ADDN / ALTN OF BATHROOM IN BLDG NO DS-27, 28, 29 AND 30 OF 2 TRG BN AND PROVN OF LIGHTINING CONDUCTOR IN UNIT MAGAZINE, KOTE OF AOC CENTRE UNDER GE SOUTH SECUNDERABAD

Amount

Demolition of un reinforced cement concrete above ground in roof slab/sunken portion of WC/Bath n.exc 15 cm thickness complete all as specified and as directed.

M & L for rendering 10mm thick in CM 1:3 on concrete surface while concrete is green including mixing W.P compound @ 3% by weight including finished the surface smooth and even without using extra cement complete all as spescified all as specified and as directed. Note:- WPC will be measured and paid separately

M&L priming the plastered roof surfaces with bitumenous primer @ 0.30 kg over applying hot bitumen VG-30 1.2kg/Sqm and applying APP based polymeric membrane weighing 3 kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/per sqm) and on primed surface by forced torch application over that applying bitumen base alluminium Paint 0.2 Kg/Sqm complete all as spescified all as specified and as directed.

M&L 40mm Thick PCC (1:2:4) Type B1 by using 20mm graded stone aggregate as in roof with water proofing compound , where required over slab and necessary form work and finishing the exposed surfaces fair even without using extra cement all as specified and as directed. Note:- WPC will be measured and paid separately.

M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished even and smooth without using extra cement. After plastering the sunken surface, sunken portion to be filled with water and tested for 72 hrs (after required peirod of curing) to observe leakage/seepages, leakge/seapage if any shall be arrested by pressure grouting and re-tested till leakages/seapages completely stopped. after ponding test, the surface shall be dried and bottom and sides of the sunken slab shall be treated, priming the plastered surface with bituminous primer conforming to IS-3384 @ 0.3 kg per Sqm and applying a tack coat of industrial butiumen 85/25 @ 1.2 kg per Sqm over which applying using glass fibre base bituminous felt type II and grade 2 (conforming to IS-7193 1994) and applying one coat of hot blown bitumen of grade 85/25 @ 1.2 kg per Sqm including 450mm long 25mm dia medium grade GI pipe shall be provided at the lowest portion Spout pipe should be 200mm from the external face of wall for draining out water in case of leakage. The joints in CI/GI/PVC pipes, nahani traps, WC and P/S trap connection shall be made leak proof. The gap around the pipes in walls/beams shall be properly filled and sealed with water proof joints fillers all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:4:8 type D-2 using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and directed. .

Demolition of brick work or stone/boulder masonry built in cement mortar including all quions arches pillars etc complete all as specified and directed.

M & L for brick work with sub class "B" bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M and L 75mm th PCC 1:3:6 type C-2 as in plinth proctection finished even and fair complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spescified all as specified and as directed.

M & L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of Each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors incl 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spescified all as specified and as directed.

M & L 25mm thick cement concrete type B-1 1:2:4 (12.5mm graded aggregate) as in sub base complete all as spescified all as specified and as directed.

M & L glazed ceramic coloured tiles in vertical surface 300x200x7mm ) thick set and jointed in neat cement slurry including 10mm thick for backing coat for tiles in CM 1:4 all as specified and as directed

Demolition of cement concrete in ground floors n.exc 15 cm thick (below or above ground level) complete all as spescified all as specified and as directed.

Taking down plastering on brick wall& ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete all as spescified all as specified and as directed.

M&L Rendering 10 mm thick cement plaster in CM 1:3 on concrete surfaces on ceiling incl finishing even & sommth w/o using extra cement complete all as spescified all as specified and as directed.

M&L Rendering 15 mm thick cement plaster in CM 1:6 on concrete surfaces on wall incl finishing even & smooth w/o using extra cement complete all as spescified all as specified and as directed.

M&L for 15mm thick rendering on brick wall or concrete surface in cement mortar 1:4 with water proofing compound surfaces finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound will be measured and paid separately complete all as spescified all as specified and as directed.

M&L for Preparation of new plastered surfaces of walls and applying three coat of white wash on walls complete all as specified and directed.

M&L for Preparation of old plastered surfaces of walls and applying two coat of white wash on walls complete all as specified and directed.

M & L for applying three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed.

M & L for preparation of new plastered or unpastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M & L complete removal of exisitng treatment and applying two coats of cement base paint over one coat of primer complete all as spescified all as specified and as directed.

Supply only water proofing compound all as specified and directed.

Taking down chowkats of frames with shutters (without taking of shutters from the frame) n.exc 1.50 Sqm Each complete all as spescified all as specified and as directed.

All as per item No. 25 above but exc 1.50Sqm and n.exc 4.00 Sqm Each complete all as spescified all as specified and as directed.

S & F second class hard wood factory made panelled shutters 35mm thick, (2 panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces as per IS 1003 (Part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete with profile size 105 x 60mm, and made of 1.25m thick, mild steel sheet complete all as specified and as directed by Engr-in-Charge.

M&L for PCC for filling hollow of steel frames type B0 (1:3:6 )(using 12.5mm graded aggregate etc complete all as specified and directed.

S & F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tales complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame as per manufacturers instructions and as directed by Engineer-in-charge complete all as spescified all as specified and as directed.

S & F steel windows or ventilators, fixed type, with glazing bars all as specified and directed.

S & F mild steel door bolts plate type stove enamelled black with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts four on bolt plate two on staple length of bolt 300mm long complete all as spescified all as specified and as directed.

M & L for framed work such as grills, gratings etc with ends of bars, framed guard bars, ladders etc and similar works complete all as spescified all as specified and as directed conforming to Fe-290 Gde E-165.

S & F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as spescified all as specified and as directed.

S & F galvanised MS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 and fixed with tinned tacks galvanised wire stapples etc complete all as directed.

M & L applying two coats of synthetic enamel paint on wooden surfaces over a coat of pink primer incl preparation of new surfaces of any description, not otherwise, described, over 10cm width or girth complete all as spescified all as specified and as directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete complete all as spescified all as specified and as directed.

S&F Alluminium anodised barrel tower bolts 150mm of extruded section and fixed complete all as spescified all as specified and as directed.

S&F extruded aluminium alloy handles, fabricated type anodised 125mm size complete all as specified and directed.

S&F Butt hinges of 100 mm medium weight cold rolled mild steel and fixing complete all as spescified all as specified and as directed.

S&F Stainless steel but hinges of 100 mm long complete all as spescified all as specified and as directed.

Taking up & down steel tubing & connections, inc. cleaning for refixing or removal to store 15 mm dia complete all as spescified all as specified and as directed.

Taking up & down steel tubing & connections, inc. cleaning for refixing or removal to store 20 mm dia complete all as spescified all as specified and as directed.

S & F, 15mm dia. steel water tubing 'medium grade' galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors complete all as spescified all as specified and as directed.

Re fixing old steel tubing 20 mm dia & connections in new or old positions (walls,ceiling &floors) complete all as spescified all as specified and as directed.

S & F, 20mm dia. steel water tubing 'medium grade' galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors complete all as spescified all as specified and as directed.

S&F Gun metal gate valve with iron wheel head screwed both ends for iron pipe 20mm bore complete all as spescified all as specified and as directed.

S&F in repair bib tap 15 mm bore, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair stop valve 15 mm bore, fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair stop valve 15 mm bore (Concealed Type), fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F 600 mm long PVC connections, 15 mm dia with PTMT nuts, complete all as specified and as directed.

S & F in repairs, vitreous china squatting pan, 'orissa' pattern, size 580x440mm white, with integral foot rests & inc. cistern 10 litres capacity & flush pipe & inc. concrete bedding &. CI 'P' trap, 100mm Supply andcomplete all as specified.

S&F in repairs EWC Pedestal pattern WC ,white incl EWC Cover,10 ltr capacity PVC ,LLFC,32 mm dia PVC flush pipe & VC Toilet paper holder etc complete complete all as spescified all as specified and as directed.

S & F in repairs vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc. cutting for & pinning in ends of brackets, inc. waste fitting, PTMT 32mm dia and pillar taps of CP fancy type 15mm dia complete,fixed in repairs complete all as spescified all as specified and as directed.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe with grating and union for discharge pipe incl urinal spreader and waste pipe )but incl urinal spreader complete all as spescified all as specified and as directed.

S&F Hat & coat hooks solid aluminium body 175 mm to 250 mm complete all as spescified all as specified and as directed.

S & F 60 cm long brass chromium plated towel rail 20mm dia with two brackets fixed in repairs complete all as spescified all as specified and as directed.

S&F chromium plated shower roses of 125 mm size with or without swivel joints any size including fixing to steel pipe or union fixed in repair complete all as spescified all as specified and as directed.

Taking down PVC pipe any dia/type and setting aside for repair complete all as spescified all as specified and as directed.

S&F P V C (SWR) pipes of 110 mm bore single socketed in any length fixed to wall complete all as spescified all as specified and as directed.

S&F P V C (SWR) pipes of 75 mm bore single socketed in any length fixed to wall complete all as spescified all as specified and as directed.

Taking down PVC (SWR) fittings any type/dia viz bends, tee, branch piece etc complete all as spescified all as specified and as directed.

S&F 75mm PVC (SWR) floor trap plain with grating incl jointing with solvent cenment complete all as spescified all as specified and as directed.

S&F 110mm PVC (SWR) WC connector with lip ring complete all as spescified all as specified and as directed.

S&F PVC (SWR) bends any radius 75mm bore provided with access door complete all as spescified all as specified and as directed.

Ditto-all as per item no 67 above but 110MM bore complete all as spescified all as specified and as directed.

S&F 110mm bore PVC (SWR) vent cowl all as specified and as directed

S&F 75mm bore PVC SWR bends any radius all as specified and as directed

S&F PVC (SWR) junction single, (Single Y) equal or un equal 110 mm bore of any radius with Access door all as specified and as directed.

M&L Mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as spescified all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

M & L for Surface Conduit Point wiring with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for: (a) One light point controlled by one, one way switch 5A, SP

(b) One ceiling / exhaust fan point controlled by one, one way switch complete all as spescified all as specified and as directed.

(c) One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

S & F Switch piano type single pole one way flush type 5 Amps capacity 230 volts complete all as spescified all as specified and as directed.

Supply and fix socket outlet flush type multipurpose 2/3 pin 5 amps, 230 volts all as specified

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified.

S & F wall mounted box type LED of 18/22 watt of size 4 ft with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor multistranded three core of suitable length & size from fitting to the ceiling rose complete and as directed by Engr-in-Charge.

S & F wall mounted LED batten of 09 watt of size 2 ft with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified and directed by Engg-in-Charge.

Supply & fix Exhaust fan of metal body 300 mm sweep with metallic louver including connecting up of PVC insulated copper conductor multi stranded cable of suitable size as recommended by the manufacturer from ceiling rose to connector complete including provision of HDPE high grade plastic net 800 GSM,hole size one inch,thickness 3mm green colour on the outside wall all as specified and as directed. by Engr-in-charge.

M&L for cutting of wall in round shape using machine cutting only and making opening,at any height, fixing of suitable premoulded block of required suitable for mounting of 300 mm dia exhaust fan including making good the disturbed surfaces,plastering,matching with existing colour along with hole size matching with existing colour and clearing all debris and making the work area clean all as specified and directed.Note:The quoted rate includes foe all/any number of openings required at any place for proper ventilation of the site.

S and F sheet metal enclosure MCB DB SPN 4 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified.

S & F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and directed by Engg in Charge

S & F MCB SPN 230V suitable for fixing on MCB DB of capacity 40 Amps complete all as specified and directed by Engg in Charge

M & L for Submain wiring with two single core 6 Sq mm PVC insulated FR copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC concealed conduit and conduit accessories of 25 mm dia medium grade including running up of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

Supply and fixing porcelain insulator with necessary arrangements on the roof/wall for fixing copper strip all as specified and directed.

A & F Air termination single pointed, copper rod 12 mm dia and 300 mm long with necessary fixing arrangements on roof of bldg all as specified and directed.

Supply and fixing test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including hex. Head screw 3 Nos 8 mm dia 25 mm long complete all as spescified all as specified and as directed.

Supply and fix copper strip 32 x 6 mm thick as continuity earth lead from Air terminal point to test terminal point all as directed and specified.

Supply and fix copper strip 20 x 3.15 mm thick as continue earth lead from copper earth plate to test terminal point all as directed and specified.

Earthing complete with copper earth plate electrode 60cmx60cmx3.15mm thick electrode buried directly in ground earth pit not less than 2.25 m deep below normal ground level) with top edge of earth plate not less than 1.5 m below ground level connected to copper earth strip 20x3 mm by means of bolts, nuts, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 40 mm bore of medium grade from earth electrode to test point incl provn of concrete pit in PCC(1:2:4) type B-1 using 20 mm graded stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (Weight not less than 4 Kg/Sqm) PCC cover with handle and with 6 mm dia MS bar handle made to shape, GI pipe medium grade 20 mm bore pipe for watering perforated at bottom1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50 mtr, all as per Electricalplate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. (Note: Item of Earthing includes cost of 7.5 mtr long copper earth strip 20x3 mm size and protection pipe 40 mm bore GI medium grade.

Supply and Lay GI tubing medium grade 40 mm dia 1.5 RM length incl PCC 1:2:4 on roof with necessary fixing arrangements all as specified and directed.

M/S V PRATAP REDDY

BEEGEE DESIGN SYSTEMS

K LAKSHMAN SINGH AND CO