Construction 900 Beded District Civil And Superspeciality Hospital, Nurses Training Center and Hostel Buildings At Civil Hospital Complex Thane, Tal.and Dist. Thane. (Providing, Fixing and Supplying Furniture)

Veneer Finished False Ceiling Providing & Fixing Vineer False Ceiling made up of 19 mm thick BWP (IS710) Grade plywood of requisite manufacture i.e Anchor/Century/Green ply, base fixed to framing of plywood vertical members suspended from ceiling at the inerval 600mm c/c as per approved design & Drawing and finish with 4 mm thick Natural Vineer (IS-1326) of primum quality by approved design and finally finished with melamine polish. As directed by Engineer incharge.

Laminated Plywood Partition Providing and fixing 75 mm thick partition wall constructed with framework made from aluminum square sections 50 (B) x 50 (W) x 2.3 (T) mm size, spaced at 600 mm center to center both vertically and horizontally fixed with aluminium corner angle cleat 50 (B) x 50 (W) x 2.3 (T) . The framework shall be covered on both sides with 12 mm thick BWP (IS 710) grade plywood of approved make Anchor, Century, Green ply or equivalent, finished on both faces with 1.25 mm thick Laminate. The work shall include all necessary hardware, fixtures, adhesives, and accessories, executed as per approved drawings and directions of the Engineer-in-Charge.

Providing and fixing solid core flush door shutter in single leaf 39 mm thick of exterior grade as per detailed drawings made up of 19 mm block board covered with 9mm plywood on both faces, Laminate with 1mm thick on both faces or as directed, all necessary beads, mouldings and lipping, , mortise lock, 150mm chromium plated handles on both sides, Door Closer, Door Stopper, 6mm toughnned glass for vision pannel completed.

Charcol louvers Finished Acoustical Wall Panneling Supply & installation of wall panelling made of Charcol grade Pvc board / fiberglass board louvers made of a composite material comprising charcoal powder, high-grade polystyrene or PVC, resins, and protective additives. Panels shall have a core working blend of charcoal powder, resins, and additives for structural integrity, with a protective top layer for moisture, termite, and mold resistance,backlined with Sound texblack acoustical fleece, tongue-groove edge for a seamless look, Acoustics NRC 0.65-0.75 (For E300* Mounting), size 128x2440x12mm, volume density of base board 800 -830 Kg/m3, 10-10.5Kgs/m2 (L32),Panel thickness: 12 mm,Panel width: 120 mm (0.12 to 0.15 m),Panel length: 2400 mm (2.4 m to 3 m),Finish: Matte/Satin/Glossy.The Panneling shall be finished as per the drawings and to the satisfaction of the Engineer in Charge.

Veneer Finished Wall Panneling Providing and fixing 4 mm thick veneer finish wall paneling fabricated from 18 mm thick plywood, with a plywood framework size of 50 x 36 mm (finished size) or as per site conditions, arranged at 600 x 600 mm center to center or as required. The framework shall be covered with 12 mm thick plywood of approved manufacture such as Anchore / Century / Green Ply or equivalent, generally conforming to IS 710-1980. The panels shall be finished with 4 mm thick matching natural veneer of approved color in satin walnut groove-matched veneer pattern and design, including melamine polishing and design, all complete as per the Architect’s drawings and instructions of the Engineer-in-Charge.

Laminate Finished Acoustical Wall Panneling Providing and fixing in position acoustical paneling consisting of 12 mm BWR (IS 710) plywood and 1.5 mm laminate of approved make Green ply, Century, Anchor for plywood and Greenlam, Century, Merino for laminate finish, mounted on 50 x 50 mm Sal-wood frame spaced at 600 x 600 mm center to center, securely fixed to the wall with wooden supports of required length; voids within the framework shall be filled with 50 mm thick 1000 GSM synthetic wool, supported by chicken mesh on the wall side; the framework shall be covered with fixed 12 mm plywood and finished with 1.5 mm thick laminate. The work shall include all required cut-outs, decorative moldings, finishing trims, painting, and scaffolding as per Architectural and Acoustical Designs and in accordance with the instructions of the Engineer-in-Charge, complete with all materials, labor, tools, and accessories necessary for satisfactory completion.

High Back Chair Providing & Arrangemnt of Featherlight/Wipro or equivalent High Back, Construction & Materials -Backrest: High back with micro‑linear mesh, contoured frame, integrated height‑adjustable lumbar pad.Seat: Fabric‑upholstered moulded cushion with seat‑sliding (depth adjustment) mechanism.Headrest: Cushioned, fixed (non‑height‑adjustable) headrest integrated with back.Base & castors: 5‑star nylon base with 60 mm PU castors.​Ergonomic & Functional Features Mechanism: Multilock synchro‑tilt with: Recline lock lever.Tension knob to adjust recline force.​Lumbar: Height‑adjustable lumbar support pad to fine‑tune lower‑back support.Armrests: Four‑way adjustable arms (height up / down, front / back, left / right, swivel) for forearm/shoulder support.Height: Pneumatic gas‑lift seat‑height adjustment lever.Dimensions & Weights (From manufacturer spec sheet for Helix High Back.)Chair weight: 23 kg.Seat size: Depth 52 cm, width 51 cm.Overall footprint: Width 67.5 cm, depth 58 cm. Overall height (back): Minimum 122 cm, maximum 198 cm.Seat height adjustment: Minimum 45 cm, maximum 56 cm.Arm‑to‑arm clear width: 46 cm.Armrest height above seat: 18 cm. as directed by Engineer in charge.

Mid Back Chair Providing & Arrangemnt of Featharlight/Wipro or equivalent Mid Back chair, Construction & Materials Backrest: Micro linear weaved mesh, ventilated medium back (no headrest).Seat: Fabric‑upholstered cushioned seat with sliding (seat‑depth adjustment) mechanism.Base & castors: Nylon 5‑star base with 60 mm PU castors.Ergonomic FeaturesMechanism: Multilock synchro‑tilt with tension control knob to adjust recline force.Lumbar: Height‑adjustable lumbar support pad integrated into back frame.Armrests: Four‑way adjustable arms (height up–down, front–back, left–right, swivel) for forearm support while typing.Height: Pneumatic gas‑lift seat height adjustment with lever operation.Dimensions & Weights (Helix range; medium‑back uses these values with 1 kg lower weight than high‑back.) Chair weight: 22 kg (medium back). Seat size: Depth 52 cm, width 51 cm. Overall footprint: Width 67.5 cm, depth 58 cm. Seat height adjustment: 45 cm (min) to 56 cm (max). Back/overall height range: Approx. 107–180 cm for medium back (spec tables list a combined min/max height of 122–198 cm for the series, but medium‑back is lower in practice; use manufacturer drawing if you need exact back panel height). Arm‑to‑arm width: 46 cm. Armrest height: 18 cm above seat, as directed by engineer in charge.

Visitor Chair Providing and supplying on site visitors chair with round 2 mm. thk pipe frame with chrome finish with reinforced pipe inserts having moulded seat and back with nylon back cover with PP armrest hanging back fabric etc. complete.

Auditorium Chair Supply, delivery, and installation of Auditorium chairs of requisite manufacturer Wipro/ Godrej / Penworker featuring an ergonomic plush seat and backrest made from moulded polyurethane foam upholstered in durable fabric or polypropylene, supported by a powder-coated mild steel frame securely fixed to the floor with a 4-bolt flange system for stability. The chair includes a push-back mechanism with auto tip-up seating and a Fluimatic slider for smooth adjustment, with seat dimensions approximately 500–580 mm width, 400–500 mm depth, and 400–450 mm seat height, maintained within ±5 mm tolerance. It incorporates an integrated foldable writing tablet made from high-pressure laminate or ABS plastic measuring approximately 268 mm by 292 mm, mounted on a swivel hinge for ease of use on the aisle-side armrest. All metal components are finished with durable powder coating to ensure longevity and ease of maintenance, making this chair suitable for auditoriums, lecture halls, and conference rooms requiring comfortable seating with integrated writing surfaces. including Hardware material, Fixing Adhesive,labour, etc complete as directed by the Engineer-in-Charge.