SPECIAL REPAIR TO BLDG NO P-01(OFFICE BLDG) OF OLD IMH COMPLEX UNDER GE(A) KOLKATA

Amount

NOTES :The bidders/contractors are advised to read tender document & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.

Chipping of unsound/weak concrete materials from slabs, lintel,chajja, fin, facia etc. by any means as directed by engr-in-charge including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign matrials, loose concrete/aggregate etc for 25mm average thickness and disposal of all debris out of MOD land and complete all as specified and as directed by Engr-in-Charge.

Material and labour Removing of concrete all around reinforcement including from behind the reinforcing bars to give an avrage 25 mm (but not less than 15 mm clear air gap) by manual methods (using wire brushing, chiselling etc) and applying alkaline rust removing chemical followed by removing rust by emery paper and cleaning the area throughly by water and allow it to dry all as per manufacturer,s instruction to give it a totally rust free finished steel surface upto 12 mm dia bar upto complete all as specified and directed by Engr-in-charge.

Supply and application of a coat of Epoxy Zinc rich primer on the prepared steel surface excluding behind the bar by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 complete all as specified and directed by Engr-in-charge.

Material and labour for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm complete all as specified and directed by Engr-in-charge

Material and labour for introducing new reinforcement bars up to 12mm dia for structural connections in RCC Beam, Lintels, Columns and slabs including power drilling holes of appropriate diameter in reinforced of plain cement concrete to a minimum depth of 150 mm and upto 200 mm including power drilling, fixed the reinforcement in position using epoxy of loose dust by blowing air, sealing with epoxy cartridges etc all as spd and directed by the Engr-in-charge.

Supply, mixing and application two component structural grade polymer modified reinstatement mortar, where local spalling has taken place or shuttering is not possible . The mortar can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 upto 25 mm average thickness complete all as spd and directed by the Engr-in-charge NOTE:- Cement and sand morter in proportion of 1:2 graded coarse sand with polymer admixed in proportions approved by Engr-in-charge.

Material and labour for applying curing compound or equivalent, over concrete surface as curing compound as per manufactures instructions complete all as specified and as directed.

Taking down wooden shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each and refixing the same in the same opening complete all as specified and as directed by the Engr-in-Charge.

Taking down chowkhat or frames with shutter not exc. 1.5 Sqm each (without taking of shutters from the frames) complete all as specified and as directed by the Engr-in-Charge.

Taking down chowkat or frames with shutter exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and as directed by the Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by the Engr-in-Charge.

Supply and fix for framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work including ornamental design conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply and fixing factory made UPVC white colour three track three panels sliding window(Three nos. glazed panels) up to 1.50m heightmade of (big series) frame 116 mm x 45 mm & sah 46 x 62 mm both having wall thickness of 2.3 mm ( ± 0.2mm) and single glazing bead / double glazing bead of appropriate dimension (Area of window 1.00 Sqm to 5.00 Sqm) comprising of UPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 160 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate diimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kg), GI fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fushion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and approved quality, complete all as specified and directed by ENgineer-in-Charge. (the rate of glass shall be deemed to be considered in quoted rates) Note:- For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fix 2nd Class HW Plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chanfered, put together with glue pinned at joints all as specified and as directed.

Supply and fixing for 30mm thick factory made flush door shutters solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match, reinforced with MS Sq tube in opening all as shown on drawing and specified and as directed by the Engr-in-Charge.

Supply and fix for factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

Supply and fixing for 75mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for 100mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge.

Supply and fix for 150mm long Aluminium, anodised extruded handle fabricated type, complete all as specified and as directed

Supply and fix for 100mm long Aluminium, anodised extruded handle fabricated type, complete all as specified and as directed

Supply and fixing for 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for 100mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for 250mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

Supply and fix in repair powder coated aluminium Partition wall of frame size 80mm x 38mm (tube)x 3.00 mm thick with including standard beads/glazing clips, locking arrangement etc with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed by the Engr-in-Charge.

Supply and fix for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Supply and fix for powder coated aluminium door shutters, aluminium section (2 mm thick section) weighing not less then 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Supply and fixing for 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exe 0.50 Sqm in each pane complete all as specified and as directed by the Engr-in-Charge.upto 12 storied bldg.

Material and labour for 6mm Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and directed

Supply and fix in repair for Aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Material and labour in repair prelaminated particle board, 18/19 mm thickmess interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed by the Engr-in-Charge.

Supply and fix in repair for 2nd class hard wood Plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3.00 Sqcm & n exc 6.00 Sqcm upto 12 storied bldg.

Supply and fix in repair for curtain rods dicorative aluminium alloy with and including fixing brackets including taking down old pelmet box complete all as specified.

Supply and fixing floor door stopper of aluminium alloy body and tongue with hard drawn steel spring, overall length cover plate 150mm complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing for 30mm width of flap continious piano hinges mild steel,bright finish or electro galvanised complete all as specified and as directed by the Engr-in-Charge.

Supply and fix magnetic catches mm 50 long of any description

Supply and fixing for 75mm Hasp and staple, safety type brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by the Engr-in-Charge.

Material and labour for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc, (cut to ordinary lengths i.e, within 20 mm of the length indicated) Fe 410-W (Gde E-250) quality-A complete all as specified and as directed by the Engr-in-Charge.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete all as specified and as directed.

Material and labour for 15 mm thick rendering on fair faces of brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement, powder coated etc complete all as specified and as directed.

Material and labour for 5mm thick rendering in cement mortar (1:3) on concrete surface as in ceiling and finished the surface even and smooth without using extra cement etc complete all as specified and as directed.

Material & labour for rendering 15mm thick in CM (1:4) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth complete as specified and as directed by Engineer-in-charge.

Supply and fix including taking down of existing, Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC fillets of width 35mm including necessary caping/fillets at top and junctions required as per site etc complete all as per specified and directed.

Demolition of stone slab or tiles of any description or thickness in floors or aprons etc(laid bedded and pointed in any mortar) complete all as specified and as directed.

Material and labour for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, coooking platform and other similar situations complete all as specified.

Dismantling of floor hearth or wall tiling incl cement mortar bedding ( incl backing) and removing debris and rubbish off the premises complete all as specified.

Material & Labour Non skid ceramic tiles, coloured, 7 to 8 mm thick (square/rectangular area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm , in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed layer in CM (1:4) including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushign neat cement slurry complete all as specified and as directed.

Material & Labour Glazed ceramic tiles 450x300/ 300x200 x7 mm(Coloured) on vertical surfaces such as skirting, dados and riser to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete over 10mm thick screed bed vertical layer in CM (1:4)all as specified and as directed.

Material & Labour of vitrified ceramic tiles,double charged, light coloured shade, 10 mm thick of square/rectangular area of each tile not exceeding 0.36 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed layer in CM (1:4)complete including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushign neat cement slurry complete all as specified and as directed.

All as per item No 54 here-in-before but fixed on vertical surface as on skirting including 10mm thick cement plaster in cement mortar (1:4)

Material & Labour of vitrified ceramic tiles, light coloured shade, 10 mm thick of square/rectangular area of each tile not exceeding 0.36 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed layer in CM (1:4)complete including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushign neat cement slurry complete all as specified and as directed.

All as per item No 56 above but fixed on vertical surface as on skirting including 10mm thick cement plaster in cement mortar (1:4)

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

Material and labour and fixed of power coated GI exposed snap grid frame work for false ceiling, size of grid 605 x 605 mm, including GI main tee of size 25mm x 35mmx0.7 mm ( minimum), GI cross tree of size 25mmx 35mmx 0.70mm and GI wall angle of size 25mmx25mmx0.7mm(minimum) suspended form soffit at approx 900mm centre to entre with GI cleat and steel expansion fasteners with and including level clip and 6mm dia GI wire hanging arrangement with adjuster all as specified in drawing in section -8 of SSR part-II and including 6 mm thick high pressure steam cured non asbestos fibre cement designer board as per IS 14862 complete all as specified and directed.

Fixing only for ceiling board in the existing frame completed all as specified and directed

Material and labour for 10 mm thick Gypsum board false ceiling joint less work including application of putty over gypsum board to achieve smooth and joint less celing surface and applying two coat of oil bound distemper in ceiling surfaces including framed work for consisting of 60 mm wide GI steel 'C' section of as in main of 0.71mm thick and 60 mm GI channel section as in cross member of 0.63 mm thick and GI steel angle section as in suspenders of size 25x20x0.63 mm and wire cloth of 0.71 mm dia of wire and 100x50mm aperature size including cutting , riveting, steel fastener, drilling holes in RCC roof and securing with screws etc complete all as specified and directed by Engineer-in-Charge.

Material and labour POP cornice width n.exc 200mm wide in ceiling edge of any design and shape, complete all as specified and directed by Engineer-in-Charge

Taking out/Stripping of old Roof treatment membranes/Tar felt incl layer of cement mortar of any type carefully from roof surfaces (without damaging roof ) and incl preparation of old roof surfaces by picking, sweeping, cleaning and washing down with water to remove dust & receive new treatment (upto 12 storey High of building) complete all as specified and directed.

Material and labour forrendering 15 mm(Avg) thick in Cement Mortar 1:4 finished even and smooth witht using extra cement after preparation of old roof surface with brushing and applied neat cement slurry with 3.0 Kg of cement per Square Metre existing surface complete all as specified and as directed

Supplying and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified in Para 11.44.5 of SSR Part I complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed by the Engr-in-Charge.

Material and Labour for brick work with sub class 'B' brick straight of curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

All per item no 67 above but except brick complete all as specified and as directed.

Material and labour for Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n exc 15 cm thickness (below or above ground level complete all as specified and directed.

Material and labour for 75mm thick PCC (1:3:6), type C2, (using 40mm graded stone aggregate) as in plinth protection / paving, surfae finished even & smooth without using extra cement as complete all as specified and as directed.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and as directed.

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and as directed.

Taking up or down 25mm steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and as directed.

Dismantling cast iron or re-inforced concrete drain pipes of 100mm bore, jointed in cement mortar complete all as specified and as directed by Engineer-in-charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

Material and labour for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar 1:3 to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces complete all as specified and as directed.

Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supplying and laying for 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supply and fix in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed by Engineer-in-Charge.

Supply and fix CI spun pipes with out ears in any length fixed to wall with brackets of 100mm bore including bitummous paints both side complete all as specified and as directed by Engineer-in-charge.

Supply and fix CI bend with door of 100mm bore complete all as specified and as directed by Engineer-in-charge.

Supply and fix CI branch pieces single equal or unequal with door of 100mm bore complete all as specified and as directed by Engineer-in-charge.

Supply and fix CI 'T' of 100mm bore complete all as specified and as directed by Engineer-in-charge.

Supply and fix CI cowl of 100mm bore complete all as specified and as directed by Engineer-in-charge.

Supply and fix 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed by Engineer-in-charge.

Supply and fix 110mm bore PVC(SWR) bend single socket complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 110 mm dia PVC (SWR) junction single, (singleT), equal or unequal fixed to wall upto any height of the building complete all as specified and as directed by the Engr-in-Charge.

Supply and fix 75mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed by Engineer-in-charge.

Supply and fix 75 mm bore PVC(SWR) bend single socket complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 75 mm dia PVC (SWR) junction single, (single T), equal or unequal fixed to wall upto any height of the building complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing as in repair 15mm dia of long body bib cock complete all as specified and as directed.

Supply & fix in repair angular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as directed by the Engr-in-Charge.

Supply and fixing as in repair 15mm dia PVC connection pipe 600mm long with PTMT nuts complete all as specified and as directed.

Supply and fix in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed by Engineer-in-charge.. (upto 12 storey High of building).

Supply and fixing as in repair chromium plated soap dish holder complete all as specified and directed.

Supply and fix in repair towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type complete fixed in repairs with brass chromium plated screw complete all as specified and directed.

Supply and fixing as in repair chromium plated toilet paper holder complete all as specified and directed.

Supply and fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

Supply and fix in repair PVC water closet seat cover heavy duty coloured closed pattern with flat bottom and cover and mild steel CP hinnging device complete.

Supply and fix in repairs Vitreous China wash basin ( white),o flat back/ oval shape (contersunk) etc., size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, and waste coupling complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair for Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed

Supply and fix in repair vitreous china squatting pan of orissa pattern long pan of size 580 mm x 440mm with integral foot rest white with cast iron p or s trap with back inlet including flush pipe of suitable length to connection with existing cistern & make good complete all as specified and as directed by Engineer-in-Charge

Material and labour for PCC M-5(nominal Mix) (using 40mm graded aggregate ) as in filling sunken floor complete all as specified and directed

Supply and fixing in repair concealed 15 mm bore CP stop cock with sliding flange 15 mm all as directed by the Engineer-in-Charge

Supply and fix in repair pillar taps made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as directed.

Supply and fix in repair for cast iron floor traps with steel grating jointing to waste pipe fixed in cement concrete TypeB1 1:2:4 100 mm dia.

Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engr-in-Charge.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on steel surface complete all as specified and as directed.

Material & labour preparation of new steel and iron surfaces of any description area exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide and zinc chrome primer, complete all as specified and as directed by Engineer-in-charge.

Material and labour for preparation of old painted surfaces on walls of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on wall surface complete all as specified and as directed.

Material and labour for 2 mm thick wall care putty on wall and ceiling surfaces as required (in two layers) etc complete all as specified and as directed by Engineer-in-charge. (upto 12 storey High of building)

Material and labour for preparation of old treated surfaces of wall by brooming down or steel wire brushing and applying one coat of white washing on wall surface etc complete all as specified and directed.

All as per item No 117 here-in-before but on ceiling.

Materials and labour for Preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling surface etc complete all as specified and as directed.

Material and labour for Preparation of old plastered surfaces and applying one coat of acrylic washable distemper on walls complete all as specified and as directed.

Material and labour for prepration of new plasterd surface and applying two coat of acrylic washable distamper over a coat of primer over 3mm thich (minimum) putty and complete all as specifed and directed.

Material & labour for preparation on new plastered surfaces of wall and applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over a coat of primer upto 12 storey bldg complete all as specified and directed.

Material and labour for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed.

Material and labour for demolition reinforced cement concrete of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Supply and fix for Framed work of angles, channels or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc conforming to Fe.290.Gde-E-165 including necessary scaffolding required complete all as specified and directed. Note:- This item is taken to make a angle iron or channel frame to lay or fix steel wire fabric and the frame of angle iron or channel needs to embded in existing building walls above 4 to 5 metre at first floor and embeded portion of angle or channel make good with PCC 1:2:4 and cement plaster 1:4

Supply and fix for Welded steel wire fabric of weight per square meter exc 4 supplied and fixed complete to wood or steel members including necessary scafolding required complete all as specified and directed

Supply and fix for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of (Fe-290 Gde E-250 Grade A ) including necessary scafolding required Complete all as specified and directed

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, upto 4 storey bldg all as spd and directed by the Engr-in-charge

Supply and fix Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, upto 4 storey bldg all as spd and directed by the Engr-in-charge

Material and labour for RCC M-20(Nominal Mix) (20mm graded aggregate) Beams cantilevers, bressummers,lintels over 1.5m span etc complete all as specifed and directed.

Material and labour for RCC M-20(Nominal Mix) (20mm graded aggregate) pre cast slabs supported on walls for cup board and Kitchen slabs,manhole cover etc complete all as specifed and directed.

Subtotal of Sch A part-I

SCHEDULE 'A' PART - II FOR E/M PORTION (Sl No __ to ____)

Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. all complete as specified and directed.

M & L for point wiring for light/fan/bell controlled by one switch with 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including galvanized pressed steel sheet (1.0mm thick) sunk modular box suitable for modular cover plate for mounting modular switches, sockets, fan regulators etc. including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including concealing of conduits in walls / floors / ceilings etc. and making good disturbed surface to matching with the surrounding surfaces complete all as specified and as directed .

All as per item No 135 here-in-before but for 3 pin 6 Amps modular socket outlet on the same board with 1.5 sqmm 1100 volt FRLSH PVC insulated stranded copper cable complete as specified and directed.

All as per item No 135 here-in-before but for 5 pin 6 Amps modular socket on the independent board with 2.5 sqmm 1100 V grade FRLSH PVC insulated stranded copper cable complete as specified and directed.

All as per item No 135 here-in-before but for one 6 pin 6/16 Amps modular socket on independent board with 2.5 Sqmm PVC insulated unsheathed copper cable multistrand conductor 11000 volts grade FRLSH and 2.5 sqmm copper conductor cable as earth continuity conductor complete as directed. Notes for item no 135 to 138 : (i) Colour coding of wiring is to be maintained as per standard colour code. Flush steel terminal box, inner plate and front plates shall be measured and paid seperately.

Supply and fixing modular switch 6 amps 230 volt single pole one way complete all as specified and as directed by the Engr-in-Charge.

Supply and fix modular socket outlet 5 pin, 6 Amps, 230 volt, 2 module complete all as specified and as directed.

Supply and fix modular socket outlet 3/3 pin, 6/16A Amps combined 2 module, 230 volt flush type complete all as specified and as directed.

Supply and fixing modular switch 16 amps 230 volt single pole one way complete all as specified and as directed.

Supply and fixing modular White cover plate with frame, 1 module complete all as specified and as directed.

Supply and fixing modular White cover plate with frame, 2 module complete all as specified and as directed.

Supply and fixing modular White cover plate with frame, 3 module complete all as specified and as directed .

Supply and fixing modular White cover plate with frame, 4 module complete all as specified and as directed.

Supply and fixing modular White cover plate with frame, 6 module complete all as specified and as directed.

Supply and fixing modular White cover plate with frame, 8 module complete all as specified and as directed.

Supply and fixing modular White cover plate with frame12 module complete all as specified and as directed

Supply and fixing modular White cover plate with frame 16 module complete all as specified and as directed

Supply and fix bell ding dong AC 230 volts, single pole complete all as specified and as directed.

Supply and Modular Bell push 6A 1 module complete all as specified and as directed by the Engr-in-Charge.

Supply and fix ceiling rose surface bakelite three terminal 65 x 50mm complete all as specified and as directed.

Supply and fix modular eletronics fan regulator step type 120W-2 module AC 240 volt 50 Hz complete all as specified and directed by the Engr-in-Charge.

Taking down carefully old light fittings any size and keep it safe coustody and refixing on completion of wiring properly on the existing place or as per site requirement complete all as specified and as directed.

S & F Wall/surface mounted type LED light fitting batten type complete with LED 1x18-20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed.

S & F in repair LED luminaire 600 mm x 600 mm, 34-36 watt, 220 V AC surface type with high efficiency PMMA diffuser soft glare free light complete with inbuilt driver, suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing 6" round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Taking down carefully ceiling/exhaust fan any size and any type and keep it safe custody from site complete all as specified and directed.

Supply and fixing Five star rated with brushless direct current motor (BLDC) ceiling fans 1200 mm sweep complete with blades, down rods, electronic regulator and accessories, 230 V, Min air delivery 210 CFM with service value 6.00 BEE complete including taking down of old Ceiling fan from its existing position all as specified and directed. Note : Old dismantled unsv Ceiling Fans will be deposited to MES store of AGE E/M-II at turf view for further disposal under departmental arrangements.

Taking down carefully Window/Split AC any size and any type and keep it safe custody from site and refixing on completion of wiring properly on the existing place or as per site requirement complete all as specified and directed.

Supply and fixing flush mounting factory made VTPN 4 way double door MCCB DB,having protection level IP43 suitable for 4 pole MCCB as incomer and TP/SP MCB as outgoing including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing flush mounting factory made VTPN 6 way double door MCCB DB, having protection level IP43 suitable for 4 pole MCCB as incomer and TP/SP MCB as outgoing including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing MCCB 63 Amp, 4 Pole, 415 Volt, AC, 16 KA, Ics = 100% Icu with adjustable thermal setting and spreader terminals, conform to IS/IEC 60947-2 and IEC 60947-2 complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing MCCB 100Amp, Four Pole, 415 Volt, AC, 16 KA, type Ics = 100% Icu with adjustable thermal setting and spreader terminals, conform to IS/IEC 60947-2 and IEC 60947-2 complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing MCB DB SPN 8 ways double door, IP43, including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing MCB DB SPN 4 ways, 230 Volts, double door, having protection level IP43, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing MCB 40 Amps to 63 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge.

Taking down unserviceable sub main wiring any size including conduit/ casing caping and making good to the disturbed surface complete all as specified and directed.

Supply and fix sub-main wiring through concealed conduit for Sub DB's to AC connection with PVC insulated & unsheathed two run of 6 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 6 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through PVC casing caping of suitable size complete all as specified and as directed . Note :1. Two runs of 6 Sqmm and one run of 6 Sqmm cable and one run of casing caping shall measured as one length. 2. Proper Colour coding to be maintained.

Supply and fix sub-main wiring through concealed conduit for main DB's to Sub DB's with PVC insulated & unsheathed two run of 10 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 10 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through PVC casing caping ofsuitable size after and including taking down existing one complete all as specified and as directed. Note :1. Two runs of 10 Sqmm and one run of 10 Sqmm cableand one run of casing caping shall measured as one lengthand proper colour coding also. 2. Proper Colour coding to be maintained.

Supply and fix sub-main wiring including PVC concealed conduit for main DB's to Sub DB's with PVC insulated & unsheathed four run of 25 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith two run of 16 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through PVC casing caping of suitable size after and including taking down existing one complete all as specified and as directed Note : 1. Four runs of 25 Sqmm and two run of 16 Sqmm cable and one run of casing caping shall measured as one length proper colour coding also. 2. Proper Colour coding to be maintained.

Supply and fixing MCB protected AC power unit having 25 Amp Modular type SP MCB, Modular type Motor Starter 25 Amps, Modular type Socket 20 Amps and Plug Top 20 Amps with indicating light, combined in a 6 module plate and suitable size modular box of galvanized steel sheet all as specified and directed.

Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 32 x 6mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed by the Engr-in-Charge.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. with 25 x 3 mm aluminium strip

Supply and fixing Rigid non-metallic PVC conduict 25 mm dia for telephone wire / internet wire exclusive of boxes (junction/ terminal) but clusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. .

S & F Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ₹ 1,49,071.20 mentioned on Page No 39 shall be deducted from the total quoted amount of BOQ.

NIRMAL SALES CORPORATION (BID ID -3378622)

Shree Mahabir Builders (BID ID -3375442)

Hindustan Traders (BID ID -3386167)