PROVN OF FLOOR TILLING IN BLOCK NO P-20 P-21 SMQ AT AF CAMP NARAINA, PROVN OF CHAIN LINK FENCING AT OMQ AT AF STN DHANSA, SPECIAL REPAIRS TO BOREWELLS AT AF CAMP NARAINA, PROVN OF SHED AND HARD STANDING FOR CAFETERIA AT AF STN RAJOKRI SPECIAL

Amount

B/R Works Demolition of plain cement concrete in any floors and paving not exc 15 cm thick above or below ground level including tiles if any

M&L for excavating in post holes (or similar holes) each n.exc 0.5Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25CM, watering and removing surplus soil a distance not exc 50m and making good surface in soft and loose soil complete all as specified.

M&L cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified.

M&L for cement concrete 1:4:8 type D-2 (using 40mm gde agg) as in foundation or sub base and mass concrete etc complete all as specified and directed by Engineer-In-Charge

M&L for cement concrete type B-1 (1:2:4) with using 20mm graded stobe aggrgates) as in surface channels and drains

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan to any radius in half brick thick wall built in cement mortar (1 : 4) complete all as specified & as directed.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landing balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for use and waste form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar works, not exceeding 200mm thick for rough finished in flat surfaces of concrete complete all as specified and directed.

M&L for use and waste form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs, sides of RCC/PCC bands in walls, horizontal or sloping and similar works exc 5 cm but not exc. 10 cm wide for rough finished surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

S&F plain fillets , square, rectangular or triangular in section clean sawn secured with nails or brads IInd class HW sectional area exc 13 Sqcm & n.exc 25 sqcm

M & L preparing new wood or wood based surfaces of any description N.exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel bright finish electrogalvanised 20mm width of flap complete all as specified.

S&F in repair 18/19 mm thick prelaminated particle board interior grade prelaminated both side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work .

S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick plastering in CM 1:4 on brick or concrete surfaces and finishing the surfaces even and fair without using extra cement complete all as specified

M&L10 mm thick rendering in Cm 1 : 4 on fair faces of bricks or concrete surface including finishing the surfaces even and fair complete all as specified.

M&L for 15 mm thick rendering on fair faces of brick or concrete surface including finishing the surfaces even and fair in CM 1:4 with using Water proofing compound @ 3% by wt of cement etc complete all as specified and directed by Engineer-In-Charge. Nots : WPC shall be measured and paid seperately

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two coats of Oil Bound distemper over one coat of primer complete all as specified.

M&L for preparation of new plastered surfaces of wall & ceiling and applying two coats of OBD over a layer of birla wall putty for smooth the wall and ceiling surface complete all as specified and directed

M&L 5mm thick cement plastering in CM 1:3 on ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified

Surface Excavation in any type of soil n exc 30 cm deep and averaging 15 cm deep and getting out any type of soil complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in sub base of floors.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooring etc complete all as specified and as directed

M&L for Providing 100 mm thick PCC (cement concrete) 1:2:4, type B-2 (using 40 mm graded aggregates) as in hardstanding/ ramp /path Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green Complete all as specified and directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for bedding of tiles complete all as specified and as directed.

M&L for non- skid ceramic coloured tiles 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 but n.exc 0.18 Sqm, in floors etc, set and jointed in neat cement sluury and pointed in white or coloured cement to match complete all as spd and directed

M&L 10 mm thick rendering in CM 1:4 on vertical surfaces for backing of tiles complete all as specifed and directed.

M&L Glazed ceramic coloured/ printed tiles in vertical surface of size 450x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on walls as in dado/ skirting etc complete all as specified and directed.

M&L for designer coloured wall cladding tiles, Size, colour and shape as approved by GE, set and jointed in neat cement slurry and pointed with coloured cement to match etc complete all as specified and as directed

M&L for 18-20 mm thick Granite tiles machine cut bedded and jointed with grey cements slurry and pointed with white or colour cement with admixture of pigment to match the shade of granite stone including grinding & polishing slab over screed bed 20 mm thick in CM 1 : 4 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab complete all as specified and as directed

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

S&F bib taps, long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylinderical vertical with closed top) 3 layer hoisted and fixed in position all as per SSR Part I complete all as specified and directed

S&F gun metal globe or gate valve of size 20 mm dia with iron wheel head screwed both ends and for iron pipe & fixed complete all as specified and directed.

S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed

S&Fixed ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, complete all as specified and directed.

S & F Plates (plain or chequered square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

S & F Pre -Painting galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ clading to wall fixed with self tapping screws complete all as specified

M&L prepration of new Steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified

Removing excavated soil/ building material/debries to a distance exc 1.5km but not exceeding 5.0 km and depositing where directed etc complete all as specified and directed

Dismantling of floor , hearth, wall tiling granite and chequered and interlocking tiles including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

S&F in repair for 100 mm dia of cast iron soil, waste and vent pipe in any length with or without ears with cement joints laid and fixed to wall/flooring etc complete all as specified and directed by Engineer-In-Charge

Ditto all as per item No 50 above but 75 mm dia

S&F for 100 mm dia of cast iron bend (any radius) with duct foot or heel rest etc complete all as specified and directed by Engineer-In-Charge

S&F as in repair vitreous china squatting pan, white, orissa pattern, size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron ‘P’ trap incl lime concrete bedding and making good to the disturbed surface to match with the existing surface of floor complete all as specified and as directed

S&F in repair 75mm dia CI floor /nahani trap with grating CP including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete.

M&L for formation of contraction (Dummy) joint 65mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M&L for 12mm thick expansion joint in 100mm thick slab filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' all as specified and directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed

M&L coloured Machine pressed precast concrete interlocking paver block any shape and size confriming to IS 15658-2006 of 60 mm thickness , M-35 grade with Grey Cement and no pigment, complete all as specified and directed (Sand cushion will be measured and paid seprately).

M&L -ditto- as per item No 58 above but except interlocking paver block, complete all as specified and directed

M&L sand cushioning including watering and consolidations etc complete all as specified and as directed

M&L for 20-25 mm thick chequered designer coloured tiles, Size, colour and shape as approved by GE, set and jointed in neat cement slurry and pointed with coloured cement to match etc complete all as specified and as directed

Supply only water proofing compound ISI marked

Supply & Fixing in repair of SFRC manhole cover 75mm thick factory made medium of the size as per site requirement including 75x1.5mm flat iron frame all arround the cover complete all as specified and as directed.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 290 Gde-E-165.

S & F Mild steel screw bolts of 11 to 15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 cm and not exceeding 10 cm.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

M&L for granite (of any type) stone slab 12 to 14 mm thick machine cut and machine polised, as in Dado , skirting, etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall complete all as specified and directed

S& F in repair spout pipe 750mm long GI Pipe 50mm dia for drain out water from balcony , set in CM 1:3 complete as specified and as directed

E/M Works Drilling/boring trial bore by reverse rotary cum percussion ring through any kind of soil, boulders, rock for a bore from 200 mm dia further expended to 300 mm dia as required at side with a provision of space for filling gravel 2 mm to 5 mm of size, and taking out of strata from the bore well every 20 mtr depth and 100 mm thick between the annular space of bore hole and tube well assembly all round for the following depth:-

For ground level up to a depth of 30 mtr.

For depth exceeding 30 mtr and upto 60 mtr.

For depth exceeding 60 mtr and upto 90 mtr.

For depth exceeding 90 mtr and upto 120 mtr.

For depth exceeding 120 mtr and upto 150 mtr.

Supply, lowering MS Casing pipe upto 200 mm internal dia and 6.0 to 8 mm wall thickness pipe conforming to ISO 9001including sockets and jointing length of pipes by socket threaded complete all as specified and directed

Supply, lowering MS slotted strainer upto 200 mm internal dia and 6.0 to 8 mm wall thickness pipe conforming to ISO 9001including sockets and jointing length of pipes by socket threaded complete all as specified and directed

S&F bail plug 200 mm internal dia threaded of standard length (not less than 1.5 m) and welded continously by electric arc welding at both ends complete all as directed.

S&F well cap suitable for 200 mm internal dia housing pipe made out of 6 mm thick mild steel plate complete all as specified and directed.

S&F mild steel clamp (for clamping housing pipe) suitable for 200 mm internal dia MS housing pipe, made out of 25 mm thick MS plate of size 1.30 mtr long 200 mm width fabricated to shape including drilling holes of suitable size for fixing of and including 08 Nos nuts, bolts & washers of suitable size complete all as specified and directed.

M&L for sanitary sealing of tube well by PCC of 1:2:4 type B1 (Nominal mix) using 20 mm graded aggregate of size 1500 mm x 400 mm with 2 Nos 50 mm bore GI tubing (medium grade) of required length, (not less than 1.5 M each) for gravel packing complete all as specified & directed.

Supply, laying packing washed pea gravel of 2 to 5 mm size around the casing pipe complete all as specified and directed.

Development of Tube well be means of air compressor unit and then by over pumping unit until sand free water is obtained and testing of yield for duration as under :-

For air compressor unit minimum 300 PSI, 1100 CFM for 1 to 24 hrs all as specified and directed.

For over pumping unit after seeing of air compressor for development of tube well. The minimum capacity of pumps shall One & half times than the pumps to be lowered in the bore well all as specified and directed.

Taking the water sample from Bore well and submitted the sample of water to the Govt lab or Govt apprved lab for testing of water Chlorine test and all chemical componants test complete all as specified and as directed

Supply and fixing in replecement of coloumn pipe made out of GI pipe heavy grade 80 mm nominal bore each 3 meter length including flange duly welded with web complete all as specified and directed.

Supply laying, testing GI tubing 80 mm dia bore medium grade conforming to IS : 1239 with all fittings laid in trenches complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.50m deep for laying of water pipe lines/taking out pipe lines and getting out in soft/loose soil including forming bottom surface to required level and slope all as specified and directed.

Returing ,fiiling including spreading ,leveling ,watering and well ramming in layers not exe. 25 cm soil all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the strarting point.

Supply and filling river sand in trenches including spreading for cushioning of LT UG cable complete all as specified and as dirceted. Note : Punned down thickness shall be measured and paid .

M&L for sub class ‘B’ bricks old size laid flat dry in trenches over cable, across the direction of cable complete all as specified & directed .

Supply ,fixing ,testing and commissionng double flanged non-rising stem type cast iron sluice valve suitable for 80 mm dia bore pipe with hand wheel and suitable for pressure rating of PN :1.6duly drilled holes for fixing of nuts and bolts stem made of high tensile brass ISI marked and conforming to IS including rubber gasket ,nuts,bolts and washer complete all as specified and directed.

Supply ,fixing ,testing and commissionng double flanged non-rising stem type cast iron Non Retrun valve suitable for 80 mm dia bore pipe with hand wheel and suitable for pressure rating of PN :1.6duly drilled holes for fixing of nuts and bolts stem made of high tensile brass ISI marked and conforming to IS including rubber gasket ,nuts,bolts and washer complete all as specified and directed.

Supply Installation commissioning testing factory assembled body three phase electric Submersible motor and pump copper winding, Capacity of motor 350 LPM to 600 LPM of suitable for head of up to 90 mtr head complete all as specified and as directed .Make :-Kirloskar/CG/ Havells

Supply and fixing in replacement of flat submersible 3 core 10 sqmm cable PVC insualted unsheathed multistranded copper conductor water proof suitable for submersible pump set complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 Volts grade cross sectional area 4 core x 25 Sq mm. complete all as specified and as directed.Note : Provision of suitable double crimpped lugs and glands deemed to be included in quoted rates.

Supply ,installation in repair starter panel non draw outdoor type installation with dust and vermin proof compartalized design single front construction ,weld rivet,hinges threads shall be apparent from outside ,powder coated panel IP 52 of size 1375 mmx1050 mmx300 mm including copper busbar of capacity 200 Amp three phase 4 wire and comprising of following:- (i) Incomer section: (a) MCCB 3 Pole 100 A,- 01 No. (ii)RYB indication Lamps,220V AC- 01 Set (iii)Current Transformer, 60/5A,C1-1.0 - 01 set of three (iv)Phase Sequence- 01No. (v)Water Level Controller- 01No (vi)On Delay Timer (vii)Start/Stop Push Button, 1No+1NC (viii)OUTGOING SECTION: suitable for 10 to 20 HP S/D STARTER (1W+1S) -02 Nos (ix)MCB 32 A TP 10KA-01 No (x)Over Load Relay, 14-23A (xi)Star Delta Timer,0-60 Sec (xii)On/Off/Trip Indication Lamps, 220 V AC - 01 set (xiii)Start/Stop Push Button,1NO+1NC (xiv)Power Wire, 10 Sqmm Note : Platform of panel:- Platform for the panel with PCC 1:4:8 type D-2 using 40 mm graded crushed stone ,15 cm thick in foundation ,brick work in CM 1:6 with sub class B old size bricks ,rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6 type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. The platform shall be at a height of 45 cm above the nearest road level. The platform shall be constructed as per Manufacturer drawing and design.

Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron strip of 32 x 6 mm as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) complete all as specified and directed

M/S PRADEEP ENTERPRISES

M/S Sanjay Enterprises

akhil enterprises