Supply and Fixing of Aluminium Partion Wall,Computer,Table and Chair in Zone -1 Office (UGSS section) in Pammal - Zone 1,TCMC

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9)grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental office

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using adhesive along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail andbottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

provision for Aluminium Grill door of Standard Pattern (Diamond Shape) - 10mm thick including 'F' (or) 'H' Section

Supply and installation of Stainless Steel Wall panels (SS Clip-in), square/square bevel edge panels, unperforated, Stainless steel (304 grade) core ceiling panels, 600x600x0.5mm having weight 4kg/m2, installed on wall using strut system and Spring-T. The Strut framework systems indudes Strut CC25 thickness 0.55mm, length 3600mm, knurled web 35, depth 25mm and equal flanges 15mm is fastened to wall positioned horizontally in a regular manner at 600mm centres. Then fasten Hold-on wall clamp by suitable fasteners on Strut CC25, at 600mm centres both ways. Strut Spring-T is then held in position byhold-on damp vertically @ every 600mm centers. SS Clip-in tiles 600x600x0.5mm are then clipped into Spring-T. Technical Parameters Fire (Class) - 1 Climate (°C, RH) - 50, 99 Green (VOC, RC %) - Low, 25 as directed by the department officers. The cost includes, cost of material, cost of labour, Scaffolding, Transportation, Conveyance Etc. complete complying to standard specication.

Provision for Desktop computer Intel Core i7 Processor, 8 GB RAM,512 GB SSD, Windows 11,14th Gen, key board, mouse with 21 inch Screen

Provision for 450mm wall mounting air circulator fan

Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting

Chair