Spl repair to Bldg No P-163 (OR Md Accn ) at BS Marg alongwith Spl repair to Bldg No P-96 (JCOs Md Accn ) at Sanjay Vihar of AFMSD Lucknow under GE (East) Lucknow.

Demolition of cement concrete (unreinforced) in any position n.exc 15 cm thickness below and above ground level, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position as in roofs, floors (other than ground floors) and similar works.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles.

M & L for brick work using old size fly ash brick, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.

Ditto all as item No 4 above but except bricks (Using bricks recd in demolition)

M & L for brick work with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

(d) All as per srl item No 124 here-in-before but one 3 pin socket outlet, 05 Amps, independent with cable 1.5 Sq mm size.

(e) All as per srl item No 124 here-in-before but one 3 pin socket outlet 05 Apms point on the same board with other switches with cable 1.5 Sq mm size.

Ditto as per item No 165 above but 10 watts and system efficacy 105 lm/watt or above..

M&L for Self Curing Ready Mix Plaster of thickness 12 mm to 15 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on external surfaces of walls, chajja, facia at any height with necessary scafolding surface finished even and smooth including taking down cement or cement lime plaster, raking out joints and preparing for plastering the wall surface with white cement based polymer modified including disposal of rubbish, all complete as per the direction of Engineer-in-Charge.Make-JKCement /Birla/ Ultratech.

M&L for Self Curing Ready Mix Plaster of thickness 10 mm to 15 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on Internal surfaces of walls, at any height with necessary scafolding surface finished even and smooth including taking down cement or cement lime plaster, raking out joints and preparing for plastering the wall surface with white cement based polymer modified including disposal of rubbish, all complete as per the direction of Engineer-in-Charge.Make-JKCement /Birla/ Ultratech.

Supply only integral water proofing compound, ISI Marked.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.

M & L for Providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting.

M&L for preparation of newly plastered surfaces of ceiling & applying three coats of white wash, complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceilling and applying one coat of white washing on ceilling complete all as specified and directed.

M & L for preparation of old previously treated surfaces of walls and applying one coat of white wash on walls complete all as specified and directed.

M&L for applying three coat of white wash including preparation new plaster surface on wall, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F coloured non skid edge cut (joint free) ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm, in floors etc set and jointed in white or coloured cement to match laid over 15mm thick screed in CM 1:4 complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new surfaces. as per authorised applicators only.

M&L for glazed ceramic tiles (coloured) 350x 250x 7 mm/ 450X 350X 7mm /450 x 300 x 7 mm thick on vertical surfaces joint free tiles such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete all as specified and as directed.

Dismantling of stone slabs and tiles laid in bedded cement mortar of any description or thickness in floors, aprons etc, complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over 15mm screed bed (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and including granite polish on Kota slab stone complete all as specified and directed by Engineer-in-charge.

Supply and fixing ceiling fans 1200 mm sweep, BEE star rated 5 with brush less direct current (BLDC) motor, class of insulation B, 3 Nos blades, up to 90 cm long down rod, canopies, shackels, kit, safty rope, copper winding, power factor not less then 0.9 service value ( CM/M/W) min 6.00, air delivery min 210 cum/min, 350 RPM ( tolerance as per IS: 374- 2019) THD less then 10 % remote unit for speed control and all remaining accessories incl safty pin, nut bolts, washers , tempr rise 75 degree C (max) , insulation resistance more then 2 mega ohm, suitable for 230 V, 50 Hz complete. .

Excavation in trenches soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of pipes/cables etc getting out and bottom surface to required gradient complete .

M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

Forming construction joints 30 mm deep x 10mm wide filled with sealing compound grade "A."

M&L for 16-18 mm thick granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills, cooking platforms & like, over 20mm thick screed bed in cement mortar (1:4) including pointing into white cement/matching grauting Compound (1:2) using marble dust with admixture of pigment to match shade of granite, complete all as specified and directed.

Rounding to edges of stone slabs a full bullnose rounded one edge, such as in steps, cooking plateform incl making hole for gas pipe and other similar situation complete all as directed.

M&L Supply and laying of 3mm thick (Minimum) polymeric water proofing membrane weighing not less than 3 Kgs/Sqm laid on a coat of bitumen primer @ 0.30 to 0.50 kg per Sqm for sunken treatment including old demolition of sunken treatment.

Taking down loose filling of aggregate in any form from sunken slab and refiiling after treatment.

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.

Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.

M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls.

Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

Fixing only 15mm bore tubes "medium grade " galvanised with all fittings and fixed complete to walls and ceilings or laid in floors.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

Fixing only 20mm bore tubes "medium grade " galvanised with all fittings and fixed complete to walls and ceilings or laid in floors.

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified.

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified. Make : Commander, CERA, Pearl, Parryware Slimline

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink.

S & F for stainless steel kitchen plate rack of overall size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.63 mm thick fixed with rawl plug and CP steel screws complete, all as specified and directed. Make : Blue Star (Silver Shine), Diamond, Nirali, Prayag.

S&F CP grating 125mm dia with waste hole complete all as specified & directed.

S&F CP grating 125mm dia without waste hole complete all as specified & directed.

S&F PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified & directed.

M & L Removal of surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete .

…Ditto .. as in item No 25 above but except stone.

…Ditto .. as in item No 25 above but on vertical surface such as dado, skirting etc over 10 mm thick skirting in CM 1:4 … Ditto…all as specified and directed by Engineer-in-charge.

S&F in repairs long body 15mm bore bib tap, fancy type, chromium plated, cast copper alloy, with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F in repairs CP angle valve, fancy type long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate complete all as specified & directed.

S&F in repair 15mm bore concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union all as specified.

S&F 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor, complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified. Make : Prayag, Pumber, Mark.

Dismantling RCC/PVC water tanks and removing for capacity exceedin 250 litres & not exceeding 500 litres etc., all as directed.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks, white colour, Triple layered (cylindrical, vertical with closed top) hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete, all as specified and directed.

S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, all as specified. Make: Pryag/Polytuf/Jindal.

S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore, all as specified and as approved by GE/Engineer-in-Charge.

S&F PVC coated 25mm dia Mild steel pipe as in curtain rods includin brackets and fancy type end knobs, complete, all as specified and directed.

Demolition and breaking up or taking down PVC/AC/CI/SSW 100mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding, complete.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.

S & F PVC (SWR) floor trap of size 110/110mm, complete all as specified and directed.

S & F for 110mm PVC (SWR) WC connector bent type, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend, any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend, any radius with access door, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend, any radius, complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each, complete, all as specified & directed.

Taking down chowkhat with shutter (without taking off shutter from the

frame) and area not exc 1.5 sqm each, complete, all as specified & directed.

S&F 2nd class hard wood plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

M&L plain cement concrete cast in situ 1:3:6 type C1 using 20 mm graded stone aggregate as in copings, hold fast, back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as spcefied and directed

S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc. complete all as spcefied and directed

S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast, etc.complete all as spcefied and directed

S&F for 30mm thick factory made flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, complete all as spcefied and directed .

S & F for 35mm thick factory made glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

M&L for in repair block board, 19/20mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work as in cup board shutter/shelves/cabinet etc, complete, all as specified and directed.

M&L for 0.90mm thick decorative laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per makers instructions complete, all as specified and directed.

S&F in repair kitchen cabinet shutter with frame including shelves, drawer made of solid PVC Block board18/ 19 mm thick one sides decorative face and balance side white having smooth outlet integral skin are made and shall be fixed to walls using required size sheet metal screw and solvent adhesive vertical and horizontal profile made of PVC 18/19mm solid board profile complete all as specified by manufacturer instruction complete, all as specified and directed.

M&L for external teak wood lipping, 6mm thick fixed with nail, complete all as specified and directed.

M&L magnet ball catcher for cup board shutters, complete all as spcefied and directed.

S&F for clip type stainless steel self closing hinges for cabinets fitted with cadmium coated screws all as specified and directed. Make - HETTICH

M & L for 100mm size stainless steel fancy type handle, complete all as specified and directed.

S & F for 100 mm long Hasp & staple, safety type, Stainless steel with mild steel hinges pin including bolt to hinges plate & fixed with screw, complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge, complete all as specified and directed. Note: For WPC frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made The work for wpc frame shall include the following and rates quoted by bidder shall include same. (aa) The work pertaining to wpc frame shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like WPC frame, SS screw etc after approval by the GE. (ab) The contractor shall upload with the documents under cover-I "Memorandum of understanding"(MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected.

Providing and fixing factory made single extruded WPC prelam (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter with 2 mm thick edge moulding tape or 90 degree edge bend finish and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, and 4 no. stainless steel butt hinges all as per direction of Engineer-In- Charge. The work for wpc shutter shall include the following and rates quoted by bidder shall include same. (aa) The work pertaining to wpc shutter shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like WPC shutter, SS screw etc after approval by the GE. (ab) The contractor shall upload with the documents under cover-I "Memorandum of understanding"(MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected.

S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified.

S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified.

S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified

S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified.

S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.

S& F of windows / Vintelator made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick "D" Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyed backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52x25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10 mm square guard bars with 6"(152.4mm) pitch, complete for finished item of work including of all taxes.

Dismantling of steel windows/ventilators withot taking off shutters, complete all as specified and directed.

S&F mild steel framed work such as grills, guard bars, barred iron doors, cooler stand, framework of water tanks and similar works, conforming to Grade E-165 (Fe 290), including welding

etc. complete all as specified & as directed.

M & L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work. as per authorised applicators only.

S&F for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples all as specified.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc.

M&L for cement concrete (1:3:6) type C1 using 20 mm graded crushed stone aggregate as in surface channels, drains, coping and benching including necessary formwork whrever required. Note : Forming fair finished channel for drain using extra cement shall be measured and paid for separately.

Dismantling of stone slabs and tiles laid in dry of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for 60mm thick pressed precast concrete interlocking paver block reflective type, rubber moulded coloured of M-35mm grade over 25 mm thick sand cushion as in floors complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed

M&L for Self Curing Ready Mix Plaster of thickness 5mm to 8 mm , pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on Internal surfaces of Ceiling, chajja, facia at any height with necessary scafolding surface finished even and smooth including taking down cement or cement lime plaster, raking out joints and preparing for plastering the wall surface with white cement based polymer modified including disposal of rubbish, all complete as per the direction of Engineer-in-Charge.Make-JKCement /Birla/ Ultratech.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Ditto but excet paver block.

M & L for sand filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Dismantling brick tiles or terracing tiles, single layer of roofs complete all as specified and directed.

Striping out old roof treatment (tarfelt) from roof top and removing from site, complete all as specified and directed.

M&L PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in roof kerbs / benching / coving and roof padding over roof surfaces /sunken treatment etc rounded or chamfered on edges, complete all as specified and directed.

M & L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) 10 mm thick plastering in CM (1:4) using 100 % coarse sand on roof / parapet walls with WPC @ 2 % by weight of cement. (b) Applying a coat of bitumenous primer @ 0.50 Kgs/Sqm on prepared surfaces and allow to dry. (c ) Applying a coat of hot blown bitumen 85/25 grade @ 1.20 Kgs/Sqm over primer. (d) Suply and laying of 3mm thick (Minimum) polymeric water proofing membrane weighing not less than 3 Kgs/Sqm. (e) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kgs/Sqm . (f) Blinding with dry coarse sand @ 0.50 to 1.0 Kg /Sqm dusted over bitumen. (g) Suply and laying Sub class B Bricks tiles 40 mm thick over and including 15 mm thick screed bed in CM(1:4) and jointing and pointing in CM (1:4) by mixing linsead oil @ 5 % weight of cement. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.

All as per above item but except (g) on vertical surfaces.

Fixing only 15mm bore tubes "medium grade " galvanised with all fittings and fixed complete to walls and ceilings or laid in floors.

M&L for glazed ceramic tiles (coloured) 600x300x7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

Taking down carefully aluminium point wiring with PVC casing capin and conduit (light, fan, socket or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets as required.

S&F in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipes, complete all as specified & directed.

S & F for 5 mm thick glass Corner shelf 300mm with chromium plated guard, fixed with brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repairs CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm ( Phase,- Red , neutral- Black) and earth continuity conductor 1.5 sqmm (green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia, ISI marked ivory colour with all conduit fittings / fixing accessories for the following points:- (a) One light/ fan (CF & EF) point controlled by one switch.

(b) All as per srl item No 124 here-in-before but one bell / buzzer point controlled by one bell push button on the same board with other switches or independent with cable 1.5 Sq mm size.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm ( Phase,- Red , neutral- Black) and earth continuity conductor 2.5 sqmm (green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories for 3 pin 16 amps socket outlet point controlled by one switch.

Each Set

Taking down DBs any type and size including MCBs removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc.

Supply and fixing in repairs Modular switch 1 way 6A, 1 module complete

Supply and fixing in repairs Modular Bell push 6A 1 module complete

Supply and fixing in repairs Modular switch 1 way 16A, 1 module complete

Supply and fixing in repairs Socket, 6A - 2/3 pin combined 2 module complete

S&F in repairs Socket 6A/16A - 2/3 pin combined 2 module complete

Supply and fixing in repairs Fan step regulator, 120W - 2 module (Modular type suitable for BLDC ceiling fan) complete.

Supply and fixing in repairs Modular switch 2 way 6A, 1 module complete .

Supply and fixing in repairs white cover plate with frame modular type of 03 module complete .

Supply and fixing in repairs white cover plate with frame modular type of 04 module complete .

Supply and fixing in repairs white cover plate with frame modular type of 06 module complete .

Supply and fixing in repairs white cover plate with frame modular type of 08 module complete .

Supply and fixing in repairs bell, AC, 230 volts, single pole multimusic complete.

M&L for non skid coloured ceramic tiles, joint free 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm joint free non skid tiles. in floors with borders, incl over 15mm thick screed bed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors complete all as specified and directed.

S&F angle type holder insulated body with back plate suitable for batten fittings complete.

Renewal of submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable using colour coding drawing into and including concealed rigid non metallic PVC conduit 20 mm dia, medium grade, ISI marked ivory colour along with accessories of nominal sizes 2x4 sqmm + 1x4 sqmm earth wire complete.

Renewal of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete .

Renewal of submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable using colour coding drawing into and including concealed rigid non metallic PVC conduit 25 mm dia, medium grade, ISI marked ivory colour along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth wire complete.

Renewal of submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable using colour coding drawing into and including concealed rigid non metallic PVC conduit 20 mm dia, medium grade, ISI marked ivory colour along with accessories of nominal sizes 2x2.5sqmm + 1x2.5 sqmm earth wire complete.

Supply and fixing of RCCB 40 Amp/ 30mA , AC, 240 volts constant monitoring, Detecting imbalance, enhanced eletrical safty, reliable protection incl with test button complete .

S&F of exhaust fan single phase, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm incl Cutting, opening circular/Rectangular in shape hole on wall for fixing of exhaust fan of size 300 mm sweep incl plastering and making good the disturbed surface surrounding complete.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten(2 feet) 10/12 W, 6500 K, 230V ,120 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete.

S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, (B-22/E27 base), with 01 No. 9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements complete.

M&L for preparation of new steel surface of any d

S&F Fresh air fan of size 200 mm sweep PVC body complete with louvers connection up incl suitable size three core flexiable copper cable from ceiling rose to Fresh air fan as required.

Supply and fix LED bulb 9 watt complete .

Supply and fix modular type blanking plates, one moudle complete .

Taking down electric meter and refixing on new b

oard after rewiring in replacement of unservicable complete.

S&F Modular White cover plate with frame,2 module complete

S&F Modular Metal flush box 8 module complete

S&F Modular Metal flush box 4 module complete

S&F Modular Metal flush box 3 module complete

S&F Modular Metal flush box 2 module complete

Supply and fix 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75000 buring Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as perIEC 61000-4-5 complete.

(c) All as per srl item No 124 here-in-before but one light point controlled by two, two way 06 Amp switches with cable 1.5 Sq mm size.

S&F Calling bell , AC, 230 Volts, single phase complete

Supply and fix in replacement of AC modular box with modular 20 Amp MCB SPN suitable for Geyser and AC complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete.

Renewal of MCB distribution board VTPN , 4 way, powder coated CRCA steel sheet suitable for MCCB incomer 125 Amp , 4 way 415 volt degree of protection IP 43 -Ik-09 with double door, recessed mounted having 250 amp insulated tinned copper bus bar , neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plate, in unused spaces wherever required comprising of the following:- Incoming:- one number MCCB, 125 Amp, 04 pole, AC, 415 Volt, 50 Hz 16 KA ( Icu=Ics), thermally adjustable between 70 % to 100 %. Outcoming:- Twelve numbers MCB, SP, AC, 240 volt, 50 Hz, 10 KA, 32 A, 'C' series ISI marked.

M&L for preparation of new steel surface of any d

S&F bell push , AC, 230 Volts, 1 module complete

Taking down carefully ceiling fan of any sweep complete with all accessories, dismantling blades and deposit in safe custody of AGE E/M Yard-II for BER procedure complete.

Renewal of decorative wall mounting type LED light fitting, 1 x 15 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, 9/10 Watts LED lamp B22 CDL complete.

Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete .

Supply and fixing in replacement LED Bldg security light fitting LED 45 watt with SPD, PF not less or equal 0.9,epoxy coated cover sheet aluminium housing with heat resistant toughtened glass & IP 66 incl with bracket, clamps, nuts, bolts protection complete.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete.

Renewal of MCB, SP, AC, 240 volt of 06 to 32 Amp capacity "C" Series, ISI marked, incl making connections by using suitable copper lugs as required.

M & L Returning filling in including spreading leveling watering and well ramming in layers each not exceeding 25 cm thickness complete.

Supply and fixing of stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC, vertical type, working pressure min 0.8 Mpa with ,multi function safety valve and PUF insulation including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer, water connection complete.

Renewal of LED surface mounted batten 20 watt, powder coated die cast/ extruded polycarbonate body or CRCA sheet body (Thickness ≥ 1.20 mm) and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50 Hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5%), life time (LED Driver & electrical circuitary), of minimum 50000 burning hours with 70% of initial Lumen maintained till life ends, CCT 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect including connections with suitable size FRLS, PVC insulated copper conductor cable and earthing etc as required with Minimum 5 year OEM warranty. System lumen efficacy 120 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).