COMPREHENSIVE MAINT OF OFFRS AND OFFRS SERVANT QTRS IN ZONE D-E-F IN THE AREA OF AGE B/R-II UNDER GE (WEST) LUCKNOW

Amount

M & L for brick work using fly ash brick conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) including demolition of brick work or stone/boulder masonry complete all as specified and directed

M&L for rendering/plaster by using readymix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar complete all as specified and directed

Repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish complete all as specified and directed

Repair to plaster by using readymix mixture of thickness 5 mm to 7 mm in ceiling including taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish complete all as specified and directed

M&L for preparation of New plastered or unplastered surface of wall and applying two coats of OBD over and including 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of New plastered or unplastered surface of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of ceiling and applying one coat of OBD complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall and applying one coat of white wash complete all as specified and directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L preparation of new /old plastered surface of walls and applying one coat of wall care putty and over two or more coats of 100% Premium acrylic emulsion (weather coat) paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed Note Primer and emulsion to be carried out through air less spray machine (Mechanical means)

M & L for old plastered surfaces of walls and applying one coat of oil bound distemper including preparation of surfaces complete all as specified and directed.

M & L for old plastered surfaces of walls and applying subsequent coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old painted surface of wood and wood based material of any description area exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F 15mm bore steel water tubes "medium grade" galvanized with all fittings such as bends, elbows tee sockets reducer et c and fixed to walls and ceiling in floor including taking down steel tubing and connection 15mm bore, cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, incl cleaning for refixing or removing from site complete all as specified and directed

S&F 20mm bore steel water tubes "medium grade" galvanized with all fittigs such as bends, elbows tee socket reducer etc and fixed to walls and ceiling in floor including taking down steel tubing and connection 20mm bore, cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, incl cleaning for refixing or removing from site complete all as specified and directed

S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed.

S&F in repair 15 mm bore stop valves/angle valve copper alloy, fancy type,chromium plated half turn with screwed down, high pressure with crutch or butterfly handle screwed both ends fixed to GI pipe complete all as specified and directed.

S & F in repairs two way cock/two way angle cock with wall flange matt chrome finish complete all as specified and directed.

S&F in repair Pillar taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe including all accessories complete all as specified and directed.

S & F in repair 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed

S & F in repair wall mixer L-bend type with connecting legs and wall flanges, fancy type brass chromium plated, with closed swinging spout including plugging and securing to walls suitable for 15 mm bore pipe complete all as specified and directed

S & F in repair PVC Syphon Kit with complete fittings for low level flushing cistern complete all as specified and directed.

Supply & Fixing in repair CP shower rose fancy type 125mm thick with or without swivel joints any size including fixed to steel pipe or union complete all as specified and directed

S&F in repair Health faucet Brass mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed

S & F in repair sheet glass shelf assembly consisting of 5.0 mm thick sheet glass shelf 12.5 cm wide and railing 60cm long and fixed over CP brass brackets complete all as specified and directed

S&F in repair 20 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe including testing complete all as specified and directed.

S&F GI Tank Nipple 15mm bore complete all as specified and directed

S&F GI Tank Nipple 20mm bore complete all as specified and directed

S&F GI Union 20mm bore complete all as specified and directed

S&F GI Reducer 15 to 20 mm bore complete all as specified and directed

S&F GI Socket 20mm bore complete all as specified and directed

S&F GI Socket 15mm bore complete all as specified and directed

Taking down tank of ex 250 & n. exc 500 Ltrs capacity and refixing , including float valves as required Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed.

S&F in repair PVC low level white flushing cistern valveless syphonic dual action dual type with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend complete all as specified and directed.

S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.

S & F in repair 300mm long Stainless steel six peg hanger chromium plated as approved complete all as specified and directed

S&F in repair looking mirror of sizr 900X600 mmof thickness 6to8 mm fixed on stainless steel studs fancy type including all fittings complete all as specified and directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.

S & F 10mm thick transparent polycarbonate sheet as in roof covering/cladding to wall, fixed with self tapping screws incl aluminium strip and all necessary fitting complete all as specified and directed.

S&F in repair of 02 nos brackets made out of 40x40x5mm MS angle iron for wash basin etc. complete all as specified and directed.

S&F in repair Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan, pedestal pattern, white, with 'P' or 'S' trap, excluding flushing cistern and flush pipe, with plastic water closet seat cover, white, closed pattern with flat bottom and cover, fixed with MS chromium plated hinging deviceincluding connection to drain pipe (or outgoing pipe) and to flushing pipe etc. and making good to floor complete all as specified and directed.

S&F in repair kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers, waste coupling and waste pipe, including bedding in cement mortar 1:3 to dwarf wall or fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460mm with bowl size 410x330x160mm complete all as specified and directed.

S & F in repairstainless steel Kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed

S&F in repair float / ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.

S&F in repair position rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position including float ball valve 20 mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) all as specified in SSR Part I including dismatling of exisitng tank of capacity ex 250 & n. ex 500 Ltrs complete all as specified and directed

S&F in repair position rotational moulded polyethylene water storage tanks 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position icluding float ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) all as specified in SSR Part I including dismatling of exisitng tank of capacity ex 250 & n. ex 500 Ltrs complete all as specified and directed

S & F in repair 32 mm bore Brass chromium plated Waste coupling for wash basin/sink etc. with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repair plastic water closet seatcover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed

S & F in repair PVC fsolid waste Pipe, having size 31X32X850 mm for WHB /Sink complete all as specified and directed

S & F in repair CP grating doom 120mm dia with/without hole minimum weight 42gms complete all as specified and directed

S & F in repair 25mm dia fancy type drapery curtain rod made of stainless steel including knobs (Latto) and side brackets complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall including bend ,Tee etc complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall including Bend ,Tee complete all as specified and directed.

M&L for premium quality joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and including dismantling of existing tiles complete all as specified and directed.

M&L for ceramic coloured floor tiles shade as approved size 7- 8 mm thick area of each tile not exc 0.36 Sqm set on 15mm thick in near cement screed(1:6) slurry and pointed incl white or colour cement to match including dismantling floor, hearth or wall tiling including cement mortar bedding , removing and rubbish off the premises etc complete all as specified and directed

M&L for ceramic coloured tiles shade as approved size 7- 8 mm thick area of each tile not exc 0.36 Sqm as in vertical surface set on 10mm thick in near cement screed(1:4) slurry and pointed incl white or colour cement to match including dismantling floor, hearth or wall tiling including cement mortar bedding , removing and rubbish off the premises etc complete all as specified and directed

M&L for joint free glazed coloured DIGITAL GLOSSY tiles, superior quality of size 300 x 450 x 7mm thick/300 x 600 x 7mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and dismantling of existing tiles complete all as specified and directed.

S&F vitrified tiles, coloured, superior quality 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 and dismantling of existing tiles complete all as specified and directed.

S&F vitrified tiles, coloured, superior quality 10mm thick (square/ rectangular) polished, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 and dismantling of existing tiles complete all as specified and directed.

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 including moulding, dismantling of existing stone slabsetc complete all as specified and directed

S&F in repair 0.36 mm dia stainless steel grade 304 wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.

S & F in repair /easing steel window shutter size n. exc 1.5 sqm each including fixing of wire cloth of 0.36 mm dia stainless steel grade 304 with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading ,including welding where required, making good for smooth handling , and fixing of missing handles ,tower bolt etc complete and refixing in same opening complete all as specified and directed

S&F in repair 4 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provision of glazing pins in squares not exceeding 0.50 Sqm in each pane including hacking out old broken glass of any description and thickness from wooden/steel frames fixed with wooden beads/putty and complete all as specified and directed.

M & L Welding in repairs n. exc 2.5 cm in length, thickness of metal to be welded n. exc 6mm complete all as specified.and directed.

S&F in replacement of WPC cabinet and cupboard in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick WPC sheet & provision of shutters made out of 18 mm thick one side decorative laminated WPC sheet density not less than 600 kg/ Cum all required brackets SS screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings and required knobs in each shutters as per site requirement and as per make and specification mentioned as per drawing inluding dismantling of existing cupboard complete all as specified and directed

Supply and fixing 30 mm width of flaps continuous piano hinges of Mild steel, bright finish or electroglavanised complete all as specified and directed.

S&F ball catches with 8 mm dia steel ball and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified and directed

S&F 100mm long M S Cromium Plated, hasp and staple, safety type, with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm and removing from site complete all as specified and directed

Taking down chowkhat frame with shutter (without taking out shutter from the frame)exc 1.50 Sqm and n.exc.4.00 sqm and removing from site complete all as specified and directed

Taking down Shutters of any description but exc 1 sqm and n exc 2 Sqm each complete all as specified & directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length .complete all as specified and directed. Note: (i) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made (ii) Rate of M.S. hold fast/ lugs or SS dash fasteners shall be deemed to be included in the quoted rate.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: (i) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made (ii) Rate of M.S. hold fast/ lugs or SS dash fasteners shall be deemed to be included in the quoted rate

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid both side decorative type (Laminated both side) flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.

M & L 30 mm thick Factory made solid WPC (Wood plastic Composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm shall be fixed with 15 x 15 square tube in side rails with screwing 8 x 28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufacture instruction complete all as specified and directed.

Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick "D" Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyed backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48x25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10 mm square guard bars with 6"(152.4mm) pitch, complete for finished item of work including of all taxes, design complete all as specified and directed

Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 110 x 45 mm & sash 40 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension comprising of UPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. (Note-1. Glazed shutters float glass thickness not less than 5.00 mm and wire mesh shutter with Stainless steel (SS-304) wire mesh 0.36 mm dia with aperture 1.4mm shall also be deemed included in quoted rates and No extra payment will be made separalely 2. For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S & F of Stainless steel ISI Mark Butt hinges 100mm size complete all as specified and directed

S & F of 200mm long MS Cromium plated barrel tower bolts of extruted section complete all as specified and directed

S&F of MS Cromium plated sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed

S & F of 200mm size MS Cromium plated handles (As per sample kept in sample room) fancy type, fabricated type, anodised complete all as specified and directed

S&F 'E' board 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be poweder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm abd soaced at 1200mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and justers and screws etc. The last hanger at the end of each main runner shall not be grater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independtly. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour including dismantling of false ceiling and boarding any description all as per manufacture insturction.

M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thicknes and below or above ground level (reinforced) in sub base any type of thickness below or above ground level.complete all as specified

Providing and laying of hard core broken stone/ boulders of gauge n exc 63 mm complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (using 20 mm graded aggregate) in coping, benching, slope etc complete all as specified and directed

Providing and laying of Machine pressed precast concrete rubber moulded interlocking paver block any shape and size of 60mm thickness, M-35 Grade complete all as specified and directed

M&L for Sand filling under paver blocks/floors or in foundations including watering and consolidation all as specified.

Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where directed and providing water proofing treatment of sunken slab in following steps:- (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical Cement + of Nerolac Perma/STP/Asian Confirm to IS 2645 - 9103 as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia PVC Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Perma Butyl tape product of Nerolac Perma/ STP/Asian and grouting around the inserted pipes by porable grout as directed by Engr-in-Charge. (d) Make angle fillets by mixing sand cement and Nerolac Perma Hypercrete/STP/Asian on all corners. (e) Brushing two coats with high performance cementitious elastomeric two components water proofing coating of Nerolac Perma Super 2K/STP/Asian of thickness 1mm in two coats, Above treatment shall be giving upto height 15cm from bottom slab and allow it dry completely. Above material shall be confirm to below properties- 1. Bulk Density - 1.73g/cc, 2. Elongation - 100% as per ASTM D412 (Min) 3.Hydrostatic Pressure - 4bars as per ASTM D 7088, 4. Adhesion to concrete- Greater than 1.5N/mm2, 5. Crack Bridging ability as per AS/NZS 4548.5 Min 1mm. 6. DFT - 1mm in two coats. Seperation Layer- Providing & Laying 120 gsm non woven geo textile membrane over waterproofing coating to protect the coating prior the screed. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with intergral waterproofing compound Cement + of Nerolac Perma as per manufacturer instructions in sunken slab. (g) Fill the sanitary gaps with Nerolac PermaSIKA/Asian sealing compounds complete.

M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate for filling in sunken slab complete all as specified and as directed .

M&L PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in roof kerbs / benching / coving and roof padding over roof surfaces etc rounded or chamfered on edges, complete all as specified and directed.

M & L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) Applying a coat of fibre reinforced PU primer confirming to ASTM D412 @ 30% water dilution on prepared surfaces and allow to dry. (b) Supply and Applying 2 coats of Hybrid PU based elastomeric single component coating over primer surface @ 10kg /10.76 Sqm total comsumption having below properties:- 1. Elongation - 500%-600% 2. Solid contents - 80%, 3.Tensile Strength - 1.6N/mm2 4. Adhesion to concrete - 2.2N/mm2 5. Initial hardness shore strength - 60Min. 6. Tear Strength - 14Mpa. 7. Total thickness of layer shall be 1.2 - 1.5mm. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.

M/s Bhadoria Associates (BID ID -3466171)