REPAIR TO SEWAGE LINE, DRAIN, FENCING AND HARD STANDING AT AIR FORCE STATION MULLANPUR UNDER AGE(I) HIGHGROUND CHANDIGARH

Amount

Material and labour for cleaning of underground sewage lines of 100 mm /150 MM/ 200 mm bore from solid/ liquid/ mud deposited in these lines manually by rodding with sewage drainage rods through connecting manholes and removing sludge to a distance not exc 500 m from outside periphery of defence land including cleaning sludge/ solid deposited from the ends as well as from intermediate manholes coming between these lines taking off & refixing of manholes, complete all as specified and directed. Note: (a) Rates quoted against the items shall deemed to include for all T&P and safety measures of workers/ safaiwalas (b) The lines measured once can not measured again within 3 months. If blocks in the same lines re-occur within 3 months the contractor will clean again & nothing will be paid extra for this.

Cleaning of underground sewage lines of 100 to 300 mm bore by excavation and breaking (minimum two length) and removing the blockage, laying new pipes, re-jointing with old pipes including haunching the new pipes with PCC (1:3:6), type C-2, using 40 mm graded aggregate in all locations where cleaning is not possible otherwise complete all as specified and directed. Note: Rates quoted by contractor shall deemed to be inclusive of necessary excavation, returning filling and disposal of excavated soil.

Removal blockage from water closet (Indian or Europen style) by removing solid/liquid or mud deposited in the trap or CI pipe line by roding manually and removing the slugge duly covered in hygenic manner to a distance exceeding 150 m and not exceeding 200m and making the water closet fully functional complete all as specified and directed.

Removing blockage from from floor/ nahani trap of kitchen, bathroom & washbasin by removing solid/ liquid or mud deposited in the trap or CI pipeline by rodding manually and removing the sludge (outside MOD land duly covered in a hygienic manner) to a distance exceeding 150 metre but not exceeding 250 metre and making the WC fully functional, complete all as specified and directed.

Notes applicable for items 3 & 4 :- (a) One safaiwala alongwith supervisor of contractor will attend complaint cell of AGE (I) Highground daily at Mullanpur Air Force Station at 08:30 hrs for complete tenure of contract including extension period if any, to collect the complaints and submit the complaint slip duly signed by user at 16:30 hrs the same day. It shall be the responsibility of contractor to ensure completion of complaints on daily basis.The quoted rate by the contractor against this item shall deemed to be included the cost of the aforesaid manpower. (b) Recovery of Rs 500/- per day if safaiwala is found absent. (c) Contractor shall be solely responsible for ensuring and supplying all the safety measure required by the safaiwalas during the currency of contract. (d) All waste material shall be disposed off outside MOD land. (e) The contractor will ensure the cleaning/clearing of all the complaints (irrespective of Nos) within 24 Hrs of its raising by deploying additional sfaiwalas if required. Nothing extra will be paid on this account. (f) The rates quoted in the above items includes cost of all the T&P like rods, bamboos, etc & safety measures, contractor shall be solely responsible for supplying all the T&P and safety measures required by the safaiwalas during currecny of contract. (g) A recovery of Rs 50/- per complaint per day will be made from contractor for complaints pending for more than 24 hours of its raising.

Cleaning & clearing of solid/liquid mud/any type of solid content including mud,brick bats,empty containers of any type, polythene or any similar items deposited in underground sewage lines 100 to 600 mm bore laid in entire area (domestic as well as tech area) under Air Force Station Mullanpur and any depth upto 8 metres including manholes/inspection chambers of any size and any depth, using SUPER SUCTION MACHINE TRUCK MOUNTED HAVING SUCTION CAPACITY 1000 TO 4000 CUM/HRS, JETTING PUMP WITH WORKING PRESSURE AT LEAST 120 BAR having facilities of high presssure water thermoplastic fibre braided water jetting hose and through conical/round shape nozzler pipe, bottom surface of manholes/inspection chambers & sewage lines should be visible after cleaning process. Sludge /sludge water/any type of waste recovered from sewage lines/manhloes/inspection chambers shall be disposed off at authorised dumping site declared by local administration outside Ministry of defence land complete all as specified and as directed. NOTE:- (i) Payment shall be made to the contractor as under:- (a) 70% after cleaning/clearing the line. (b) 20% after three months (from the date of cleaning) (c) 10% (after four months from the date cleaning of line) or payment in final bill as applicable. (ii) Lines once cleared will be maintained through out the period of the contract. If there is any blockage during the period of the contract, the same will be cleared without any extra cost by the contractor. (iii) In case of any blockage is observed /found in any cleared line through super suction manchine during the time period of contract and it becomes necessary to clear the sewage line with machine, the same shall be cleared through manchine by the contractor without any extra cost to the department. The line shall be cleared by the contractor within 48 hrs after intimation to the contractor. The rate quoted by the contractor against this item shall be deemed to be inclusive of clearance of lines twice or more time as required during the whole contract period.

Cleaning, desilting of septic tank/ manholes from solid/ liquid, mud and removing sludge to a distance not exc 500 m from the outside periphery of defence land complete, including pumping out liquid and liquid sludge with pump arrangements complete all as specified and directed. Note: Rates quoted by contractor shall deemed to be inclusive of T/P required for execution of this item.

Cleaning, desilting of Sewage lift well diameter 5 mtr & depth 6 mtr (approx)from solid/liquid/mud etc and removing sludge out side of defence land complete including pumping out liquid and liquid sludge with pumping arrangements, labour and machine as required for takingout solid sludge from the well, icluding blocking the adjacent manhole to prevent water flow in to the well, complete all as specified and directed.

Cleaning, desilting of Sewage lift well/tank size 2.5 mtr x 1.5 mtr x 3 mtr (approx) from solid/liquid/mud etcafter removing cover slab and fix in position after cleaning, removing sludge out side of defence land complete including pumping out liquid and liquid sludge with pumping arrangements, labour and machine as required for removing solid sludge from the well, cutting of any vegitations inside etc complete all as specified and directed.

Cleaning, desilting of static water tank of size 10 mtr x 10 mtr x 3 mtr (approx) from solid/liquid/mud etc and removing sludge out side of defence land complete including pumping out liquid and liquid sludge with pumping arrangements, labour and machine as required for removing solid sludge from the tank, complete all as specified and directed.

Demolition of brick masonry work (in foul condition) built in cement mortar including all quoins, arches, pillars, staging etc. and removal of rubbish outside MOD land, complete all as specified and directed.

Material and labour for brickwork (in foul condition) with using subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4), including taking down man hole cover and replacing the same on the same opening after the work is completed complete all as specified and directed.

Material and labour, brickwork (in foul condition) using retrieved subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4), including taking down man hole cover and replacing the same on the same opening after the work is completed, except bricks, complete all as specified and directed. Note : Old serviceable bricks retrieved from demolition vide srl item No 11 here-in-before shall be reused after proper cleaning & washing etc.

Material and labour brick work with sub class 'B' bricks , laid on edges of floor or drain, bedded and jointed in CM (1:4) complete all as specified and directed.

Material and labour for brick work with sub class 'B' brick straight orcurved on plain exceeding 6m mean radius as in half brick thick wall in CM(1:4) complete all as specified and directed.

Material and labour for brick work with sub class 'B' brick straight orcurved on plain exceeding 6m mean radius as in half brick thick wall in CM(1:4), except brick complete all as specified and directed. Old serviceable bricks retrieved from demolition vide srl item No 11 here-in-before shall be reused after proper cleaning & washing etc.

Material and labour for PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in copings, kneelers, apex stones, bed plates, kerbs etc incl necessary form work complete all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces of wall and the likes including racking out joints, hacking for keys scrubbing down with water etc any description including removal of rubbish outside MoD land, complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:4), on brick/concrete surfaces of walls, finished fair and even\ complete all as specified and directed.

Material and Labour for Raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc in cement mortar including flush pointing to brick walls in Cement Mortar 1:4 (also incl removing rubbish off the premises and keeping the surface to pointed wet for 2 days prior to re-pointing), complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation of manholes, laying sewage pipes or for drains etc. not exceeding 10Sqm on plan & not exceeding 1.5m in depth and getting out including trimming sides and leveling bottom surfaces, watering & well ramming to the required level/slope, complete all as specified and directed.

Demolition and breaking up drain pipes 150 mm/200mm(Salt glazed store ware AC or reinforceconcrete) set in cement mortar, including removing rubbish out side MOD land complete as specified and directed

Material and labour for PCC (1:4:8) type D2 (using graded aggragate) bed for drainpipes including packing under and haunching against the pipes of sides after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

Material and labour for PCC (1:4:8) type D2 (using graded aggragate) bed for drainpipes including packing under and haunching against the pipes of sides after they are laid and tested for 200 mm bore pipe complete all as specified and directed.

Material and labour, RCC pipes 150mm dia, class NP2, laid on concrete bed and jointed in cement sand mortar (1:1), and tested, complete all as specified and directed.

Material and Labour for Reinforced concrete pipes, 200 mm bore, class NP2 with one collar per length of pipe complete all as specified and directed.

Material and Labour for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Returning, filling in (excavated soil), including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, complete all as specified and directed.

Removing surplus excavated material (soil) to a distance exceeding 250m but not exceeding 500m and depositing where directed, complete all as specified and directed.

Material and Labour for Plain cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in Surface channels and drains including necessary formwork & moulds complete all as specified and directed.

Supply and Fixing of Factory made Precast Circular Manhole Cover (dia 600mm)/Rectangular Manhole Cover (size 600mm x 600mm) having minimum thickness 75 mm with collar Medium duty having capacity not less than 10 Metric Ton complete all as specified and directed.

Dismantling fencing / wire mesh, any type complete all as specified and as directed.

Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete,brick work, masonry etc, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Excavation in posts holes (or similar holes) each not exceeding 0.5 cubic metre, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 metre and making good surface in soft/loose soil, complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete, complete all as specified and directed.

Supply and Fix Mild Steel angle iron or other flat or round sections cofirming to Fe-290 Gde E165 as required for posts or struts in fencing including cutting at top and bottom to shape as directed, including welding the cut portion at top, drilling holes, notching for wire, etc. mild steel round bar 6 mm dia nibs, connecting struts to posts with 2 Nos. mild steel bolts 50 mm long 10 mm dia and washers, complete all as specified and directed.

Supply only MS galvanized fencing, any size or type complete all as specified and directed. Note : Fixing shall be measured and paid separetly.

Fixing only chain link MS galvanized fencing of any size with GI wire including line wires any mesh, size and type to any type of standars rails, straining bolts,etc incl provision of binding wire, complete all as specified and directed.

Supply and fix 10mm dia MS round bars including welding with necessary lapping confirming to Fe 290 Gde E-165, complete all as specified and directed.

Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long with diameter of shank 5 to 10mm all as specified and directed.

Matearial and Labour for preperation of new steel surface of any description, not exceeding 10cm in width or girth when unconnected and applying two coat of synthetic enamal paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coats of red oxide on new steel surfaces over 10cm width or girth including preparation new surfaces complete all as specified and directed.

Material and Labour for preparation of old painted steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint as on concertain angles/fencing angles etc, complete all as specified and directed.

Dismantling of barbed wire fencing of any description and removal to store for credit, complete all as specified and directed.

Supply and Fix Galvanised two strands, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and directed. Note: Each line of wire to be measured

Fixing only and restraining, resecuring incl making good staples etc, (Galvanised two strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing) to any type of standard rails including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and directed. Note: Each line of wire to be measured. Old wire retrieved under item 44.00 will be used under this item.

Taking down steel gates from its position and repair the same including thorughtining alignment properly including welding additional stiffner, brases, pintol hinges locking arrangement etc and erecting the same back in position , including PCC 1:2:4 for fixing hinges, area of each leaf of gate n.exc 6.5Sqm each complete all as specified and directed. (Note : Necessary MS sections such as angle, pipe, bars, flats etc will be measured and paid seperately)

Material and labour for mild steel as in framed work of doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing similar work conforming to Fe-290 Grade E-165, complete all as specified and directed.

Demolition of stone slabs and PCC tiles of any description or thickness in floors aprons etc, laid beded and pointed in any mortar and revoming the rubbish outside of MoD land, complete all as specified and directed.

Demolition of PCC in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish out MoD land complete all as specified and as directed.

Material and labour, factory made, precast concrete, machine pressed, interlocking paver block any shape and size, ISI marked, conforming to IS 15658-2006, of 60mm thickness, M-35 Grade, with grey cement and no pigment , laid over and including 25mm thick fine sand cushioning and joints filled with fine sand, complete all as specified and directed. Note: 1. Rate includes supply and spreading of sand. 2.The shape/size of paver blocks shall be as approved by the AGE (I).

Material and labour for precast cement concrete 1:2:4 type B1 using 20mm graded aggregate as in kerb stone machine made of size approved by GE made to shape slightly rounded or chamfered as directed set and pointed in CM 1:6 as in road side/hardstanding kerb stone incl necessary excavation returning filling and disposal complete all as specified and directed.

Applying two coats of synthetic enamel paint over a coat of primer on concrete surfaces, over 10cm width or girth, including preparation ,complete all as specified and directed.

Materaial and Labour for coloured chequered cement concrete tiles 400x400x25mm thick,factory made ISI marked (IS 13801-1993), with grey cement and no pigment., laid with neat cement slurry @ 3 kg/sqm over and including 20 mm thick screed bed of cement mortar (1:6) pointed in white cement with matching colour pigment, complete all as specified and directed.

M&L for 100 mm thick cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in Sub floor, sub base, floor and pavings etc laid in alternate bays including necessary form work, finishing surfaces of concrete topping even and fair (without using extra cement), complete all as specified and as directed.

Material and labour, Plain Cement Concrete (1:4:8), type D-2, using 40mm graded crushed stone aggregates, as in sub base of pavement laid to required gradient and slope, incl necessary form work, complete all as specified and directed.

Taking out silt, gravel bounders, vegetation grass from complete chocked and blocked and fully filled up Nallah/ Culvert with revoming the silt rubbish to distance exc 150m but n.exc. 500m complete all as specified and as directed.

Note: The total amount shall subject to adjustment of credit of Rs 5250.00 for old Materials as per Schedule of Credit

MS FUTEC ENGINEERS