PERIODICAL SERVICES TO VARIOUS BLDGS OF OTM AND MD ACCN AND REPAIR/REPLACEMENT OF INTERNAL WIRING, LED FITTING, FIXTURES AND CONNECTED SERVICES FOR OTM ACCN AT SOLAN UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

M & L for point wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing sunken boxes for mounting of switch, socket all as specified and directed for the following :-

One light/fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One bell/buzzer point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

One two way point controlled by two, two way switches 05 / 06 Amps complete all as specified and directed.

All as per serial item No 2.03 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :-

One light / fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One bell/buzzer point controlled by one, one way switch 05/06 Amps complete all as specified and directed.

One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

One two way point controlled by two, two way switches 05 / 06 Amps complete all as specified and directed.

All as per serial item No 4.03 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge.

Supply & fixing socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed by Engr-in-Charge.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge.

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed by Engr-in-Charge.

Supply and fixing bell push flush type , 5 amps , 240 volts all as directed by Engr-in-Charge.

Supply and fixing buzzer/door bell ding dong type , 240 volts AC all as directed by Engr-in-Charge.

Supply & fixing switch piano flush type, 05/06 Amps single pole, two way 240 volts complete all as specified & directed. by Engr-in-Charge

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge.

Supply and fix LED ADORE 5 W B22 CDL 3 STAR LAMP, odering code LHLDEUEBML8R005, lumen out put 525 lm,colour temp 6500K, length 102mm , dia 56mm and amp 0.03A complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed by Engr-in-Charge.

Supplying & Fixing Decorative Wall light fixture made up of Polycarbonate, suitable for 1X9W retrofit LED lamp ( B-22 base), complete all as specified and directed by Engr-in-Charge.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.

Supply and fixing LED bldg security/street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed by Engineer -in- Charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, frame and louvers including taking down unserviceable and depositing to E/M Store complete all as specified and directed by Engr-in-Charge.

Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed by Engineer - in - Charge.

Material and labour for sub main wiring with 2x4 Sqmm nominal cross sectional area (two single core cable of 4 Sqmm for Phase and neutral + o1 single core cable of 2.5 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed by Engineer - in - Charge.

Ditto all as item No 23.00 above, but by using two single core cable of 6 Sqmm for Phase and neutral + 1 single core cable of 4 Sqmm for earth wire complete all as specified & directed by Engineer - in - Charge.

Ditto all as item No 23.00 above, but by using two single core cable of 10 Sqmm for Phase and neutral + 1 single core cable of 6 Sqmm for earth wire complete all as specified & directed by Engineer - in - Charge.

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

-Ditto- all as per item No 27.00, but of size 08 way SPN. complete all as specified & directed by Engineer - in - Charge.

-Ditto- all as per item No 27.00, but of size 12 way SPN. complete all as specified & directed by Engineer - in - Charge.

Supply and fixing MCB, SP, AC, 240 volts "C" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed. complete all as specified & directed by Engr - in - Charge.

Supply & fixing MCB, DP (Double Pole), AC, 240 volts, C series capacity 20 Amps to 32 Amps 10kA and making connections complete all as specified & directed. complete all as specified & directed by Engr - in - Charge.

Supply & fixing MCB, DP (Double Pole), AC, 240 volts, C series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed. complete all as specified & directed by Engr - in - Charge.

Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision of four pole 100 Amp isolator and MCBs of cap 20 to 40 Amps as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

Supply & fix Isolator 4 Pole 'C' series 100 amps capacity AC 415 V,10kA complete all as specified and directed by Engineer - in - Charge.

M & l for Sheet metal enclosure including fiiting on wall including and making the connection with MCCB 4 Pole 100 Amps 25KA, 415 volts , 50 Hz ,thimble/lugs, aslo including all nuts bolts required for fixing all as specified and directed by Engineer - in - Charge.

Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed by Engr - in - Charge.

Taking down carefully service connection/under ground cable of any size and making good to disturbed surface as per existing complete all as specified and directed by Engr - in - Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq. mm 2 core nominal cross section in service connections complete all as specified and directedby Engr - in - Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm 2 core nominal cross section in service connections complete all as specified and directed by Engr - in - Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm 2 core nominal cross section in service connections complete all as specified and directed by Engr - in - Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 2 core nominal cross section in service connections complete all as specified and directed by Engr - in - Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 4 core nominal cross section in service connections complete all as specified and directed by Engr - in - Charge.

Dismantling house service brackets, any type.

Supplying and fixing House service bracket (hook type complete with 3.0m long G.I. pipe 40 mm dia Med. grade, two nos 90 deg bends. M.S. hook and stay or guy.

Taking down after disconnecting electric connection 25/35/50 Ltrs storage water heater geysers, descalling and repair /replacement of un-serviciable spare and reassembling, recommissioning and testing complete all as per specified and directed. (Note - Spare parts will measured and paid saperetely under relevent items of schedule).

S&F in repair innner water container ISI Marked made of SS, vertical or horizontal type for 25 ltr to 50 ltr capacity geysers (as per existing sample) complete all as specified and directed. by Engr - in - Charge.

S&F cast copper alloy CP apparatus plate assembly (ISI Marked) with rubber washer suitable for 25 to 50 Ltrs capacity Geysers after taking out unserviciable aperature plate complete all as ditected. by Engr - in - Charge.

S&F insulated flexible multi strand copper conductor nominal area 4 sq mm, 3 core after taking out old unserviceable cable complete all as directed. by Engr - in - Charge.

S&F fusible plug for geysers melting at 95 degree centigrade ( any special required for for fixing plug shall be supply without any financial implication after taking down old unserviceable fusible plug complete all as directed. by Engr - in - Charge.

S&Fin repair indicators lamp round /rectangular type for any type or size capacity after taking down old unserviceable indicator lamp complete all as directed.by Engr - in - Charge.

S&F Heating Element ISI Marked round/ tringular base, push type or thread type including rubber washer for 1.5/2.0 KW suitable for geysers 25 Ltrs to 50 Ltrs capacity (as per existing sample) including taking down unserviceable complete all as specified and as directed. by Engr - in - Charge.

Supply & fix of geyser element 1.5 /2.0 KW capacity porcealen type of size 12 to 15 inch complete with clamps, nuts and bolts washers etc for geysers ISI marked (any Make) complete all as specified and directed. by Engr - in - Charge.

S&F thermostat ISI Marked suitable for geysers 25 Ltrs to 50 Ltrs capacity (as per existing sample) including taking down unserviceable complete all as specified and as directed. by Engr - in - Charge.

S&F PVC connections 450mm long for Hot/Cold water of 15mm size with cromium nuts and washsers fixed as in repairs complete all as specified.by Engr - in - Charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, hermostate, NRV, connection piece etc.and including taking down unserviceable and deposit to E/M Store. Note:- Geyser will be fitted with fastners-04 Nos including bolts washers etc and making good disturbed surface complete all as specified and directed by Engr-in-Charge.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store the unserviciable/burnt copper wire of the motor from the exhaust fan and rewinding the motor of the exhaust fan of any make of size 250 & 300mm, 300 & 450mm sweep with super enamelled copper wire of same size guage and weight as per existing including necessary insulating material to gain desire RPM as per manufacture design and varnishing the winding with two coats of synthetic varnish including heat treatment oiling greasing complete and reassembling of all parts with testing on completion complete all as specified and directed by Engr-in-Charge.

Copper winding of rotor incl varnish, paper insulation of different capacities by using the same gauge as directed by Engr-in-Charge.

Fan blade made of cast iron of different sizes as per existing as directed by Engr-in-Charge.

Fan shaft suitable for exhaust fan of different types as per sample including bush made of copper/gunmetal

Supply only Capacitor 4 /3.15 mfd capacity item code QHPCWC5004X0 for exhaust fan on any sweep.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse)of any type and size and making good the disturbed surfaces/walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

Supply & fixing in repair/replacement to existing tube light fitting of any capacity with LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair/replacement to existing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and installed in repair/replacement to existing LED bldg security/street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed by Engineer -in- Charge.

Supply and installed in repair/replacement to existing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed by Engineer -in- Charge.

Supply and fixing in repair/replacement to existing LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed by Engr-in-Charge.

Supply and fixing in repair/replacement to existing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement to existing LED ADORE 5 W B22 CDL 3 STAR LAMP, odering code LHLDEUEBML8R005, lumen out put 525 lm,colour temp 6500K, length 102mm , dia 56mm and amp 0.03A complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/repair/replacement to existing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement to existing Decorative Wall light fixture made up of Polycarbonate, suitable for 1X9W retrofit LED lamp ( B-22 base) complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement to existing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge.

Supply and fix in repair/replacement to existing socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed of maby Engr-in-Charge .

Supply and fix in repair/replacement to existing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge.

Supply and fix in repair/replacement to existing socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed by Engr-in-Charge.

Supply and fix in repair/replacement to existing switch bell push flush type , 5 amps , 240 volts all as directed by Engr-in-Charge.

Supply and fix in repair/replacement to existing door bell ding dong type , 240 volts AC.

Supply and fix in repair/replacement to existing switch piano flush type, 05 / 06 Amps single pole, two way 240 volts complete all as specified & directed. by Engr-in-Charge.

Supply and fix in repair/replacement to existing 6 Amps 3 Pin Plug Top complete all as specified & directed by Engineer-in-Charge.

Supply and fix in repair/replacement to existing 16 Amps 3 Pin Plug Top complete all as specified & directed by Engineer-in-Charge.

Supply and fix in repair/replacement to existing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement to existing plastic laminated bakelit sheet 3 mm thick of size 4"x 5" cm including screws nut and bolt and cutting of sheet complete all as specified & directed by Engineer-in-Charge.

Supply and fix in repair/replacement to existing MCB, SP, AC, 240 volts "C" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed. by Engr - in - Charge.

Supply & fix in repair/replacement to existing MCB, DP (Double Pole), AC, 240 volts, C series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed. by Engr - in - Charge.

Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH including taking down unserviceable and depositing to E/M Store complete all as specified and directed by Engineer-in-Charge.

S&F steel meter box of size 90x95x20 cm box with thickness of steel 2mm including double door for opening with lockable arrangement incl steel knob, hinges, plater for hanging of meter 02 Nos and DBs 03 Nos etc with 4mm thick plain glass (size 6"x6") for provn of meter reading complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick/stone/concrete wall surface in any position complete all as specified and directed.

M/L rendering 15mm thick on fair faces of brick or concrete surface (upto 6 mtr height) in CM 1:4 finished even and smooth with water proofing compound (External surface)

M&L rendeing 10mm thick other then fair faces surfaces in CM 1:6 finished even and smooth with out using extra cement (Internal surfaces)

M/L rendering 5mm thick on ceiling surface in CM 1:3 finished even and smooth complite all as specified and directed.

M&L for for applying 3 mm thick wall care putty (applied in two layers) of old /new decorated plastered or unplastered surfaces of wall complete all as specified and directed.

M/L preparatin of new / previously untreated surface & applying two coats of oil bound distemper (OBD) over one coat of chalk white on wall surface,complete all as specified and directed

M&L for preparation of new or previously untreated surfaces of wall and and applying two coat of acrylic emulsion exterior quality (Apex painting) (tint as approved by GE) complete all as specified. Note:- Paint and primer shall be 1st quality.

M&L for preparation of plastered or unplastered new decorated surfaces of ceiling etc. incl clening washing etc. and applying three coat of white lime wash complete all as specified.

Supply only water proofing compouond all as specified as per manfacture instruction.

Preparation of old surfaces of walls including complete removal by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of colour wash, complete all as specified and directed by Engineer –in-Charge.

M&L for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down of steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of white lime wash complete all as specified.

M&L for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down of steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying two coat of white lime wash complete all as specified.

All as per above Srl item No 72.00 here-in –before but one coat of lime wash on ceiling,

All as per above Srl item No 71.00 here-in –before but two coat of lime wash on ceiling,

M&L for preparation of plastered or unplastered old decorated surfaces of walls incl cornices, chajjas, sun shades etc. and applying one coat of cement base paint with and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) including sand paper or iron patti / flat complete all as specified.

M&L for preparation of plastered or unplastered old decorated surfaces of walls incl cornices, chajjas, sun shades etc. and applying two coat of cement base paint with and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) complete all as specified.

M&L for preparation of old decorated plastered surfaces of walls by rubbing down, washing & stopping of distempered surfaces using necessary filling compound of Birla/ JK wall care putty to obtain smooth regular/ even finish using sand paper and applying one coat of oil bound distemper, complete all as specified and directed by Engineer-in-charge.

M&L for complete removal of existing treatment from internal surfaces on walls by wire brushes, sand paper and iron patti / flat & stopping of surfaces & leveling/ edging the disturbed places/edges and applying compound of Birla/ JK wall care putty to obtain smooth regular/ even finish using sand paper and applying two coats of oil bound distemper over a coat of alkali-resistant primer, complete all as specified and directed by the Engineer-in-Charge.

Material & labour for preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed.

Material & labour for preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified & directed.

Material & labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed.

Material & labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified & directed.

M&L including preparing old roof covering steel surfaces (Plain/ corrugated roof sheets) of any type of treatment surfaces incl washing and cleaning etc. to steel and iron surfaces and applying one coats of synthetic enamel roof paint, complete all as specified.

Material & labour for preparation of old painted wood based weather boarding/ plywood/ AC board as in ceiling surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed.

M&L for preparation of plastered or unplastered old decorated surfaces with sand papering of walls incl cornices etc. incl washing, rubbing down and stoping the connected previously treated surfaces and applying one coat of acrylic emulsion exterior quality (Apex painting) (tint as approved by GE) complete all as specified.

Material & labour for preparation of old wood or wood based surfaces of any description not otherwise described of any width or girth, and applying first quality french polish one or more coats (for achiving glossy finish) incl a coat of filler complete all as specified & directed.

Material & labour for preparation of old brick & concrete surfaces as in floors of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed.

M&L Writing letters or figures on any wall surface (Block. Roman, Italic or Indian) n exc. 30 cm high, painted with thick paint, so that they stand out boldly and solidly without showing signs of brush marks complete all as specified and directed by Engr-in-Chrge.

M&L Stops, commas, short lines, dashes, hyphens, brackets, etc. marked between any letters or figures on any surface complete.

Amount of credit of Rs. 24131.20 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

R B TRADERS

R. P. Suppliers and Construction Co.

Rajesh Agencies