etc and finally wash with clear portable water of following filter media and stack seprately for reuse as per site requirement, complete all as specified and directed by Engr-in-Charge :- BI01010001010000000000000515BI0100001149 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Filter (Grit & Gravel) of size 40mm to 60mm in layers, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001153 Cum 0.0000 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Packing only carefully old serviceable filter media obtained from item No. 11.00 here in before complete all as directed of following size:- BI01010001010000000000000515BI0100001155 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Supply and packing carefully filter media 600mm in depth free from clay, dirt smooth and round/oval quartizite sand from natural source and machanised graded suitable for water filtration plant for drinking water, complete all as specified and directed by Engr-in-Charge :- BI01010001010000000000000515BI0100001158 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Note: for item No:- 07 to 13 (i) Commissioning and testing of complete filter bed 6x40000 ,,4X25000 &1x20000 GPH satisfactory in continous operation and observed defect will be redone by the contractor without any extra cost to the department, complete all as specified and directed by Engr-in-Charge. (ii) The above work is in replacement/ reuse of serviceable complete filter media of 06x40000,4X25000 & 1x20000 GPH at Tawi filteration plant MH & Jib. All items required for the same has been catered in the sch . However the contractor will visit the site before quoting and assess the requirment as majorty of items are typical in nature and required as per site conditions. Contractor will supply the items for commissioning and testing both the filteration plant as directed by GE/Engr-in-Charge. Any additional minor items required at site during execution shall be deemed to be included in the rate quoted for respective items of BOQ. (iii) The work should be first caried out in for 3x40000 GPH filter bed and will complete it duly tested and commissioned to the satisfaction of Engr-in-Charge for smooth fuctioning of water supply in this station. BI01010001010000000000000515BI0100001162 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Taking up or down GI pipe of following sizes including all fittings, complete all as specified and directed by Engr-in-Charge :- BI01010001010000000000000515BI0100001170 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Bore of pipe 40mm dia, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001171 RM 0.0000 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
S&F GI pipes (in repair) of following sizes, medium grade, galvanized with all fittings such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete, all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001172 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Note:- Wiring & testing of Motorized butterfly valve shall be carried out by authorized system integrator of the provided makes. The Engineer shall submit a letter from the OEM as proof of his being an authorized system integrator ot the OEM. The Engineer shall also submit a signed report on origiinal letter head of the OEM that wiring & testing has been carried out by him. Make of Actuator: Samson/Universal switch gear control/Emerson/Rotork/Auma Make of Butterfly: L&T/Audco/Kirloskar BI01010001010000000000000515BI0100001175 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Repair/Maintenance and replacement of defective parts of air compressor set, capacity of 25 HP. Re-greasing all grease points, tighten the nuts, bolts of air compressor set, check the all bearings and replaced with new bearing if defected the same, check tighten the 'V' belts of the set and replaced the same if defected the same and examine the compressor defective parts and replace with the new parts, complete all as specified and directed by Engr-in-Charge. BI01010001010000000000000515BI0100001179 Each Job 0.0000 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
(c) Panel indicating lamp neon/LED type (Red, Yellow & Blue) with lamp holders - 03 Nos. (d) Panel instrumental wiring with FRLS suitable size but not less than 2.5 Sqmm copper wire single core - 01 Job. INCOMING (a) MCCB 4 Pole, Ics = 100% Icu, 36 KA, 415 Volts, 63 Amps, with adjustable thermal and fixed magnetic setting - 01 No, Havells Cat No IHA13EBF0063 or equivalent as specified in list of makes. OUTGOING (a) MCCB 4 Pole, Ics = 100% Icu, 36 KA, 415 Volts, 40 Amps Thermal magnetic release-02 Nos with adjustable short circuit settings class -ll front face, isolation with positive break indication with double break contacts, extended rotary handle spreaders, phase separator conforming to IEC 60947-02 MPCB of suitable capacity Nos. Make : L&T, Legrand, schenider or equivalent. (b) Fully automatic star delta starter (ASD) suitable for 25 HP, 3 Phase, 415 Volts, IP-54, extended wide bend coil, FRLS internal wiring etc. Havells cat No- IHHASDVB* or equivalent as specified in list of makes. BI01010001010000000000000515BI0100001185 2 Construction of chamber for 100mm sluices valve item3 10 Nos
INCOMING (a) MCCB 4 Pole, Ics = 100% Icu, 36 KA, 415 Volts, 63 Amps, with adjustable thermal and fixed magnetic setting - 01 No, Havells Cat No IHA13EBF0063 or equivalent make as specified in list of makes. OUTGOING (a) MCCB 4 Pole, Ics = 100% Icu, 36 KA, 415 Volts, 40 Amps Thermal magnetic release -02 Nos with adjustable short circuit settings class -II front face, isolation with positive break indication with double break contacts, extended rotary handle spreaders, phase separator conforming to IEC 60947-02 MPCB of suitable capacity Nos. Make : L&T, Legrand, schenider or equivalent (b) Fully automatic star delta starter (ASD) suitable for 10 HP, 3 Phase, 415 Volts, IP-54, extended wide bend coil, FRLS internal wiring etc. Havells cat No- IHHASDRA* or equivelant make as specified in list of makes. (c) Fully automatic star delta starter (ASD) suitable for 15 HP, 3 Phase, 415 Volts, IP-54, extended wide bend coil, FRLS internal wiring etc. Havells cat No- IHHASDTB* or equivelant make as specified in list of makes. BI01010001010000000000000515BI0100001187 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
M&L for dry sand cushioning to underground cable provided with layer of 8cms thick before laying the cable and 15cms thick after laying and stretching the cable and punned to 18 cm thick, complete all as specified and directed by Engr-in-Charge. Note: Only punned thickness shall be measured for payment purpose. BI01010001010000000000000515BI0100001188 Cum 0.0000 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Please Enable Macros to View BoQ information
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
BOQ_837602.xls
BOQ • 0.27 MB
TENDER77.pdf
Tender Documents • 1.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .