Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹96.5 LAdmitted-Finance DEVARI KALAN VEERPUR KARCHANA ALLAHABAD ALLAHABAD UTTAR PRADESH 212307 | PRAYAGRAJ | UTTAR PRADESH | 212307 | L1 | Admitted-Finance | |
| 2 | L2₹97.5 L+₹94,522.95 (0.98%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹1.0 Cr+₹4.2 L (4.31%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s Mithilesh Kumar L1 | L.N. MISHRA L2 | aadom infrastructure pvt ltd L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01) | 796.93 | Cu.M | 136.5 ₹1,08,781.22 Lowest | 180 ₹1,43,447.76 | 146.25 ₹1,16,551.31 |
| 2.00 | River Bed Fine Sand filling in plinth including supply of necessary quantity of fine sand from outside the UPPTCL premises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work.(CSI No. 4.05) | 71.68 | Cu.M | 1,069.6 ₹76,666.79 Lowest | 1,100 ₹78,845.8 | 1,146 ₹82,142.99 |
| 3.00 | Clearing jungle including uprooting of rank vegetations,grass, bush, wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPTCL area cleared. (CSI No. 4.08) | 177 | Cu.M | 5.6 ₹991.2 | 4 ₹708 Lowest | 6 ₹1,062 |
| 4.00 | Earth filling under floors and/or sub station area including cost of earth when obtained from with in 8 km outside UPPTCL area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. (CSI No. 4.10) | 1,630 | SqM | 381.04 ₹6,21,095.2 | 300 ₹4,89,000 Lowest | 324.75 ₹5,29,342.5 |
| 5.00 | Levelling and dressing and making proper slopes including cutting and filling of earth upto a depth 100mm if so required including all labour T&P etc. required for proper completion of the work . (CSI No. 4.11) | 350 | Cu.M | 2.8 ₹980 | 2 ₹700 Lowest | 3 ₹1,050 |
| 6.00 | Concrete with 4cm gauge stone ballast, coarse sand & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No. 5.02) | 74.8 | Cu.M | 4,060 ₹3,03,679.88 | 3,800 ₹2,84,232.4 Lowest | 4,350 ₹3,25,371.3 |
| 7.00 | Concrete with 4cm gauge stone ballast, coarse sand and cement in proportion of 8:4:1 in foundation & under floors including supply of all materials, labour & T&P etc. complete. (CSI no. 5.04a) | 157.31 | Cu.M | 4,345.6 ₹6,83,606.34 | 3,800 ₹5,97,778 Lowest | 4,656 ₹7,32,435.36 |
| 8.00 | Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work. (CSI No. 5.06) | 18.08 | SqM | 5,045.8 ₹91,228.06 Lowest | 6,800 ₹1,22,944 | 5,620.5 ₹1,01,618.64 |
| 9.00 | Concreting of 40 mm thick RCC trench covers in mild steel frame work with RCC 1:1.5:3 in Cement, coarse sand and 2cm gauge graded hard stone ballast with 3mm thick floating coat of neat cement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. (CSI No. 5.18) | 123.06 | Cu.M | 264.12 ₹32,502.61 Lowest | 300 ₹36,918 | 279 ₹34,333.74 |
| 10.00 | Cement concrete with 2cm gauge approved hard stone ballast, coarse sand and cement in proportion of 3:1.5:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work (CSI No. 5.21) | 58.89 | Cu.M | 5,574.1 ₹3,28,258.75 Lowest | 6,800 ₹4,00,452 | 5,972.25 ₹3,51,705.8 |
Tender Value
₹1.3 Cr
EMD Value
₹2.7 L
Closing Date
5 Apr 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE (Civil)
57 GEORGE TOWN PRAYAGRAJ
increasing capacity
2023_UPCTL_780914_1
63/ECTC,PRG/2022-23
Open Tender
Civil Works
Percentage
120 days
Prayagraj
REFER TO TENDER DOCUMENTS
2 documents required · 2 mandatory
₹11,800
PNB A/c No. 8832005900000016 IFSC PUNB0883200
₹2.7 L
12 Apr 2023
6 Mar 2023
6 Apr 2023
6 Mar 2023
5 Apr 2023
6 Mar 2023
Amount
Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01)
River Bed Fine Sand filling in plinth including supply of necessary quantity of fine sand from outside the UPPTCL premises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work.(CSI No. 4.05)
Clearing jungle including uprooting of rank vegetations,grass, bush, wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPTCL area cleared. (CSI No. 4.08)
Earth filling under floors and/or sub station area including cost of earth when obtained from with in 8 km outside UPPTCL area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. (CSI No. 4.10)
Levelling and dressing and making proper slopes including cutting and filling of earth upto a depth 100mm if so required including all labour T&P etc. required for proper completion of the work . (CSI No. 4.11)
Concrete with 4cm gauge stone ballast, coarse sand & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No. 5.02)
Concrete with 4cm gauge stone ballast, coarse sand and cement in proportion of 8:4:1 in foundation & under floors including supply of all materials, labour & T&P etc. complete. (CSI no. 5.04a)
Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work. (CSI No. 5.06)
Concreting of 40 mm thick RCC trench covers in mild steel frame work with RCC 1:1.5:3 in Cement, coarse sand and 2cm gauge graded hard stone ballast with 3mm thick floating coat of neat cement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. (CSI No. 5.18)
Cement concrete with 2cm gauge approved hard stone ballast, coarse sand and cement in proportion of 3:1.5:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work (CSI No. 5.21)
RCC work with cement, approved coarse sand (FM 1.8 to 2.5) and 2cm gauge graded approved hard stone ballast in proportion 1:1½:3 in RCC lintel of doors & windows excluding supply of reinfor-cement and its bending but including its fixing and binding the same with 24 BWG G.I. binding wire and including necessary centering & shuttering including supply of all materials, labour and T&P etc. required for proper completion of work. (CSI no. 5.23)
Same as above CSI No. 5.23 but for lighter beam i.e. heaving span up to 6m. (CSI No. 5.25)
Same as above CSI No. 5.23 but for Raft foundation. (CSI No. 5.27)
Same as above CSI No. 5.23 but for T-beam slab and cloumn. (CSI No. 5.29)
Supplying and filling 75 mm to 115 mm size bolders in chilling tank complete including supply of all materials, labour and tools and plants etc. required for proper completion.(Voides 30 % shall be deducted during measurement). (CSI No. 5.30)
First class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work (CSI No. 6.03)
First class brick (class-150) work in 1:4 cement and coarse sand (F.M.1.8 to 2.5)mortar in S/S thickness of wall not to be less then 1 brick (230mm) thick including supply of all materials, labour and T&P etc. required for proper completion of work. CSI no.( 6.03+6.07+6.08 )
First class brick (class-150) work in 1:4 cement and coarse sand (F.M.1.8 to 2.5)mortar in S/S thickness of wall not to be less then 1/2 brick (115mm) thick including supply of all materials, labour and T&P etc. required for proper completion of work. CSI no.( 6.03+6.07+6.09)
S/Fixing of double action floor springs including cutting in floors / RCC slabs and grouting the same with C.C. & finishing the surface properly as and where required under aluminium doors as per direction of Engineer-in-charge. including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.55)
Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work. (CSI No. 8.60)
Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01)
TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) (CSI No. 9.03)
Supply and fixing rolling shutters of approved make made of 80x1.25 mm. Gauge cold rolled M.S. lathes inter locked through out their inner length and joined together at the end by end lock guides & arrangements for inside and outside locking with push &pull operation complete but excluding the cost of top cover & springs. CSI No. 9.08)
P/F 27.5cm. long wire spring grades 2 for rolling shutters. (CSI No. 9.09)
Providing and fixing top cover rolling shutters. (CSI No. 9.10)
Providing & fixing ball bearing for rolling shutters. (CSI No. 9.11)
Supply of 28 mm. dia M.S. Anchor bolts (conforming to IS 266) 900 mm. long with base plate (75x75x6mm) welded with anchor bolts including its threading upto a length of 10cm. and also supply of a pair of galvanized standard nuts with threading including supply of 5 mm thick washer and cost of labour, material & T&P for proper completion of work(CSI No. 9.12)
Fixing and grouting 28 mm and above dia bolts in proper alignment level and setout with help of a template complete including supply of all labour & T&P etc. required for proper completion of the work.(labour rates only) . (CSI No. 9.13)
Supply of 25 mm dia.M.S. Anchor bolts (conforming to IS-226) 500 mm long with base plate(50x50x6 mm)welded with anchor bolts,including its threading upto a length of 10cm. and galvanizing upto 15cm from top, also supply of a pair of galvanized standard nuts with threading including supply of 5mm thick washer and cost of labour material and T&P etc. required for proper completion of the work. (CSI No. 9.14)
Fixing and grouting 25 mm and below dia M.S. Anchor bolt in proper alignment level and setout with the help of a template including supply of all labour T&P etc. reqd. for proper completion of the work. (labour rates only) . (CSI No. 9.15)
Providing M.S. Frames work, rack etc for R.C.C. Trench covers and edging with M.S. angles and M.S reinforcement including cutting, bending and welding as per approved drawing. The rate is including cost of all labour, materials etc. as required for proper completion of the work. (CSI No. 9.20)
S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work . except cost of M.S angle and flat. (CSI No. 9.22)
S/F in position 90 lbs M.S. Rail for transformer plinth including cost of all labour, material and T&P etc. required for proper completion of the work. (CSI No. 9.26)
Fixing and grouting of trench edging in proper level and alignment including cost of all labour, and T&P etc. required for proper completion of the work but excluding cost of C.C. (labour rates only) . (CSI No. 9.30)
Fixing of template in position level and alignment for grouting of Anchor bolt in main gantry (labour rate only). (CSI No. 9.31)
Same in item 9.31 above but for auxiliary structure. (labour rate only). (CSI No. 9.32)
Fixing of cable trench racks in proper position and alignment including cost of all labour, material and T&Petc. required for proper completion of the work (Labour rate only). (CSI No. 9.33)
Supply and fixing 24 B.W.G , G.C. Iron Sheet roofing .fixed in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work. (CSI No. 10.01)
12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.07)
Add for extra labour and materials for plaster over rough face of one brick thick wall. (CSI No. 11.12)
S/mixing approved water proofing compound (CICO,DR FIXIT etc) in cement mortar in plaster or concrete work in the proportion as recommended by the manufacturer. (CSI No. 11.15)
Providing (12x15) mm section groove in plaster including all material, labour and T&P etc. required for proper completion of the work. (CSI No. 11.16)
6 mm. thick plaster with 1:3 cement & coarse sand including labour, materials & T&P etc. required for proper completion of the work. (CSI No. 11.17)
Champering the edge of concrete in auxiliary structure, of size 25 mm wide in triangular section including all materials, labour & T&P etc complete. (CSI No.11.18)
3 mm thick floating coat of neat cement finish including supply of all materials, labour and T&P etc. required for proper completion of the work. (cement consumtion 0.044 bag/Sqm) (CSI 11.20)
2.5cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (CSI No. 12.02)
Same as CSI No. 12.02 but for 4.0cm thick. (CSI No. 12.04)
Supply of 80 mm thick I shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200X(160+120 mm) with minimum 5 mm thick toping of O.P.Cement mixed with 25% marble powder. The compressive strength of concrete pavers blocks shall not be less than 30 MPa & 4.5 Kg/No. including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge but excluding G.S.T. which shall be paid extra as per rules. (CSI No.12.23)
Painting and varnishing on new wood, or new iron work with one coat of ready mixed priming paint and one coats of approved ready mixed paint (Luxol or equivalent brand or varnish) including supply of all materials, labour &T&P etc. required for proper completion of work (CSI 13.01)
Same as CSI No. 13.01 but for two coat. (CSI No. 13.02)
Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20)
Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22)
Same as in item no 13.22 above but for every coat of additional APEX or equivalent brand weather coat paint . (CSI No. 13.23)
Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . (CSI No. 13.25)
Same as above in CSI no. 13.25 but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint. (CSI No. 13.26)
Painting letters & number over cable trench cover or other places with the help of stencils including painting of base of 150 mm. dia of one coat of primer and two coats of superior quality synthetic enamel paint size of letter to be 60 mm. x 10 mm. including cost of all materials labour and T&P etc. required for proper completion of the work including placing of Trench covers in required position (CSI No. 13.28)
Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres. (CSI No. 15.01)
Dismantling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by the Engineer-Incharge within a distance of 60 metres. (CSI No. 15.03)
Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer In-charge within a distance of 60 metres. (CSI No. 15.05)
As in CSI no 18.12 but C.C. road slab in 1:1.5:3 proportion. (CSI No. 18.13)
Filling of 20 mm. wide 100/150 mm. deep joint with coarse sand and saw dust mixed with hot bitumen etc. complete including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 18.14)
Construction of granular sub-base (GSB) by providing well graded Material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density complete as per the direction of Engineer In Charge. (Taking Output -300 Cum ) CSI No. 18.17
Developing the tubewell by the air compressor having a capacity of 8.5 CuM or by the borehole pumping set having the capacity of 0.7 CuM/sec as per direction of Engineer I/C. (CSI No. 19.01)
Drilling bore from G.L. to 450 M B.G.L., work to be completed as per direction of Engineer I/C .(CSI No. 19.04c(i) 0BGL to 90 BGL
from 90 M BGL to 120 M BGL. (CSI No. 19.04c(ii)
from 120 M BGL to 150 M BGL. (CSI No. 19.04c(iii)
Lowering of tube well assembly alongwith shrouding with pea gravels, testing, verticality of Tube well and washing of the tube well from G.L. to 180 Meter B.G.L. the cost including all labour, materials, T&P required for proper completion of work but excluding the cost of slotted pipe/ plain M.S/PVC.pipe assembly and Pea gravel.(CSI No. 19.05(i) From 0 GL to 90m BGL
from 90 M BGL to 120 M BGL. (CSI No. 19.05(ii)
from 120 M BGL to 150 M BGL. (CSI No. 19.05(iii)
Providing Plain MS pipe for making tubewell assembly and cartage to boring site, the pipes shall be of TATA / SAIL / Jindal or other ISI marked approved make, including cost of all labour, materials and T&P required for assembly making and proper completion of work. (CSI No. 19.06iv) 200 mm dia M.S.plain pipe 6mm thick
(v) 150 mm dia M.S.plain pipe 4.8mm thick
As in item 19.06 but Slotted MS pipe. (CSI No. 19.07iii) 150 mm dia MS Slotted pipe
Development of tubewell by O.P. Unit (5 HP to 10 HP submersible pump set), including bringing Column pipe for the OP unit, assembling, electric connections, running for required period, dismentling and taking out & carrying away and cleaning the site with cost of all labour, materials, T&P and fuel / Electricity Charges etc required for proper completion of work and as per direction of Engineer-in-charge. (CSI No. 19.14)
Supply and fixing of 150 mm dia M.S. bail plug of heavy quality including all labour material & T&P. (CSI No. 19.17c)
Supply and fixing of 200 mm dia MS top plug of heavy quality including all labour material & T&P. (CSI No. 19.18d)
Supply and fixing of 65 mm dia G.I. ("B" class ) column pipes JTC/ JINDAL make with column coupling socket as required for proper completion of work including all labour material & T&P. (CSI No. 19.22b)
Supply and fixing support clamps for column pipes made out of 50 mm dia MS flats, pairs of bolt-nuts etc complete with all material, labour, T&P. (CSI No. 19.24b)
Supply and stacking pee gravel properly at levelled ground for measurement as directed by Engineer I/C, including all labour, T&P required for proper completion of work. (CSI No. 19.25)
Transportation and installation of tube well drilling Rig m/c, compressure for development and other required equipments and accessories at site of work and dismentlling & taking them back after successful completion of the work including cleaning, levelling - dressing the site properly, also disposing off the surplus earth, silt, sand etc. (CSI No. 19.28)
Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser. (CSI No. 19.31 (e) for 7.5 H.P pump set three phase
Supply & Installation of submersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. (CSI No. 19.32f) three phase 7.5 HP outlet 65 mm dia. or more, Head 57/46, Discharge 24000/30000 LPH
Supply and fixing of submersible cable Havels or equivalent make, for submersible pump complete in all respect. (CSI No. 19.33c) 4.0 mm2 for pump above 3 HP and up to 7.5 H.P.
Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work. (CSI No. 19.34)
Placing of trench cover of all size in proper position including transportation from different places within the S/S area including all labour, T&P etc. required for proper completion of the work as per direction of Engineer - in - charge. (CSI No. 20.11)
P/F80 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross,clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01h)
Same as 26.01a above but for 100 mm dia. CSI No. 26.01i
Providing and fixing SLUICE VALVE, CI 80 mm dia. WITH Wheel. ISS:780 & ISS: 2906 class - I, 'MEC' make, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.11a)
SLUICE VALVE CI 100 mm dia. WITH Wheel. ISS:780 & ISS: 2906 class - I, 'MEC' make, ISI marked(CSI No. 26.11b)
P/F of 110mm dia PVC pipe of 6Kg/Sq.cm for the with special such as tee bend, socket, elbow etc includng supply of all labour, material, T&P etc. Complete requeired for proper completion of work. (CSI No.26.17)
Wiring point for light with 1.5 sq. mm FR PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,modular switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including maching colour wash.(PWD ELE. SCH.2018,131C+187A)
Same as above PSI No.131C but for fan/fresh air fan. (PWD ELE. SCH.2018,133C+187A)
Same as PSI No.131C but for plug.(PWD ELE.SCH.2018, 134C+187C)
Supply and fixing and concealing of 20mm dia,2mm thick PVC conduit pipe with ISI marked embossed and with PVC accessories confirming to IS 3419 for drawing wires duly sealed at joints original resin/adhesive to make the complete piping rigid, plastering with cement sand mortor finished to the level with matching colour wash including supply of all materials, labour and T&P etc.required for proper completion of the work.(PWD ELE. SCH.2018,148A)
Same as above PSI No. 148A but for 25mm dia,2mm thick PVC conduit. (PWD ELE. SCH.2018,149A)
Supply and fixing of 2/3/4 ways round steel junction box confirming to ISS for 20mm dia 16 guage (1.5mm) thick steel conduit concealed in wall, keeping its level upto plaster duly provided with proper size cover screwed as directed at site by Engineer-in-charge with supply of all material, labour & T&P etc. required for proper completion of work.(PWD ELE. SCH.2018,154)
Supply and fixing of 2/3/4 ways round steel junction box confirming to ISS for 25mm dia 16 guage (1.5mm) thick steel conduit concealed in wall, keeping its level upto plaster duly provided with proper size cover screwed as directed at site by Engineer-in-charge with supply of all material, labour & T&P etc. required for proper completion of work. (PWD ELE. SCH.2018,155)
Supply and fixing of switch box 100 x 100 x 50 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw andholes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. (PWD ELE. SCH.2018,159)
Same as item No. PWD ELE. SCH.2018,159 but for 150x150x65 mm size.(PWD ELE. SCH.2018,160)
Same as item No. PWD ELE. SCH.2018,159 but for 200x250x65 mm size (PWD ELE. SCH.2018,162)
Same as item No. PWD ELE. SCH.2018,159 but for 300x450x65 mm size. (PWD ELE. SCH.2018,166)
Supply and wiring of submains with 2 nos. 2.5 sq.mm & with 1 no earth wire of 1.5 sq.mm FR PVC insulated 1100V grade insulated multistrand single core copper conductor cable in existing PVC conduit pipe complete,including supply of all materials, labour and T&P etc.required for proper completion of the work (PWD ELE. SCH.2018,291)
Supply and wiring of submains with 2 nos. 4 sq.mm & with 1 no earth wire of 2.5 sq.mm FR PVC insulated 1100V grade insulated multistrand single core copper conductor cable in existing PVC conduit pipe complete,including supply of all materials, labour and T&P etc.required for proper completion of the work.(PWD ELE. SCH.2018,291A)
S/F of 32 Amp.240 V DP metal clad rewireable type switch fuse unit on MDFEG/Teak wood board including making connections etc.complete all respect.(PWD ELE. SCH.2018,305) CAT-B
Supply and fixing of 63 Amp.415 V metal clad rewireable type switch fuse unit on angle iron bracket including making connections etc.complete all respect. (PWD ELE. SCH.2018,313) CAT-B
Supply and fixing of 0.5 to 5.0 Amp. SP MCB of approved make including making connections etc.complete all respect.(PWD ELE. SCH.2018,1001) CAT-B
S/F of 6/10/16/20/25/32 Amp. MCB of approved make and as per sample approved by E/I (10KA)(PWD ELE. SCH.2018,1002) CAT-B
S/F of 40 Amp. SP MCB of approved make including making connections etc.complete all respect.(PWD ELE. SCH.2018,1003 A) CAT-B
S/F surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect as per direction of E/I. (PWD ELE. SCH.2018, 1022) CAT A
S/F hexagonal fan box with hexagonal/Round g.p. fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded four to eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & Lower cover duly screwed fitted with 300 mm round zink coted M.S. bar X 12 MM & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of the work. (PWD ELE. SCH.2018,1149)
Supplying and fixing electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T & P etc. for proper completion of work to the satisfaction of Engineer in charge of work. (PWD ELE. SCH.2018,1203C)
S&F of LED Tube Light with batten suitable for upto 1 x 22 watt LED tube light complete including tube etc. on surface in all respect. (PWD ELE. SCH. 1413) CAT AAA
L.N. MISHRA
aadom infrastructure pvt ltd
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.35 MB
63DocsforConstructionof220KVIncreasingCapacitySirathuPRG.pdf
Tender Documents • 2.17 MB
BOQ_1295563.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .