SPECIAL REPAIR TO BUILDING NO O 20 AND O 21 AT NEW NAVY NAGAR UNDER AGE BR II OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Dismantiling of Asbestos/galvalume cement (Corrugated, semicorrugated, etc.)sheets in roof covering complete all as specified and directed.

Supply and Fixing in position Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as in roof covering/claddig to wall, fixed with self tapping screws, having tensile strength of 550 Mpa yield strength and zinc (galvanised) + Aluminium combined coating of 150 GSM/PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to 7 micron Epoxy primer fixes. Note : The sheet shall be fixed to MS angle with or J hook with incl. wind ties etc & wind ties shall be measured seperately all as specified and directed.

Dismantling of wrought iron or mild steel ork of any description not otherwise provided for

M&L and fabrication of mild steel work as in posts,purlins,crane gantries, rafter ,rails,wind tie nut & bolt etc and fasteningsetc and heavy brackets framing (MS tube, beam,tee,angle,channels,flat section etc and other sections) including distance pieces,cleats etc complete all as specified and directed .

M&L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces including prepration of surface of any description over 10 cm width or girth not otherwise described all as specified and directed

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles

M & L Brick work built in cement mortar 1:4 using old side sub class "B" bricks in wall straight or curved on plan exc 6m mean radius complete all as specified and directed

Taking down cement plaster of any description on brick walls or concrete surfaecs etc. including racking out joints, hacking for key, scrubbing down with water complete in patches adn removing rubbish from the premises complete all as specified and directed .

M&L for 20 mm thick plastering in two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4 mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement all as specified including scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note : WPC to be mixed in setting coat only and shall be measured and paid as supply only separately)

Supply integral water proofing compound of ISI make.

M & L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

M&L for preparing new plastered surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M & L Prepration of new plastered surfaces of walls, pillars, cornices, priming plastered and other surfaces with alkali-resistant priming paint over a coat of wall care putty and applying two coats of distemper oil emulsion, white or tinted on walls all as specified

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each all as specified and directed all as specified and directed.

All as per Item No 14 above but exc 1.5 sqm but n exc 4 sqm each all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in double steps cill of aluminium sliding window 18 to 20 mm thick over 20 mm thick screed bed in cement mortar 1:3 complete all as specified.

M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in lintel and and sides of aluminium sliding window 18 to 20 mm thick over 15 mm thick rendering in CM 1:3 complete all as specified and directed.

S & F powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws locking arrangements etc. complete all as specified and directed by Engr-in-Charge. Note: Minimum 25 micron anodisation for all aluminium sections)

M&L powder coated aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (DG-102 (80 X 66 mm aperture) all complete.

S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete.

S&F 4mm thick frosted sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete.

S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to Aluminium doors,windows shutter aluminium wire staples complete all as specified and directed.

S&F in repairs aluminium serrated finish 20mm dia deorative curtain rod of approved pattern and shade with all fittings as per site requirement such as end block, rounded block, brackets, CP screws, rovel plug, etc. complete all as specified and directed by Engr-in-charge.

Dismantling stone slabs of any description or thickness in floors / dados, etc laid bedded and pointed in any mortar complete all as specified and directed by the Engineer-in-charge

M&L for granite (of any type) 20mm thick the machine cut , bedded and jointed with grey cement slurry and pigment to match shade of granite stone including grinding and polishing cutting pinning complete over and including 20mm thick screed bed cement mortar 1:4 including cutting for wash basin /urinal partition etc complete all as specified & directed

M & L 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 10mm thick screed bed cement mortar 1:4 including cutting for wash basin /urinal partition etc complete all as specified & directed

S & F in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified.

S&F in repair Stop valves, cast copper alloy high pressure 15mm bore ISI marked with cruch or butterfly handles screwed down both side for iron pipes complete as specified and directed

S & F 32 mm , Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed in repairs

S&F in repair 10litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets all complete as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm in repairs

S&F in repairs Bib taps, 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6 kgf/cm2 fixed complete to wall, floors for drain out the waste water in Kitchen Sink/wash basin complete all as specified and directed.

S&F stainless steel tubular towel rail 20mm dia D type 60cm long between flanges all complete as directed.

S&F 32mm dia LDPE PVC waste pipe for WHB in repairs including socket & screw complete all as specified and directed.

M&Lfor cudappah stone slab 40 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete for kitchen platform over and including 20mm thick screed bed cement mortar 1:4 etc complete all as specified & directed .

Supply and fixing in repair 20 mm bore GI tubing. fixed to wall including necessary short piece/length, including, breaking the existing brick wall for replacement of corroded GI pipe in/on wall and making good the distrubed surfaces complete all as specified and directed by Engineer-in-Charge.

All as per item No 40 above but 15 mm bore GI tubing.

M&L CI Nahani trap dia of outlet 75mm fixed in repairs including jointing to waste pipe in runlead.

S&F PTMT grating doom with or without hole over Nahani trap and floor trap of 100mm Dia

S&F in repairs vitreous China squatting pan (Orissa pattern), white, of size 580x440mm white, with 'P' or 'S' trap, integral foot rests including flush pipe, trap, lime concrete bedding inlcuding taking out of old lime concrete bedding, unserviceable connections etc and connecting up new complete all as specified and directed by the Engineer-in-charge

S&F in repairs vitreous China wash down water closet pan (Pedestal pattern) white, with 'P' or 'S' trap, including flush pipe, trap, connection to drain or outgoing pipe, anti-syphonic pipe, seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminum anodized hinge device and jointing and connecting up complete all as specified and directed by the Engineer-in-charge

S & F Sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wasters, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460 mm bowl sie 410mm x 330 mm x 160mm complete all as specifice and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land complete all as specified and directed

M&L for Vitrified Ceramic tiles light shade 9 to 10 mm thick (square /rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding in cement mortar 1:6 etc complete all as directed .

M&L non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified.

M & L Coloured glazed ceramic tiles 300 x 450 x 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment over 12mm thick rendering as in backing coat in CM 1:4 all as specified and as directed.

Rounding to edges of stone slabs one edge,such as in steps,cooking plateform,and other similar situations all complete as directed by Engr-in-Charge.

S&F 5.5 mm thick sheet glass ordinary quality coloured exc .5 sqm each complete all as specified and directed

S&F 100 mm size mild steel mortice 4 lever lock vertical type

S&F aluminium door closer hydraulically regulated suitable for door shutters of 851 to 1000 mm in width complete all as specified and directed

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed

M & L mild steel TMT bars 6 to 8 mm dia as in reinforcement cut to length, bent to shae required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anealed not less than 0.9mm dia) complete all as specified and directed.

M & L mild steel TMT bars 10 mm dia and over cut to lenth, bent to shape required, including cranking,bending, spirally for hooping for columns, hooking ends and binding waith and including mild steel wire (annealed) not less than 0.9mm dia all as specified & directed.

M & L Use & waste of form work to side and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc

M & L Reinforced cement concrete M-30 (Design mix), as in beams,lintels all as specified and directed.

Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggegate as in floor, finished the surface even and smooth without using extra cement and spike rolling to surfaces or making impressions of expanded metal whilst the concrete is green all as directed .

M&L 100 mm thick P.C.C 1:4:8 type D-2 using 40 mm graded stone aggegate as in sub base complete all as specified and directed

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in subbase to floors all as specified and directed.

M&L for sand cushioning under interlocking paver blocks watering and compact complete all as specified & directed .

M & L Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed

M&L for 20 mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed

M&L for prepolished coloured chequerd floor tiles of size 300x300x25 mm thick machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed. Colour, size and pattern shall be approved by GE. (Cement Mortar screed bed shall be measured and paid separately)

Dismantling wall and ceiling boards (fibre,pulp, insulation etc) or insulation boards any thickness including cover fillets

S&F anodised aluminium snap grid frame work (Grid section bevelled tagular XL15mm silhouette) for false ceiling size of grid 605 x 605 mm including 6 mm dia GI hanger adjusting level fixed to slab/purlins by means of ceiling cleats made out of GI flat 40 x 3 mm including 600 x 600 x 16 mm size dune finished bevelled tegular board H3651B complete all as specified.

Supply & Fixing of 18 to 19 mm thick Celuka ply of Plain color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the engineer - in -charge.

Supply & Fixing of 18 to 19 mm thick Celuka ply of one side Prelam/Rigidlam and other side plain white colour to make kitchen cabinet Shutter/ drawer Front shutters in double panel complete as per specifications and as directed by the engineer - in - charge.

Supply & Fixing of stainless steel handles 100 mm size for kitchen cabinet shutters.

Supply & Fixing of auto closing hinges openable at 0 or any degree for kitchen cabinet shutters.

Removing excavated soil and demolised material to a distance exc 5 Km but n.exc 10 Km out side MoD land complete all as specified and directed

M & L Looking mirror 5.5 mm thick mounted on 5mm thick PVC Sheet including power coated aluminium beading of approved pattern fixed complete all as specified and directed.

M & L 15mm bore centre hole basin mixer with round spout with 450mm long copper pipe and brass nut with out pop up fixed comlete all as specified and directed Make : Jaquar cat part No LYR-38001B or euivalent in cera, Hindware.

S & F Hand shower (Health faucet) with 8mm dia 1mtr long flexible tube and wall hook fixed complete all as specified and directed. Make Jaquar cat part No ALD-573 or equivalent in cera, Hindware.

S & F Water closet one piece wall hung EWC with soft close seat cover and twin flush fitting ( as approved by Engr-in-charge) fixed complete all as specified and directed Make CERA, CROMA Size 550x365x355mm cat part No S1043113P Trap (Ivory Colour) or equivalent in Jaquar/Hindware.

S & F Hand basin counter/cabinet type complete fitting as per sample approved by Engr-in-charge fixed complete all as specified and directed. Make : Cera 1005 x 455 mm x 600 mm Cat Part No S2030119 celene wash basin or equivalent in Jaquar/Cera/ Hindware.

S & F CP waste coupling 32mm bore with cup and washers fixed complete all as specified and directed. Make : jaquar cat part No ALD-709L130 or euivalent in cera/ Hindware.

S & F Soap dish holder fixed complete all as specified and directed Make jaquar cat part No ACN-1131N or euivalent in Hindware/cera.

S & F Tumblar holder fixed complete all as specified and directed. Make :Jaquar cat part No ACN -1141N or equivalent in Hindware/cera.

S & F Toilet paper holder with flap fixed complete all as specified. Make : Jaquar cat Part No ACN-1153N or equivalent in Hindware/cera.

S & F Glass shelf 600mm long fixed complete all as specified and directed Make : Jaquar cat part No ACN-1171N or equivalent in Hindware/cera.

S&F in repair Plastic water closet seat cover, white/black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminisied hinges devices complete all as specified and directed.

S & F Corner glass shelf with bracket fixed complete all as specified and directed. Make : Jaquar cat part No ACN-1173 or euivalent in Hindware/cera.

Taking down carefully copper/ aluminium point wiring ie. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors complete all as specified and directed by Engineer-in-Charge.

M & L for point wiring with PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, passing through PVC casing caping including accessories and including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly for the following:- NOTE : Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm.

One light/ fan/ E'fan point controlled by one way switch

One 3 pin socket outlet, 5 Amps on the same board with other switches.

One 3 pin socket outlet, 5 Amps, independent

All as per item No 88.00 above but with 2.5 sqmm cable for one three pin 15 Amps socket out let controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per item No 88.00 above but with 4.0 sqmm cable to connecion of AC plug and socket box enclouser. NOTE : Separate Circuit conductor from MCB DB to Plug socket box to be drawn for each points control by 25 Amp MCB and length of circuit as per site requirement and as directed.

S & F modular switch piano, 1 module, flush type, single pole, one way 6 Amps, 240 Volts confirming to IS:3854 and ISI marked complete all as directed.

S & F modular socket, 6A -2/3 pin combined 2 module, flush type, ISI marked, 240 Volts, confirming to IS:1293 : 2019 and ISI marked complete all as direcred.

S & F modular switch piano, 1 module, flush type, single pole, one way 16 Amps, 240 Volts confirming to IS:3854 and ISI marked complete all as direcred.

S & F modular socket, 6/16A -2/3 pin combined 2 module, flush type, ISI marked, 240 Volts confirming to IS:1293 : 2019 and ISI marked complete all as direcred.

S & F modular stepped type (5 step) electronic fan regulator, 2 module, 240 Volts conforming to IS:11037 : 2019 and ISI marked complete all as direcred.

S & F PVC box of 12 module for mounting of modular switches including blank plate for blank module complete all as specified and directed by Engineer-in-Charge.

All as per Item No- 96.00 above but of modular metal flush box, 8 module.

All as per Item No- 96.00 above but of modular metal flush box, 3 module.

S&F modular white cover plate with frame, 12 module.

S&F modular white cover plate with frame, 8 module.

S&F modular white cover plate with frame, 3 module.

Taking down unserviceable FTL/batten fittings with supply and fix LED batten fitting 20 Watt, 240V, 4ft CDL/NW comprises of extruded channel in thermally conductive material with decorative end cap and high translucent serration milky white diffuser of high optically efficient plastic FR grade. The luminaire is pre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F >0.95, THD <20% and IP20 protected alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittings.

All as per item above but slim LED integrated batten of 10 watt 2 ft complete.

Taking down old existing unserviceable recessed mounting light fittings and Supply and fix 2' x 2' LED luminaires CRCA housing with efficient optics ensuring perfectly uniform illumination, with polymer diffuser complete with all accessories suitable for recessed mounting 36 Watt, 240V, CDL/NW. The luminaire is pre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F >0.95, THD <20% and IP20 protected alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittings as specified and directed by Engr-in-Charge. The contractor shall provide test certificate from authorized lab.

Taking out unserviceable ceiling fan and deposit to MES Store, supply and replacement with ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified.

S & F in replacement with LED 45 Watts street light in pressure die cast aluminium housing with toughened glass and high power LED's with secondary optics and IP66 protection, aerodynamically designed for all weather conditions with excellent thermal management having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07, efficacy ≥ 110LPW alongwith 10KV SPD with including connecting light with three core copper wire from connector or ceiling rose.

M & L for snap-on trunking system with cover, angles, bends and all accessories and fitting of size 50x80mm fixing on wall Complete all as specified and directed.

Taking out unserviceable exhaust fan and deposit to MES Store, supply and replacement with Exhaust fan, steel body, AC single Phase. 230V 50 Hz, RPM 1200, Copper winding of size 300 mm sweep with louvers fixed type made out of 16SWG GI sheet with horizontal ventilation machine pressed cutted ventilation, including connection as required at site with three core flexible copper cable all as per specified and directed.

S & F sheet metal enclosures single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB single pole 20 Amp 240V conforming to IS:1293 : 2019 and ISI marked complete all as direcred..

S & F in replacement of ceiling rose surface bakelite 65x50 mm with 3 terminals complete all as direcred..

S & F MCB DB TPN 4 way with 200 amps rated busbar 415 V double door confirming to IP 43-IK complete with din rail, Neutral and Earthing bar complete all as specified.

M&L for in replacement of sheet metal enclosure for DBs when MCB to be used single phase 8 way, double door, arclic door, 240V having Din rail, Neutral & Earthing bar, IP 43 - IK 09 complete all as specified and directed by Engineer-in-Charge.

S & F MCB SPN, up to 32 Amp, 10 KA, 230 Volt complete all as specified and directed by Engineer-in-Charge. .Make - LEGRAND Cat part No: 408612 to 17 or its equivalent in Siemens/ Schneider.

S & F miniature circuit breaker (MCB) TPN, 63 Amp, 415V, 10KA 'B' curve in the DB complete with connection testing and commissioning complete all as specified.

S & F miniature circuit breaker (MCB) SP, 5 to 32 Amp, 240V, 10KA 'B' curve in the DB complete with connection testing and commissioning complete all as specified.

M & L for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to a depth not less than 1.5 mtr below ground level connected to connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 including GI pipe 15 mm dia light grade for protection to the extend of 7.5 mtr as earthing lead connecting to equipment with provn charcol and salt complete including PCC chamber with RCC cover watering arrangement with GI pipe 20 mm dia medium grade and MS funnel, including excavation and earth work and returning, filling in including ramming and removal of surplus soil and testing on completion complete.

SAHU AND SAHU CO.

JANKI ENTERPRISES

SHRI SAI ENTERPRISES

M/S V N ENTERPRISES

satguruenterprises

SRI RAM CONSTRUCTION