Construction, Repair, Renovation and Development of various buildings, roads and drains including Electrical and Mechanical work in Maharaja Sriram Chandra Bhanja Deo University (MSCBU), Sriram Chandra Vihar, Takatpur, Baripada, Mayurbhanj under PM USHA

Name of Work: Construction, Repair/Renovation & Development of various buildings, roads and drains

including Electrical and Mechanical work in Maharaja Sriram Chandra Bhanja Deo University (MSCBU), Sriram

Chandra Vihar, Takatpur, Baripada, Mayurbhanj under PM USHA

Sl. No. Description of Item Schedule Amount Total Amount

Sl. No. Description of Item Schedule Amount Total Amount

1 Innovation & Incubation Centre Building

II Plumbing Works 28,56,279.40 - 28,56,279.40

IV Fire fighting Works - 6,46,153.84 6,46,153.84

2 Indigenous Knowledge & Language Building

III Internal Road 6,83,132.47 - 6,83,132.47

IV Plumbing Works 34,20,513.60 - 34,20,513.60

VI Fire Fighting Works - 7,12,003.74 7,12,003.74

3 Central Instrumentation Facility Building

II Plumbing Works 48,57,370.18 - 48,57,370.18

IV Firefighting Works - 7,96,614.46 7,96,614.46

V Air Conditioner Works - 11,79,948.08 11,79,948.08

4 Academic Building (Science Block)

II External Development 47,98,746.67 14,35,824.00 62,34,570.67

V Firefighting Works - 84,34,966.86 84,34,966.86

VI Air Conditioner Works - 1,17,96,035.20 1,17,96,035.20

VII Audio Visual System 88,49,999.29 - 88,49,999.29

5 150 SEATED BOY'S HOSTEL

II Plumbing Works 74,18,978.15 - 74,18,978.15

IV Firefighting Works - 16,69,609.14 16,69,609.14

Digitally signed by DIWAKAR

6 150 SEATED GIRL'S HOSTEL

II Plumbing Works 74,18,978.15 - 74,18,978.15

IV Firefighting Works - 16,69,609.14 16,69,609.14

7 REPAIRING AND RENOVATION

III Electrical Works 45,23,083.96 - 45,23,083.96

8 FURNITURE WORKS

B Total BoQ Amount 48,98,40,602.29

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Civil Works 0.00 0.00

Earth work in excavation of foundation trenches in hard soil

including dressing of sides and levelling the bed up to the required

depth and depositing the excavated materials away from the work

1 1 site within 50m initial lead & 1.5m initial lifts with sundries & T&P Cum 252.79 326.74 82,597.11

required for the work complete including cost of all labour,labour

cess,T&P,sundries etc. as directed by the Engineer in charge.

Filling in foundation trenches and plinth, with excavated earth

including laying the earth in layers not exceeding 23.5 cm thick

2 2 ramming & watering with all leads & lifts including cost of all Cum 169.84 181.48 30,823.24 0.00

labour,T&P completed as directed by the Engineer-in-charge.

Supplying and filling in foundation and plinth with good quality river

sand including watering, ramming with cost, conveyances,

3 3 royalties of all materials and cost of all labour with T&P required Cum 18.50 1595.71 29,520.71 0.00

for the work etc. complete as per specification & direction of

Engineer-in-charge

Providing & applying of pre constructional anti-termite treatment

by drilling 12mm dia holes at distance of 30cm @ junction of wall

& floor about 300mm apart deep enough to reach the soil below &

chemical emulsion (IMIDACHLOPRIED 30.5SC mixed with 47.5ltr

water) pumped these holes to soak the soil @ 1 ltr solution of

each hole as per manufactures specification & the holes should

be pluged the filling materials including cost of all materials,

labour,conveyance, T&P , all taxes and hire charges of

machinaries as per direction of Engineer-in-charge.

Cement concrete of proportion (1:3:6) in foundation and floors

using 4cm size clean hard black crusher broken granite stone

metal of approved quality and from approved quarry including

hoisting, lowering and laying concrete in layers not exceeding 15

5 5 cm. (6") thick to the required level ramming, watering, curing etc. Cum 46.28 8812.12 4,07,825.01 0.00

complete including cost, conveyance, royalties of all materials with

all labour and T&P required for the work etc. complete in all

respect and as per the direction of the Engineer-in-charge.

Plain cement concrete (1:2:4) using 12mm size black hard

crusher broken granite chips of approved quality from approved

quarry including hoisting, lowering and laying concrete in layers,

watering, curing etc. complete including cost, conveyance,

royalties of all materials with labour,labour cess and T&P etc.

required for the work complete as per the direction of the Engineer-

Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having

crushing strength not less than 75 kg. Per Sqr. Cm. in cement

mortar of mix (1:6) with approved grade cement and screened &

washed sand for mortar after immersing the bricks for 6 (Six)

hours in water before use in Superstructure including splays

cutting, circular moulding, corbelling, chamfering and similar such

type of works, watering and curing etc. including cost,

conveyance, loading, unloading, royalties and taxes of all

materials, cost of all labour, scaffolding, sundries, T&P required

for the works etc. complete in all respect as directed by the

Engineer-in-charge

Fly Ash brick masonry in cement mortar (1:4) in super structure

using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing

strength of not less than 75 kg./sqcm with dimensional tolerance ±

2% including splays cutting circular moulding chamfering and

corbelling and similar such type of works with all necessary

11 8 projections watering and curing after immersing the bricks in water 0.00 0.00

at least for six hours before use including cost, conveyance,

royalties and taxes of all materials with all labour,labour cess and

T & P required for the work complete in all respect as per direction

of Engineer-in-Charge.

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Providing, lifting, hoisting and laying Reinforced cement concrete

of M-25 grade as per approved designs and drawings having a

minimum compressive strength (in work test) 250 Kg. / Square

cm. in 15 cm. cubes at 28 days after mixing and test conducted in

accordance with I.S. 516 using 12 mm. to 20 mm. size black hard

crushed broken granite stone chips and screened and washed

sharp sand for mortar of approved quality from approved quarry,

washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to

be mixed in concrete mixture with Portland slag cement (PSC)

including hoisting, lowering, laying and compaction concrete by

using vibrators, watering and curing for 28 days, centering and

shuttering then after dismantling and removing debris from the

work site and finishing the exposed surface smooth providing

grooves or beads wherever necessary including cost,

conveyance, loading, unloading, royalties and taxes of all

materials and cost of all labours, sundries, T & P required of the

work etc. complete in all respect as directed by the Engineer-in-

Charge. But excluding cost and conveyance of M.S. rods or Tor

steel and binding wires and labour charges for straightening,

cutting, bending etc. of M.S. rods or tor steel tying the grills and

placing in proper position.

15 A Ground floor 0.00 0.00

17 b B) Column upto plinth Cum 4.32 20715.61 89,491.43 0.00

19 d c) Column up to ceiling level Cum 9.14 20715.61 1,89,340.66 0.00

25 B 1st floor 0.00

26 a a) Column above plinth :- Cum 9.14 23135.08 2,11,454.63 0.00

32 C Terrace floor 0.00 0.00

33 a a) Column up to ceiling level Cum 3.68 26031.15 95,794.65

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor

steel of primary steel producers such as (grade Fe-500D) etc.

including bending, binding, welding and jointing if necessary and

tying the grills and placing in position as required for R.C.C. Work

and for providing fan hooks as required, hoisting, lowering, laying

including cost, conveyances of M.S. Rod or tor steel and binding

wires of 18 to 20 gauge and labour required for the work for

bending, binding and tying the grills in all floors with labour cess

etc. (payment will be made on standard weight of B.I.S. for M.S.

Rods or tor steel only) etc. complete as per specification &

direction of Engineer-in-charge.

Providing 12 mm thick cement plaster with cement mortar of mix

(1:6) with screened and washed sharp sand for mortar and

finished smooth to the rough surface of walls in all heights after

racking out joints including watering and curing, rounding of

41 11 corners, providing grooves where ever necessary with cost, 0.00 0.00

conveyance, royalties of all materials with cost of all labour,labour

cess, T&P, and scaffolding required for the work etc. complete in

all respect as directed by the Engineer in charge.

Providing 16 mm thick cement plaster with cement mortar of mix

(1:6) with screened and washed sharp sand for mortar and

finished smooth to the rough surface of walls in all heights after

racking out joints including watering and curing, rounding of

45 12 corners, providing grooves where ever necessary with cost, 0.00 0.00

conveyance, royalties of all materials with cost of all labour,labour

cess, T&P, and scaffolding required for the work etc. complete in

all respect as directed by the Engineer in charge.

48 c Terrace Floor Sqm 35.66 355.42 12,674.13

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Providing 6 mm thick cement plaster with cement mortar of mix

(1:4) with screened and washed sharp sand for mortar and

finished smooth to R.C.C. work after closed deep chipping & slurry

treatment including watering and curing, rounding of corners,

49 13 providing grooves where ever necessary with cost, conveyance, 0.00 0.00

royalties of all materials with cost of all labour,labour cess, T&P,

and scaffolding required for the work etc. complete in all respect

as directed by the Engineer in charge.

Fixing granite tiles of approved dimension area above 0.4 sqm

(20mm thick) in floor, treads of steps and landing on 20mm thick

bed of cement mortar (1:4) jointed with neat cement slurry mixed

53 14 with pigment to match the shades of the tiles including rubbing 0.00 0.00

and polishing etc. complete with cost, conveyance, royalties and

taxes of all materials complete in all respects as per direction of

Engineer-in-Charge.

Fixing granite tiles of approved dimension area above 0.1 up to

0.4 sqm (10mm thick) in Dados, treads of steps and landing on

12mm thick cement mortar (1:3) jointed with neat cement slurry

mixed with pigment to match the shades of the tiles including

rubbing and polishing etc. complete with cost, conveyance,

royalties and taxes of all materials complete in all respects as per

direction of Engineer-in-Charge.

Providing full body matt finish vitrified tile flooring using vitrified

tiles having thickness of min 10mm conforming to IS 13755 of

1200x600 (shade to be decided as per Ama Hospital scheme)

(homogeneous) of premium quality (JOHNSON / SOMANY/

KAJARIA/ RAK) in floors, treads on steps and landings on 20mm

thick bed of cement mortar of mix (1:4) laid in proper slope and

gradient with screened and washed sharp sand for mortar and

fixing with neat white cement slurry,grouting the joints with neat

white cement slurry mixed with required quantities of pigments of

approved make to match the shades of the vitrified tile if required ,

watering and curing for 21 days, including cost, conveyance,

loading, unloading, royalties and taxes of all materials, cost of all

labour,Labour cess , sundries, T&P required for the work,

complete in all respect as per specification and direction of

Engineer-in-charge.

Providing, fitting, fixing vitrified tiles of premium grade having

thickness 8mm to 10mm confirming to IS 13756 of size 600mm x

600mm Plain (Ivory) of approved make (JOHNSON / SOMANY/

KAJARIA/ RAK) as directed by Engineer-in-charge in dados

skirting and risers of steps on 12mm thick cement plaster (1:3)

jointed with neat cement slurry mixed with pigment to match the

shades of the tiles including rubbing and polishing etc. complete

with cost, conveyance, royalties of all materials all labour,labour

cess complete in all respects.

Supplying, fitting & fixing of Chequered tiles in floors of approved

make laid on 20 mm thick cement mortar (1:4) (1 cement : 4

65 18 course sand) and filling joints with slurry including cost of all

materials, labour T&P etc required for the work all complete as per

direction of the Engineer-in-charge

66 a Ground floor Sqm 15.84 754.61 11,953.02

Supplying, fitting & fixing of 8-10 mm thick & size of 600x600

mm Anti-skid vertified floor tile of with veilcraft (VC/FT ) shield(

Scratch free/stain free) with water absorption limit between 0.08%

to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20

mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling 0.00 0.00

joints with white cement of approved quality including cost of all

materials, labour T&P etc. required for the work all complete as per

direction of the Engineer-in-charge (for New Work only )

Supplying, fitting & fixing of 600mm x 300mm Ceramic wall tiles

having thickness 6.5mm to 7.0 mm confirming to IS 13753 in

dadoes, skirting and risers of steps laid on 12 mm thick cement

mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed

70 20 with pigment to match the shades of the tiles etc. complete 0.00 0.00

including cost of all materials, labour T&P etc. required for the

work all complete as per direction of the Engineer-in-charge

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Providing and fixing seasoned sal wood work in frames at any

locations including doors, windows,cupboard, clerestory and other

frames fixing in position including cost of hinges, M.S. flat (30mm

73 21 x 6mm) hold fasts lugs or dash fasteners of required dia and

length as per drawing / specification, at all floors and all heights.

Supplying, fitting and fixing of 32mm thick flush door shutter with

approved quality of 30mm thick BWR block board pasted with

1mm thick sunmica on both side of approved design and quality

76 22 including cost of all door fittings and fixtures etc. complete in all 0.00

respect as per the direction of the Engineer-in-Charge.

Factory made single leaf rigid FRP(alternately called GRP)

sandwich composite door shutter of 32mm thick laminated with

two GRP skins with wood grain finish fabricated using UV-

stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass

Chopped Strand Mat (CSM) impregnated with orthopthalic

palyester resin. The thickness of the skins shall not be less than

3.00mm Expanded Polystyrone(EPS) structural foam panel of

29mm thickness and a density of 20kg/cu.mtr shall be used as

core material. Wooden reinforcements made of seasoned sal

wood block of cross section not less than 28mmx32mm and also

necessary sal wood reinforcements for fitting the metal fittings

such as tower bolts, aldrops, handles etc shall be provided. A

structural adhesive compatible with (EPS) foam shall be used for

bending the core material, the sal wood reiforcements and the

skins. The material and process for manufacturing the door

shutters shall conform to RV-TIFAC composites Design Centre's

standards and specifications and the door shutters tested in

conformation to IS: 4020-1998. The finish of door shutter will be

plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood

or any other colour using high quality pigments. Three heavy

whight mild steel butt hinges type-I(ISI marked) size 100mm are to

be fitted on one side of shutter with FRP frame of size 45x90mm.

Supplying and fixing of Powder coated 50-60 microns approved

colour of Aluminium 40mm Casement series Door Unit with

suitable aluminium extrude profiles. the system is designed to

accommodate 12mm clear toughened glass of make-Saint

gobain/AIS/Gardian/modi. the rate quoted inclusive of hardwares

like antilift,roller, Espag lock cum handle,epdm gaskets,T mullion

,Fly Mullion ,bottom adopter ,mid transom ,glazing clip for 12 mm

glass felt along with all accessories etc complete. the gap

82 24 between the wall and window will be filled with silicon weather 0.00

sealant in the outer side. Casement Door Outer frame - 40mm x

45.3mm Series x 1.4mm thickness, Fly mullion - 44 x 60 mm x

1.4mm thickness, T Mullion 40 x 78.4mm x 1.4mm thickness,

Transom - 40.28 x 125.8 x 1.75 mm thickness, Bottom adopter -

34.6 x 26 x 1.5mm thickness, including cost of all materials, all

labour, sundries, T&P etc. complete in all respect as per direction

of Engineer-in-Charge.

Supplying and installing UPVC- 3 track 3 shutter sliding windows

with Outer dimension - 104 x 49 sash dimension of 61mm x 39mm

for windows with corners fusion welded, fully reinforced with

Galvanized steel of 1.2 mm to 2 mm. The sash will be fitted with

5mm reflective toughened glass . The windows must be installed

complete with all kinds of ironmongery (including EPDM

gaskets,bridging wedges and glass packers) and with suitable

water draining system. Application of Silicon sealant from Inside /

Outside of Dowcorning / GE or equivalent including cost of all

materials, all labour, sundries, T&P etc. complete in all respect as

per approved drawing & direction of Engineer-in-Charge.

87 c Terrace Floor Sqm 2.97 11389.03 33,825.42

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S.

gates, garage door, collapsible gates with top and bottom rails,

steel windows, critical frames for windows, stair case and parapet

railing made out of M.S Square bar/ flat including stair case hand

railing with 40mm. dia G.I.pipe etc. including painting two coats

over a coat of redoxide primer as per approved drawing and

design with cost of all materials & labour, labour cess, T&P,

sundries etc. complete in all respect as per specification &

direction of the Engineer-in-Charge.

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

91 c Terrace Floor Kg 121.50 75.99 9,233.03

Priming one coat with wall cement primer (water bound) to make

an even finished surface in all floors and heights to wall surface of

approved make and shade including sand papering, applying

92 27 putty wherever necessary & cost of scaffolding, staging charges

with cost, conveyance, cost of all labour,labour cess T&P etc.

complete as per the direction of the Engineer-in-charge.

95 c Terrace Floor Sqm 160.38 102.19 16,388.91

Wall painting two coats with Antifungal weather coat paint (1st

quality) exterior grade of approved make & approved shade over

a coat of primer to make an even finished surface in all floors and

heights with all scaffolding and staging charges including cost,

conveyance, cost of all labours, T & P, sundries etc. as required

for the work complete in all respect as per the direction of the

Engineer-in-Charge.

99 c Terrace Floor Sqm 106.57 128.03 13,644.16

Finishing plastered surfaces of walls with cement based wall putty

(Water based) of approved make duly approved by Engineer-in-

Charge) and finishing the surface smooth and even by sand

papering to receive painting in walls, at all heights with staging

wherever necessary with cost, conveyance, cost of all

labour,labourcess, all T&P etc. required for the work complete in

all respect as per the direction of the Engineer-in-charge.

103 c Terrace Floor Sqm 160.38 100.54 16,123.96

Painting two coats with plastic emulsion paint with a approved

quality primer to make an even finished surface in all floors and

heights to wall surface of approved make and shade including

104 30 sand papering, applying putty wherever necessary & cost of

scaffolding, staging charges with cost, conveyance, cost of all

labour,labour cess, T&P etc. complete as per the direction of the

Engineer-in-charge.

107 c Terrace Floor Sqm 53.81 133.81 7,200.42

Painting two coat with approved synthetic enamel paint to new

wood work over a coat of Red oxide primer including cost,

108 31 conveyances, royalties, taxes of all materials and cost of all labour

with T&P required for the work etc. complete as per specification &

direction of Engineer in charge.

Painting two coat with approved synthetic enamel paint to new

iron work over a coat of Red oxide primer including cost,

111 32 conveyances, royalties, taxes of all materials and cost of all labour

with T&P required for the work etc. complete as per specification &

direction of Engineer in charge.

Supplying, fitting and fixing of Stainless steel of 304 grade in hand

railing using 50mm dia of 2mm thick circular pipe with Balustrade

of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless

square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in

stair case as per approved design and specification, buffing,

polishing etc with cost, conveyance, cost of all labour,labour cess,

T&P etc. required for the work complete in all respect as per

direction of the Engineer-in-charge.

Providing 2.5cm thick Grading Concrete over roof slab with

cement concrete (1:2:2) using 6mm size black hard granite

crusher broken chips and screened & washed sharp sand for

mortar and finished smooth to the rough surface of slab including

118 34 watering and curing with cost, conveyance, royalties of all

materials with cost of all labour, labour cess and T&P required for

the work etc. complete in all respect as directed by the Engineer in

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supply and Installation of System comprises of Semi unitized

extruded aluminum Structural Glazing wall panels comprising of

extruded Vertical Aluminium mullions and Horizontal transoms

(JINDAL/HINDALCO/EQUEVALENT ) with super Durable Powder

Coating finish of minimum 60 Microns confirming standards to

withstand wind pressure. The mullions and transoms are installed

on locations as indicated in the architectural drawings. The

framing members provide no structural support for the building

and the Structural Glazing wall is deemed to be a lightweight

façade which is intended to separate the external from the internal

120 35 of the building and provides natural light into the building. The

curtain wall system is designed to have internal drainage system

within the extruded sections with 6MM Blue toughened glass.

Gaskets are employed as water barrier between the aluminum

gridwork and the glazed sashframe, which are fully drained in the

event of leakage past the primary seal. The external grooves are

covered with application of backer rod with weather sealant of

approved make as indicated in the concept drawing. Fabricating

and supplying Mild Steel ( HDG coated ) Brackets to

accommodate 3 Dimensional movement for achieving perfect

verticality and proper fixing of structural glazing system with the

Supply and Installation of 14 mm GRG Tiles steppe edge ceiling

tile of size 595 x 595 x 14 mm on the edge & 7 mm in the center

having all edges encapsulated with chemical treated paint &

having densified tegular edge ,weight 5 kg/m2 having random

circular semi perforated in dual diameter / Random fissure semi

perforated in variable length which is suspended by using 0.3 mm

thick and 15 mm wide pre coated metal T 15 grid system. The

technical parameters are as follows : Core - GRG Silicate, Fire –

Class 1 & P , Acoustics – NRC 0.5,Climate (degree C, RH) – 50,

99, STC - 30, Termite resistance ,Light reflectance – 85 %,Green

(RC %) – 25, Hygiene (VoC, Clean room) – Low, , Load capacity

(Kg) - Antisag. The T 15 Grid system of 600 x 600 mm module

shall include wall angle(WA 15) with unequal flanges of size 14 x

20 x 3000 mm wide, length 3000 mm, 0.43 mm thick fixed along

the perimeter of wall with the help of nylon sleeves and suitable

fasteners at 300 mm centers. Then suspend the Main T15 (MT15

W36) having flange width 15 mm /24 mm , height 32/38 mm and

length 3600 mm thickness 0.30 mm from the soffit with help of

soffit cleat and wire at 1200 mm c/c. Cross T15 (CT15 W12) with

flange width 15 mm, height 32 mm and length 1200 mm is then

interlocked into the pre-cut slots in the Main T15 at 600 mm

centers in the direction perpendicular to the Main T15. Finally,

Cross T15 (CT15 W06) having flange width 15 mm, height 32 mm

and length 600 mm are then interlocked into the pre cut slots in

the 1200 mm Cross T15 at 1200 mm centers and in direction

parallel to the Main T15. GRG Tile of size 595 x 595 x 14 mm thick

shall be placed into the grid size of 600 x 600 mm. Ensure arrow

marks behind panels are oriented in one direction to achieve

uniform shade. Test certificate will be submitted after procurement

Waterproofing application:- Providing and application of two

component polymer modified flexible cementitious waterproofing

coating at a thickness of 1.5 -2.5 mm The membrane should have

Elongation equal or more than: 30%

Crack Bridging ability : Up to 1 mm

Adhesive strength: 1.0 N/mm² @ 28d

126 37 Tensile elongation: 60% @ 20°C 0.00

Shore A Hardness >85 (between 3 - 7 days)

etc. as per direction of E.I.C (For longer span, in terrace panel of

4m*4m should be done by groove cutting, and filling with PU

128 Sub-Total of Civil Works 87,67,576.43 23,78,723.70

129 Plumbing Works

130 INTERNAL PH WORK-SUPPLY & DRAINAGE PIPING & FITTINGS

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supplying, installing, fixing, jointing, testing and commissioning of

approved make. Chlorinated Polyvinyl Chloride pipes (CPVC)

SDR.11 pipes confirming to ASTM standards with necessary

fittings for inetrnal toilet water supply upto 50 dia , and above

50mm dia pipe schedule 80 with fitting shall be schedule 80

ASTM IPS. The fittings and specials such as tees,

elbows,couplers, bends, enlargers etc.,m with CPVC brass

threaded combination / transition specials such as male adapters

brass threaded female adapters, brass FPT Tee, Brass FPT

elbow etc., where connection with metal is to be made including

necessary drilling holes, chasing walls and making the same good

in cement martor 1:1 restore the same original condition neately

as directed by the Engineer in-charge. Joints to be made with

CPVC solvent cement up to 50mm dia as per ASTM D-2846 and

above 50mm dia primer P-70, and solvent confirming to ASTM F-

4931 / 724 All exposed pipe shall be painted with latex paint. (for

shafts, basement ceiling ringmain Terrace & PRM).The rate shall

include necessary GI supports, GI grip bolts, angle brackets,

hangers, supports as with suitable GI U-clamps, bolts, nuts and

washers etc., The clamps shall be painted with two coats of

enamel (approved) paint over a coat of primer etc., complete

Providing all materials, labour, T&P for fitting & fixing of following

CPVC Ball Valves(CTS Sockets) confirming to IS-15778 with ISI

mark as per ASTM D-2846 in all floor & fixing with the pipes after

cutting the pipes to required shape & size including wastage etc.

of following nominal diameter, all complete including testing the

139 2 joints with required water pressure.The cost inclusive of 0.00 0.00

transportation scaffolding etc. all complete as per specification

excluding GST and direction of Engineer-in-charge

140 a 25 mm dia CPVC ball valve Each 10.000 637.78 6,377.76 0.00

141 b 32 mm dia CPVC ball valve Each 5.000 816.78 4,083.92 0.00

Supplying, installing, testing and commissioning butterfly valves

with standard lever confirming to IS 13039 with necessary

142 3 connecting fittings like flanges ,nuts and bolts etc., complete. 65 Each 4,796.35 0.00

143 B DRAINAGE PIPE

Supplying all materials, labour, T&P and cutting holes through

existing brick work including making good the damages in cement

mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and

fittings etc. all complete as per P.H. specification and direction of

Engineer-in-charge. 250 mm thick wall

Supplying all materials, labour, T&P and cutting hole in R.C.C

floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C

pipes and fittings etc and repairing the holes after insertion of

pipes etc with cement concrete (1:2:4 ) including finishing

complete so as to make it leak proof as per direction of the

Engineer-in-charge. Each 22.000 269.87

Supplying, fitting and Outing of PVC pipes as per

(IS:4985-2000) with heavy duty solvent cement (manufacture's

made) joint for basin and sink waste Class-3 (6 kg/sqcm) with

necessary fittings like bends, tees, reducers, sockets etc. &

146 3 specials viz. MS clamp as per design, screws with washer

includuing cutting holes in floor & walls & making good the

same, cutting chases & filling the same with PCC (1:2:4) & then

cement morter (1:6).

Supplying, fixing and testing PVC soil, waste, Rain and vent pipes

(SWR) supreme confirming to IS13592 : 2013, type B with rubber

ring/Solvent (confirming toIS5382) joint inclusive of allnecessary

specials like bends, tees,offsets, door bends, junctions, cowls,

etc.,laid underfloor/ fixed on walls,and in pipe shafts etc.,

complete.The rate shall include necessary GI supports, GI grip

bolts, angle brackets, hangers, supports as with suitable GI U-

clamps, bolts, nuts and washers etc., The clamps shall be painted

with two coats of enamel (approved) paint over a coat of primer

etc., complete.

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Providing ,fixing , testing and commissioning of approved make

152 5 PVC vent cowl with necessary accessories etc., complete. 5.000 180.07 900.34

SANITARY FIXTURES.

Supplying all materials, labour, T&P and fixing the following

vitreous china Wash Down Water Closet (European type W.C.

pan) of Hindware/Jaquar/Parryware with integral 'p' or 's' trap to

the floor with wooden plug and chromium plated pedestal screws

including jointing the trap with soil pipe in cement mortar (1:1)

fixing plastic seat and cover for wash down water closet with

chromium plated brass hinges and rubber buffers including

polishing etc all complete as per specification and direction of the

Engineer-In-Charge. (EWC with Wall Hung Cistern, Drainage L

Bend Pipe, Gasket and Installation Kit with PP normal close seat

cover, Hinges, Fixing Accesso

Supplying all materials, labour, T&P and fixing Health Faucet of

Hindware/Jaquar/Parryware complete with Chromium plated brass

155 2 brackets fixed to wooden plugs with Chromium plated brass screws 31,300.68 0.00

as per specification and direction of the Engineer-In-Charge.

Supplying all materials, labour, T&P and fixing standard sized Two

way Bib cock of Hindware/Jaquar/Parryware of approved make

etc complete including cutting the wall and making good the

156 3 damages, including cost of all materials complete as per PH 32,992.80

specification complete as per direction of Er-in-charge. 15mm dia

CP Two way bib cock with Flange.

Supplying all materials, labour, T&P and fixing standard sized

Long way body bib cock of Hindware/Jaquar/Parryware of

approved make etc complete including cutting the wall and making

157 4 good the damages, including cost of all materials complete as per 4,630.08

PH specification complete as per direction of Er-in-charge. 15mm

dia CP Two way bib cock with Flange.

Supplying all materials, labour, T&P and fixing standard sized

concealed stop cock of Hindware/Jaquar/Parryware of approved

make etc complete including cutting the wall and making good the

158 5 damages, including cost of all materials complete as per PH 3,396.75

specification complete as per direction of Er-in-charge. 15mm dia

CP Two way bib cock with Flange.

Supplying all materials, labour, T&P and fixing standard sized

Chromium Plated brass Towel Rail complete with Chromium

159 6 Plated brass brackets fixed to wooden plugs with Chromium

Plated brass screws as per specification and direction of the

Engineer in charge

161 b C.P. Soap Dish holder. Each 12.000 1439.84 17,278.03

Supplying all materials, labour, T&P and fixing standard sized

162 7 Robe Hook of Hindware/Jaquar/Parryware complete with all as 11,095.37

per specification and direction of the Engineer in charge. Each 12.000 924.61

Supplying all materials, labour T&P and fixing of Under Counter

wash basins of Hindware/Jaquar/Parryware of approved make in

all floor of approved quality including cutting the walls & floor and

163 8 making good the damags with cement concrete e.t.c including all 75,076.32

tsxes,duties,transportation e.t.c. All complete as per specification

and direction of the Engineer-In-Charge.

Supplying all materials, labour T&P and fixing of Waste coupling

164 9 32 mm size Half thread with 80mm height (Half Threaded) 8,745.22

Supplying all materials, labour, T&P and fixing mirror of superior

glass mounted on 6mm thick A.C.sheet or plywood sheet and

fixed to wooden plugs with CP screws and washers complete as

per specification and direction of the Engineer-in-charge.

600mmx450mm size B.E.mirror (Alpina/Golden fish/Belgion)

Supplying all materials, labour, T&P and fixing standard sized

pillar cock of Hindware/Jaquar/Parryware of approved make etc

complete including cutting the wall and making good the

damages, including cost of all materials complete as per PH

specification and direction of Engineering-in-charge. 15mm dia fus

Jaquar,Cat No- PRS-031 Each 12.000 2197.16

Supplying all materials, labour, T&P and fixing standard sized

Chromium Plated soap dispenser Hindware/Jaquar/Parryware

complete with Chromium Plated brass brackets fixed to wooden

plugs with Chromium Plated brass screws as per specification

and direction of the Engineer in charge. soap dispenser jaquar

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supplying all materials, labour, T&P and fixing standard sized

15mm dia angular Stop cock of Hindware/Jaquar/Parryware of

approved make etc complete including cutting the wall and

168 13 making good the damages, including cost of all materials 35,315.04

complete as per PH specification complete as per direction of Er-

in-charge. 15mm dia CP angle stop cock with wall flange

.jaquar,Cat No-CQT-23059 Each 24.000 1471.46

Matrix Set-1 (Wash Basin 46x36 cm with one pair mounting

169 14 brackets, EWC & cistern complete with fittings & seat cover, one 1,53,093.20

no hinged rail 76 cm and 4 nos of grab rail 60cm) Each 2.000 76546.60

Overhead shower 120 mm Round shape Multi Flow (ABS Body)

170 15 chrome plated with Gray Face Plate)with Rubit Cleaning System. 6,121.84

(As per Cat no.OHS-1789 of Jaquar). Each 2.000 3060.92

171 16 15 mm dia C.P revolving shower with arm Each 2.000 1909.24 3,818.48

Supplying and installing ARISTO Plastic Dustbin Black 120 L with

172 17 Lid & Wheel, weight-7.5kg,Size (HxWxD-980x490x550mm), 10,924.44

Supplying, fixing and testing PVC muilty floor trap without SS

frame and cover 75mm dia outlet fixed on a bed of cement

173 18 concrete with (Heavy duty type) etc., complete. 913.32 0.00

Supplying, fixing and testing PVC Nahani floor trap without SS

174 19 frame and cover 75mm dia outlet fixed on a bed of cement 3,274.50

concrete with (Heavy duty type) etc., complete. Each 15.000 218.30

Supplying, fixing SS floor trap grating .

Providing and fixing stainless Single bowl kitchen sink stainless

steel Bowl Size- 540mm X 410mm, Depth-230mm (Cera, Cat no.-

B4711501) with C.I. brackets and stainless steel plug 40 mm,

including painting of fittings and brackets, cutting and making

176 21 good the walls wherever required : 0.00 0.00

Supplying, Installing, Testing and Commissioning Sink Cock With Each

Extended Swinging Spout including CP wall flanges, connectors,

adapters and all other fittings/ accessories required for

177 22 satisfactory installation complete. 0.00 2760.02 0.00 0.00

EXTERNAL P.H. & SANITARY WORK.

Supplying, fixing and testing PVC soil, waste, Rain and vent pipes

(SWR) supreme confirming to IS13592 : 2013, type B with rubber

ring/Solvent (confirming toIS5382) joint inclusive of allnecessary

specials like bends, tees,offsets, door bends, junctions, cowls,

etc.,laid underfloor/ fixed on walls,and in pipe shafts etc.,

complete.The rate shall include necessary GI supports, GI grip

180 a bolts,mm

. hangers, supports as with suitable GI U- mtr 65.00 967.84 62,909.34 0.00

Earthwork in excavation in all types of soil for 200mm dia site

leveling, and forming the bottom surface foundation, pits, trenches

and other civil works upto and including 1.5metre depth and

stacking the soil upto a lead of 100 metre and including

dewatering, removing slush, shoring and strutting (as required),

complete as per specification and as directed by the Engineer-In-

Supplying all materials, labour, T & P and constructing Gully Trap

chamber of the following inside size with 8 cm thick R.C.C. precast

cover slab in CC (1:2:4) mix using 12mm size h.g. chips,

foundation concrete (1:4:8) using 40mm size h.g. metal on bed

aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside

183 3 12mm thick cement plastering (1:3) finished with a floating coat of 8.00 2220.05 17,760.42 0.00

neat cement including fixing 100mm x100mm size gully trap,

150mm x150mm C.I gratig etc. all complete as per aproved

drawing, specification and direction of Engineer-in-charge.

Supplying all materials, labour, T & P and constructing of

Inspection chamber of the following inside size with 8 cm thick

R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g.

chips, foundation concrete (1:4:8) using 40mm size h.g. metal on

bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside

12mm thick cement plastering (1:3) finished with a floating coat of

neat cement including fixing 100mm x100mm size gully trap,

150mm x150mm C.I gratig etc. all complete as per aproved

drawing, specification and direction of Engineer-in-charge.

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

OPEN WELL SUBMERSIBLE PUMPS FOR DOMESTIC WATER

TRANSFER FROM UGR TO OHR

Supply, installation, testing and commissioning Open well

submersible pump of required drive (Motor HP), having

discharge capacity and pumping head as described below with all

electrical accessories viz.main switch and starter, auto on/off

system with float arm (with fixed or flexible arm), over load

protection relay, power cable and control cable from main switch

and starter with auto on-off with dry running protection to

respective motors, earthing having required M.S. galvanised

supporting stay/ clamp etc. complete operational.

DOMESTIC 0.00 0.00

No. of Pumps : 1 working +1 stand by

RPM : 2900 (LOCATED AT UGR ).

192 B 10 KLD DOMESTIC WATER UGR TANK AND PUMP HOUSE

Earthwork in excavation in hard soil for site leveling, foundation,

pits, trenches and other civil works upto and including 1.5metre

193 1 lift and stacking the soil upto a lead of 100 metre and including

dewatering, removing slush, shoring and strutting (as required),

complete as per specification and as directed by the Engineer-In-

195 b All kind of soil CUM 23.53 359.78 8,465.67

Filling in foundation trenches and plinth, with excavated earth

including laying the earth in layers not exceeding 23.5 cm thick

196 2 ramming & watering with all leads & lifts including cost of all 16.09 181.48 2,920.08

labour,T&P completed as directed by the Engineer-in-charge.

Supplying and filling sand in foundation and over areas including CUM

watering, ramming, consolidating and dressing, labours, tools,

taxes etc. all complete as per the specification and direction of

Engineer-In-Charge.

Providing and laying plain cement concrete 1:3:6 (1 cement: 3 CUM

sand: 6 stone agregate 40mm nominal size) as levelling course

in foundation and plinth etc. including tempering, curring

,shuttering etc.complete all depth and height.

Providing, lifting, hoisting and laying Reinforced cement concrete

of M-25 grade as per approved designs and drawings having a

minimum compressive strength (in work test) 250 Kg. / Square

cm. in 15 cm. cubes at 28 days after mixing and test conducted in

accordance with I.S. 516 using 12 mm. to 20 mm. size black hard

crushed broken granite stone chips and screened and washed

sharp sand for mortar of approved quality from approved quarry,

washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to

be mixed in concrete mixture with Portland slag cement (PSC)

including hoisting, lowering, laying and compaction concrete by

using vibrators, watering and curing for 28 days, centering and

shuttering then after dismantling and removing debris from the

work site and finishing the exposed surface smooth providing

grooves or beads wherever necessary including cost,

conveyance, loading, unloading, royalties and taxes of all

materials and cost of all labours, sundries, T & P required of the

work etc. complete in all respect as directed by the Engineer-in-

Charge. But excluding cost and conveyance of M.S. rods or Tor

steel and binding wires and labour charges for straightening,

cutting, bending etc. of M.S. rods or tor steel tying the grills and

placing in proper position.

Cutting, straightening coiled or bent up M.S. Rod or tor steel of

SAIL/ TATA / RINL (VIZAG) make including bending, binding,

welding and joining if necessary and tying the grills and placing in

position as required for R.C.C. Work and for providing fan hooks

as required, hoisting, lowering, laying including cost,

conveyances, taxes of M.S. Rod or tor steel and binding wires of

18 to 20 gauge and labour required for the work for bending,

binding and tying the grills in all floors (Linear measurement will be

taken and quantity will be calculated basing on the standard

weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any,

including weight of binding wire will not be considered for

measurement) etc. complete as per specification & direction of

Engineer-in-charge.

Providing & applying SikaTop seal 109 hi, Two Component Acrlic SQM

Cementations waterproofing coating over the injected & prepared

surface @ 2.2 Kg/sqm in two coats at the dry areas as per the site

condition. Lose Plaster to be removed up to the mother substrate

present if any in retaining wall prior to the application of

waterproofing coating.

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

12mm cement plaster on external RCC/brick surfaces in cement SQM

mortar 1:4 (1 cement : 4 coarse sand) with a floating coat of neat

cement punning including necessary scaffolding, curing etc. all

complete at all floors and all heights.

Supplying all materials labour, T&P and fitting and fixing RCPC Each

206 9 Cover all compete as per specification and direction of the 2.00 1847.29 3,694.58

Engineer in charge.

RCC Over head water storage tank Domestic-5KLD & Fire 5

207 C kld Capacity 0.00

Providing, lifting, hoisting and laying Reinforced cement concrete

of M-25 grade as per approved designs and drawings having a

minimum compressive strength (in work test) 250 Kg. / Square

cm. in 15 cm. cubes at 28 days after mixing and test conducted in

accordance with I.S. 516 using 12 mm. to 20 mm. size black hard

crushed broken granite stone chips and screened and washed

sharp sand for mortar of approved quality from approved quarry,

washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to

be mixed in concrete mixture with Portland slag cement (PSC)

including hoisting, lowering, laying and compaction concrete by

using vibrators, watering and curing for 28 days, centering and

shuttering then after dismantling and removing debris from the

work site and finishing the exposed surface smooth providing

grooves or beads wherever necessary including cost,

conveyance, loading, unloading, royalties and taxes of all

materials and cost of all labours, sundries, T & P required of the

work etc. complete in all respect as directed by the Engineer-in-

Charge. But excluding cost and conveyance of M.S. rods or Tor

steel and binding wires and labour charges for straightening,

cutting, bending etc. of M.S. rods or tor steel tying the grills and

placing in proper position.

Cutting, straightening coiled or bent up M.S. Rod or tor steel of

SAIL/ TATA / RINL (VIZAG) make including bending, binding,

welding and joining if necessary and tying the grills and placing in

position as required for R.C.C. Work and for providing fan hooks as

required, hoisting, lowering, laying including cost, conveyances,

taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge

and labour required for the work for bending, binding and tying

213 2 the grills in all floors (Linear measurement will be taken and QTL 13.22 10682.42 1,41,221.62

quantity will be calculated basing on the standard weight of B.I.S.

for M.S. Rods or tor steel only. Wastage if any, including weight of

binding wire will not be considered for measurement) etc.

complete as per specification & direction of Engineer-in-charge.

12mm cement plaster to out side of brick surfaces with cement SQM

mortar of mix 1:6 (1 cement : 6 fine sand) including necessary

scaffolding, curing etc. all complete at all floors and all heights.

12mm cement plaster on external RCC/brick surfaces in cement SQM

mortar 1:4 (1 cement : 4 coarse sand) with a floating coat of neat

215 4 cement punning including necessary scaffolding, curing etc. all 36.16 280.84 10,155.17

complete at all floors and all heights.

Priming one coat with wall cement primer (water bound) to make sqm

an even finished surface in all floors and heights to wall surface of

approved make and shade including sand papering, applying putty

wherever necessary & cost of scaffolding, staging charges with

cost, conveyance, taxes of all materials, cost of all labour,labour

cess T&P etc. complete as per the direction of the Engineer-in-

Painting two coats with approved anti-fungal weather seal paints sqm

(ISI) of approved colour, shade on wall surface over a coat of wall

primer(ISI) water bound including sand papering, polishing the

217 6 surface, cost, conveyances of all materials and cost of all 30.54 128.03 3,910.04

labour,labour cess with T&P etc, complete as per specification &

direction of Engineer-in-charge.

2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & sqm

218 7 down grades size hard granite crusher broken chips on new work 16.16 598.38 9,669.79

in Terrace Floor

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

219 D SEPTIC TANK

Earth work in excavation of foundation in all kinds of soil within Cum

50m initial lead and 1.5m initial lift including rough dressing &

220 1 breaking clods to maximum 5cm to 7cm and laying in layers not 24.71 359.78 8,890.21

exceeding 0.30m in depth and as per direction of the Engineer-in-

Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr Cum

221 2 in all kinds of embankments and road works and ordinary 4.94 383.38 1,893.91

earthwork in general. 1x6.10x2.70x0.30

Excavation of foundation in laterite rock or any hard rock (other Cum

than granite or disintegrated rock) removed by chiselling including

dressing and levelling the bed not exceeding 1.50 mtr. in depth

and depositing the soil within initial lead of 50 mtr. and as per

specification approved by the Department.

Supplying all materials, labour, T&P and filling in foundation and Cum

plinth with sand well watered and rammed including conveyance

223 4 of all materials to worksite, payment of royalty, taxes etc.all 3.29 1595.71 5,249.90

complete as per direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing cement Cum

concrete (1:3:6) with 4cm size hard granite metal including

224 5 watering, curing, conveyance of all materials to worksite, payment 3.29 8812.12 28,991.88

of royalty, taxes etc all complete as per specification and direction

of the Engineer in charge

Supplying all materials, labour, T&P and providing 6mm thick Sqm

cement plaster (1:4) on RCC work including watering, curing,

225 6 conveyance of all materials to worksite, payment of royalty, taxes 39.68 257.95 10,235.38

etc all complete as per specification and direction of the Engineer

Supplying all materials, labour, T&P and providing cement punning Sqm

including watering, curing, conveyance of all materials to worksite,

226 7 payment of royalty, taxes etc all complete as per specification and 44.96 48.38 2,175.16

direction of the Engineer in charge

Supplying all materials, labour, T&P and providing rigid and

smooth centering and shuttering for R.C.C works including false

work and dismantling them after casting including conveyance of

all materials to worksite, payment of royalty, taxes etc all

complete as per specification and direction of the Engineer in

228 a R.C.C floor and roof slabs up to 4.30m height 10.05 899.28 9,037.74

229 b R.C.C beams,columns,girder and bressmer etc. 1,00,117.08

Supplying all materials, labour, T&P and providing M.S Qntl

reinforcement for R.C.C work including cutting, bending, binding,

and tying the grills and placing in position including cost of binding

230 9 wire 18 to 20 gauge, conveyance of all materials to worksite, 14.25 10601.47 1,51,071.00

payment of royalty, taxes etc all complete as per specification and

direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement Cum

concrete (1:1:2) with 12mm size hard broken granite chips for

R.C.C works including hoisting, laying, watering, curing,

conveyance of all materials to worksite, payment of royalty, taxes

etc all complete as per specification and direction of the Engineer

Supplying all materials, labour, T&P and providing cement

concrete (1:2:4) with 12mm size hard broken granite chips

including watering, curing, conveyance of all materials to worksite,

payment of royalty, taxes etc all complete as per specification and

direction of the Engineer in charge

Supplying all materials, labour, T&P and providing 12mm thick Sqm

cement plaster (1:4) on brickwork including watering, curing,

233 12 conveyance of all materials to worksite, payment of royalty, taxes 5.28 257.95 1,361.97

etc all complete as per specification and direction of the Engineer

Supplying all materials, labour, T&P and providing brick work with Cum

Fly ash bricks having crushing strength not less than 75kg/cm² with

dimensional tolerance ± 8 percent in cement mortar (1:4)

234 13 including watering, curing, conveyance of all materials to worksite, 0.60 7066.08 4,239.65

payment of royalty, taxes etc all complete as per specification and

direction of the Engineer in charge

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supplying all materials, labour, T&P and making MS step iron in Each

20mm diameter MS steel bars and fixing into walls of man

235 14 hole/septic tank duly embedded in cement concrete (1:3:6) 6.00 333.70 2,002.22

complete as per specification and direction of the Engineer in

Filling in foundation and plinth with excavated materials, moorum Cum

236 15 including watering and ramming as directed by the Engineer in 9.84 177.59 1,747.49

Supplying all materials, labour,T&P and providing 25mm thick Sqm

grading concrete (1:2:2) on roof slab with 6mm size hard granite

chips on new work including watering, curing, conveyance of all

materials to worksite, payment of royalty, taxes etc all complete

as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing shoring and Sqm

shuttering foundation trenches, pits etc with close wooden planks

or sheets shuttering etc all complete as per direction of the

Engineer in charge.

239 18 Dewatering with 5 H.P diesel engine pump during excavation per hour 30.00 69.62 2,088.60

Supplying all materials, labour, T&P and providing, fitting and Each

fixing U-PVC SWR Tee in wall including filling the recess with

cement concrete (1:3:6) with 12mm size h.g chips all complete

including watering, curing, conveyance of all materials to worksite,

payment of royalty all complete as per specification and direction

of the Engineer in charge

160mm U-PVC plain Tee

Supplying all materials, labour, T&P and constructing vent base as each

per P.H.D specification etc all complete.

Supplying all materials, labour, T&P and fitting and fixing U-PVC

SWR soil waste ventilating pipes and fittings of the following

outside diameter conforming to ISI No 13592/1992 to walls with

nails, bobbins and wooden plugs or laying in trenches including

jointing with supply of approved rubber lubricant by non-heat

application method/as per manufacturer's specification, testing,

earthwork in excavation in all kinds of soil and refilling of trenches

as per specification and direction of the engineer in charge.

243 a 110mm diameter U-PVC SWR pipes Mtr 2.20 585.63 1,288.39

244 b 110mm U-PVC cowl Each 1.00 68.68 68.68

245 E SOAK PIT 0.00

Earthwork in excavation in all types of soil for site leveling,

foundation, pits, trenches and other civil works upto and including

1.5metre lift and stacking the soil upto a lead of 100 metre and

including dewatering, removing slush,shoring and strutting (as

required), complete as per specification and as directed by the

Engineer-In-Charge.

247 a All type of Soil Cum 26.01 326.74 8,498.56

Filling at all depth with available excavated earth (excluding rock) Cum

in trenches, plinth, sides of foundations etc. in layers not

249 2 exceeding 15cm in depth: consolidating each deposited layer by 12.59 181.48 2,284.88

ramming and watering complete (lead upto 100m) as directed by

the Engineer-In-charge.

Supplying of filling sand in foundation and over areas including Cum

watering,ramming, consolidating and dressing, labours, tools,

taxes etc., all complete as per the specification and direction of

Providing and laying plain cement concrete 1:3:6 (1 cement: 3 Cum

sand: 6 stone agregate 40mm nominal size) as levelling course

in foundation and plinth etc. including tempering, curring

,shuttering etc.complete all depth and height.

Brick work with Fly Ash. Bricks in cement mortar (1:6) in Cum

foundation having crushing strength not less than 75.00 kg/cm2

immerging the bricks in water not less than six hours before use in

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Providing, lifting, hoisting and laying Reinforced cement concrete

of M-250 grade as per approved designs and drawings having a

minimum compressive strength (in work test) 250 Kg. / Square

cm. in 15 cm. cubes at 28 days after mixing and test conducted in

accordance with I.S. 516 using 12 mm. to 20 mm. size black hard

crushed broken granite stone chips and screened and washed

sharp sand for mortar of approved quality from approved quarry,

washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to

be mixed in concrete mixture with Portland slag cement (PSC)

including hoisting, lowering, laying and compaction concrete by

using vibrators, watering and curing for 28 days, centering and

shuttering then after dismantling and removing debris from the

work site and finishing the exposed surface smooth providing

grooves or beads wherever necessary including cost,

conveyance, loading, unloading, royalties and taxes of all

materials and cost of all labours, sundries, T & P required of the

work etc. complete in all respect as directed by the Engineer-in-

Charge. But excluding cost and conveyance of M.S. rods or Tor

steel and binding wires and labour charges for straightening,

cutting, bending etc. of M.S. rods or tor steel tying the grills and

placing in proper position.

Supplying, straightening, cutting, bending, placing in position and Qntl

binding reinforcement steel work in RCC/reinforced brick works as

per drawing and specification including preparation of respective

255 7 bar bending schedule and binding ( Binding wire to be used as per 1.00 10601.47 10,601.47

the IS code) etc. all complete as per direction of Engineer-in-

charge.Cold Twisted bars,

256 Sub-Total of Plumbing Works 28,56,279.40

257 Electrical Works

258 INTERNAL ELECTRICAL

259 Sub-Head I (modular Wiring Items)

Recessed wirring to light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq.mm FRLS PVC insulated copper conductor

of ISI marked with 20 mm dia HMS FRLS PVC conduit ISI

marked 6A modular type switch ISI marked (vision) and ceiling

rose ISI marked of modular type G.I box with metallic cover plate

(both side) Panasonic (vision) of suitable size, modular box with

1.5 sq. Mm FRLS PVC insulated single core multistandard copper

260 1 conductor as earth wire including all accessories and connection 0.00 0.00

as per direction of Engineer -in -Charge. . All the switches &

sockets should be warrantied for a replacement period of 2 years

against defects with ncessary test report & Warrnaty certificate to

be submitted to the department for genuinity of product & to avail

free after sales service within warranty period for acceptance of

Supplying ,fixing of 6A Plug on the same board in existing switch

board with complete fitting by 01 no of 6A switch & socket

(modular type)( (flame retradant type)) & other required

accessories of ISI marked as approved as per direction of Engg. -

in -Charge. .(Maximum 02 nos point in one circuit).All the

264 2 switches & sockets should be warrantied for a replacement period 15 231.28 3,469.20 0.00

of 2 years against defects with ncessary test report & Warrnaty

certificate to be submitted to the department for genuinity of

product & to avail free aftersales service within warranty period for

acceptance of materials.

Supplying,fixing of 6A Plug on the separate board with complete

fitting by 01 no of 6A switch & socket(modular type)( (flame

retradant type)) with suitable size modular box & cover( flame

retradant type) including supplying of all required accessories of

ISI marked as approved as per direction of engg-in-charge.)

.(Maximum 02 nos point in one circuit).All the switches & sockets

265 3 should be warrantied for a period of 2 years against 15 650.18 9,752.70 0.00

manufacturing defects against which ncessary test report &

Warrnaty certificate to be submitted to the department for

genuinity of product & to avail free aftersales service within

warranty period for acceptance of materials.

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supplying,fixing of 1x16A Plug on the separate board with

complete fitting by 01 no of 16A switch & socket(modular

type)((flame retradant type)) with suitable size modular box &

cover(flame retradant type) including supplying of all required

accessories of ISI marked as approved as per direction of engg-

in-charge.. (For equipement power)All the switches & sockets

should be warrantied for a replacement period of 2 years against

defects with ncessary test report & Warrnaty certificate to be

submitted to the department for genuinity of product & to avail free

aftersales service within warranty period for acceptance of

Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete

fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( (flame retradant

type) with suitable size modular box & metallic cover plate (both side)( flame

retradant type)including supplying of all required accessories of ISI marked as

approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand(

Myrius)/Panasonic (vision) (For equipement power)(Maximum 02 nos point in

one circuit).All the switches & sockets should be warrantied for a replacement

period of 2 years against defects with ncessary test report & Warrnaty

certificate to be submitted to the department for genuinity of product & to avail

free aftersales service within warranty period for acceptance of materials.

Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with

complete fitting by 01 no of 16A+3 nos 6A switch &

socket(modular type) ( (flame retradant type) with suitable size

modular box & metallic cover plate (both side)( flame retradant

type)including supplying of all required accessories of ISI marked

as approved as per direction of engg-in-charge. Make-Schneider

(Zencelo)/ legrand( ( Myrius)) /Panasonic (vision) (For equipement

power). (Maximum 02 nos point in one circuit).All the switches &

sockets should be warrantied for a replacement period of 2 years

against defects with ncessary test report & Warrnaty certificate to

be submitted to the department for genuinity of product & to avail

free after sales service within warranty period for acceptance of Nos

Recessed wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

core cable in recessed HMS FRLS PVC conduit of

mentioned size l as required as per direction of Engg.-in-Charge.

269 7 2 nos single core 1.5 sq. mm copper wire for phase and neutral Mtr 200 187.62 37,524.00

and 01 no of single core 1.5 sq. mm copper wire for earth

continuty conductor. In 20 mm dia non metallic heavy duty

conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

Recessed wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

core cable in recessed HMS FRLS PVC conduit of

mentioned size as required as per direction of Engg.-in-Charge.

2 nos single core 2.5 sq. mm copper wire for phase and neutral

270 8 and 01 no of single core 1.5 sq. mm copper wire for earth Mtr 300 204.14 61,242.00

continuty conductor in 20 mm dia non metallic heavy duty

conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT )

Recessed wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

core cable in recessed HMS FRLS PVC conduit of

mentioned size as required as per direction of Engg.-in-

271 9 2 nos single core 4 sq. mm copper wire for phase and neutral and Mtr 200 225.38 45,076.00

01 no of single core 1.5 sq. mm copper wire for earth continuty

conductor in 20 mm dia non metallic heavy duty conduit .(PDB to

PSB/ POWER POINT/AC POINT) (2X4+1X1.5)

Recessed wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

core cable I in recessed HMS FRLS PVC conduit of

mentioned size l as required as per direction of Engg.-in-

272 10 2 nos single core 6 sq. mm copper wire for phase and neutral and Mtr 30 261.96 7,858.80

01 no of single core 2.5 sq. mm copper wire for earth continuty

conductor in 25 mm dia non metallic heavy duty conduit .(LFDB

TO LBDB/UBDB) (2X6+1X2.5)

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Recessed wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

core cable in recessed HMS FRLS PVC conduit of

mentioned size as required as per direction of Engg.-in-Charge.

4 nos single core 6 sq. mm copper wire for phase and neutral and

02 nos of single core 4 sq. mm copper wire for earth continuty

conductor in 32 mm dia non metallic heavy duty conduit.(LFDB

TO LBDB/Medical equipement) (4X6+2X4)

Recessed wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

core cable in recessed HMS FRLS PVC conduit of

mentioned size as required as per direction of Engg.-in-Charge.

4 nos single core 10 sq. mm copper wire for phase and neutral

274 12 and 02 nos of single core 6 sq. mm copper wire for earth continuty Mtr 35 526.28 18,419.80

conductorin 32 mm dia non metallic heavy duty conduit .(LFDB

TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)

Supplying and installation of 25A AC starter Modular type,

Schneider/Siemens/Legrand coil voltage-230 Volt A.C. on mod

Box of suitable size including modular coveras required as per

direction of Engg.-in-Charge .All the Components should be

275 13 warrantied for a replacement period of 2 years against defects 12 739.86 8,878.32

with ncessary test report & Warrnaty certificate to be submitted to

the department for genuinity of product & to avail free aftersales

service within warranty period for acceptance of materials.

Supply and fixing CALL bell (Ding dong type) /Buzzer on the

existing switch box/cover. .as required as per direction of Engg.-in-

Charge.All the Components should be warrantied for a

276 14 replacement period of 2 years against defects with ncessary test 2 252.52 0.00 505.04

report & Warrnaty certificate to be submitted to the department for

genuinity of product & to avail free aftersales service within

warranty period for acceptance of materials. Nos

S/F of Bakelite angle holder/batten holder A catagory ISI marked

as approved )of ISI marked conforming to IS-1258/1987 in place

of ceiling rose as per direction of Engg.-in-Charge .All the

277 15 Components should be warrantied for a replacement period of 2 Each 5 89.68 448.40 0.00

years against defects with ncessary test report & Warrnaty

certificate to be submitted to the department for genuinity of

product & to avail free aftersales service within warranty period for

acceptance of materials.

S/F of 5 step type Modular electronic Fan Regulator ISI Marked

with all connection complete in all respect as per direction of

Engineer in charge

279 B Sub-Head II (Light fitting Fixture & Fan)

Supplying, installation, of exhaust fan of heavy duty 300 mm

sweep 1400 rpm with louvers of exhaust fan in the existing wall,

280 1 including fixing & conntection as required as per direction of Engg.- 3 3,693.40 0.00 11,080.20

in-Charge. Replacement Warranty will be 2 years.

Supplying, installation, of exhaust fan of heavy duty 380 mm

sweep 1400 rpm with louversof exhaust fan in the existing wall, including

fixing & conntection .as required as per direction of Engg.-in-Charge.

Replacement Warranty will be 2 years. Nos

Supplying, installation, testing and commssioning of 1200 mm

sweep white/milky colour BLDC ceiling fan with aluminium blades

having wattage not more than 28W and air delivery ≥215m3/min

including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm

282 3 PVC insulated, copper conductor, single core cable etc. as required as per 20 4,394.32 0.00 87,886.40

direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan

Supplying and fixing of Energy efficient Recess /Surface

mounted square/round shaped LED luminaire made up of CRCA

powder coated sheet steel of not more than 25W and system

lumens output not less than 3250 lumens (130 lm/ wt) with

diffusers for better light transmission and pure effect with High

luminous flux LEDs for better light output, CRI not less than 80,

283 4 CCT of 5700-6500 degree K, THD less than 10%,internal surge 35 5,574.32 0.00 1,95,101.20

protection of 3 KV, complete with Non integrated isolated

electronic driver (protects the output /secondary side from any

disturbance on the input / primary side ensuring safe

operation)and all other accessories suitable for operation on140-

270 V, 50 Hz ,L70 @50,000 burning hrs (2 years warranty)supply

.as required as per direction of Engg.-in-Charge . The luminaire No

must be Replacement Warranty will be 2 years.

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supplying and fixing of Energy efficient surface /recess

mounted square /round shape 18 W LED luminaire of dimension

of consists of white powder coated , die-cast Alluminium housing

with high quality frosted diffuser for glare-free uniform lighting

distribution with wattage not more than 18 watt and lumen output

of 1800 lumens, , CRI not less than 80,CCT of 6000 degree

K,THD less than 10%, with electronic driver, internal surge

protection of 3 KV , L70 B50: 50000 hrs and all other

accessories suitable for operation on 220 V to 240 V supply as

required as per direction of Engg.-in-Charge..The luminaire

should be Replacement Warranty will be 2 years

SITC of energy efficient LED tube light fittings with decorative

alluminium batten and LED tube light having power rating not

more than 20 watt and lumen output not less than 2000 lumen

complete with electronic driver and all other accessories with 859.04

diffuser having 2 years warranty i/c connection etc as required as

per direction of Engg.-in-Charge. . The luminaire should be

Replacement Warranty will be 2 years .

SITC of Sleek LED 10 watt mirror light fitting with extruded

polycarbonate housing,High optically efficient diffuser,above wash

286 7 basin complete with all accessoriesetc. directly on wall, including connection 10 868.48 0.00 8,684.80

with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and

earthing etc. as required as per direction of Engg.-in-Charge. Nos

Supplying and fixing extra conduit down rod of 20 cm length G.I.

pipe 15 mm dia, heavy gauge including painting etc. as

287 8 requiredas required as per direction of Engg.-in-Charge . 15 38.94 0.00 584.10

(Note : More than 5 cm length shall be rounded to the nearest 10

cm and 5 cm or less shall be ignored)of ISI mark as approved.

288 C BDBS,DB,AC DB,FLOOR PANELS,MCBS

Supplying and fixing of following mentioned way, three pole/single

pole and neutral, sheet steel,double door MCB distribution board, 415

volts/240 volts shall be as per IEC 61439-3,integrated door earthing system

offering additional safety to the user,High quality polyurethane Gasket,the box

and cover shall be fabricated to withstand IK09,the DB should be properly pre-

treated with 7 tank process and duly powder coated, phosphatized with powder

289 1 coated finish, on surface/recess, complete with terminal blocks,with suitable 0.00 0.00

size FR PVC insulated copper conducter up to terminal blocks, tinned copper

busbar, neutral busbar, earth bar, din bar as per direction of Engg.-in-Charge.

The Distribution boards should be Replacement Warranty will be 3 years.

4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC

61439-3 suitable for Flush mounting and Surface mounting with

290 2 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth 6 5,038.60 30,231.60

Bar & Cable ties for cable management, prefitted masking sheet,

IP43-IK09 with metal door Warranty on DB is 3 years Nos

Supply and fixing of 12 way DD single pole and neutral sheet

steel MCB distribution board 250V on surface/recess complete

with tinned copper bus bar, neutral bus bar, earth bar, din bar,

291 3 detachable gland plate, interconnections, phosphatized and 2 2321.06 4,642.12

powder painted including earthing etc. as required (but with out

MCB/ RCCB/ Isolator) Warranty on DB is 3 years

2+4 way MCB Enclosure DB (GLAZED door)(only each EM.

292 4 CONNECTION UPS LOAD)Warranty on DB is 3 years 50 378.78 18,939.00 0.00

8 Way(8+24) Way TPN MCB DD DB Horizontal Type suitable for

Flush mounting and Surface mounting with 100A Copper Bus Bar

for each phase, with neutral Bus bar, Earth Bar & Cable ties for

cable management, prefitted masking sheet, IP43-IK09 with metal

door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD)Warranty on DB is

Supplying and fixing 20 amps rating, 240 volts, C series,10KA

breaking capacity, Double poles MCB of in the existing MCB DB

complete with connections as per direction of Engg.-in-Charge. .Warranty on

MCB is 3 years. Nos

Supplying and fixing 6 amps to 32 amps rating, 240 volts, C

series,10KA breaking capacity, single poles MCB of the existing

295 7 MCB DB complete with connections as per direction of Engg.-in-Charge. 3.00 5405.58 16,216.74 0.00

.Warranty on MCB is 3 years.

Supplying and fixing 40 Amps rating, C series,10KA breaking

capacity,4P, 415 volts, MCB . - Acti 9 in the existing MCB DB

complete with connections, testing and commissioning etc. as

required as per direction of Engg.-in-Charge. .. The MCB should

be Replacement Warranty will be 3 years..

Supplying and fixing 40 Amps rating,C series,10KA breaking

capacity, 4P, 415 volts, RCCB 30mA . in the existing MCB DB

297 9 complete with connections, testing and commissioning etc. as 3.00 3499.88 10,499.64 0.00

required as per direction of Engg.-in-Charge. . The MCB should

be Replacement Warranty will be 3 years. Nos

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supplying and fixing 25Amps rating,C series,10KA breaking

capacity, DP 240 volts, MCB in the existing MCB DB in the

298 10 existing MCB DB complete with connections as per direction of 3.00 6182.02 18,546.06 0.00

Engg.-in-Charge. The MCB should be Replacement Warranty

will be 3 years. Nos

299 D (Earthing) INSTALLATION

Supplying,installation,testing & commissioning of materials and

installation of GI earth plate 600mmx600mmx6mm thick ISI

marked with G. I. nut bolts & washers including cost of burnt

300 1 wood charcoal, salt, foreign soil, water pouring arrangements, 2.00 15,340.00

brick masonary enclosure on top with removable RCC cover

complete with labour for excavation of pit in all kinds of soil & rock

as required and as per direction of Engineer-in-charge. Nos 7,670.00

Providing and fixing 6SWG GI wire on surface or in recess for

301 2 loop earthing as required.as per direction of Engg.-in-Charge. 80.00 2,360.00

Providing and fixing 25mm x 5 mm GI strip on surface or in recess

302 3 for connections etc. as required as per direction of Engg.-in- 80.00 14,348.80

Charge. Nos 179.36

303 E CABLING AND END TERMINATION MAIN AREA

Supplying of one number PVC insulated armoured and PVC

sheathed XLPE property AL. conductor power cable of 1.1 KV

304 1 grade Gloster of following size cables as per direction of Engg.- 44.00 676.14 29,750.16 0.00

Supplying of one number PVC insulated armoured and PVC

sheathed XLPE property AL. conductor power cable of 1.1 KV

grade POLYCAB/HAVELLS/Finolex or equievalant reputed make

ISI marked as approved of following size cables as per direction

of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to

be submitted to the department for genuinity of product & to avail

free after sales service within warranty period for acceptance of

306 a 3.5core x 95 sq mm ( main panel ) Mtr 85.00 1145.78 97,391.30

4core x 16 sq mm

3.5core x 35 sq mm

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size not exceeding 25 SQ. MM direct in ground in the

309 3 trench in one horizental formation including excavation ,sand 15.00 185.26 2,778.90

coushing protection covering and refilling the trench etc as

required as per direction of Engg.-in -charge. Mtr

310 4 Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv Mtr 80.00 210.04 16,803.20

Laying exceeding

of PVC Insulated25PVC

not exceeding 120 of

power cable SQ.

311 5 grade size exceeding 120 SQ. MM but not exceeding 400 SQ. 236.00 4,248.00

MM direct in ground in the trench in one horizental formation Mtr 18

Laying of excavation ,sand

PVC Insulated coushing

PVC Seatedprotection covering

/XLPE power cableand

grade size not exceeding 25 SQ. MM direct in ground in the

EXISTING PIPE etc as required as per direction of Engg.-in -

charge. Mtr 18

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM

direct in ground in the EXISTING PIPE etc as required as per

direction of Engg.-in -charge. Mtr 18

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

314 8 grade size not exceeding 25 SQ. MM in open duct etc as required 54.28 542.80

as per direction of Engg.-in -charge. Mtr 10

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size exceeding 25 SQ. MM in open duct 400 SQ. MM

direct in ground in the EXISTING PIPE etc as required as per

direction of Engg.-in -charge. Mtr 10

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

316 10 grade size not exceeding 25 SQ. MM in surface with shaddle and 123.90 1,239.00

screw etc as required as per direction of Engg.-in -charge. Mtr 10

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size not exceeding 120 SQ. MM From 25 SQ. MM in

317 11 surface with shaddle and screw etc as required as per direction of 188.80 1,888.00

Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size not exceeding 400 SQ. MM From 120 SQ. MM in

318 12 surface with shaddle and screw etc as required as per direction of 1,538.72 0.00

Engg.-in -charge.

Supplying and making end termination with brass compression

319 13 gland and aluminium lugs for following mentioned size cable.as 0.00 0.00

per direction of Engg.-in-Charge.

4 core x16sq mm

3.5 core x35 sq mm

3.5 core x95 sq mm 1,128.08

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Providing,fixing and laying of following dia G.I. pipe (medium

324 14 class) in ground complete with G.I fitting incl. trenching(75 mm 6,887.66

depth)and refilling as per direction of Engg.-in-Charge.

Providing,fixing and laying of following dia HDPE pipe (medium

class) in ground complete with fitting incl. trenching(75 mm

depth)and refilling as per direction of Engg.-in-Charge.

326 F MAIN CONTROL PANEL AT GF

S/I/T&Commissioning of CPRI tested LT indoor floor mounted cubical type

electrical main panel (for both light and power circuit) made out by 2mm CRCA

steel sheet duly derusted & painted by siemens gray powder cote paint fallowed

by 9 tank acid treatment is designed as G.A drawing as per direction of Engg.- Set

In commer-1-01 number of 630A 4P Icu=100%Ics,36Ka LSIG

MCCB with micro processor based release Electrical locking for

In commer-2-01 number of 400A(320-400) 4P

329 b Icu=100%Ics,36kA LSIG MCCB with micro processor based 0.00

release Electrical locking for normal & DG (DG 160 KVA

In commer-2- 01 no of 400A 4P onload changeover switch (160

Busbar-1&2 04 numbers of 800Amps copper busbar with 1.6A/SQ.MM

current carring capacity. busbar duly sleeved by color coated PVC sleeve &

supported by suitable size DMC insulator. (for outgoing)

Out going- 08 numbers of 100A 4P MCCB,,25Ka MCCB withTMR based

332 e release with adjustable overload ,Icu=100%Ics 0.00

Out going- 4 numbers of 160A 4P Icu=100%Ics,,25Ka MCCB withTMR

333 f based release with adjustable overload 0.00 0.00

Out going- 6 numbers of 32A rating,10 KA breaking capacity,C series, 4P

Instrument- (i) 06 numbers phase indicating lamp with toggle switch & HRC

(ii) 02 set of digital type multifunction meter with CT for

voltage,current,frequency,PF,THD indication with RS 485

COMPACTIVITY FOR bms data.

CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER

Supplying,fixing of perforated cable trays with horizental & vertical

bends,reducers ,tees,crossover,brakets & other accessories ar

requited confirming to IS-IEC -61537 ,the cable tray shall be

galvanised for corrosion protection confirming to DIN EN

10346/ISO 1461. Size 60mm(H) x 200mm(W) of.The Load

bearing capacity of the Cable Trays should be minimum of

104.8Kg/meter at the span of 1.5Meter as per UL specifications

as required as per direction of Engg.-in-Charge.

Supplying,fixing of perforated cable trays with horizental & vertical

bends,reducers ,tees,crossover,brakets & other accessories ar

requited confirming to IS-IEC -61537 ,the cable tray shall be

galvanised for corrosion protection confirming to DIN EN

10346/ISO 1461. Size 60mm(H) x 300mm(W) of.The Load

339 2 bearing capacity of the Cable Trays should be minimum of 12 1,146.96 0.00 13,763.52

104.8Kg/meter at the span of 1.5Meter as per UL specifications

as required as per direction of Engg.-in-Charge.

GALVANIZED(GC) AS PER EN-ISO-1461 , FLOOR RACE WAY

WITH JUNCTION with internal dimensions of size 38mm(H) x

225mm(W), of .(With all

accessories,bend,cover,supporter)WITH REQUIRED SIZED

340 3 JUNCTION BOX ,COVER CONNECTOR as required as per 21 2,101.63 0.00 44,134.27

direction of Engg.-in-Charge.(3 COMPARTMENT TOTAL 54 MM

LIGHTENING PROTECTION SYSTEM

Supply of 8 mm Aluminum Round Conductor.Tested as per IEC

62561. as per direction of engineer in charge.

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supply of Roof conductor holder for parapet- Polyamide

Conductor holder:With M8 female thread or diameter 7mm, M8

Screw to connect the conductor holder.Weather and

343 2 temperature resistant from -35 to +90 degree Celsius tested. No 150 60.18 0.00 9,027.00

Conductor holder @ 1 meter distance.Tested as per IEC 62561.

as per direction of engineer in charge.

Supply of Polyamide roof cable holder for flat roof:

DIN 48829 Form B1. Closed form with bottom. Filling weight

344 3 1Kg (frost-resistant concrete). Sleeve from polyethylene, black No 12 234.82 0.00 2,817.84

@ 1 meter distance. Tested as per IEC 62561. M

Supply of Connector: For T cross and parallel connectors. Quick

installation using hexagonal bolt M10X30 high-grade hot dip

345 4 galvanised. Tested as per IEC 62561.(2nos/expansion piece ). No 12 239.54 0.00 2,874.48

Supply of 1 mtr vertical air terminal with mounting accessories

on the flat surface to meet the requirements of IS/IEC 62305.

346 5 Tested for Electrical , mechanical and chemical as per IEC No 6 1,373.52 0.00 8,241.12

62561. Tested for 100kA lightning current.

Supply of Vertical air terminal with accessories:Providing of Air

as per IS-IEC -62305 part-3

347 6 Nominal size Ø10/16 mm aluminium rod: No 5 3,724.08 0.00 18,620.40

3 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN

48801) Suitable for high wind load.

Tested as per IEC 62561.

Supply for Providing of Stand for Fang Fix system 16 kg with base

348 7 clamp ,made up of frost resistant concrete and clamp tested No 5 2,902.80 0.00 14,514.00

upto 100KA lightning current .

Supply for Providing of Stand for Fang Fix system 16 kg made up

resistant concrete.

Supply of Test Joint (Folding Clamp) suitable to connect 8mm

round conductor and max by 30x3 mm GI strip as specified in

drawing and directed by Engineer.

Tested for 100kA lightning current.

Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr

For Test Joint .Internal dimensions: 100x100x48 mm

Supply of Galvanised Steel Flat 30X3 mm thickness from earth

electrode directly in ground as required. Flat conductor Hot

Dipped Galvanized. Tested as per IEC 62561.

Supply for Providing of Cross connector for Flat: Suitable for

30mm Galvanised steel strip. Installed with 4 nos of hexagonal

plate. Tested for 100kA lightning current.

Supply of flat conductor holder- Fit: FL 30, With mounting hole

6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from

hot-dip galvanised steel, Bottom section from polyamide, black.

Supply for Providing of Plastic Corrosion Protection strip: Approx

1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical

Supply of UL Listed maintenance free ,Low carbon copper

coated earth rod of 3 metre electrode having diameter of 17.2

mm with copper coating thickness of 250micron tested as per

Supply of universal clamp made of SS to connect rod with flat

Supply of Earth conductivity enhancing mineral compound shall

kg/pit tested as per IEC 62561-7,TCLP tested

Supply of The above arrangements shall be provided with Heavy

earth champer of 5000kg load bearing capacity to ensure the

safety of earthing system

Installation of The above arrangements including all accessories

360 19 as per Direction of Engg. In charge. Job 1 16,816.18 0.00 16,816.18

Subhead- 1 (Lan System) 0.00

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing

surface/ recessed steel/ PVC conduit as required: The 4 pair

Unshielded Twisted Pair cable shall be UL Listed,exceeds the

requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4

twisted pairs separated by internal PE Cross Separator. Full

separator. Half shall not be accepted. Rip Cord is must,Insertion

Loss of 32.8 db/100m at 250 MHz ,Cable should support

operating temperature from -20° to +70°C Cable support

Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay

Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ±

15 Ω @100 MHz. and Propagation Delay @250 MHz : 536

ns/100m, ETL Verified 4 connector channel performance up to

700 MHz , RoHS Compliant.

SITC of Cat6 I/O with Dual Face plate: The Outlet shall meet or

exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, &

EN50173. The information outlet NEXT, PSNEXT, FEXT,

ELFEXT, PSELFEXT and return loss should be verified for CAT6

@ 250Mhz & CAT6A @ 500Mhz. The information outlet connector

shall be of gold/nickel, thickness of gold > 0.8 μm. The connectors

shall be compatible as per IEEE 802.3af standard for POE

application. The PVC material of Face plate should complie ABS

/UL94-V-O certified.

SITC of Cat6 I/O with Single Face plate: The Outlet shall meet or

exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, &

EN50173. The information outlet NEXT, PSNEXT, FEXT,

ELFEXT, PSELFEXT and return loss should be verified for CAT6

@ 250Mhz & CAT6A @ 500Mhz. The information outlet connector

shall be of gold/nickel, thickness of gold > 0.8 μm. The connectors

shall be compatible as per IEEE 802.3af standard for POE

application. The PVC material of Face plate should complie ABS

/UL94-V-O certified.

SITC of Cat 6, 24-port loaded, 1U Modular Jack Panel Should

accommodate Cat6 with Rear Cable Management and Front

removable Tooless Information outlet. Should have easy clip

365 4 management with labels and clear label covers, Made with of Nos 2 11,585.24 0.00 23,170.48

Dicast Aluminium Alloy Material and Non Corrosive with Cat6

toolless RJ45 x 24 ports with color code front panel with patch

SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch

Cords are Factory Tested for Better Quality and Suitable for the

High Speed Data Transmission. Complies to the Standard

ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds

366 5 Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Nos 6 403.56 0.00 2,421.36

Reduced Toxic Gasses Emitted During Combustion , RJ45,

8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory

Tested , Transparent Boot Cable Assemblies.

SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch

Cords are Factory Tested for Better Quality and Suitable for the

High Speed Data Transmission. Complies to the Standard

ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds

367 6 Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Nos 6 480.26 0.00 2,881.56

Reduced Toxic Gasses Emitted During Combustion , RJ45,

8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory

Tested , Transparent Boot Cable Assemblies.

SITC of 6 core Single mode OS2 Unitube Armoured Optical fiber

cable through existing conduit: The Fiber should be OS2 Single

Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated

Steel tape Central loose tube. ( Standard Approved: ISO 11801

368 7 class B1.3 / EN 60793-2-50: class B1.3 / ITU Recommendation Mtr 25 145.14 0.00 3,628.50

G.652.D - the oder ITU designations A, B and C are also fulfilled /

OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are

fulfilled/IEEE 802.3 - 2002 incl. 802.3ae ) Jacket.

SITC of Rack mount Draw Type Loaded 6 port LIU available in

Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled

Steel as Raw Material , Consist of Top Cover and Bottom Panel ,

Easy to Assemble and Dissemble , Three Types of Input Holes

369 8 Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC Nos 2 9,848.28 0.00 19,696.56

or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray

,Adaptor, SM, Duplex SC, PC Type ,Support the TIA/EIA

Telecommunication Wiring Standards. Compact Design ,

Telcordia GR-326-Core .

SITC of OFC Patch Cor, SM (OS2), Duplex LC-SC, LC-LC PC

Type, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are

370 9 offered in LSZH Jackets with Corning Fiber,Insertion Loss : <= 0.2 Nos 2 2,715.18 0.00 5,430.36

db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC>= 45db,

UPC>=50db, APC>=60db.

Supply & Installation of 1000Base LX Fiber Transceiver.

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

SITC of 24 Port Layer 2 PoE+ Switch having 24 x 10/100/1000

Mbps Ethernet PoE+ ports with 4 x 1/10Gig SFP+ ports ,1 x RJ45

port console port ,Switching Capacity 128 Gbps , Throughput 96

Mpps ,MAC Address 16k , Switch should support IEEE 802.3af

(15.4W) & IEEE 802.3at (30W). Total PoE power: 370W or above

, Switch should support DHCP server/relay/client, DHCP

snooping/option82 , Switch should support Console, Telnet, SSH

v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON , TFTP, FTP, SFTP,

NTP, ZTP, SPAN, RSPAN,Switch should support support

ICMPv6, DHCPv6, ACLv6 ,IPV6 Telnet ,Temperature 0°C -50°C

,Power Supply AC: 100-240V.

Supply , Installation, testing , commissioning of 32 Channel NVR

with 4 SATA; 384 Mbps incoming bandwidth, Up to 8 Megapixels

Resolution Display and Recording, H.265 video compression

technology with real time encoding, Full function CMS (Central

monitoring software) supported, Two way audio supported, Dual

streaming technology to encode recording stream and network

stream separately, Supports remote monitoring on Mobile Client

(Android, IOS), TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP,

NTP, SMTP, Time/ Date, Alarm, Motion Detection & Exact Search

(accurate to second), Record Snapshot, FTP, Preset Calling,

Email notification supported, Manual/ Alarm/ Motion Detection/

Continuous, CE, FCC, RoHS). Make-Honeywell series

SITC of 24U 600/650D UL Listed Floor mount Rack with Front

perforated door with 3 point lock, Rear mesh door with Cam lock

and 3inch Castor Wheel included with 2 no 6/16 Amp Indian-

Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp

374 13 MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable Nos 1 47,347.50 0.00 47,347.50

2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with

Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray -

Ventilation - 495W - 375D and H/W screw920sets).

Supplying and fixing of following sizes of Heavy class PVC FRLS

conduit ISI marked along with accessories in surface/recess

including cutting the wall and making good the same in case of

375 14 recessed conduit as required as per direction of Engg.-in-Charge . 0.00 0.00

Subhead- 3 (IP-CCTV System)

Supply, Installation, Testing & Commissioning of 5MP IP Network

TDN Low-Light IR Fixed Lens Dome/Bullet Camera, 1/2.8" CMOS

or better, 5MP (2592 x 1944) @ 25fps or better, triple stream at

various resolution & Frame Rates, Min. Illumination required 0.007

lux (color), 0 Lux IR On, 2 IR LEDs, Smart IR with upto 50m IR

distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N

Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video

Compression technology such as H.265, H.264 & MJPEG , Fixed

Lens 2.8mm, Field of View FoV H:90°, V:62°, BLC, HLC, WDR,

3DNR, White Balance - Auto/Manual, Minimum Edge Intelligence

379 1 Video Analytics : Video Motion Detection, Tampering, Loitering, Nos 10 17,638.64 0.00 1,76,386.40

Intrusion, & People Counting, 4 Privacy Mask, 8 Region Of

Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256,

SSH/Telnet closed, Stream Encryption, 2-Way Audio Full Duplex

Line IN/Out, 256GB SD card support, Alarm: 1In/1out, PoE

(802.3 af) and 12V DC, Max 5W, IP 66/67 & IK10 with Die Cast

Aluminium Housing, Having Operating temp range : –40°C to 60°

C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130-

4), FCC Part 15, EN 55032 & RoHS (EN63000)/NDA compliant.

Supply, Installation,Testing & Commisioning of Surveliance 10 TB

SITC of 55" UHD IPS Commercial Digital Display for Small Size

Discussion & Chambers: Brightness (440 nits or higher), Dynamic

Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static

(Panel) Contrast Ratio-1200:1, Response Time (G to G)-8 ms,

381 3 Refresh Rate.-60 Hz, Life span (hrs)-30,000, Speaker (Sound Nos 1 1,10,777.22 1,10,777.22

Output):10W + 10W, Speaker System: 2.0 ch, DVB-T2/C

Broadcasting System, Commercial Smart UX, webOS version

(webOS 6.0), BIS Certification with 3 years onsite warrenty.

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supply , Installation, testing , commissioning of 32 Channel NVR

with 4 SATA; 384 Mbps incoming bandwidth, Up to 8 Megapixels

Resolution Display and Recording, H.265 video compression

technology with real time encoding, Full function CMS (Central

monitoring software) supported, Two way audio supported, Dual

streaming technology to encode recording stream and network

stream separately, Supports remote monitoring on Mobile Client

382 4 (Android, IOS), TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP, Nos 1 43,160.86 0.00 43,160.86

NTP, SMTP, Time/ Date, Alarm, Motion Detection & Exact Search

(accurate to second), Record Snapshot, FTP, Preset Calling,

Email notification supported, Manual/ Alarm/ Motion Detection/

Continuous, CE, FCC, RoHS).

Sub-Total of Electrical Works 7,31,515.04 14,46,258.65

383 Fire fighting Works

PUMPS AND APPURTENANCES

Supplying, installation, testing and commissioning of Electric

Motor Driven Pressurization Terrace Pump having discharge of

384 1 450 LPM at 35 Mtr head complete with Pump Set, Electric Motor Nos 1 77,266.40 0.00 77,266.40

suitable for operation on 415 V ,3 ph, 50 c/s AC supply , Base

SITC of FRLS,PVC outer sheateh, steel armoured, aluminium ,

385 2 1100v grade power cables with glands etc.The minimum size of 0.00 0.00

the cables shall as mentioned below,

Supply, installation, testing and commissioning of Floor/Wall

mounted sectionalised, front operated top entry dust and vermin

proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4

wire, 50Hz distribution system fabricated out of 2.0 mm thick

CRCA sheet, insulated busbar with heat shrienkable PVC sleeve,

base frame, complete with all accessories including

interconnections, earth bus etc as required comprising of One (1)-

63 Amp, 10 KA,TPN (Class-C) MCB with 3 Nos Phase indicating

lamps with control fuse/ MCB, Digital Voltmeter with selector

switch. DOL starter with O/L and Single Phasing Preventor

suitable for 7.5 HP motor. ON/OFF indication lamps, Auto manual

switch and ON/OFF push button.as per direction of engineer in

charge Control panel for fire pumps for auto action.

389 B PIPE & VALVES ETC. 0.00

Supply,Installation,Testing & Commissioning of 'C' Class heavy

duty MS pipe (as per IS 1239 upto 100 mm NB and IS 3589 for

above 100 mm 6.33mm thick) with flanges and fitting such as

bends, tees, reducers, rubber insertions and galvanized nuts and

bolts of following size on surface along wall / shaft with MS

390 1 bracket, suspended from ceiling/ beam with suspenders duly 0.00

painted with two coats of primer and finished with enamel paint of

approved colour laid through pipe or in trench after wrapping with

hassen cloth after applying coal tar primer as required as per

direction of Engineer-in- charge.

Providing, fixing, testing and commissioning of following size

manually operated hand lever type cast iron double flanged slim

seal wafer type Butterfly valves with EPDM iron disc as per IS-

13095 having pressure ratting PN -1.60 including fixing the same

with supply of required jointing materials like rubber insertion, MS

nuts & bolts, paint etc. and testing the joints with required water

pressure etc. all complete as per specification & direction of E.I.C.

Providing, fitting & fixing of following size cast iron double flanged

type dual plate Non return Valve as per IS- 5312 (Part 1): 2004

with ISI mark of pressure ratting PN-1.60 including fixing the same

with supply of required jointing materials like flanges, rubber

insertion, MS nuts & bolts, paint etc. and testing the joints with

required water pressure etc. all complete as per specification &

direction of Engineer-in-charge.

SITC of Gun metal chrome finished Ball valves with fittings of

396 4 screwed end type. 0.00 0.00

Supply,Installation,Testing & Commissioning of Pressure gauge of

0-16 Kgf/sq.cm. range with cut-off bronze ball valves of suitable

size with all accessories as per direction of Engineer-in-charge.

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supply,Installation,Testing & Commissioning of Pressure Switch

with cut-off bronze ball valves with integral strainer & flare nut

(mixed ends) of suitable size with all accessories as per direction

of Engineer-in-charge.

Supply,Installation,Testing & Commissioning of stainless steel

strainer fabricated out of 1.6 mm thick stainless steel sheet Y

Stainer with 3 mm dia hloes with stainless steel flange as required.

402 C DOWN COMER SYSTEM 0.00 0.00

Supply,Installation,Testing & Commissioning of Stainless steel

Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single

headed , oblique type, as per IS :5290/93 and as per direction of

403 1 Engineer-in-charge Nos 2 8,130.20 0.00 16,260.40

Supply,Installation,Testing & Commissioning of SS short branch

pipe with 63 mm male inlet and 19 mm outlet nozzle, as per

404 2 IS:903 and as per direction of Engineer-in-charge. Nos 2 2,808.40 0.00 5,616.80

Supply,Installation,Testing & Commissioning of 63 mm NB and

15meter long RRL Fire Hose fitted with 63mm intstantaneous

405 3 stainless steel male & female SS coupling, complete by GI wire Nos 4 6,926.60 0.00 27,706.40

binding for Internal Hydrant as per direction of Engineer-in-charge.

Providing supply & fixing of MS Hose Box for of suitable

size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30

mtr long fire hose and a branch pipe, wall mounted type as per

direction of Engineer-in-charge.

Supply,Installation,Testing & Commissioning of Swinging pattern

wall fixing first aid hose reel made from MS sheet and waterways

and moving parts with rubber hose of 20 mm dia. and 30 mtrs.

long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585

Type-I., complete with all accessories as per direction of Engineer-

Providing, fitting and fixing of C.I. 25 MM single air relief valve with

stop cock confirming to IS:14845/2000 with ISI mark for water

works purpose including fixing the same with hydrant riser

408 6 including testing & commissioning the system etc. all complete as Nos. 1 1,699.20 0.00 1,699.20

per approved specification & direction of Engineer-in-charge.

Providing, fitting & fixing of 2-Way GM fire brigade connection

consisting of 63 mm dia instantaneous type male couplings with

built-in check valves, 150mm dia flanged outlet complete with

409 7 bolts, nuts and rubber insertions confirming to IS:904 with ISI mark Nos. 1 6,974.98 0.00 6,974.98

including testing & commissioning the system etc. all complete as

per apporoved specification & direction of EIC.

EXTINGUISHER SYSTEM

Supply,Installation,Testing and Commisioning of ISI marked

411 1 (IS:2878) Fire Extinguisher ,Carbon di-oxide type capacity 4.5kg Nos 4 9,086.00 0.00 36,344.00

with all accessories

Supply,Installation,Testing and Commisioning of ISI marked

(IS:2878) Fire Extinguisher ,ABC type capacity 6kg with all

Fire buckets (FILLED WITH SAND) round bottom type enamel

painted, white inside & Red out side and Letter "FIRE" in black out

side and handle with mounting bracket.

SIGNAGES:-Providing and installing in position the following type Sqinch

of sign boards made out of 3mm thick flexyle photoluminescent

based glow in dark sheeting with luminous properties enclosed in

a weather proof Uvstabilized film with UV screen printing by

415 1 imported links pasted over3 mm thick cast acrylic from front side 200 21.24 0.00 4,248.00

with 6 mm thick acrylic, -20 to+80 deg C, Suitablefor indoor use,

greenish yellow, glow visible upto 4-6 hr in total darkness.

Supply, Installation,Testing & Commisioning of Manual based

Addresable fire alarm control panel , fully networkable with each

loop capable of taking 99 devices, 8 line x 40 character alpha-

numeric liquid crystal display .The panel shall be soft addressable

type . The panel shall be able to give pin point location of all

fire/fault conditions. Further, the panel must be able to No. 1 40,710.00 40,710.00

automatically switch off respective control switches when ever any

alarm is triggered. The panel shall have integral SMF lead acid

batteries with sealed cells of 24 V capable of running for a

minimum of 8 hours with integral battery charger complete as

required and as per specification. The fire alarm panel shall be

Digitally signed by DIWAKAR

BoQ: INOVATION & INCUBATION CENTRE (G+1) BUILDING

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supplying, installing, testing and commissioning of Addressable

Manual Call Point with back box.

Supplying, installing, testing and commissioning of Analogue

Addressable Loop powered Sounder with strobe light.

Supplying, installing, testing and commissioning of 2C x 1.5 mm²,

armoured, single stand, outer sheathed, FRLS, PVC insulated

copper conductor cable confirming to specified IS standards

Supplying, installation, testing & commissioning of 2 zone,voice

alarm controller with USB, MP3 player (including 2 zone button

paging station) with seamless integration facility with main fire

421 1 alarm panel for voice evacuation complete as required. Nos. 1 65,724.82 0.00 65,724.82

Supplying, installation, testing & commissioning of digital audio

amplifier 250 Watt, 25V rms operating at 240 Volt AC Supply

422 2 complete as required. Nos. 1 46,680.80 0.00 46,680.80

Supplying, installation, testing & commissioning of ceiling/wall

mounted loud speaker, 3/15 Watt in ABS enclosure complete as

Supplying and drawing of speaker cable Single pair, 2-core, 1.5

424 4 sqmm in existing conduits Mtr. 150 76.70 0.00 11,505.00

Sub-Total of Fire fighting Works 6,46,153.84

Digitally signed by DIWAKAR

BoQ : CENTRE FOR INDIGENOUS KNOWLEDGE & LANGUAGE

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Civil Works 0.00 0.00

Earth work in excavation of foundation trenches in hard soil

including dressing of sides and levelling the bed up to the required

depth and depositing the excavated materials away from the work

1 1 site within 50m initial lead & 1.5m initial lifts with sundries & T&P

required for the work complete including cost of all labour,labour

cess,T&P,sundries etc. as directed by the Engineer in charge.

Filling in foundation trenches and plinth, with excavated earth

including laying the earth in layers not exceeding 23.5 cm thick

ramming & watering with all leads & lifts including cost of all

labour,T&P completed as directed by the Engineer-in-charge.

Supplying and filling in foundation and plinth with good quality river

sand including watering, ramming with cost, conveyances,

royalties of all materials and cost of all labour with T&P required

5 3 for the work etc. complete as per specification & direction of 0.00

Engineer-in-charge

Providing & applying of pre constructional anti-termite treatment by

drilling 12mm dia holes at distance of 30cm @ junction of wall &

floor about 300mm apart deep enough to reach the soil below &

chemical emulsion (IMIDACHLOPRIED 30.5SC mixed with 47.5ltr

water) pumped these holes to soak the soil @ 1 ltr solution of each

hole as per manufactures specification & the holes should be

pluged the filling materials including cost of all materials,

labour,conveyance, T&P , all taxes and hire charges of

machinaries as per direction of Engineer-in-charg

Cement concrete of proportion (1:3:6) in foundation and floors

using 4cm size clean hard black crusher broken granite stone

metal of approved quality and from approved quarry including

hoisting, lowering and laying concrete in layers not exceeding 15

8 5 cm. (6") thick to the required level ramming, watering, curing etc. Cum 58.71 8812.12 5,17,359.68 0.00

complete including cost, conveyance, royalties of all materials with

all labour and T&P required for the work etc. complete in all

respect and as per the direction of the Engineer-in-charge.

Plain cement concrete (1:2:4) using 12mm size black hard crusher

broken granite chips of approved quality from approved quarry

including hoisting, lowering and laying concrete in layers, watering,

curing etc. complete including cost, conveyance, royalties of all

materials with labour,labour cess and T&P etc. required for the

work complete as per the direction of the Engineer-in-charge.

Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth

using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing

strength of not less than 75 kg./sqcm with dimensional tolerance ±

2% including splays cutting circular moulding chamfering and

corbelling and similar such type of works with all necessary

10 7 projections watering and curing after immersing the bricks in water Cum 21.08 6792.08 1,43,177.05 0.00

at least for six hours before use including cost, conveyance, and

royalties of all materials with all labour,labour cess and T & P

required for the work complete in all respect as per direction of

Engineer-in-Charge

Fly Ash brick masonry in cement mortar (1:6) in super structure

using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing

strength of not less than 75 kg./sqcm with dimensional tolerance ±

2% including splays cutting circular moulding chamfering and

corbelling and similar such type of works with all necessary

projections watering and curing after immersing the bricks in water

at least for six hours before use including cost, conveyance,

royalties and taxes of all materials with all labour,labour cess and

T & P required for the work complete in all respect as per direction

of Engineer-in-Charge

Fly Ash brick masonry in cement mortar (1:4) in super structure

using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing

strength of not less than 75 kg./sqcm with dimensional tolerance ±

2% including splays cutting circular moulding chamfering and

corbelling and similar such type of works with all necessary

projections watering and curing after immersing the bricks in water

at least for six hours before use including cost, conveyance,

royalties and taxes of all materials with all labour,labour cess and

T & P required for the work complete in all respect as per direction

of Engineer-in-Charge

Digitally signed by DIWAKAR

BoQ : CENTRE FOR INDIGENOUS KNOWLEDGE & LANGUAGE

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Providing, lifting, hoisting and laying Reinforced cement concrete

of M-25 grade as per approved designs and drawings having a

minimum compressive strength (in work test) 250 Kg. / Square cm.

in 15 cm. cubes at 28 days after mixing and test conducted in

accordance with I.S. 516 using 12 mm. to 20 mm. size black hard

crushed broken granite stone chips and screened and washed

sharp sand for mortar of approved quality from approved quarry,

washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to

be mixed in concrete mixture with Portland slag cement (PSC)

including hoisting, lowering, laying and compaction concrete by

using vibrators, watering and curing for 28 days, centering and

18 10 shuttering then after dismantling and removing debris from the 0.00 0.00

work site and finishing the exposed surface smooth providing

grooves or beads wherever necessary including cost,

conveyance, loading, unloading, royalties and taxes of all

materials and cost of all labours, sundries, T & P required of the

work etc. complete in all respect as directed by the Engineer-in-

Charge. But excluding cost and conveyance of M.S. rods or Tor

steel and binding wires and labour charges for straightening,

cutting, bending etc. of M.S. rods or tor steel tying the grills and

placing in proper position.

19 Ground Floor 0.00 0.00

21 b) Column up to plinth Cum 4.32 20715.61 89,491.43 0.00

23 f) Column above plinth Cum 9.07 20715.61 1,87,890.56 0.00

29 1st floor 0.00

30 a) Column above plinth :- Cum 9.07 23135.08 2,09,835.18 0.00

36 Terrace floor 0.00 0.00

37 a) Column above plinth :- Cum 3.67 26031.15 95,534.34 0.00

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor

steel of primary steel producers such as SAIL / TATA / RINL /

JINDAL STEEL / SHYAM STEEL/ SEL Tiger (grade Fe-500D) etc.

including bending, binding, welding and jointing if necessary and

tying the grills and placing in position as required for R.C.C. Work

and for providing fan hooks as required, hoisting, lowering, laying

41 11 including cost, conveyances of M.S. Rod or tor steel and binding 0.00 0.00

wires of 18 to 20 gauge and labour required for the work for

bending, binding and tying the grills in all floors with labour cess

etc. (payment will be made on standard weight of B.I.S. for M.S.

Rods or tor steel only) etc. complete as per specification &

direction of Engineer-in-charge.

Providing 12 mm thick cement plaster with cement mortar of mix

(1:6) with screened and washed sharp sand for mortar and

finished smooth to the rough surface of walls in all heights after

racking out joints including watering and curing, rounding of

45 12 corners, providing grooves where ever necessary with cost, 0.00 0.00

conveyance, royalties of all materials with cost of all labour,labour

cess, T&P, and scaffolding required for the work etc. complete in

all respect as directed by the Engineer in charge.

Providing 16 mm thick cement plaster with cement mortar of mix

(1:6) with screened and washed sharp sand for mortar and

finished smooth to the rough surface of walls in all heights after

racking out joints including watering and curing, rounding of

49 13 corners, providing grooves where ever necessary with cost, 0.00 0.00

conveyance, royalties of all materials with cost of all labour,labour

cess, T&P, and scaffolding required for the work etc. complete in

all respect as directed by the Engineer in charge.

Digitally signed by DIWAKAR

BoQ : CENTRE FOR INDIGENOUS KNOWLEDGE & LANGUAGE

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Providing 6 mm thick cement plaster with cement mortar of mix

(1:4) with screened and washed sharp sand for mortar and

finished smooth to R.C.C. work after closed deep chipping & slurry

treatment including watering and curing, rounding of corners,

53 14 providing grooves where ever necessary with cost, conveyance, 0.00 0.00

royalties of all materials with cost of all labour,labour cess, T&P,

and scaffolding required for the work etc. complete in all respect

as directed by the Engineer in charge.

Fixing granite tiles of approved dimension area above 0.4 sqm

(20mm thick) in floor, treads of steps and landing on 20mm thick

bed of cement mortar (1:4) jointed with neat cement slurry mixed

57 15 with pigment to match the shades of the tiles including rubbing and 0.00 0.00

polishing etc. complete with cost, conveyance, royalties and taxes

of all materials complete in all respects as per direction of

Engineer-in-Charge.

Fixing granite tiles of approved dimension area above 0.1 up to

0.4 sqm (10mm thick) in Dados, treads of steps and landing on

12mm thick cement mortar (1:3) jointed with neat cement slurry

mixed with pigment to match the shades of the tiles including

rubbing and polishing etc. complete with cost, conveyance,

royalties and taxes of all materials complete in all respects as per

direction of Engineer-in-Charge.

Providing full body matt finish vitrified tile flooring using vitrified

tiles having thickness of min 10mm conforming to IS 13755 of

1200x600 (shade to be decided as per Ama Hospital scheme)

(homogeneous) of premium quality in floors, treads on steps and

landings on 20mm thick bed of cement mortar of mix (1:4) laid in

proper slope and gradient with screened and washed sharp sand

for mortar and fixing with neat white cement slurry,grouting the

joints with neat white cement slurry mixed with required quantities

of pigments of approved make to match the shades of the vitrified

tile if required , watering and curing for 21 days, including cost,

conveyance, loading, unloading, royalties and taxes of all

materials, cost of all labour,Labour cess , sundries, T&P required

for the work, complete in all respect as per specification and

direction of Engineer-in-charge.

Providing, fitting, fixing vitrified tiles of premium grade having

thickness 8mm to 10mm confirming to IS 13756 of size 600mm x

600mm Plain (Ivory) as directed by Engineer-in-charge in dados

skirting and risers of steps on 12mm thick cement plaster (1:3)

66 18 jointed with neat cement slurry mixed with pigment to match the 0.00 0.00

shades of the tiles including rubbing and polishing etc. complete

with cost, conveyance, royalties of all materials all labour,labour

cess complete in all respects.

Supplying, fitting & fixing of 8-10 mm thick & size of 600x600 mm

Anti-skid vertified floor tile of with veilcraft (VC/FT ) shield(

Scratch free/stain free) with water absorption limit between

0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid

on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand)

69 19 and filling joints with white cement of approved quality including 0.00 0.00

cost of all materials, labour T&P etc. required for the work all

complete as per direction of the Engineer-in-charge (for New Work

Supplying, fitting & fixing of 600mm x 300mm Ceramic wall tiles

having thickness 6.5mm to 7.0 mm confirming to IS 13753 in

dadoes, skirting and risers of steps laid on 12 mm thick cement

mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed

72 20 with pigment to match the shades of the tiles etc. complete 0.00 0.00

including cost of all materials, labour T&P etc. required for the

work all complete as per direction of the Engineer-in-charge

Supplying, fitting and fixing vetrified Industrial tiles in floors of

premium grade having thickness 8mm to 10mm of size 300mm x

300mm confirming to IS 4457 with colour / printed series of

approved on 20mm thick bed of C.M. (1:4) including cost of all

materials, labour, T&P etc. required for the work in all respect as

directed by the Engineer in charge.

Digitally signed by DIWAKAR

BoQ : CENTRE FOR INDIGENOUS KNOWLEDGE & LANGUAGE

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Providing & Fixinng factory made 100% Solid WPC ( Wood

Polymer Composite ) - Door Frame 125 mm x 65 mm Single

Rebated, made from Wood Polymer Composite ( Single Extruded

Process ) material comparising of virgin PVC polymer of K Value

57-60 ( Suspension Grade ), Calcium Carbonate and Natural

Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic

additives fabricated with meter Joints after applying PVC solvent

Cement & screwed with full body treaded star headed screws

with approved quality of 30mm thick BWR block board pasted with

1mm thick sunmica on both side of approved design and quality

including cost of all door fittings and fixtures etc. complete in all

80 23 respect as per the direction of the Engineer-in-Charge. 0.00

Factory made single leaf rigid FRP(alternately called GRP)

sandwich composite door shutter of 32mm thick laminated with two

GRP skins with wood grain finish fabricated using UV-stabilised

Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped

Strand Mat (CSM) impregnated with orthopthalic palyester resin.

The thickness of the skins shall not be less than 3.00mm

Expanded Polystyrone(EPS) structural foam panel of 29mm

thickness and a density of 20kg/cu.mtr shall be used as core

material. Wooden reinforcements made of seasoned sal wood

block of cross section not less than 28mmx32mm and also

necessary sal wood reinforcements for fitting the metal fittings

such as tower bolts, aldrops, handles etc shall be provided. A

83 24 structural adhesive compatible with (EPS) foam shall be used for

bending the core material, the sal wood reiforcements and the

skins. The material and process for manufacturing the door

shutters shall conform to RV-TIFAC composites Design Centre's

standards and specifications and the door shutters tested in

conformation to IS: 4020-1998. The finish of door shutter will be

plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood

or any other colour using high quality pigments. Three heavy

whight mild steel butt hinges type-I(ISI marked) size 100mm are to

be fitted on one side of shutter with FRP frame of size 45x90mm.

Supplying and fixing of Powder coated 50-60 microns approved

colour of Aluminium 40mm Casement series Door Unit with

suitable aluminium extrude profiles. the system is designed to

accommodate 12mm clear toughened glass of make-Saint

gobain/AIS/Gardian/modi. the rate quoted inclusive of hardwares

like antilift,roller, Espag lock cum handle,epdm gaskets,T mullion

,Fly Mullion ,bottom adopter ,mid transom ,glazing clip for 12 mm

glass felt along with all accessories etc complete. the gap between

the wall and window will be filled with silicon weather sealant in the

outer side. Casement Door Outer frame - 40mm x 45.3mm Series

x 1.4mm thickness, Fly mullion - 44 x 60 mm x 1.4mm thickness, T

Mullion 40 x 78.4mm x 1.4mm thickness, Transom - 40.28 x 125.8

x 1.75 mm thickness, Bottom adopter - 34.6 x 26 x 1.5mm

thickness, including cost of all materials, all labour, sundries, T&P

etc. complete in all respect as per direction of Engineer-in-Charge

Supplying and installing UPVC- 3 tracks sliding windows and 2

sashes (shutters) with ss mesh sash dimension of 58 mm x 32 mm

and sash dimension of 61mm x 37mm for windows with corners

fusion welded, fully reinforced with Galvanized steel of 1.2 mm to 2

mm. The sash will be fitted with 5mm reflective toughened glass of

make - Saint gobain/AIS/Gardian/modi . The windows must be

installed complete with all kinds of ironmongery (including EPDM

gaskets,bridging wedges and glass packers) and with suitable

water draining system. Application of Silicon sealant from Inside /

Outside of Dowcorning / GE or equivalent including cost of all

materials, all labour, sundries, T&P etc. complete in all respect as

per approved drawing & direction of Engineer-in-Charge

Digitally signed by DIWAKAR

BoQ : CENTRE FOR INDIGENOUS KNOWLEDGE & LANGUAGE

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S.

gates, garage door, collapsible gates with top and bottom rails,

steel windows, critical frames for windows, stair case and parapet

railing made out of M.S Square bar/ flat including stair case hand

railing with 40mm. dia G.I.pipe etc. including painting two coats

92 28 over a coat of redoxide primer as per approved drawing and

design with cost of all materials & labour, labour cess, T&P,

sundries etc. complete in all respect as per specification &

direction of the Engineer-in-Charge.

Priming one coat with wall cement primer (water bound) to make

an even finished surface in all floors and heights to wall surface of

approved make and shade including sand papering, applying putty

wherever necessary & cost of scaffolding, staging charges with

cost, conveyance, cost of all labour,labour cess T&P etc. complete

as per the direction of the Engineer-in-charge.

Wall painting two coats with Antifungal weather coat paint (1st

quality) exterior grade of approved make & approved shade over a

coat of primer to make an even finished surface in all floors and

heights with all scaffolding and staging charges including cost,

100 30 conveyance, cost of all labours, T & P, sundries etc. as required

for the work complete in all respect as per the direction of the

Engineer-in-Charge.

Finishing plastered surfaces of walls with cement based wall putty

(Water based) duly approved by Engineer-in-Charge) and

finishing the surface smooth and even by sand papering to receive

painting in walls, at all heights with staging wherever necessary

104 31 with cost, conveyance, cost of all labour,labourcess, all T&P etc.

required for the work complete in all respect as per the direction of

the Engineer-in-charge.

Painting two coats with plastic emulsion paint with a approved

quality primer to make an even finished surface in all floors and

heights to wall surface of approved make and shade including

sand papering, applying putty wherever necessary & cost of

108 32 scaffolding, staging charges with cost, conveyance, cost of all

labour,labour cess, T&P etc. complete as per the direction of the

Engineer-in-charge.

Engineer-in-charge.

Painting two coat with approved synthetic enamel paint to new

wood work over a coat of Red oxide primer including cost,

conveyances, royalties, taxes of all materials and cost of all labour

112 33 with T&P required for the work etc. complete as per specification &

direction of Engineer in charge.

Painting two coat with approved synthetic enamel paint to new

iron work over a coat of Red oxide primer including cost,

conveyances, royalties, taxes of all materials and cost of all labour

115 34 with T&P required for the work etc. complete as per specification &

direction of Engineer in charge.

Digitally signed by DIWAKAR

BoQ : CENTRE FOR INDIGENOUS KNOWLEDGE & LANGUAGE

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supplying, fitting and fixing of Stainless steel of 304 grade in hand

railing using 50mm dia of 2mm thick circular pipe with Balustrade

of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless

square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair

case as per approved design and specification, buffing, polishing

etc with cost, conveyance, cost of all labour,labour cess, T&P etc.

required for the work complete in all respect as per direction of the

Engineer-in-charge.

Supply and Installation of System comprises of Semi unitized

extruded aluminum Structural Glazing wall panels comprising of

extruded Vertical Aluminium mullions and Horizontal transoms

(JINDAL/HINDALCO/EQUEVALENT ) with super Durable Powder

Coating finish of minimum 60 Microns confirming standards to

withstand wind pressure. The mullions and transoms are installed

on locations as indicated in the architectural drawings. The

framing members provide no structural support for the building and

the Structural Glazing wall is deemed to be a lightweight façade

which is intended to separate the external from the internal of the

building and provides natural light into the building. The curtain

wall system is designed to have internal drainage system within

the extruded sections with 6MM Blue toughened glass. Gaskets

are employed as water barrier between the aluminum gridwork and

the glazed sashframe, which are fully drained in the event of

leakage past the primary seal. The external grooves are covered

with application of backer rod with weather sealant of approved

make as indicated in the concept drawing. Fabricating and

supplying Mild Steel ( HDG coated ) Brackets to accommodate 3

Dimensional movement for achieving perfect verticality and proper

fixing of structural glazing system with the RCC/

masonry/structural steel framework of building structure, using

stainless steel (chemical/mechanical) anchor fasteners/ bolts,

Teflon separator to prevent bimetallic contacts with nuts and

washers etc. of stainless steel Grade 316, of the required capacity

and in required numbers

Supply and Installation of 14 mm GRG Tiles steppe edge ceiling

tile of size 595 x 595 x 14 mm on the edge & 7 mm in the center

having all edges encapsulated with chemical treated paint &

having densified tegular edge ,weight 5 kg/m2 having random

circular semi perforated in dual diameter / Random fissure semi

perforated in variable length which is suspended by using 0.3 mm

thick and 15 mm wide pre coated metal T 15 grid system. The

technical parameters are as follows : Core - GRG Silicate, Fire –

Class 1 & P , Acoustics – NRC 0.5,Climate (degree C, RH) – 50,

99, STC - 30, Termite resistance ,Light reflectance – 85 %,Green

(RC %) – 25, Hygiene (VoC, Clean room) – Low, , Load capacity

(Kg) - Antisag. The T 15 Grid system of 600 x 600 mm module

shall include wall angle(WA 15) with unequal flanges of size 14 x

20 x 3000 mm wide, length 3000 mm, 0.43 mm thick fixed along

the perimeter of wall with the help of nylon sleeves and suitable

fasteners at 300 mm centers. Then suspend the Main T15 (MT15

W36) having flange width 15 mm /24 mm , height 32/38 mm and

length 3600 mm thickness 0.30 mm from the soffit with help of

soffit cleat and wire at 1200 mm c/c. Cross T15 (CT15 W12) with

flange width 15 mm, height 32 mm and length 1200 mm is then

interlocked into the pre-cut slots in the Main T15 at 600 mm

centers in the direction perpendicular to the Main T15. Finally,

Cross T15 (CT15 W06) having flange width 15 mm, height 32 mm

and length 600 mm are then interlocked into the pre cut slots in the

1200 mm Cross T15 at 1200 mm centers and in direction parallel

to the Main T15. GRG Tile of size 595 x 595 x 14 mm thick shall

be placed into the grid size of 600 x 600 mm. Ensure arrow marks

behind panels are oriented in one direction to achieve uniform

shade. Test certificate will be submitted after procurement of

Digitally signed by DIWAKAR

BoQ : CENTRE FOR INDIGENOUS KNOWLEDGE & LANGUAGE

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Providing and laying water proofing treatment in sunken portion of

WCs, bathroom etc., by applying cement slurry mixed with water

proofing cement compound consisting of applying : (a) First layer

of slurry of cement @ 0.488 kg/sqm mixed with water proofing

cement compound @ 0.253 kg/ sqm. This layer will be allowed to

air cure for 4hours. (b) Second layer of slurry of cement @ 0.242

128 38 kg/sqm mixed with water proofing cement compound @ 0.126 0.00

kg/sqm. This layer will be allowed to air cure for 4 hours followed

with water curing for 48 hours. The rate includes preparation of

surface, treatment and sealing of all joints,corners, junctions of

pipes and masonry with polymer mixed slurry.

Providing 2.5cm thick Grading Concrete over roof slab with

cement concrete (1:2:2) using 6mm size black hard granite

crusher broken chips and screened & washed sharp sand for

mortar and finished smooth to the rough surface of slab including

131 39 watering and curing with cost, conveyance, royalties of all

materials with cost of all labour, labour cess and T&P required for

the work etc. complete in all respect as directed by the Engineer in

Waterproofing application:- Providing and application of two

component polymer modified flexible cementitious waterproofing

coating at a thickness of 1.5 -2.5 mm The membrane should have

Elongation equal or more than: 30%

Crack Bridging ability : Up to 1 mm

Adhesive strength: 1.0 N/mm² @ 28d

Tensile elongation: 60% @ 20°C

Shore A Hardness >85 (between 3 - 7 days)

etc. as per direction of E.I.C (For longer span, in terrace panel of

4m*4m should be done by groove cutting, and filling with PU

135 Sub-Total of Civil Works TOTAL 1,36,09,458.08 34,43,102.88

136 DRAINAGE WORKS.

Earth work in excavation of foundation trenches in hard soil

including dressing of sides and levelling the bed up to the

required depth and depositing the excavated materials away

137 1 from the work site within 50m initial lead & 1.5m initial lifts with

sundries & T&P required for the work complete including cost of

all labour,labour cess,T&P,sundries etc. as directed by the

Engineer in charge.

Filling in foundation trenches and plinth, with excavated earth

including laying the earth in layers not exceeding 23.5 cm thick

ramming & watering with all leads & lifts including cost of all

labour,T&P completed as directed by the Engineer-in-charge.

Supplying and filling in foundation and plinth with good quality

river sand including watering, ramming with cost, conveyances,

140 3 royalties of all materials and cost of all labour with T&P required Cum 15.17 1595.71 24,206.98

for the work etc. complete as per specification & direction of

Engineer-in-charge

Cement concrete of proportion (1:4:8) in foundation and floors

using 4cm size clean hard black crusher broken granite stone

metal of approved quality and from approved quarry including

hoisting, lowering and laying concrete in layers not exceeding

141 4 15 cm. (6") thick to the required level ramming, watering, Cum 15.17 8335.87 1,26,455.21

curing etc. complete including cost, conveyance, royalties of all

materials with all labour and T&P required for the work etc.

complete in all respect and as per the direction of the Engineer-

Providing, lifting, hoisting and laying Reinforced cement

concrete of M-25 grade as per approved designs and drawings

having a minimum compressive strength (in work test) 250 Kg.

/ Square cm. in 15 cm. cubes at 28 days after mixing and test

conducted in accordance with I.S. 516 using 12 mm. to 20 mm.

size black hard crushed broken granite stone chips and screened

and washed sharp sand for mortar of approved quality from

approved quarry, washed and cleaned ( 20mm. size chips not

to exceeds 25 % ) to be mixed in concrete mixture with Portland

slag cement (PSC) including hoisting, lowering, laying and

compaction concrete by using vibrators, watering and curing for

142 5 28 days, centering and shuttering then after dismantling and

removing debris from the work site and finishing the exposed

surface smooth providing grooves or beads wherever necessary

including cost, conveyance, loading, unloading, royalties and

taxes of all materials and cost of all labours, sundries, T & P

required of the work etc. complete in all respect as directed by

the Engineer-in-Charge. But excluding cost and conveyance of

M.S. rods or Tor steel and binding wires and labour charges for

straightening, cutting, bending etc. of M.S. rods or tor steel

tying the grills and placing in proper position.

143 a Drain Bottom slab Cum 12.30 9780.08 1,20,294.93

Digitally signed by DIWAKAR

BoQ : CENTRE FOR INDIGENOUS KNOWLEDGE & LANGUAGE

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supplying Cutting, straightening coiled or bent up M.S. Rod or

tor steel of primary steel producers such as SAIL / TATA / RINL

/ JINDAL STEEL / SHYAM STEEL/ SEL Tiger (grade Fe-500D) etc.

including bending, binding, welding and jointing if necessary

and tying the grills and placing in position as required for R.C.C.

Work and for providing fan hooks as required, hoisting,

lowering, laying including cost, conveyances of M.S. Rod or tor

steel and binding wires of 18 to 20 gauge and labour required

for the work for bending, binding and tying the grills in all floors

with labour cess etc. (payment will be made on standard weight

of B.I.S. for M.S. Rods or tor steel only) etc. complete as per

specification & direction of Engineer-in-charge.

147 Sub-Total of Internal Drainage Works TOTAL 11,69,666.66 9,91,240.00

148 INTERNAL ROAD

Earthwork in excavation in hard soil for site leveling, foundation,

pits, trenches and other civil works upto and including 1.5metre

lift and stacking the soil upto a lead of 100 metre and including

149 1 dewatering, removing slush, shoring and strutting (as required),

complete as per specification and as directed by the Engineer-In-

Filling at all depth with available excavated earth (excluding

rock) in trenches, plinth, sides of foundations etc. in layers not

151 2 exceeding 15cm in depth: consolidating each deposited layer by 80.40 181.48 14,591.31

ramming and watering complete (lead upto 100m) as directed

by the Engineer-In-charge. Cum

Supplying of filling sand in foundation and over areas including

watering, ramming, consolidating and dressing, labours, tools,

taxes etc., all complete as per the specification and direction of

Engineer-In-charge. Cum

Loosening levelling & compacting original ground suppourting

embankment to facilitate a placement of 1st layer of

embankment up to a depth of 150mm mixed with water at OMC

& then and then compacted by rolling as per Clause 300.20 for

embankment construction as per Clause No- 305.3.4 of MoRTH

specifiction. Cum

Providing close graded granular subbase with Grading-lll

Providing and laying 80 mm thick factory made cement concrete

interlocking paver block of M-40 grade made by block making

machine with storng vibratory compaction of approved size,

155 6 design & shape, laid in required colour and pattern over and 300.00 717.91 2,15,373.60

including 75mm thick sand filling.as per drawing, specification

and direction of Engineer-In-charge.

Construction of cement concrete kerb with top and bottom width

115 and 165 mm respectively, 250 mm high in M 20 grade PCC

on M-10 grade foundation 150mm thick, foundation having

50mm projection beyond kerb stone, kerb stone laid with kerb

laying machine, foundation concrete laid manually, all complete

as per clause 408 Rmt

Providing & Painting with synthetic enamel paint of approved

brand and manufacture to give an even shade as per the

157 8 instruction of Engineer-In-Charge at all floors and all heights 80.00 222.78 17,822.72

including all material & labour complete.

158 Sub-Total of Internal Road Works TOTAL 6,83,132.47

159 Plumbing Works

160 A. SUPPLY & DRAINAGE PIPING & FITTINGS

161 WATER SUPPLY.

Supplying, installing, fixing, jointing, testing and commissioning of

approved make. Chlorinated Polyvinyl Chloride pipes (CPVC)

SDR.11 pipes confirming to ASTM standards with necessary

fittings for inetrnal toilet water supply upto 50 dia , and above

50mm dia pipe schedule 80 with fitting shall be schedule 80

ASTM IPS. The fittings and specials such as tees,

elbows,couplers, bends, enlargers etc.,m with CPVC brass

threaded combination / transition specials such as male adapters

brass threaded female adapters, brass FPT Tee, Brass FPT elbow

etc., where connection with metal is to be made including

necessary drilling holes, chasing walls and making the same good

162 1 in cement martor 1:1 restore the same original condition neately as 0.00 0.00

directed by the Engineer in-charge. Joints to be made with CPVC

solvent cement up to 50mm dia as per ASTM D-2846 and above

50mm dia primer P-70, and solvent confirming to ASTM F-4931 /

724 All exposed pipe shall be painted with latex paint. (for shafts,

basement ceiling ringmain Terrace & PRM).The rate shall include

necessary GI supports, GI grip bolts, angle brackets, hangers,

supports as with suitable GI U-clamps, bolts, nuts and washers

etc., The clamps shall be painted with two coats of enamel

(approved) paint over a coat of primer etc., complete

163 1.1 GROUND FLOOR

Digitally signed by DIWAKAR

BoQ : CENTRE FOR INDIGENOUS KNOWLEDGE & LANGUAGE

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

25 mm dia C-PVC pipe SDR.11

Providing all materials, labour, T&P for fitting & fixing of following

CPVC Ball Valves(CTS Sockets) confirming to IS-15778 with ISI

mark as per ASTM D-2846 in all floor & fixing with the pipes after

cutting the pipes to required shape & size including wastage etc.

170 2 of following nominal diameter, all complete including testing the 0.00

joints with required water pressure.The cost inclusive of

transportation scaffolding etc. all complete as per specification

excluding GST and direction of Engineer-in-charge.

171 a 25 mm dia CPVC ball valve Each 8 637.78 5,102.20 0.00

172 b 32 mm dia CPVC ball valve Each 5 816.78 4,083.92 0.00

Supplying, installing, testing and commissioning butterfly valves

with standard lever confirming to IS 13039 with necessary

173 3 connecting fittings like flanges ,nuts and bolts etc., complete. 65 Each 1 4796.35 4,796.35 0.00

174 DRAINAGE PIPE 0.00

Supplying all materials, labour, T&P and cutting holes through

existing brick work including making good the damages in cement

mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and

175 4 fittings etc. all complete as per P.H. specification and direction of 16 1,248.64 0.00

Engineer-in-charge. 250 mm thick wal

Supplying all materials, labour, T&P and cutting hole in R.C.C

floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C

176 5 pipes and fittings etc and repairing the holes after insertion of 14 3,778.12 0.00

pipes etc with cement concrete (1:2:4 ) including finishing

complete so as to make it leak proof as per direction of the

Engineer-in-charge.

Supplying, fitting and Outing of PVC pipes as per

(IS:4985-2000) with heavy duty solvent cement (manufacture's

made) joint for basin and sink waste Class-3 (6 kg/sqcm) with

necessary fittings like bends, tees, reducers, sockets etc. &

177 6 specials viz. MS clamp as per design, screws with washer 0.00

includuing cutting holes in floor & walls & making good the

same, cutting chases & filling the same with PCC (1:2:4) & then

cement morter (1:6)

Supplying, fixing and testing PVC soil, waste, Rain and vent pipes

(SWR) supreme confirming to IS13592 : 2013, type B with rubber

ring/Solvent (confirming toIS5382) joint inclusive of allnecessary

specials like bends, tees,offsets, door bends, junctions, cowls,

etc.,laid underfloor/ fixed on walls,and in pipe shafts etc.,

180 7 complete.The rate shall include necessary GI supports, GI grip

bolts, angle brackets, hangers, supports as with suitable GI U-

clamps, bolts, nuts and washers etc., The clamps shall be painted

with two coats of enamel (approved) paint over a coat of primer

etc., complete.

Providing ,fixing , testing and commissioning of approved make

183 8 PVC vent cowl with necessary accessories etc., complete

185 B. SANITARY FIXTURES.

Supplying all materials, labour, T&P and fixing the following

vitreous china Wash Down Water Closet (European type W.C.

pan) with integral 'p' or 's' trap to the floor with wooden plug and

chromium plated pedestal screws including jointing the trap with

soil pipe in cement mortar (1:1) fixing plastic seat and cover for

wash down water closet with chromium plated brass hinges and

186 1 rubber buffers including polishing etc all complete as per Each 12 6679.98 80,159.76

specification and direction of the Engineer-In-Charge. (EWC with

Wall Hung Cistern, Drainage L Bend Pipe, Gasket and Installation

Kit with PP normal close seat cover, Hinges, Fixing Accessories

and Accessories set, Size: 350x480x395 mm, STrap)

Supplying all materials, labour, T&P and fixing Health Faucet

complete with Chromium plated brass brackets fixed to wooden

187 2 plugs with Chromium plated brass screws as per specification and

direction of the Engineer-In-Charge.

Digitally signed by DIWAKAR

BoQ : CENTRE FOR INDIGENOUS KNOWLEDGE & LANGUAGE

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long

Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) Each 14 2608.39

Supplying all materials, labour, T&P and fixing standard sized Two

way Bib cock etc complete including cutting the wall and making Each

Supplying all materials, labour, T&P and fixing standard sized

Long way body bib cock etc complete including cutting the wall

and making good the damages, including cost of all materials

190 4 complete as per PH specification complete as per direction of Er-in- 14 2315.04 32,410.59

charge. 15mm dia CP Two way bib cock with Flange.

Supplying all materials, labour, T&P and fixing standard sized

concealed stop cock etc complete including cutting the wall and

making good the damages, including cost of all materials complete

191 5 as per PH specification complete as per direction of Er-in-charge. 14 1698.37 23,777.24

15mm dia CP Two way bib cock with Flange.

Supplying all materials, labour, T&P and fixing standard sized

Chromium Plated brass Towel Rail complete with Chromium

Plated brass brackets fixed to wooden plugs with Chromium

Plated brass screws as per specification and direction of the

Engineer in charg

C.P. Soap Dish holder.

Supplying all materials, labour, T&P and fixing standard sized

Robe Hook of complete with all as per specification and direction 14 924.61

of the Engineer in charge.

Supplying all materials, labour T&P and fixing of Under Counter

wash basins in all floor of approved quality including cutting the

walls & floor and making good the damags with cement concrete

196 10 e.t.c including all tsxes,duties,transportation e.t.c. All complete as

per specification and direction of the Engineer-In-Charge.

190X550X430 MM Wash Basin

Supplying all materials, labour T&P and fixing of Waste coupling

198 11 32 mm size Half thread with 80mm height (Half Threaded) 11 728.77 8,016.45

Supplying all materials, labour, T&P and fixing mirror of superior

glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed

to wooden plugs with CP screws and washers complete as per

specification and direction of the Engineer-in-charge. 11 970.90 10,679.94

600mmx450mm size B.E.mirror

Supplying all materials, labour, T&P and fixing standard sized pillar

cock of Hindware/Jaquar/Parryware of approved make etc

complete including cutting the wall and making good the damages,

200 13 including cost of all materials complete as per PH specification 11 2197.16 24,168.76

and direction of Engineering-in-charge. 15mm dia fus Jaquar,Cat

Supplying all materials, labour, T&P and fixing standard sized

Chromium Plated soap dispenser complete with Chromium Plated

brass brackets fixed to wooden plugs with Chromium Plated

201 14 brass screws as per specification and direction of the Engineer in 5.5 5298.79 29,143.35

charge. soap dispenser jaquar ACN-1137N

Supplying all materials, labour, T&P and fixing standard sized

15mm dia angular Stop cock complete including cutting the wall

and making good the damages, including cost of all materials

202 15 complete as per PH specification complete as per direction of Er-in- 26 1471.46 38,257.96

charge. 15mm dia CP angle stop cock with wall flange .jaquar,Cat

Matrix Set-1 (Wash Basin 46x36 cm with one pair mounting

brackets, EWC & cistern complete with fittings & seat cover, one

203 16 no hinged rail 76 cm and 4 nos of grab rail 60cm) 2 76546.60 1,53,093.20

Overhead shower 120 mm Round shape Multi Flow (ABS Body)

chrome plated with Gray Face Plate)with Rubit Cleaning System.

15 mm dia C.P revolving shower with arm

Supplying and installing ARISTO Plastic Dustbin Black 120 L with

Lid & Wheel, weight-7.5kg,Size (HxWxD-980x490x550mm),

Digitally signed by DIWAKAR

BoQ : CENTRE FOR INDIGENOUS KNOWLEDGE & LANGUAGE

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supplying, fixing and testing PVC muilty floor trap without SS

frame and cover 75mm dia outlet fixed on a bed of cement

concrete with (Heavy duty type) etc., complete

Supplying, fixing and testing PVC Nahani floor trap without SS

frame and cover 75mm dia outlet fixed on a bed of cement

concrete with (Heavy duty type) etc., complete.

209 22 Supplying, fixing SS floor trap grating . 21 548.70 11,522.70

210 A.II EXTERNAL P.H. & SANITARY WORK.

Supplying, fixing and testing PVC soil, waste, Rain and vent pipes

(SWR) supreme confirming to IS13592 : 2013, type B with rubber

ring/Solvent (confirming toIS5382) joint inclusive of allnecessary

specials like bends, tees,offsets, door bends, junctions, cowls,

etc.,laid underfloor/ fixed on walls,and in pipe shafts etc.,

211 1 complete.The rate shall include necessary GI supports, GI grip

bolts, angle brackets, hangers, supports as with suitable GI U-

clamps, bolts, nuts and washers etc., The clamps shall be painted

with two coats of enamel (approved) paint over a coat of primer

etc., complete.

Earthwork in excavation in all types of soil for 200mm dia site

leveling, and forming the bottom surface foundation, pits, trenches

and other civil works upto and including 1.5metre depth and

stacking the soil upto a lead of 100 metre and including

dewatering, removing slush, shoring and strutting (as required), 80 259.60 20,768.00 0.00

complete as per specification and as directed by the Engineer-In-

Supplying all materials, labour, T & P and constructing Gully Trap

chamber of the following inside size with 8 cm thick R.C.C. precast

cover slab in CC (1:2:4) mix using 12mm size h.g. chips,

foundation concrete (1:4:8) using 40mm size h.g. metal on bed

aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside

215 3 12mm thick cement plastering (1:3) finished with a floating coat of 0.00

neat cement including fixing 100mm x100mm size gully trap,

150mm x150mm C.I gratig etc. all complete as per aproved

drawing, specification and direction of Engineer-in-charge.

216 a 300mmx300mm with RCC cover Each 7 2220.05 15,540.36

Supplying all materials, labour, T & P and constructing of

Inspection chamber of the following inside size with 8 cm thick

R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g.

chips, foundation concrete (1:4:8) using 40mm size h.g. metal on

bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside

217 4 12mm thick cement plastering (1:3) finished with a floating coat of

neat cement including fixing 100mm x100mm size gully trap,

150mm x150mm C.I gratig etc. all complete as per aproved

drawing, specification and direction of Engineer-in-charge.

Inside size 900mm x800mm x450mm with Cast iron Manhole Each

OPEN WELL SUBMERSIBLE PUMPS FOR DOMESTIC WATER

219 TRANSFER FROM UGR TO OHR 0.00

Supply, installation, testing and commissioning Open well

submersible pump of required drive (Motor HP), having

discharge capacity and pumping head as described below with all

electrical accessories viz.main switch and starter, auto on/off

220 1 system with float arm (with fixed or flexible arm), over load 0.00 0.00

protection relay, power cable and control cable from main switch

and starter with auto on-off with dry running protection to

respective motors, earthing having required M.S. galvanised

supporting stay/ clamp etc. complete operational.

221 a RPM : 2900 (LOCATED AT UGR ). EACH 1 97,296.90 0.00

222 A. 10 KLD DOMESTIC WATER UGR TANK AND PUMP HOUSE 0.00

Earthwork in excavation in hard soil for site leveling, foundation,

pits, trenches and other civil works upto and including 1.5metre lift

and stacking the soil upto a lead of 100 metre and including

223 1 dewatering, removing slush, shoring and strutting (as required), 0.00

complete as per specification and as directed by the Engineer-In-

Filling in foundation trenches and plinth, with excavated earth

including laying the earth in layers not exceeding 23.5 cm thick

226 2 ramming & watering with all leads & lifts including cost of all 16.09 2,920.08 0.00

labour,T&P completed as directed by the Engineer-in-charge.

Digitally signed by DIWAKAR

BoQ : CENTRE FOR INDIGENOUS KNOWLEDGE & LANGUAGE

Abs. Schedule Non-Schedule

Head Description of Item Unit Qnty. Schedule Schedule Amount

Sr. Rate Amount

Supplying and filling sand in foundation and over areas including

watering, ramming, consolidating and dressing, labours, tools,

227 3 taxes etc. all complete as per the specification and direction of 1.52 1595.71 2,425.49 0.00

Engineer-In-Charge.

Providing and laying plain cement concrete 1:3:6 (1 cement: 3

sand: 6 stone agregate 40mm nominal size) as levelling course

228 4 in foundation and plinth etc. including tempering, curring 1.52 8812.12 13,394.43 0.00

,shuttering etc.complete all depth and height

Providing, lifting, hoisting and laying Reinforced cement concrete

of M-25 grade as per approved designs and drawings having a

minimum compressive strength (in work test) 250 Kg. / Square cm.