Loading
Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹4.1 L
Closing Date
16 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
14 conditions · 2 needing a document upload
IRGCC 2022 TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.2 2.Financial Eligibility Criteria: (As Per IRGCC Clause 10.2) 10.2.Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. 10.3 Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI. PLEASE READ ALL IRGCC TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.2 TO EVALUATE THE FINANCIAL ELIGIBILITY CRITERIA Non submission of Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet by the tenderer shall result in summarily rejection of his / their bid" ( Click here to download Format)
IRGCC 2022 TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.1 1.Technical Eligibility Criteria: (As Per IRGCC Clause 10.1) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR 2Two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR 3One similar work costing not less than the amount equal to 60% of advertised value of the tender Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. PLEASE READ ALL IRGCC TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.1 TO EVALAUTE THE TECHNICAL ELIGIBILITY CRITERIA
Defination of Similar Work :- Any work of EI / PI / RRI / ABS/ IBH/ LC Gate interlocking work which include indoorand outdoor signalling work.
28 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The definition and calculation of local content shall be inaccordance with the Make in India policy as incorporated in thetender conditions. Please refer to Make in India Policy attachedherewith for detailed information.
Complete tender document including NIT details, schedule, conditions is attached herewith. Tenderers are requested to read the tender document thoroughly before quoting their rates.
Tender will be governed as per latest standard Indian Railways General Conditions of Contract, works 2022 and their all correction slips. Tenderer are requested to read the latest IR GCC works 2022 and their all correction slips before submission of their offer and must be submit the all Annexures, documentary evidences, data as mentioned in IRGCC Works 2022 and their all correction slips.
All the documents in support of the Minimum Eligibility Criteria including Letter of Acceptance/Work Order, Documents showing the nature and total value of work, Completion report, Audited balance sheet, Attested certificate from Government employer, Copy of I.T. return etc. should be submitted along with the bid. Railway reserves the right to make or not to make any further reference to the tenderer regarding the fulfillment of the Minimum Eligibility Criteria and to award the tender only on the basis of the documents submitted by the tenderer along with the bid. The tenderer will not have any claim on this account.
Rights of the Railway to deal with Tender: The authority for the acceptance of the tender will rest with the Railway. It shall not be obligatory on the said authority to accept the lowest tender or any other tender, and tenderer(s) shall neither demand any explanation for the cause of rejection of his/ their tender nor the Railway to assign reasons for declining to consider or reject any particular tender or tenders. If the tenderer(s) deliberately gives / give wrong information in his / their tender or creates / create circumstances for the acceptance of his / their tender, the Railway reserves the right to reject such tender at any stage.
If the bidder submits Bid security in the form of Bank Guarantee "The original Bank Guarantee should be delivered in person receive and dispatch section of this office (i.e. DRM office, Signal & Telecom, Branch, West Central Railway, Jabalpur) before closing date for submission of bids (i.e. excluding the last date of submission of bids)
1.As per Railway Boards letter no. 94/CE-I/4 Pt.17 dated: 13.08.2012, for all work contract valuing more than Rs.10 Crore, "two Packet System" of tendering mandatorily be followed. 2.As per Railway Boards letter no. 2002/CE-I/CT/37 JV Pt.VIII dated: 14.12.2012, "JOINT VENTURE FIRMS" shall now be applicable to the works tenders of value More than Rs. 10 Crores. 3.This is highly technical work to be executed only by qualifying MEC stipulated in tender document as per IR GCC 2022 with similar work issued vide CSTE office letter no. WCR/N- HQ/150/Wks/Policy/14 dated: 03.08.2018. No any relaxation in MEC will be given for any consideration. Firm failing to satisfy the MEC will be treated as ineligible firm. (IF MEC APPLICABLE) 4.In terms of railway board's letter no. 2020/CE- I/CT/3E/GCC/Policy dated: 30.12.2020, If the bidder is banned for submission of bids on the date of closing of tender, such bid, even if received, shall be treated as invalid while evaluating the bids. 5.Change of inspection authority may be done by engineer- incharge at a later date. 6.In case of more than one valid & eligible L-1 bidders, tender may be awarded to tenderer having higher bid capacity. In case bid capacity is also the same, tenderer having done more value of similar work in last three previous financial years and current financial years up to the date of the opening of the tender, may be selected for the award. Instructions with respect to bid capacity will follow. Supporting document for this may be clearly uploaded by tenderer with their offer. 7.The provisions contained in railways circulars, JPO's regarding penalties will be applicable for works requiring digging. 8.As per railway boards letter no. 2017/CE- I/CT/9 dated: 31.05.2023 "for all contracts costing more than Rs.5 crore, Contractor's e-MB is mandatory and contractor's e- MB should be part of Tender Document. All other provisions of railway boards letter no. 2017/CE-I/CT/9 dated: 31.05.2023 will be followed. (If applicable)
West Central Railway Joint procedure order for undertaking earth work in the vicinity of electrical, signalling, telecom cables issued vide no. WCR/N-HQ/110/JPO Corrsp/Sig.-99 dated: 08.01.2024 instructed vide GM (S&T) JBP letter no. JBP/N.H.Q.120/Policy/T-1/Part-V dated: 10.01.2024 and procedure for undertaking digging work in the vicinity of signalling, electrical and telecommunication cables issued by railway board vid eno.2021/Tele/5(2)/3-Part(1)(3425647) dated 12.06.2023 or any other latest JPO by railways will be applicable in this contract
It is responsibility of the contractor during execution the work near the track, that all safety precautions will be taken like; Safety Jacket, wearing of Safety Shoes and Helmet to avoid any type of causality.
SPECIAL CONDITIONS AND SCOPE OF WORK OF THIS WORK WILLBE AS PER CONDITIONS MENTIONED IN TENDER DOCUMENT ATTACHED HEREWITH
RATES: The rates (if accepted) quoted by the bidder will be inclusive of all taxes & duties, GST livable by state/central government/local government. Compliance of GST Act/Rule and any Correction /Modification issued by Railway Board/Government in Regard to GST act shall be binding to the contractor.
COMPLIANCE OF LABOUR LAWS & REGISTRATION: Contractor should comply with the latest applicable labour laws. You will be advised to contact Regional Labor Commissioner, Jabalpur for necessary action. Contractor is to abide by the provisions of Payment of Wages ACT & Minimum Wages ACT and all other Labour provisions as per IRGCC Works and all its Advance correction slips
SHRAMIK KALYAN. : You will be advised to register yourself on Railway Board website www.shramikkalyan.indianrailways.gov.in & upload the required information regarding the awarded tenders to bidders by this office.
ENGINEER INCHARGE: Sr. Divisional Signal & Telecom Engineer/Co. /JBP will be the Engineer in-charge of the work
FINANCE OFFICER: Sr. Divisional Finance Manager / Jabalpur will be the Associate Finance Officer
CONSIGNEE: Consignee depot as mentioned in tender documents attached herewith or as nominated by Engineer In- charge will be Consignee depot for supply materials. Sectional SSE In-charge of the respective station or as nominated by engineer in charge will be site supervisor for the execution of the work. Measurement of execution of work will be certified by sectional SSE/SIG duly endorsed by respective ADSTE's and measurement will be recorded in MB by Consignee depot as mentioned in tender documents attached herewith. Sectional ADSTE will be Field Engineer for the execution work of respective section.
TEST CHECK: 20% check shall be certified by the officer as mentioned in tender documents in Measurement Book.
SUBSTITUTE: The Engineer-in-charge of the work may substitute these officers/supervisors at a later date as per Railway requirement.
If any document/information submitted by you found false/incorrect/forged in any manner then action will be taken as per codal provisions of railways.
IRGCC works 2022, Part-I, clause 7 i.e. 7. "Right of Railway to Deal with Tenders: The Railway reserves the right of not to invite tenders for any of Railway work or works or to invite open or limited tenders and when tenders are called to accept a tender in whole or in part or reject any tender or all tenders without assigning reasons for any such action. In case if tender is accepted in part by Railway administration, Letter of Acceptance shall be issued as counter offer to the Tenderer, which shall be subject to acceptance by the Tenderer. However, performance guarantee, security deposit and other financial transactions in the tender will be as per total contract value evaluated by e- tender module of IREPS and no any relaxation on performance guarantee, security deposit and other financial transactions will be given on account of banning of any/some items for procurement in this tender.
S&T work in connections with construction of new goods shed for provision of one loading line at Bagratawa station of Jabalpur division on West Central Railway (Signalling work).
JBP-N-SIG-TENDER-2026-19~WCR
JBP-N-SIG-TENDER-2026-19
Open
Works - General
18 Months
Jabalpur, Madhya Pradesh
₹0
₹4.1 L
25 Aug 2026
25 Aug 2026
2 Sept 2026
293 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,41,04,988.12 | ||
| — | 50.00 | — | — | ||
| Supply of QNA1 (AC immunised relay), 8F-8B, 24VDC along with plug board (Base plate), retaining clips and connectors conforming to BRS:931A, IRS:S34 & IRS:S23. INSPECTION BY RDSO. | — | — | — | 2,32,389.5 | |
| — | 1.00 | — | — | ||
| Supply of flexible cable single core multistrend copper conductors, 1x2.5 sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY CONSIGNEE. | — | — | — | 22,272.93 | |
| — | 20.00 | — | — | ||
| Supply of Earth Electrode assembly as per Drg.No. S&T/CON/KOTA/Earthing/01 INSPECTION BY CONSIGNEE. | — | — | — | 24,770.2 | |
| — | 5.00 | — | — | ||
| Supply of Apparatus Case with miniature 'E' type locks with keys (1 key per 5 location boxes) of ward Nos. 41 (E type lock & key as per spec. Nos IRS S 30 & Drg. Nos. WCR/DY.CSTE(Con)/KOTA/3 respectively with latest Amendment) on both the doors, duly painted with red oxide. Single case as per Drg Nos WS- 8842/A with latest alteration. INSPECTION BY CONSIGNEE. | — | — | — | 66,623.35 | |
| — | 5.00 | — | — | ||
| Supply of Apparatus Case with miniature 'E' type locks with keys (1 key per 5 location boxes) of ward Nos. 41 (E type lock & key as per spec. Nos IRS S 30 & Drg. Nos. WCR/DY.CSTE(Con)/KOTA/3 respectively with latest Amendment) on both the doors, duly painted with red oxide. Half case as per Drg Nos WS- 8842/A with latest alteration. INSPECTION BY CONSIGNEE. | — | — | — | 60,865.25 | |
| — | 10.00 | — | — | ||
| Supply of Phenolic Laminated sheet, resin bonded 10mm thick, grade P3 in standard size of 1.22 x 1.22 Mtr as per spec. No IS 2036 of 1974 . INSPECTION BY CONSIGNEE. | — | — | — | 40,928.8 | |
| — | 3000.00 | — | — | ||
| Supply of two in two out (4 conductor) Knife edge disconnect terminal block set as per Spec RDSO/SPN/189/2004 ver 3.0 with latest amendment. INSPECTION BY CONSIGNEE | — | — | — | 2,51,100 | |
| — | 300.00 | — | — | ||
| Supply of end plate suitable for disconnect terminal. INSPECTION BY CONSIGNEE. | — | — | — | 3,750 | |
| — | 100.00 | — | — | ||
| Supply of steel carrier Din rail suitable for fixing disconnect terminal 1 meter long of dimension 35mm X 7.5 mm, 1mm thickness, unslotted. INSPECTION BY CONSIGNEE | — | — | — | 14,831 | |
| — | 600.00 | — | — | ||
| Supply of end stop suitable for disconnect terminal block INSPECTION BY CONSIGNEE | — | — | — | 6,564 | |
| — | 100.00 | — | — | ||
| Supply of cartridge fuse block made of PBT as per RDSO Drg. Nos. SA - 23748 Alt. 4 and Spec. Nos. IRS-S-75/2006 with latest amendment. Fuse block shall be suitable for round head type fuses. INSPECTION BY RDSO. | — | — | — | 18,660 | |
| — | 100.00 | — | — | ||
| Supply of non detoriating type low voltage cartridge fuse current 2Amp/4Amp in equal proportion round head type a s p e r spec No IRS/S/78/92 with latest amendment. INSPECTION BY RDSO. | — | — | — | 8,078 | |
| — | 120.00 | — | — | ||
| Supply of GI pipe as per Specn. No. IS 1239 (Part-1)/1990 medium class normal bore of 100 mm, nominal mass of Tube 12.5 Kg (+/-) 10% per meter and complying parameters of specification. INSPECTION BY CONSIGNEE. | — | — | — | 1,44,442.8 | |
| — | 1.00 | — | — | ||
| Supply of Main Signal Post 140 mm outer dia 4.5 Mtr Length as per spec Nos IRS S 6/81 with latest amendments. INSPECTION BY CONSIGNEE. | — | — | — | 7,504.84 | |
| — | 5.00 | — | — | ||
| Supply of Shunt Signal Post with Base (GI Pipe of 80 mm Dia. Medium class 49 IS Specification IS:1239 Pt-1/1990). INSPECTION BY CONSIGNEE | — | — | — | 11,091.2 | |
| — | 1.00 | — | — | ||
| Supply of Cast Iron Main signal surface base 140mm as per spec Nos IRS S 10 and Drg Nos 2011/M with latest amendments, with CLS Ladder assembly complete for CLS signal 5.5 50 Mtrs long as per RDSO Drg. Nos. SA- 23156. & signal front staging complete assembly. INSPECTION BY CONSIGNEE | — | — | — | 9,742.45 | |
| — | 5.00 | — | — | ||
| Supply of Signal Nos. plates. as per Drg enclosed. INSPECTION BY CONSIGNEE | — | — | — | 2,404.25 | |
| — | 1.00 | — | — | ||
| Non Metallic (FRP) colour light signal housing multi unit type for railway signalling suitable for RE area TWO Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23001/A/M Adv. Alt- S and as per SPEC. No. RDSO/SPN/194/2006 (Ver. 1.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest INSPECTION BY CONSIGNEE | — | — | — | 26,983.06 | |
| — | 1.00 | — | — | ||
| Supply of Offset bracket 5 1/2" suitable for 140mm outer dia of main signal. INSPECTION BY CONSIGNEE | — | — | — | 972.79 | |
| — | 3.00 | — | — | ||
| Supply of Offset Bracket 3-1/2" for shunt signal. INSPECTION BY CONSIGNEE | — | — | — | 1,467.93 | |
| — | 3.00 | — | — | ||
| Supply of position light shunt signal Unit. as per RDSO Nos. SA23840. INSPECTION BY CONSIGNEE. | — | — | — | 23,232.69 | |
| — | 1.00 | — | — | ||
| Supply of flexible cable single core multistrand copper conductors, 1x6 sq.mm confirming with latest amendments. INSPECTION BY CONSIGNEE | — | — | — | 83,304.13 | |
| — | 5.00 | — | — | ||
| Supply of Track Relay QTA2 (AC immunised relay), 9 Ohm, 2F/1B, along with plug board (Base plate), retaining clips and connectors conforming to BRS:939A, IRS:S34 & IRS:S23. INSPECTION BY RDSO | — | — | — | 30,783.85 | |
| — | 10.00 | — | — | ||
| Supply of Relay, AC immune, plug-in-type, Style QBAT DC biased track, 9ohms, 2F-2B contacts, complete front and back contacts metal to carbon complete with plug board, retaining clip& connectors conforming to RDSO/SPN/84-88,IRS S 34 & IRS S23 Interlocking pin code ABEJX. INSPECTION BY RDSO | — | — | — | 56,892.8 | |
| — | 20.00 | — | — | ||
| Supply of QSPA1, 24VDC, Slow to pick up 8F/4B, along with plug board (Base plate) retaining clip and connectors confirming to BRS: 933A, IRS:S60 & IRS: S34. INSPECTION BY RDSO | — | — | — | 1,14,776 | |
| — | 10.00 | — | — | ||
| Supply of Track feed battery chargers of 10A rating to Specn. Nos.IRS:89/2025 Ver 2.0. with latest amendment. Charger shall be suitable for charging 80 AH battery. INSPECTION BY RDSO | — | — | — | 28,390.7 | |
| — | 10.00 | — | — | ||
| Supply of track lead junction boxes as per Drg. Nos. RST11509 made from fibre glass along with terminal blocks. The TLJB should be BLACK in colour. INSPECTION BY CONSIGNEE | — | — | — | 12,934.7 | |
| — | 10.00 | — | — | ||
| Supply of B type choke to specn.Nos.IRS.S.65/83 with latest amendments. INSPECTION BY RDSO | — | — | — | 44,900.1 | |
| — | 10.00 | — | — | ||
| Supply of adjustable Track Feed Resistance, 30 ohms as per RDSO Drg. Nos. SA- 20161-66M/M with latest amendments (with Phenolic moulded base). INSPECTION BY RDSO | — | — | — | 15,886.6 | |
| — | 1000.00 | — | — | ||
| Supply of PVC jacketed wire rope for Track Lead connections. PVC jacketed wire rope should be of Galvanised steel wire rope 6 mm dia (6x19 stranded wire with steel core of 6 mm dia) sheathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1970. Reclaimed or recycled material should Nst be used. INSPECTION BY CONSIGNEE | — | — | — | 56,370 | |
| — | 30.00 | — | — | ||
| Supply of low maintenance Lead Acid Secondary Cells 2V/ 80 Amp Hr. as per spec. IRS IRS:S 88-2004 with latest amendments. INSPECTION BY RDSO | — | — | — | 61,774.8 | |
| — | 10.00 | — | — | ||
| Supply of "S" shape GI bend pipe Medium class, 50 mm dia. and of 1 mtr length, for cable entry in point machines as per Dy CSTE/C/BPL/011. INSPECTION BY CONSIGNEE | — | — | — | 2,572.2 | |
| — | 10.00 | — | — | ||
| Supply of Electric Point Machine (Rotary locking Type) , 110VDC operation (AC immunity 160V) as per RDSO drg. S-11000 with ground connection and clamp lock arrangement suitable or 220mm throw for thick web switches as per IRS:S 24-2025 Rev.3 or latest. INSPECTION BY RDSO | — | — | — | 10,31,580.7 | |
| — | 20.00 | — | — | ||
| Component for Clamp type Ground connection for IRS point machines 220 mm stroke as per annexure attached. Clamp type Ground INSPECTION BY RITES / TPI | — | — | — | 6,09,470.4 | |
| — | 500.00 | — | — | ||
| Supply of William stretcher nylon insulation set suitable for ground connections per RDSO drg Nos T-10367, T-10368, T-10384 as applicable and to the spec IRS S 23 & 40/84 with latest amendment. INSPECTION BY CONSIGNEE | — | — | — | 2,93,550 | |
| — | 10.00 | — | — | ||
| Supply of Heat shrinkable straight through joint for UG cables with all accessories as per RDSO spec. no."IRS /TC/77/2012 (rev-3) with amend.-1 &2 or latest for 6 quad cable 0.9mm dia (TSF-2)joint suitable for 6 quad cable. INSPECTION BY RDSO. | — | — | — | 19,174.3 | |
| — | 20.00 | — | — | ||
| Supply of Tag Blocks 200 way with cover as per IRS: S- 77/2006 (Rev. 1) with latest amendment. INSPECTION BY RDSO. | — | — | — | 33,423.2 | |
| — | 5.00 | — | — | ||
| Supply of Key Lock Relay AC immunized with different ward combinations (Five set of same ward plate for Point Machine to be supplied with each relay) of Siemens Make working on 60V DC or functional equivalent. Spec RDSO/SPN/219/2016 ver 1.0 Amdt. 1 INSPECTION BY RDSO. | — | — | — | 42,777.3 | |
| — | 50.00 | — | — | ||
| Supply of relay universal LED ECR, QECX 61 4F/4B INSPECTION BY RDSO | — | — | — | 3,16,449 | |
| — | 5.00 | — | — | ||
| Supply of PVC insulated flexible wire 16/0.2 mm dia with latest amendments of various colours. (Red, black & grey) with OEM guaranty/ warranty certificate. INSPECTION BY CONSIGNEE. | — | — | — | 32,547.5 | |
| — | 200.00 | — | — | ||
| Supply of ARA Terminal Block made of PBT as per Drg No SA 23741 alt 3 & spec. No IRS S 75/91 with latest amendments with disconnecting links as per Drg no. RST/11336. INSPECTION BY RDSO | — | — | — | 18,040 | |
| — | 50.00 | — | — | ||
| Supply of Desk type Electronic Magneto Telephone as per spec No IRS TC79/2000 or with latest Amendments. INSPECTION BY CONSIGNEE. | — | — | — | 1,62,442 | |
| — | 30.00 | — | — | ||
| Supply of Relay Plug In type, two DC neutral line, mechanically interlocked, in mini group housing, complete with base plate each 60V,4F/4B contacts, front and back contacts metal to metal conforming to IRS: S 46 and firms specification. Siemens make (RSSK 30/0012)ABB or functional equivalent As per site requirement. INSPECTION BY RDSO | — | — | — | 3,52,806.9 | |
| — | 1.00 | — | — | ||
| Supply of Pre-wired Crank Handle cum key lock relay box along with LEDs, TEKNIC/SIEMENS make push buttons, 8-way terminal strips/wago terminal, string rod, etc.as per Drawing Nos.RST.C.111A INSPECTION BY CONSIGNEE. | — | — | — | 11,471.99 | |
| — | 5.00 | — | — | ||
| Tool Kit for maintenance of SSDAC/HASSDAC system suitable for CEL or GG Tronics as per RDSO specification No. RDSO/SPN/177/2012 (Ver.3) consisting of items as per attached list. As per site requirement. . INSPECTION BY RITES/TPI. | — | — | — | 6,78,500 | |
| — | 20.00 | — | — | ||
| Supply of Concrete Cable Route Marker as per drawing SDO/Cable Laying/020. INSPECTION BY CONSIGNEE. | — | — | — | 6,460.8 | |
| — | 2.00 | — | — | ||
| Supply of Jumper wire 1X1mm dia as per RDSO spec, IRS:S-76/89 with latest amendments of various colours. . INSPECTION BY CONSIGNEE. | — | — | — | 17,615.26 | |
| — | 100.00 | — | — | ||
| Supply of Chlorinated rubber Paint as per IS 13467 : 1992 suitable for applying on insulated rail joint. Colour:- Grey. Packing-In 20 litter Drum/cane. . INSPECTION BY CONSIGNEE. | — | — | — | 14,982 | |
| — | 5.00 | — | — | ||
| Supply of PVC insulated railway signalling indoor single core [ tinned jumper wire] 1 x 0.6mm dia, different colours, blue: 60%, red:15%, gray: 20% and brown: 5%. with OEM guaranty/ warranty certificate . INSPECTION BY RDSO. | — | — | — | 20,490.15 | |
| — | 4.00 | — | — | ||
| Supply of Earth Leakage detector 8 channel card (2 channel card for monitoring AC and 6 channel card for monitoring DC voltages) as per RDSO Spec No RDSO/SPN/256/2025 Version: 2.0 with latest amendment. INSPECTION BY RDSO. | — | — | — | 4,36,782.16 | |
| — | 100.00 | — | — | ||
| Supply of INDICATIVE TYPE OF FUSE INSERTS. With holder 1.6 A (System, Rapid or Malnad Make or similar). INSPECTION BY RDSO. | — | — | — | 8,110 | |
| — | 100.00 | — | — | ||
| Supply of INDICATIVE TYPE OF FUSE INSERTS. With holder 0.6A(System, Rapid or Malnad Make). INSPECTION BY RDSO. | — | — | — | 7,772 | |
| — | 50.00 | — | — | ||
| Supply of Relay Non-AC Immune, plug-in-type, DC Neutral Line 60V4F/4B, 5F/3B, 6F/2B contacts, front and back contacts metal to metal, conforming to IRS: S 46 and firm's specification. The relay housing shall contain two iniature identical relays in mini group housing complete with base plate, INSPECTION BY RDSO. | — | — | — | 4,65,159 | |
| — | 100.00 | — | — | ||
| Supply of Relay Plug In type two DC neutral line in mini group housing, complete with base plate consisting of Top relay AC immunized & Bottom relay both AC immunized, each 60V, 5F/3B, contacts, front and back contacts metal to metal conforming to IRS: S46 and firms specification. Siemens make (RSSK 30/0078-1), ABB or functional equivalent As per site requirement. INSPECTION BY RDSO. | — | — | — | 11,70,152 | |
| — | 5.00 | — | — | ||
| Supply of Signal Group 2 Aspect (Ref: IRS: S46 & firm's specification), of Siemens Make (Nos A-RT-RG-A066) or functional equivalent without base plate (Suitable for LED signals) As per site requirement. INSPECTION BY RDSO. | — | — | — | 2,58,614.35 | |
| — | 5.00 | — | — | ||
| Supply of Route Group (Ref. IRS:S46 firms specification), of Siemens Make (Nos RSSK 31/0002) or functional equivalent without baseplate. INSPECTION BY RDSO.. | — | — | — | 2,74,432.3 | |
| — | 10.00 | — | — | ||
| Supply of DRS Point Group for PI, (Ref. IRS: S46 firm's specification), of Siemens Make (Nos RSSK 3515/19) or functional equivalent without base plate As per site requirement. INSPECTION BY RDSO. | — | — | — | 5,37,833.3 | |
| — | 5.00 | — | — | ||
| Supply of Shunt signal Group (Ref:IRS:S-46). SIEMENS Make (No.RSSK 3526/67) or Equivalent with base Plate & suitable for LED shunt Signal.(Suitable for existing Installation ) INSPECTION BY RDSO. | — | — | — | 3,36,070.55 | |
| — | 30.00 | — | — | ||
| Supply of Domino units with cover plates as per approved panel diagram, each of size 54 x 34mm completely wired up similar to Siemens make. Each domino unit should have all the 15 contact terminals wired up. INSPECTION BY CONSIGNEE. | — | — | — | 27,781.5 | |
| — | 1.00 | — | — | ||
| Supply of flexible cable single core multi strand copper conductors, 1x10sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY CONSIGNEE WITH OEM GUARANTY / WARRANTY CERTIFICATE INSPECTION BY CONSIGNEE. | — | — | — | 1,23,802.79 | |
| — | 1.00 | — | — | ||
| Supply of flexible cable single core multi strand copper conductors,1x16sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY CONSIGNEE WITH OEM GUARANTY / WARRANTY CERTIFICATE INSPECTION BY CONSIGNEE. | — | — | — | 1,83,089.98 | |
| — | 1.00 | — | — | ||
| Supply of permanently lubricated HDPE Telecom Duct, 40/33 mm, as per TEC GR/CDS/08-02 NOV-04 , along with accessories as below: (to be procured from RCIL approved sources). INSPECTION BY CONSIGNEE. | — | — | — | 53,645.12 | |
| — | 10.00 | — | — | ||
| Supply of End Plug INSPECTION BY CONSIGNEE. | — | — | — | 397.8 | |
| — | 10.00 | — | — | ||
| Supply of Cable Sealing Plug. INSPECTION BY CONSIGNEE. | — | — | — | 538.6 | |
| — | 10.00 | — | — | ||
| Supply of Plastic Coupler. INSPECTION BY CONSIGNEE. | — | — | — | 538.6 | |
| — | 2.00 | — | — | ||
| Supply of PVC indoor cable 1x24x1 mm dia having colour coding of insulation of inner core shall be six colours viz. Blue, Red, Grey, Green, Brown & Black and shall be confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY RDSO. | — | — | — | 4,69,603.54 | |
| — | 5.00 | — | — | ||
| Supply of Aluminium Double Sided A Shape Platform step ladder, Capacity 180 kilogram, 12 Feet long confirming to (IS-733-1975) or latest of reputed make/brand: S.J.LADDERS Model SJ 15 or similar. INSPECTION BY CONSIGNEE | — | — | — | 67,500 | |
| — | 5.00 | — | — | ||
| Supply of SPT phone for IBS. (which shall be installed on IBS post) along with one no. of slave unit being installed in SM'S office (both master and slave unit must work on 24V DC and must be suitable for 25 KV AC RE area). as per instructions of site incharge , ACES make or similar . Note : The contractor shall ensure that there is no interference in communication between the master and slave units owing to power hump due to RE induction. Cable from IB signal unit to the cable termination board in SM's room/relay room will be provided by the Railways. It shall work on OFC or quad cable & it shall ensured by contractor before supply of the item. INSPECTION BY CONSIGNEE. | — | — | — | 71,749.85 | |
| — | 8.00 | — | — | ||
| Supply of Digital insulation and continuity tester as per technical specifications attached at Annexure A. Meco DIT 918/Metravi 913D/UNI-T UT 501A or equivalent or better INSPECTION BY CONSIGNEE | — | — | — | 70,092 | |
| — | 100.00 | — | — | ||
| Supply of Twin Neutral Line Relay QNNA1, 24V DC, 4F-4B/6F-2B contacts, complete with plug board, retaining clip and connectors. Conforming to BRS: 930A, IRS:S60,, IRS:S34& IRS:S23. (No of each configuration will be decided by Engineer In-charge. INSPECTION BY RDSO. | — | — | — | 8,04,579 | |
| — | 10.00 | — | — | ||
| Supply of Time Element Relay (Clock work type) AG timer Siemens Make No. (RSSK 30/0052) or equivalent with timer range up to 120 seconds. INSPECTION BY RDSO. | — | — | — | 83,698.5 | |
| — | 10.00 | — | — | ||
| Supply of Signal Group 3 Aspect (Ref: IRS: S46 & firm's specification), of Siemens Make (Nos A-RT-RG-A067) or functional equivalent without base plate (Suitable for LED signals). INSPECTION BY RDSO. | — | — | — | 6,17,292.7 | |
| — | 10.00 | — | — | ||
| Supply of Double rail contact (TX coil) with 15 mtr length for multi section Digital axle counter. INSPECTION BY RDSO. | — | — | — | 8,87,995.3 | |
| — | 10.00 | — | — | ||
| Supply of Double rail contact (RX coil) with 15 mtr length for multi section Digital axle counter. INSPECTION BY RDSO. | — | — | — | 8,87,995.3 | |
| Supply and installation of OFC integrated hybrid access device 19" rack mountable for various telecommunication applications & Signalling to support eight slots for 64Kbps time slots / E1 / Ethernet as required , four optical uplinks 4 x 1Gbps , 8 E1 ports, 8 Ethernet ports with 1 additional SFP port, unit to support cross connect for mapping on optical or E1 as desired of FXO - FXS- RS232-E&M & relays of 24VDC , to support multi path on all four optical paths and E1 , capable to map E1 on to optical fibre port , 8 Port built in Switch to support POE or NON POE option , Ethernet to support L2 features like VLAN, Unit to support dual power supply , other features like potential free contact / management of the device / RS232 ports to be provided , the unit to consists of 8FXS port , 8 FXO port or one combined module of 4FXO and 4FXS and another module of 4 port E&M , 2IN 2OUT relay module to in terrace with 24VDC relays which can be carried on optical fibre one number ; with 8 E1 ports and 8Ethernet ports and four optical ports each 1Gbps support with SFP's included two number will be on dual core and two number will be on single core , input power supply support 24VDC / 48 VDC / 230 VAC, AC vide adaptor Model FABIO / Tansy lite / Mogra / Nokia. INSPECTION BY RITES / TPI. | — | 6.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
1GCCWORKS2022ACS1TO12_1.pdf
ATTACHMENT
3JPO10-1-2412-6-23.pdf
ATTACHMENT
4Letterforshramikkalyanportal_1.pdf SHRAMIK KALYAN LETTER
ATTACHMENT
MAKEININDIAPOLICY.pdf
ATTACHMENT
eBGletterdated16.06.2026.pdf
ATTACHMENT
TD-19-BGTA.pdf
ATTACHMENT
4Letterforshramikkalyanportal_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].