ROCNO.738/2022/E1KNMT

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete Footing First Depth

Footing Second Depth

Plinth Beam

Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted,etc., complete complying with standard specfication.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) for Footing

Column

Roof Slab

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials) - Ground Floor (For Footing )

Ground Floor

First Floor

Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost)- Upto Basement PLINTH BEAM to BELOW GL

Ground Floor

First Floor

Brick Partition Walls using II class ground moulded bricks of size 9"X43/8"X 23/4" in CM 1:3 using hoop iron reinforcement,it found necessary standard specification including finishing, curing, etc., complete complying with standard specification - 10 SQM

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

(SH: - 5.0 - JOINERY & PARTITION WORKS ) Providing and fixing I Class Teak Wooden Frame & Shutter (Pannels) as per the drawing for Door, windows & ventilators with necessary fixtures and accessories approved by the Architect and client & other sections of approved make confirming to IS fixed with rawl plugs & screws or with fixing clips including necessary filling up of gaps at junctions, at top, bottom & sides, with 4mm glass, all complete as per architectural drawings & directions of Engineer- in-Charge at all levels.(glazing & panelling to be added in the rate). Cost Including spray painting, etc.

Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (one cement, two sand) over 10mm base layer plastering and pointing with white cement neatly as directed etc., complete as per standard specification

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Paving the floor with Vertified Marbonite tiles of stain free nano polish approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on workion.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical char ges, etc. complete (PWD SOR Sl.No 65, P.244)

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete as per standard specification.

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work

Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supply and fixing of Stainless steel (Salem stainless steel) Door frame ( Box section using stainless steel plate of 1.6mm thick) of size 100mm X 60mm with a rebate of 30 / 35mm X 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel holdfast etc.

Providing and laying, spreading and compacting graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63 mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, Stone Dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying and fixing of 25 mm gate valve with, bolted bonnet, inside screw, non rising spindle, conforming to IS : 14846 (Sluice valve)/ASTM A105 (Ball valve) - (PN – 10.0) etc. including necessary fittings & testing of valve joints complete as per direction of Engineer in Charge

PVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for residential and home applications, water pressure in residential areas do not normally exceed the maximum tolerance. (Schedule-40) 20 mm

Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm 'P' os 'S'' trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank.

Supplying and fixing of position of Indian make white glazed earth were wash basin 550mm x 400mm with all accessories such as cost Iron brackets, 32mm dia C.P. Waste coupling, Rubber plug and chain, 32mm dia 'B' class, G.I. Waste pipe, 15mm dia, G.M.Wheel valve, 15mm dia Nylon connection, 15mm dia Brass Nipples, 15mm C.P. pillar tap etc.,

Supply and fixing in position of brass chromium plated screw down Tap 15 / 12mm Dia (Heavy Type) with necessary accessories, , etc.complete complying with standard specifications and as directed by the departmental officers.

Supply and fixing in position of chromium plated stop cock 15mm Dia with necessary accessories, , etc.complete complying with standard specifications and as directed by the departmental officers.

Supply and fixing in position of Porcelin soap dish of size 150mm x 150mm x 50mm with necessary TW plugs, clamps, screws, etc.complete complying with standard specifications and as directed by the departmental officers.

Supply and fixing in position of brass chromium plated towel rail 60cm long and 20mm dia with Brackets with necessary TW plugs, clamps, screws, etc.complete complying with standard specifications and as directed by the departmental officers.

Supply and fixing in position of PVC / Fibre Glass framed 5.5mm thick mirror, shelf type with Hard Board Backing with necessary TW plugs, clamps, screws, etc.complete complying with standard specifications and as directed by the departmental officers.

Supply and fixing in position of Cast Iron Nahini / Floor Trap with stainless Steel Grating with necessary accessories, , etc.complete complying with standard specifications and as directed by the departmental officers.

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

Supplying and laying the following dia un plasticized PVC pipes 6KSC & 10 KSC confirming to IS 4985/2000 and relevant specials including packing the joints with rubber /lubricant fixing ,holding wherever necessary and making good of the dismantled portion with necessary connections etc., complete as directed by engineer in charge.75 mm dia

110 mm dia

Excavating trenches of required width for pipes including excavation for sockets, refilling.and dressing of sides, ramming of bottoms, depth up to 1.1m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

Supply and fixing under ground sump and over head tank Cover with necessary accessories, , etc.complete complying with standard specifications and as directed by the departmental officers. Manhole Cover Size 900x900 mm double seal, air tight, non-slip SFRC cover & frame for manhole

Manhole Cover Size 60 cm x 60 cm(heavy duty) with frame - SFRC

Manhole Cover Size 1000 mm circle type double seal, air tight, non-slipFRP manhole cover with frame

Supply and fixing of Precast RCC(M30) Bio septic tank of 2.25KLD consists of three chambers - sedimentation chamber,Bioprocessing chambe with PP flower media(virgin plastics bio balls) & settling chamber which shall be coated inside and outside of tank with PU paint for extended life of tank up to 25 years. 2nos of manholes of 500mm shall be provided for easy and safety service. Bio-enzyme shall be used which consists of 20 different types of enzymes and bacteria which can develop in both aerobic and anaerobic conditions and this will start to reduce the BOD and COD of the sewage water and the water will loses its hardness during this process and neutralizes the PH between 6.6 to 7.5. The settled sludge shall be self-digestive. Treated water is orderless and colorless and shall be discharged to Garden/Choke pit/connected to existing sewer line.

Supply and delivery of clear water vertical wet type submersible pump conforming toIS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pumpshall be with stainless steel shaft and dynamically balanced bronze or Cast SSimpeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. Thepump shall be directly coupled to a continuos rated two pole suitable wet typevertical squirrel cage induction motor suitable for operation in AC single phase 230V+/- 10 %,50 HZ +/-5 %

Supplying and erecting 2 HP Panel Board Electrical connection charges, delivery pipe connection and other plumbing works including hire charges for Chain pully, Tripod and other Tools and trial run for three days etc.,

Supply and run off pvc insulated and sheathed 4.50 sqmm 3 core flat typr copper cable for submersible pumpset in the borewell including fixing and tying with copper wire and clamping water pipe etc., complete as directed by the departmental officers.

Supply and fixing of 1000 lit HDPE Tank ISI make with all accessories such as Tank Nipple, Washer etc,including cost and conveyance of all materials to site etc, complete as per standard specifications.

Providing Geophysical survey incuding all and conveyance,etc., complete

Drilling 150mm dia [6"] Vertical bore using power drill in hard rock to any required depth as directed by the departmental officers including labour charges for ransporting charges for the rig and support vechicle.

Supply and delivery of 150 mm dia PVC Plain casing pipe etc., complete.as per standard specification

Supply and fixing of 2000 lit HDPE Tank ISI make with all accessories such as Tank Nipple, Washer etc,including cost and conveyance of all materials to site etc, complete as per standard specifications.

Supply of following GI pipes and PVC Special etc.,complete 40 mm dia HDPE Hose pipe(4Kg/sqm)

32 mm dia GI hex nipple

32 mm GI pipe

32 mm dia GM NRV

32 mm dia GI union

32 mm x 20 mm dia GI reducer

20 mm dia GI coupling

32mm dia GI Coupling

32 mm dia PVC pipe (10Kg/sqm)

32 mm dia PVC tee

40mm dia PVC pipe

40mm dia PVC Coupler

40mm dia PVC Elbow

40mm dia PVC Tee

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.

Supply and run off 2 of 1.5 sqmm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS:694/1990 with continious earth connection by means of 1.50 sqmm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departemental officers.

Earthing as per ISI Specification with an earth electrode of 2.1mt class 'B' GI pipe of Dia not less than 40mm and with 20mm Dia copper earth flat of size 125mm x50mmx6mm, with funneling arrangement using charcoat, common salt, G.I.reducer, check nuts etc., and mansonry workhand providing RCC cover slab 38mm thick for the Brick masonry including cost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental officers.

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63A TPNMC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work with PWD earthing

Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door (metal) with 40A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make)

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5 metr

Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mmTW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch withcontinuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour forconcealed power plug point

Supplying and laying of PVC Sheathed amroured LTUG cable of size 2 core calmped on walls

Supplying and Fixing of Cable Gland and termination with earth connection of size 2 core 10sqmm complete as per standard specfication

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered withhylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meterto fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessarymasonry work and with 38mm RCC cover slab for the brick masonry

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making goodof the concealed portion with suitable colour

Supplying and Fixing of 2 X 25 sqmm PVC armoured LTUG Cable in a trench to be excavated at a depth of 0.75 M putting 0.15 M layer of sand and covering the cable completely with bricks and sand refilling the earth to make good

Supplying and Fixing of 4 X 10 sqmm PVC armoured LTUG Cable in a trench to be excavated at a depth of 0.75 M putting 0.15 M layer of sand and covering the cable completely with bricks and sand refilling the earth to make good

Conveyance Instalaltion testing commissioning of Pre wired 6 W LED Down Light fitting suitable for surface complete with all accessories etc

Conveyance Installation testing and commissioning of decorative type 4 mtr length pre wired hanging type 60 watts LED Tube Lights complete with all accessories etc directly on celing using 2 nos hanging rope of length 60 cm properly hooked to steel hooks anchored to the celing and giving connections with required length of 16/0.20 mm 3 core copper conductor flex conforming to revelevant ISS or extending the orginal wiring and giving connection etc as required

Supplying and Fixing Suitable size GI box with modular Plate and cover in front on surface or in recess including providing and fixing 2 Nos X 3Pin 5/6 amps Modular socket outlet and 5/6 modular switch connection etc as required (For light plughs to be used in non residental buildings

Supplying and Fixing Suitable size GI box with modular Plate and cover in front on surface or in recess including providing and fixing 1 Nos X 3Pin 5/6 amps Modular socket outlet and 5/6 modular switch connection etc as required (For light plughs to be used in non residental buildings

Supplying and Fixing 2.0 TR Split TON AC Ton Capacity AC unit with Q KVA capacity automatic Voltage stablizer and MS Stand for fixing out door unit are completed

Supplying and Fixing of 1200 mm Sweep AC Celing Fan with Stepped electronic 300 W regulator with the exiting down rod on the exiting Clamp SD 112

Solutions consists of following components.Make : Canadian Solar/Vikram SolarType : Poly-crystalline Power: 315/320/325/330 Wp (According to Availability)Quantity: 158 No Size : 2000mm x 1000mm (2 meters x 1 meters) Voltage : 440/220Volts On Grid Solar Inverter Make : Delta Inverter (German) Size : 50kW Phase : Three (3 Phase) Quality : Premium Quantity : 1 Unit Output : 440/230 Volts @ 50Hz Monitoring System : Yes (DelREMO-Delta Realtime Monitoring) Type : Wifi/Lan/GSM Mobile Apps : Yes Electrical Accessories (Compulsory) DC Distribution Box: Yes (Fuse+Surge Trap+MCCB Breaker) AC Distribution Box: Yes (Fuse+Surge Trap+MCCB Breaker) Mounting Structure: Type : Aluminium or Galvanized Angle : As per site requirement Design : Customized Wiring & Cabling Make : Polycab Material: Copper Size : 6mm2 Solar Power Output (Generation) Units per Day: 225 kWh Units Per Month : 6750 Units Units Per Year : 72,500 Units DC Side: Armoured Cable MNRE RATES 2021-2022

Supply anrrection of Fire Shield brand' Stored Pressure Fire Extinguisher ISI Marked, Powder type Fire 6 Kg. Capacity Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of6 kg. capacity as per IS:15683 with pressure gauge,discharge hose & control nozzle, wall mountingbracket, safety clip etc., including conveyance, allincidental charges, neccessary scaffolding and re-doingthe dismantled portions to its original conditionwherever found neccessary etc, complete as per standard specification and as directed by theDepartmental Officers. Make: EXCELLENT / SAFETYFIRST / EQUIVALENT

Providing rain water harvesting using 3 nos.of RCC well rings of 90cm inner dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 nos. of 6mm dia MS rod vertically and 3 nos. of 6mm dia MS rod circumferentially tied together with 18 guage binding wire for well rings including necessary earth work excavation 1m dia to a depth of 1m, supplying and filling 40mm HBG inside the erected well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1m dia and 5cm thick which inclusive of cost and fabrication of 6mm M.S reinforcement at 15 cm spacings on both directions and one 6mm M.S rod ties at the edge of the slab circumferentially including cost of moulding, curing, finishing and well placing in position and disposing off excavated earth with all initial leads and lifts in places as shown by the Departmneal officers etc., complete in all respects.

R.C.C.Jolly by a new of following size in R.C.C. 1:1.5:3 using 20mm gauge hard broken granite stone jelly and river sand excluding cost of reinforcement but includingcharges,fabrication charges curing neat finishing and labour charges for fixing the jolly in position with standard spefication

Counter top - Providing and fixing of 2 inch thick natural stone Kadappa equivalent to the prescribed size and shape with cement Grout 1:6 as instrcuted by site engineer

Seating area - Providing and fixing of 1 inch thick natural stone Kadappa equivalent to the prescribed size and shape with cement Grout 1:6 as instrcuted by site engineer

Procuring and supply of chairs as indicated in the drawings High Back Chairs

Office chairs

Reading chairs

Computer zone chairs

Class room chairs

Reading tables - Wooden tables made out of true wooden / seasoned wooden planks cut and crafted to size with necesssary MS structural framework and necessary welding joints

Teaching table - Marine playwood with Laminate finish supported by MS structural frame and joints welded. Accommodate with necessary steel drawers for storage below the table.

Computer table - Marine plywood with Laminate finish supported by MS structural frame and joints welded. Accommodate with necessary steel supports to hold the CPU units with the trolley wheels for the mobility

Book shelves - Providing and supply of book shelves as per the design approved by the engineering division made out of MS steel with powder coating finish with storage capacity upto 6 book racks and upto an height of 2.1mtrs clear

Magazines rack - 18mm thk Marine plywood with laminate finish with various compartments to accommodate the magazines as instructed and approved by engineering division upto height of 2.1m clear

Supply, Delivery & Installation of Desktop (without display) with the following specification including cost of materials and labour charges for installing etc., Technical Specification : Processor - Intel Core i3 Processor (10th Generation Processor & Board)Ram & Storage - 4GB RAM/1TB SATA HDD with DVD Writer, Key Board & Mouse OS – Windows 10 SL

Supplying, fabricating, erecting and fixing Hilux (or)Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level Using Perforated Sheets (10mm thick)

Supplying and erecting in position of following 500 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.

Vino Construction