OR-DPP Works for 9th Mile Bypass Road , NH -10, L-5.57 Km under, NH Division in the state of Sikkim.

Amount

ROAD MAINTENANCE

Provision of Labour for site prperation of potholes, including trimming of side slopes considering 2 nos of labour are required

Tack coat (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at required rate on the prepared bituminous/granular surface cleaned with mechanical broom.) inclusive of carriage Dry and Hungry Bituminous Surface

Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects)inclusive of carriage

Maintenance of Earthen shoulder (filling with fresh soil) (Making up loss of material/irrregularities on shoulder to the design level by adding frsh approved soil and compacting it with appeopriate equipment.)inclusive of carriage

Clearing of road side vegetation, overgrown grass including removal etc. along existing roadsite and disposal of cut bushes.

Hill Side Drain Clearance (Removal of Earth from the Choked Hill side Drain and disposing it on the valley side )(considering clearance 2 times a year)

ROAD PROPERTY MAINTENANCE

Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory signs as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting , 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by the means of properly designed foundation with M15 grade concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 90 cm equilateral triangle

Carrying out routine maintenance to all types of road signs complete as directed by the Engineer and Maintenance Standards Clause 3.4 of the bid document.

Road Marking With Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and Laying of Hot apllied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from steaks and holes.)

Clearing slab/box type culverts and pipe culverts including clearing, cleaning and reshaping of upstream and down stream faces of these culverts within right of way. The job includes disposal of excess material recovered from site including vegetation outside ROW with all leads and lifts complete in all respects as per direction of Engineer-in-Charge. and as per Maintenance Standards Clause 3.1 (Frequency of cleaning will be one time in a year i.e. before start of monsoon). a) Slab/Box Type Culverts

SUN SHINE OVERSEAS PVT LTD