REPAIR REPLACEMENT OF INTERNAL AND EXTERNAL ELECTRIC SUPPLY INCLUDING ALL LT EQUIPMENT STREET LIGHTS SECURITY LIGHTS GATE LIGHTS WALL SECURITY LIGHT INCLUDING REPLACEMENT OF FITTING FIXTURES REPAIR OF CEILING FAN WALL FAN AND AND ALIED EM WORK

Amount

Taking down carefully the existing point wiring of any size/capacity and type by disconnecting from the terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings etc by unscrewing and removing from site complete all as specified and directed by engg-in-charge. Note :cost of unserviceable materials will be charged from the contractor against schedule of credit.

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated un sheathed multi stranded copper conductor,FRLS 1100 Volts grade, with non metalic rigid PVC medium grade duty conduit/casing capping on wall/roof for surfacing wiring but not less than 20mm dia with accessories such as junction boxes, bends, tees etc. of suitable size including sunk cast iron or pressed steel terminal box for mounting switches, sockets fan regulators etc with 3 mm thick plastic laminated sheet top cover complete all as specified and as directed by Eng-in-charge. Make : Hylem / Anchor including continuous earth wire PVC insulated 1.50 Sq mm multi stranded copper conductor, FRLS 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for One light /bell/fan point controlled by one 1 way switch

All as per Item No 2 herien before but One three pin switch socket 5 Amps plug point on independent board complete all as specified and as directed by Eng-in-charge

All as per Item No 2 herien before but One three pin switch socket 5 Amps plug point on same board complete all as specified and as directed by Eng-in-charge

All as per Item No 2 herien before but One bell/buzzer point controlled by one bell push on independent board complete all as specified and as directed by Eng-in-charge

All as per Item No 2 herien before but One light point controlled by two 2-way switches, with cables 1.5 sq. mm size including continuous earth wire PVC insulated 1.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by Eng-in-charge.

All as per item No 2 herein before but point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by Eng-in-charge.

M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC sheathed FRLS cable, 1100 volts grade IS-694 marked, with multi strandad copper conductors and earth continuity wire with similar 1.5 sqmm cable (incl connecting to earth dolly) concealed in wall including PVC conduit size of not less than 20mm and fittings/accessories all fixed to the surface of walls/ceiling, and also incl sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for the following :- Note : (Cost of for cutting chesing and making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate.) One light /bell/fan point controlled by one 1 way switch

All as per item No 8 herein before but One socket out let 5 Amps 5 pin on independent board complete all as specified and as directed by Eng-in-charge

All as per item No 8 herein before but One socket outlet 5 Amps 5 Pin on same board with other switches complete all as specified and as directed by Eng-in-charge

All as per item No 8 herein before but One bell/buzzer point controlled by one bell push on independent board complete all as specified and as directed by Eng-in-charge

All as per item No 8 herein before but point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by Eng-in-charge.

All as per item No 8 herein before but point wiring with 4 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps switch including continuous earth wire PVC insulated 4 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by Eng-in-charge.

Supply and fix in replacement Switch Piano, Flush Button, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed by Eng-in-charge. Make : Havells / Anchor / Cona

S&F in replacement of switch piano, flush type, 15 amps, single pole, one way suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. Make: Havells/ Anchor/Cona

S&F in replacement of socket outlet 2in1, 3 pin 5 Amps flush type suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. Make: Havells/ Anchor/Cona

S&F in replacement of socket outlet 2in1, 3 pin 15/5 Amps flush type suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. Make: Havells/ Anchor/Cona

Supply and fix in replacement ceiling rose surface type bakelite 65 x 50 mm with three terminals with ISI mark complete all as specified and as directed by Eng-in-charge. MAKE : ANCHAR / LISHA / Havells

Supply and fix in replacement lamp holder PVC/Poly Carbonate type suitable for batten fittings with ISI mark complete all as specified and as directed by Eng-in-charge. MAKE : ANCHAR / LISHA / Havells.

S&F in replacement Bell push flush type 5 Amps complete all as specified and as directed by Eng-in-charge. Make : ANCHAR / LISHA / Havells

S&F in replacement steped type electronic fan regulator heavy duty flush type socket size on th existing phenolic laminated sheet complete all as specified and as directed by Eng-in-charge. Make : ANCHAR / LISHA / Havells

S&F in replacement of call bell, Ding dong type, suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. Make : ANCHAR / LISHA / Havells

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 3000/6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge. Make: Halonix Cat No -HLB-03-20-CW-AL/Philips/Crompton

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,10 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round blocks and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix Cat No -HLB-03-10-CW-AL / Philips/Crompton.

Supply and fixing MOD ROUND-SURFACE mounting LED ultra slim round down lighter made of PDC AL with high efficient LEDs & Glare free opal diffuser IP20, 9 watt, 6500/3000 K ,230 volt, LED ceiling fitting, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix Cat No-HLDLS-R06-12-CW/Philips/Crompton.

Supply and fixing wall mounted LED bulk head fittings, 10 watt, 2700/6000K,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix Cat No- HLBH-02-10-CW/Philips/Crompton Greaves.

Supply and fixing LED Panel lights - Quadra Series , 36 watt, 6000K,, 230 Volts, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: SYSKA Cat No SSK-TVP-6060-36W/Philips/Crompton Greaves.

Supply and fix in replacement of ceiling light with 9 watt recessed mounted round LED Downlights with PDC aluminium body heat dessipation and high transmittance diffuser 3000/6000K including fixing in ceiling/POP for suitable of LED light fitting and make good complete all as specified and directed by engineer-in-charge. Make :- Polycab Cat No LD00125031 or its equivalent in Philips/CG.

Supply and fix in replacement of ceiling light with 18 watt recessed mounted round LED Downlights with PDC aluminium body heat dessipation and high transmittance diffuser 3000/6000K including fixing in ceiling/POP for suitable of LED light fitting and make good complete all as specified and directed by engineer-in-charge. Make :- Polycab Cat No LD00125037 or its equivalent in Philips/CG.

S&F in replacement fan capacitor 2.5 Mfd complete all as specified and as directed by Engineer-in- charge. Make :- Epcos/Usha/Asian/Havells

S&F in replacement fan capacitor 3.15 Mfd complete all as specified and as directed by Engineer-in- charge. Make :- Epcos/Usha/Asian/Havells

Supply & fix in replacement metal clad socket single pole and neutral sheet metal enclosure with and 20A earth plug and socket complete with one single pole MCB 20 amp 240 Volts all as specified and directed complete all as specified and as directed by Engineer-in- charge. Make : Leagrand / Havells / Anchor / L&T.

M & L in replacement sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB SPN 240 Volts, 2 way concealed in wall such as front cover shall be seen flush with the wall surface all as specified and directed complete all as specified and as directed by Engineer-in- charge. Make : Havells/L&T/Legrand

All as per item No 33 herein before but 4 way complete all as specified and as directed by Engineer-in- charge.

All as per item No 33 herein before but 8 way complete all as specified and as directed by Engineer-in- charge.

All as per item No 33 herein before but 12 waycomplete all as specified and as directed by Engineer-in- charge.

M & L in replacement sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB TPN 415 Volts, 4 way concealed in wall such as front cover shall be seen flush with the wall surface all as specified and directed complete all as specified and as directed by Engineer-in- charge. Make : Havells/L&T/Legrand

All as per item No 37 herein before but 8 way complete all as specified and as directed by Engineer-in- charge.

All as per item No 37 herein before but 12 way complete all as specified and as directed by Engineer-in- charge.

S&F in repairs MCB Triple pole and neutral 63/100 Amps working on 415 volts 50 Hz AC supply,10 KA C series complete all as specified and as directed by Engineer-in- charge. Make : Havells/L&T/C&S/Legrand

S&F in repairs MCB single pole and neutral 32/40 Amps working on 240 volts 50 Hz AC supply,10 KA C series including taking out old one complete all as specified and as directed by Engineer-in- charge. Make : Havells / L&T / C&S / Legrand

S&F in repairs MCB single pole 6 to 32 Amps working on 240 volts 50 Hz AC supply,10 KA C series complete all as specified and as directed by Engineer-in- charge. Make : Havells / L&T / C&S / Legrand

S& F in replacement sub main wiring with two single core PVC insulated unsheathed cable 1100 volts FRLS grade with multi strand copper conductor and drawn through and including PVC conduit along with continuous earthing wire but in green colour complete on surface/concealed and connected to common earth dolly of the following size. Note : Three run of PVC cable and one run of PVC conduit shall be measured as one unit length.

4 Sqmm ( 2 single run of 4 Sqmm and one run of 4 Sqmm as earth wire) complete all as specified and as directed by Engineer-in- charge.

6 Sq.mm ( 2 single run of 6 Sqmm and one run of 6 Sqmm as earth wire) complete all as specified and as directed by Engineer-in- charge.

10 Sq.mm ( 2 single run of 10 Sqmm and one run of 10 Sqmm as earth wire) complete all as specified and as directed by Engineer-in- charge.

4 Sq.mm ( 4 single run of 4 Sqmm and one run of 4 Sqmm as earth wire) complete all as specified and as directed by Engineer-in- charge.

Supply and fix in replacement LED Bulb 07/09 watt thread type 3000k/6500k complete all as specified and as directed by Engineer-in- charge. Make SYSKA /Havells/Wipro

Supply and fix in replacement LED Bulb 07/09 watt pin type complete all as specified and as directed by Engineer-in- charge. Make : SYSKA / Havells / Wipro

S&F in replacement Tube rod T-5, 28 watt complete all as specified and as directed by Engineer-in- charge. Make : SYSKA / Havells / Wipro

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with tri colour 3000/4000/6000 K, 100 lumen/watt, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge. Make: Halonix/Havells/Crompton or equevalent

Supply and fixing in replacement PVC gang box suitable for one switch 5 Amps with screw and necessary arrangement complete all as specified and as directed by Engineer in Charge.

All as per srl item No. 48 above but for one 15 amps switch socket outlet complete all as specified and as directed by Engr-in-Charge.

M & L for rigid non metalic PVC medium grade conduit in repairs including junction boxes, tee, bends, elbows, reducers bell mouth tube ends,fixing accessories such as couplers, lock Nuts, saddle pipe hook etc for 25 mm dia.ISI Marked complete all as specified and as directed by Engineer-in-charge.

M & L for PVC casing caping medium grade including, tee, bends, elbows, ends,fixing all accessories etc for 20 mm . ISI Marked complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in deep for foundation of pole/stay/cable etc and getting in soft/loose soil complete all as specified and as directed by Engineer-in-charge

Returning refiling including spreading, leveling, watering and well raming in layers each not exceeding 25 cm thickness complete all as specified and as directed by Engineer-in-charge.

Removing surplus spoil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge.

Sand cushioning for under ground cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable all as specified and directed by engineer-in-charge.

Supply and lay well burnt as class ‘B’ bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trench all as specified and directed by engineer-in-charge.

Supply and laying GI tubing light grade of size 80 mm dia with all fitting for protecting the cables in tranches,floors,on poles,in walls complete all as specified and as directed complete all as specified and as directed by Engineer-in- charge.

All as per item No 57 above but with size 40 mm dia

Supply,laying, jointing,testing LT cable 1100 volts grade, PVC insulated armoured and PVC sheathed with stranded aluminium conductor heavy duty, including cable glands, cable lugs etc. to suit the cable size, laid in trenches, fixed along the poles bare or through G.I. Pipe laid under floors road etc; fixed concealed in walls encased in G.I. Pipe etc. complete of following sizes:-

LT Cable 10 Sq mm, 2 core complete all as specified and as directed by Engineer-in- charge.

LT Cable 25 Sq mm, 4 core complete all as specified and as directed by Engineer-in- charge.

LT Cable 35 Sq mm, 3.5 core complete all as specified and as directed by Engineer-in- charge.

LT Cable 70 Sq mm, 3.5 core complete all as specified and as directed by Engineer-in- charge.

LT Cable 95 Sq mm, 3.5 core complete all as specified and as directed by Engineer in Charge.

LT Cable 185 Sq mm, 3.5 core complete all as specified and as directed by Engr-in-Charge.

Taking down and disconnecting of old unserviceable LT U/G cable of any type and size from various side and removing to store for taking credit (credit for above items should be made as per conditioned separately) Complete all as specified and directed by Engineer-in-Charge.

Taking down and disconnecting of old unserviceable street/flood/post top/garden/bollard light fittings of any type and size from various side and removing to store for taking credit (credit for above items should be made as per conditioned separately) Complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement of flood light 150 watt, high power LED 6000K New Generation Energy Saving PCGLF T1 150 Power coated PDC Aluminium body with toughened glass visor. Efficacy > 100Lm/w. in 5700K CCT. IP66 , suitable for highlighting architectural features orretail spaces complete all as specified and directed by Engr-in-Charge. Make Polycab Cat No-PARO206015/Philips/Bajaj/CG

Supply & Fix in replacement of flood light 50 watt, high power LED 3000/5700K energy saving, Highly efficient integral type mid power made of pressure die cast aluminium housing with 10 KV SPD, toughned glass, w/o Lens.IP66, suitable for highlighting architectural features orretail spaces complete all as specified and directed by Engr-in-Charge. Make Halonix Cat No-HLFLD-ML17-50-CW/Philips/Bajaj/CG

Supply & Fix in replacement of LED Street Light 45 watt, LUMOS-SUPER Highly LED street light made of pressure dia cast aluminium housing with high power LEDs, lens & toughened glass, IP66, light distribution Efficacy>110Lm/W. 5700K. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V . Make Halonix Cat No-HLSLD-15-45-CWL-R/Halonix/Philips/CG

Supply & Fix in replacement of LED Street Light 60 watt, LUMOS-SUPER Highly LED street light made of pressure dia cast aluminium housing with high power LEDs, lens & toughened glass, IP66, light distribution Efficacy>110Lm/W. 5700K. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V . Make Halonix Cat No-HLSLD-15-60-CWL-R/Halonix/Philips/CG

Supply & Fix in replacement of LED Street Light 150 watt,TOP OPENING Highly LED street light made of pressure dia cast aluminium housing with high power LEDs, lens & toughened glass, IP66, light distribution Efficacy>110Lm/W. 5700K. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V . Make Halonix Cat No-HLSLD-10-150-CWL-I/Halonix/Philips/CG

Supply & Fix in replacement of LED Post Top Lantern 25 watt with die cast aluminium spigot, spun aluminium powder coated top cover, Aluminium PDC heat sink, opal PC diffuser and clear arcylic. IP65, Optics: PC lenses with Toughened Glass, electronic driver with input voltage range of 170 to 280V. Make Halonix Cat No- HLPT-04-25-CW/Philips/Bajaj.

Preparation of old painted surface of steel tubular swaged poles (9 to 11 meter long) with swan neck brackets including junction box and painting with one coat of aluminium paint including painting with black colour paint in alternate strip to 1.5 mtr height from top of PCC coping and marking pole numbers with one coat of synthetic enamel paint and fixing of reflector tape 50 mm wide in alternate layer in three Nos per pole using red and yellow coloured reflector tape of superior quality complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 m wide and depth exceeding 1.5 m and not exceeding 3 m for foundation of pole and getting in soft/loose soil complete all as specified and as directed by Engineer-in-charge

Supply and erect steel tubular swaged poles type 410 SP-31(9 meter long) with 300mm x 300mm x6mm, MS base plate continuously welded to pole, final taper plug, bolts nuts and screws all as specified including two coasts of black bituminous paint internally through out and externally for embedded portion & two coats of aluminum paint over coat of red oxide primer on exposed surface complete (Note- for Item No.71 - Excavation/earthwork in any type of soil/strata, PCC in foundation,plinth block etc. shall be measured and paid separately)

Supplying and fixing 1100 volt grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed of 6 sq mm complete all as specified and as directed by Engineer in Charge.

S&F Sheet moulded junction box one piece hing type fix to base out door type,weather pfoof,fire retardant with four No of Aluminium bus bar current cepacity 20 Amps fixed on Porceline insulator and one No SP MCB 2.5 Amps and one earth points dully mounted in junction box for out going street light,including nuts, bolts, gland lugs etc complete as specified and as directed by Engineer in Charge.

M&L for PCC type D-2 ( 1:4:8) using 40mm graded stone aggregates in foundation and bed plate of electric poles incl neccessory form work and fair finis to exposed surface without using extra cement etc.complete all as specified and as directed by Engineer in Charge.

Supply & Fix in replacement of LED Street Light 150 watt,TOP OPENING Highly LED street light made of pressure dia cast aluminium housing with high power LEDs, lens & toughened glass, IP66, light distribution Efficacy>110Lm/W. 5700K. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V complete all as specified and as directed by Engineer-in- charge. Make Halonix Cat No-HLSLD-10-150-CWL-I/Halonix/Philips/CG

M&L for PCC type B-1 ( 1:2:4) using 20mm graded stone aggregates as in bands, coping etc. including slightly rounded or chamfered angles complete as specified and directed by Engineer-in- charge.

M&L earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm, burried vertically in ground ( earth pit not less than 2.25 m deep below normal ground level) with top edge of plate vertically to a depth not less than 1.5m below ground level, connected to galvanised steel earth lead wire 4.00 mm dia ( 8 SWG) of any length as reqd at site, by means of bolts, nuts, check nuts and washers of galvanised steel, earth lead wire encased in and including 15mm bore G.I. light grade pipe from earth plate upto pole, upto 2.40 M height from GL by means of and including 25 x 3 mm M.S.F.I. Clamps, bolts, nuts and washers etc. and GI Earth lead wire poles/feeders, gang operated air break switches etc. with provision of charcoaldust and common salt packed all around the earth plate, including necessary excavation and earth work in any typeof soil/strata and testing complete all as specified and directed and shown on electrical plate No. 5 of SSR Part I (1991). Note:- GI Wire more than 7.5 m will be measured separately.

Supply & Fix in replacement of weather and vermin proof L.T. feeder pillar box (Main feeder pillar) factory fabricated out door cubicle/kiosk type totally enclosed made out of 3.00 mm thick sheet metal enclosure with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly with painted one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour and bus bar for 3 phase & neutral of 600 Amps capacity mounted on epoxy insulator-01 Set including connecting the following. (i) Incoming 250 Amps, 4 pole - 01 MCCB 36 KA. (ii) Outgoing 125 Amps, 4 pole MCCB 25 KA -02 (iii) MCB DP 40, Amps,10KA, -02

Supply and fixing in replacement MCCB four Pole 630 Amps, 415 volt thermal release bearing adjestable type breaking cap 50 KA, comlete all as specified and as directed by Engineer-in-Charge. Make - Havells/L&T/Legrand.

Supply and fixing in replacement MCCB four Pole 400 Amps, 415 volt thermal release bearing adjestable type breaking cap 50 KA, comlete all as specified and as directed by Engineer-in-Charge. Make - Havells/L&T/Legrand.

Supply and fixing in replacement MCCB four Pole 320/350 Amps, 415 volt thermal release bearing adjestable type breaking cap 36 KA, comlete all as specified and as directed by Engineer-in-Charge. Make - Havells/L&T/Legrand.

Supply and fixing in replacement MCCB four Pole 125 Amps, 415 volt thermal release bearing cap 25 KA suitable for the MCB DB above comlete all as specified and as directed by Engineer-in-Charge. Make - Havells/L&T/Legrand.

Supply and fixing in replacement MCCB four Pole 100 Amps, 415 volt thermal release bearing cap 25 KA suitable for the MCB DB above comlete all as specified and as directed by Engineer-in-Charge. Make - Havells/L&T/Legrand.

S&F MCB TP, 100 Amps, 10 KA 440 volt 50 Hz all as specified ans directed by engineer in- charge. Make: Havells/C&S/Standard

Supply & fix in replacement PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 1.5 sqmm complete all as specified and as directed by Engineer in Charge. Make: Finolex /Plaza/Polycab.

Supply & fix in replacement PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 2.5 sqmm complete all as specified and as directed by Engineer-in- charge. Make: Finolex /Plaza/Polycab.

Supply & fix in replacement PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 4.0 sqmm complete all as specified and as directed by Engineer-in- charge. Make: Finolex /Plaza/Polycab.

Supply & fix in replacement PVC Flexible cable copper conductor, twin core, 1100 volts grade confirming to IS:694/1990 of size 0.75/1.0 sqmm complete all as specified and as directed by Engineer-in- charge. Make: Finolex /Plaza/Polycab.

Supply & fix in replacement PVC insulated Aluminium conductor twin core service cable ISI marked of size 6 Sqmm complete all as specified and as directed by Engineer-in- charge. Make: Finolex /Plaza/Polycab.

Supply & fix in replacement PVC insulated Aluminium conductor twin core service cable ISI marked of size 10 Sqmm complete all as specified and as directed by Engineer-in- charge. Make: Finolex /Plaza/Polycab.

Taking down and disconnecting of old unserviceable LT Panel of any type and size including MCCBs and MCBs for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. Complete all as specified and directed by Engineer-in-Charge.

Supply and fix 4 pole ONLOAD Change over Switch, ui 1000v, 400 amps current capacity , 50 Hz, 415 volts with rupturing capacity 80 KA. Complete. (fixed in main panel) all as specified and as directed by Engineer-in-charge Make: HPL or equivalent

Supply and fix straight joint heatshrinkable type of LT cable for size 25 Sq mm to 35 Sq mm 3.5 core 1100 volts complete all as specified and directed by engineer-in-charge.

Supply and fix straight joint heatshrinkable type of LT cable for size 50 Sq mm to 95 Sq mm 3.5 core 1100 volts complete all as specified and directed by engineer-in-charge.

All as per srl item No. 93 above but size 120 Sq mm to 185 Sq mm all as specified and directed by engineer-in-charge.

All as per srl item No. 93 above but size 240 Sq mm to 400 Sq mm all as specified and directed by engineer-in-charge.

Cutting and trimming of tree branches to clear the over head lines enroute of LT over head lines/feeders (including repairing and jointing of ACSR Conductor if damaged during cutting of trees) and removal of the trimmed branches of tree and deposit the same in waste bins inside the campus complete all as directed by Engineer-in-Charge.

Supply and fixing in replacement of FRP cable junction boxes including bus bar (04 Nos) of existing size including provision for fixing to existing poles with 02 Nos MS clamps of flat 40x6mm suitable size complete with nuts & bolts making connection with cable & including thimbles at suitable size complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement to street light bracket of 1.5mtr long made out of 40mm dia medium grade GI pipe bend to shape at 120 degree & welded at required end including 02 Nos MS clamps of Flat iron 40x6mm complete all as directed by Engineer-in-Charge.

Supply and fixing in replacement of aluminium thimble stud type suitable for size of cable 400 sq mm all as specified and directed by engineer-in-charge.

Supply and fixing in replacement of aluminium thimble stud type suitable for size of cable 240 sq mm all as specified and directed by engineer-in-charge.

Supply and fixing in replacement of aluminium thimble stud type suitable for size of cable 120 sq mm all as specified and directed by engineer-in-charge.

Supply and fixing in replacement of aluminium thimble stud type suitable for size of cable 95 sq mm all as specified and directed by engineer-in-charge.

Supply and fixing in replacement of aluminium thimble stud type suitable for size of cable 35 sq mm all as specified and directed by engineer-in-charge.

Taking down carefully ceiling fans of any size for repair/service/rewinding/greasing and refixing in its original position after necessary repair/rewinding/servicing/greasing etc including connecting up with flexible twin core cable 23/0.0076 from ceiling rose or connector to fan complete and to ensure that ceiling fan should be fix in position in all respect all as directed by Engineer in Charge.

All as per item no 104 above but Exhaust fan complete all as specified and as directed by Engr-in-Charge.

All as per srl item 104 above but for wall mounted fan/ pedestal fan complete all as specified and as directed by Engr-in-Charge.

Hanging/fixing only ceiling fan of any sweep and make after necessary repair/rewinding etc including connecting up with flexible twin core cable 23/0.0076 from ceiling rose or connector to fan complete all as directed by Engineer in Charge.

All as per item No.107 above but Exhaust fan of any sweep complete all as specified and as directed by Engineer-in- charge.

All as per item No.107 above but wall mounted fan/ pedestal fan complete all as specified and as directed by Engineer-in- charge.

M&L for Rewinding of ceiling fan of sweep 1200mm/1400 mm sweep of any make and model with super enameled copper winding wire of same size as per old winding wire and confirming to relevent IS including replacement of insulation material, varnishing, greasing and lubricating, ball baring, GM bushes and replacement of suitable capacity of condenser and testing complete all as specified and directed by Engineer in Charge.

M&L for rewinding of exhaust fan of 12" (300mm) sweep with super enamelled winding wire of same size as per old winding wire and confirming to IS including replacement of insulating material, warnishing, greasing lubricating, ball bearing, GM bushes and replacement of suitable capacity of condenser and testing complete all as specified and directed by Engineer in Charge.

All as per item No 111 above but size of exhaust fan 450 mm sweep complete all as directed by Engr-in-charge.

All as per item No 111 above but wall mounted fan/ pedestal fan complete all as specified and as directed by Engineer-in- charge.

M & L for repair to ceiling fans of 1200 mm / 1400 mm sweep by replacing unserviceable ball bearing No 6201/6202/6203 and suitable capacity of condenser including necessary greasing to the bearings complete all as specified and directed by Engineer-in-Charge.

M & L for repair to exhaust fan/ wall mounted fan/ pedestal fan of of any size by replacing unserviceable ball bearing No 6201/6202/6203 including necessary greasing complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of condencer capacity 4 mfd for exhaust fan/pedestal fan/air circulator fan of any sweep and make complete all as specified and directed by Engineer in Charge.

S&F in replacement of rubber real for ceiling fan complete all as specified and directed by Engineer in Charge.

S&F in replacement of mild steel U clamps including 10 mm dia but, nuts, washers and split pin for ceiling fan complete all as specified and directed by Engineer in Charge.

S&F in replacement of mild steel fan hook made out of 12 mm dia mild steel round bar of suitable size as per existing hook as directed by Engineerin Charge.

S&F in replacement of upper louver conopy of ceiling fan of any sweep, make, modles & size as per existing complete ass as specified and directed by Engineer in Charge.

S&F in replacement of exhaust fan heavy duty 300 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells or in equivalent to Crompton/Bajaj.

S&F in replacement of ceiling fan heavy duty 1200 mm sweep including necessary fixing arrangement for proper fixing/hanging as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells or in equivalent to Crompton /Bajaj.

S&F in replacement of exhaust/ventilating fan heavy duty plastic body 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Model Havells or equivalent of Crompton / Bajaj

S&F in replacement of wall mounting fan heavy duty 450 mm sweep including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells or equivalent of Crompton / Bajaj

Cutting of existing surface/wall for making hole suitable for fixing of exaust fan of required size including 04 Nos mild steel hold fastner and making good the disturbed surface all as specified and as directed by Engineer-in-Charge.

M& L for cleaning of dust, greasing of bearings and painting of ceiling fans with blades and canopys with two coats of super enamelled paint by spray gun machine after filling of cavities with filler, including numbering with black letters complete all as specified and as directed by Engineer-in-Charge. Note: All required Materials are deemed to be included in the unit rate quoted.

M& L for cleaning of dust, greasing of bearings and painting of exhaust fans with blades with two coats of super enamelled paint by spray gun machine after filling of cavities with filler, including numbering with black letters complete all as specified and as directed by Engineer-in-Charge. Note: All required Materials are deemed to be included in the unit rate quoted.

Supply in replacement of blade suitable for existing ceiling fan any sweep and make including testing of ceiling fan complete all as specified and directed by Engineer in Charge.

All as per item No 128 but for wall mounted fan complete all as specified and directed by Engineer in Charge.

S & F in replacement of exhaust fan louver at any size and make all as specified and directed by Engineer in Charge.

Supply,laying, jointing,testing LT cable 1100 volts grade, PVC insulated armoured and PVC sheathed with stranded aluminium conductor heavy duty, including cable glands, cable lugs etc. to suit the cable size, laid in trenches, fixed along the poles bare or through G.I. Pipe laid under floors road etc; fixed concealed in walls encased in G.I. Pipe etc. complete of following sizes:-

2 ft long

2 .5 ft long

M & L for PVC three core sheathed cable with stranded copper conductor of size 0.5 sqmm complete all as specified and as directed by Engineer-in- charge.

Terminal connector 3 way of bakelite complete all as specified and as directed by Engineer-in- charge.

M/S MG GROUP

M/S LADPURIA ENTERPRISES

M/S PRADEEP ENTERPRISES

CHAUHAN ENTERPRISES

M/s Adhikari construction co.

BRIJ MOHAN LAL AND CO.