NIT NO. 13 ITEM NO. 24

S/O Cap type Level transducer with following specifications: - 1. Applications Tank level Measurement 2. Measuring Media Liquid & Flow: 3. Measuring accuracy +0.25% FSR of measuring range 4. Resolution Accuracy 0.1 mm 5. Power supply 12 – 30 VDC (0.1A surge) 6. Transmitter Type Loop Powered 7. Current output 4 – 20 mA constant Current 8. Temperature Range -20 to +100 deg C 9. Pressure Rating - 6 kg / cm2 10. Enclosure rating : Die cast aluminium duly approved flame proof ABS duly approved for 65 / 67 Make: - Spink / DPM / PSI / Siemens / DJB approved

Supply of Process Indicator / controller having 4 relay outputs, contact rating 230 VAC, 1 amp. The system should be Configurable as control outputs on separate set Points, with predefined logic with 7 segments LED, 5 digits. Supported by 4 key tack-tile keyboards. The system will have 4 relay outputs; contact rating 230 VAC, 1 amp., Input will be 4-20 mA Linear with resolution 4 ½ “ digit . The Supply will be 230 VAC 50Hz & Power Output of 24 VDC 120 mA. Power supply is made available for the external transmitter supply . Make: - Spink / DPM / PSI / Siemens / DJB approved

Supply of 3 Core X 0.5 sq mm , 10 meter power cable between ultrasonic level instrument & the power source. Make: Finolex / Deep cables/ Havelss / DJB approved

Supply of 2 Core X 0.5 sq mm Ag coated multi core multi insulated shielded reciprocating 50 mtrs. signal cable- between level instrument & the process controller Make : Spink / Deep cables or equivalent / DJB approved

Supply of Cover Box- MS body, oil painted of size suitable as per site requirement

Installation, testing and commissioning charges including dismantling the existing defected material from the site after disconnecting their connections etc. So as not to damage the civil structure Drilling the water tank of for insertion of capacitance sensor, fixing it securely with fasteners fixing the new controller at site as per requirement and making the wiring the signal and the power connection along with complete thimbling / taping etc. as per the site requirement, Complete servicing of the existing system, laying, checking and connecting the wiring connections, checking and tightening the lose and soft connection replacing anf defected nut bolt and insulators etc, as per site requirement, fixing the MS canopy. Programming of requisite software for energizing the sensor and controller testing and commissioning the entire system after completing the above work first at passive mode and then repeating the step in active mode.

APURV ENTERPRISES