REPAIR PERIODICAL MAINTENANCE AND SERVICING OF VARIOUS LIFTS INSTALLED AT PH I AND PH II BLDGS INCLUDING ALL CONNECTED ITEMS AT MH KHADKI UNDER GE MH AND RH KHADKI

Amount

Part - I (Comprehensive maintainence of lifts) Routine maintenance and repair including renewal/replacement of electrically operated lifts with center opening auto door of Make – OTIS 20 pers passenger capacity (1360 Kgs) serving ground plus upper three floors (G+03) for a period of eleven month, with power operated door simplex collective control system including up keeping lifts and its accessories, electrical & mechanical system, safety devices and replacement of defective parts as mentioned hereinafter for the lifts installed at at MH PH-I bldgs. without attendant including carrying out the daily check and periodical services of fully automatic electric lift with power operated door duplex collective control system with replacement of unserviceable parts such as bearings, bushes, all type of shoes, headers, hangers, door cards, door locks, control cards, control connectors, hall push buttons, hall push button covers, rewiring of motors, welding of cracks/broken MS parts, repairs to door, safety edge working at any principle and any type of sensor or mechanical, safety lock, magnetic lock or contact, cop buttons, car position indicator, door sill, car door sill, necessary wiring and cable as per requirement for safe operation of lift cabin light fitting etc. complete to ensure safety and smooth operation of lift (Total 04 No’s lifts)

Routine maintenance and repair including renewal/replacement of electrically operated lifts with center opening auto door of Make – ECE 26 pers passenger capacity (1768 Kgs) serving ground plus upper four floors (G+04) for a period of eleven month, with power operated door simplex collective control system including up keeping lifts and its accessories, electrical & mechanical system, safety devices and replacement of defective parts as mentioned hereinafter for the lifts installed at MH PH-II bldgs. without attendant including carrying out the daily check and periodical services of fully automatic electric lift with power operated door duplex collective control system with replacement of unserviceable parts such as bearings, bushes, all type of shoes, headers, hangers, door cards, door locks, control cards, control connectors, hall push buttons, hall push button covers, rewiring of motors, welding of cracks/broken MS parts, repairs to door, safety edge working at any principle and any type of sensor or mechanical, safety lock, magnetic lock or contact, cop buttons, car position indicator, door sill, car door sill, necessary wiring and cable as per requirement for safe operation of lift cabin light fitting etc. complete to ensure safety and smooth operation of lift (Total 06 No’s lifts)

Routine maintenance and repair including renewal/replacement of electrically operated lifts with center opening auto door of Make – ECE Goods lift of capacity (2000 Kgs) serving ground plus upper four floors (G+04) for a period of eleven month, with power operated door simplex collective control system including up keeping lifts and its accessories, electrical & mechanical system, safety devices and replacement of defective parts as mentioned here in after for the lifts installed at MH PH-II bldgs. without attendant including carrying out the daily check and periodical services of fully automatic electric lift with power operated door duplex collective control system with replacement of unserviceable parts such as bearings, bushes, all type of shoes, headers, hangers, door cards, door locks, control cards, control connectors, hall push buttons, hall push button covers, rewiring of motors, welding of cracks/broken MS parts, repairs to door, safety edge working at any principle and any type of sensor or mechanical, safety lock, magnetic lock or contact, cop buttons, car position indicator, door sill, car door sill, necessary wiring and cable as per requirement for safe operation of lift cabin light fitting etc. complete to ensure safety and smooth operation of lift (Total 02 No’s lifts)

Note for Item No. 1.01 to 1.03 :- (i) One coat of synthetic enamel painting will be done for the lift equipment i. e. motor, gear box, control panel etc. (ii) This schedule does not include the items covered under Sch A Part - II (iii) All the items required to ensure the smooth and perfect working of the lifts other than those covered under Sch A Part - II shall be deemed to be included in this schedule. (iv) All expenditure for minor material & labour, T&P shall deemed to be included in quoted amount. (v) Major materials shall be measured and paid separately under relevant items of schedule 'A'. (a) Inspection of lift by government lift inspector for worthiness certificate during the currency of contract agreement within due first three months including load testing as per lift act and submitting the worthness certificate all as directed by Engineer-in-charge for the lifts as per schedule for Sl No 1.01 to 1.03. Note for Item No 1.01 to 1.03 Inspection of Lifts shall be carried out by Govt lift inspector for worthness certificate during the current agreement within first 3 months including load testing as per Lift Act. (b)The maintenance certificate to be duly signed by contractor and concerned Engineer-in-Charge for every month, (c) The lift mechanic to collect the complaint register daily and on completion/rectification of complaint the register will be updated and signed. (d) Contractor should provide one Skilled Lift mechanic and one helper for 24 Hrs in cycle. Being hospital priority, If any lift gets stuck/blocked/unserviceable at site, within 10 min the lift mechanic should attend the complaint and the complaint to be resolved without any further delay. Incase the problem could not be solved, due to major breakdown / fault the matter to be informed to the contractor as well as to the MES authorities. (e) Further if the Contractor failed to provide Skilled Lift Mechanic and helper at the time of any Lift complaint given telephonically, verbally or in written by MES authorities a recovery @ of Rs.300/- per hour wef the time of lodging the complaint till completion of 24 hrs will be recovered from the Contractors dues. Also in case of any Lift gets repair for want of Spares the Contractor should provide the spare parts in time to make the Lift serviceable failing recovery shall be done from the Contractor as per clause. (f) The Contractor should keep all the spare parts intact for the above mentioned Lifts in the Lift Rooms. (g) The major spares required in major fault and breakdown required during repairs for the servicibility of the lift will be measured and paid as in the schedule Part-II

PART - II ( Repairs / Major Spares for Item of Part - I) 2.01 For New Micro Processor control panel as per existing make

V3F Drive 15 HP as per existing make

ARD 15 HP as per existing make

Reed switch magnet assembly

Final & Terminal limit switchs

RCR set suitable for OTIS Make

Maintenance Box

Display cable

Drive Stop pencil reed

Magnet Pata & Final Camp

Car door drive

Car door drive formator

Door sensor

UPS for lift motor of capacity 10 HP

UPS for lift motor of capacity 15 HP

Battery 12 V/ 17 AH

Battery 12 V/ 26 AH

Micro processor base card

Power supply card

Transformer 9 Volt

Transformer 15 Volt

Transformer 300 Volt 110 AC

Safty card

8 Relay card.

5 Relay card.

4 Relay card.

Power realy card with relay

Bridge Card

Voice Card

Seaker

Contactor 25 Amps

Contactor 32 Amps

MCB 2 Pole 32 Amps

MCB 4 Pole 63 Amps

SPP Unit for control panel

COP Display card

LOP Display card

Limit Switch for up and down

Inspection Box

Junction Box

Magnet Round

PVC Grips

Cable hanger

Pencil Reed

Reed switch sensor

PVC cooper cable 0.75 Sq mm single core

PVC cooper cable 1.5 Sq mm single core

Auto door lock

Travelling Cable 12 Core x 0.75 sq mm

PIT switch

Landing Push Button Plate wall mounting

COP Box wall mounting

Fan for lift cabin

Blower

Emergency Alarm

Gear Oil

Acralic Sheet

Floor Matting for each lift (thickness of mat not less than 4mm)

Car Guide rails 16 mm

Counter weight guide rail 9 mm

MS Auto door complete set

SS Auto door complete set

MS Car door header complete set

SS Car door header complete set

Gear Box unit set of capacity 10 HP

Gear Box unit set of 15 HP motor

Governor set for lift control

Usha Martine wire rope 13 mm

Governor rope 08 mm

Bull Dog clip 13 mm

Bull Dog clip 8 mm

Attending breakdown / fault of lift with in the one hour from call around the call as when required upto the comfortable working of lift as the patients will travell in the lift and up to the entire satisfaction of user complete all as specified and directed. Note:- (i) incase failure of attending major breakdown / fault within 01 Hour from intimation will be charged 1000/- panelty per hour to the contractor on account of delayed attending the fault. (ii) Each lift fault will be count as a seperate Job. (iii) Quotated rate shall be deemed inclusive of special tools required to attend the breakdown / fault (iv) Major Spares used in breakdown will measured and paid seperately as supply only in relavant item of schedule (v) Normal item like grease, oil, cotton waste nominal nut bolt used in breakdown / fault is inclusive in quotated rate. (vi) Safety norms as per the govt guideline is to be followed by he workers during executing of the work. Contractor should ensure that all workers are having safty belts, gloves, Helmet etc. (vii) Any loss to the govt property while executing the job will be beared by the contractor. (viii) The contractor should submit the educational and experience document of site supervisor to whom deputed to attend the complaint at the time of sample approval, without qualified engineer contractor not permitted to work on lift and crane.

Disconnecting the unserviceable earthing and M & L for earthing for Lifts complete with copper earth plate electrode 60cmx60cmx3.15mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to copper strip 20 x 3 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR Part -I 2009 connected to earting test point all as specified complete with excavation & earth work, PCC pit with 50mm thick RCC cover (grade M-15) having suitable handle (10mm MS Rod) 20mm dia GI pipe medium grade ISI marked watering pipe with GI funned with wire mesh 40mm bore GI pipe medium grade ISI marked for protection of earth lead conductor all as specified and as directed and testing on completion. All as specified and as directed and testing on completion.

Supply and replace copper strip of size 20 x 3 mm for extenstion of earthing all as specified and as directed by Engineer-in-Charge.

M & L for aluminium chequered plate for lift floor of thickness 4mm after dismantling the old matting floor from the lift (sie of floor as per the lift compartment floor) and fixing the chequered plate with proper fixing arrangements complete all as specified and as directed by Engr-in-Charge. Note: The rates are inclusive of all T&P required for fixing the chequered plates in the existing floor of the lifts

Veer High Tech Solution (BID ID -3451329)

Shree Elevator Engineering Co. (BID ID -3449743)

Monarch Enterprises (BID ID -3450828)

Escon Elevators Pvt Ltd (BID ID -3451381)

Bidder Name

Shree Elevator Engineering Co.

Monarch Enterprises

shakti engineering and electrical works

Escon Elevators Pvt Ltd

Veer High Tech Solution