ALHW/DCE(A)/EE (NS)/Tend-23/2025-26

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead including cost of all labour charges, minor tools, LWC & GST etc., complete. :Thickness above 10 mm up to 25 mm.

Providing and fixing wall paneling 12 mm thick superior quality chemicals pressure treated edge glued finger jointed rubber wood boarding tongued grooved fixed over rubber wood frame work with rubber wood runner of size 50 mm x 15 mm fixed at 600 mm CC by secret nailing with brass screws duly fixed to wall including provision of designed rub wood beading and top and bottom termination of wood boarding and finished with two coats of melamine polish over a coat of honey/ natural colour wood filled putty etc, including cost of preparation and applying san paper and finishing to a glossy/ mat finish, rubber wood, all labour charges, transportation of materials, minor tools, GST, LWC, etc, complete.

Melamine polishing on wood work, make surface with grinding machine till the wood with natural colour and smoothening the surface with sand paper of different sizes, applying one coat filler and rubbing with water paper, after drying filler for 6 to 8 hours applying two coats sealer and rubbing with water paper, applying two coat of Melamine /Glossy finish all labour charges, minor tools, GST & LWC etc complete.

Providing and fixing 6 mm thick Occanic sheet ceiling of Everest or equalent make of size 610mmx 610 mm with necessary nails etc, in the aluminium framed ceiling ( frame work to be paid separately ) including cost of occanic sheet all labour charges, transportation charges, minor tools, scaffolding charges, GST, LWC, etc, complete.

Providing and fixing anodised aliminium work (with minimum 15 microns uniform anodic coating) consisting to tee/ angle section, of approved make conforming to IS:733 in frames of false ceiling inlcuding aluminium perimetre angles fixed to wall with rawl plugs @ 450mm center to center and fixing the frame work to level adjusting angles (6 mm dia M.S. rods) with necessary cadminum plated machine screws all complete as per approved architectural drawings and direction of the EIC, (level adjusting angles, ceiling cleats and expansion hold fastner to be paid for seperately) including cost of all materials, tarnsportation charges, minor tools, GST , LWC, etc, complete.

Providing and fixing wood work superior hard wood (Cat-II) in frames, fixed in position, including cost of timber, transportation charges of all materials to work site, all labour charges, minor tools, GST & LWC etc complete.

Providing and fixing pannaled or panneled and glazed shutters for doors, windows and clestory windows including black enammeled Aluminium Butt Hinge 10 Cm with necessary screws excluding pannelling which will be paid for separately, including cost of timber,transportation charges to worksite, all labour charges, minor tools, GST, LWC, etc, complete. 40mm Thick SHW

Providing fixing pannelling with hard wood planks for shutter doors, windows and clestory windows (Area of opening for pannel inserts excluding portions inside grovees or rebates to be measured) including cost of timber, transportation charges to work site, all labour charges, minor tools, GST, LWC etc, complete. Pannelled or pannelled and glazed shutters 25 mm to 40 mmthick.

Providing wooden laminated flooring consisting of individual pieces of 1286 x 8 mm all joined together and laid on the good quality 18 mm WPC/PVC board over timber framed structure with a plastic sheet 2.50 mm PVC foam sheet including matching skirting all round the profile as required and as per the direction of the EIC, including cost of all materials, labour charges, transportation charges, minor tools and plants , GST & LWC etc complete.

Removing and refixing the same Sport Flex vinyl flooring, including careful removal without damage, cleaning, re-fixing with approved adhesive, trimming of edges, and making joints good as required, complete in all respects as per direction of Engineer-in-Charge, inlcuding all labour charges, cost of minor tools, , GST & LWC etc complete.

Providing and fixing 18 mm thick WPC board on existing wall/partition frames, including supply of WPC boards (factory finished), fixing with SS/self-tapping screws and neoprene/metal washers, joint sealing/primer, cleaning and making good, complete as per directions of Engineer-in-Charge, all labour charges, cost of minor tools, transportation charges,, GST & LWC etc complete.

Earth work Excavation in foundation trenches in saturated soil for column and plinth etc, in all type of soil with a lead up to 100 mtr and lift up to 1.5 mtr including stacking the excavted earth not more than 3 mtr from the edge of excavation and then returning the stacked soil in 15 cm layers when required in plinths and sides of the foundation, etc, including cost of all labour charges, minor tools, GST,LWC etc, complete.

Providing and laying cement concrete 1:3:6 (one cement, three Pulversied sand and six stone metal of 40mm size of local quarry) for below footing, plinth beam, etc as directed by the EIC, including cost of nominal centering & shuttering charges, cost of cement,pulverised sand, stone metal, screening & washing of both the aggregate, mixing, placing, curing, GST,LWC,etc,complete.

Providing and fixig 20 cm thick masonry with hollow block size 0.40x0.20x0.20cm cast with cement concrete 1:3:6 (1 cement, 3 pulverised sand and 6 11.12mm local quarry stone chips) curing with 1:4 in walls, including cost of pulverised sand, all labour charges for casting, curing, walling, hire charges of hollow block casting machine, cost of timber pallets, including cost of cement transportation charges of all materials to worksite, all labour charges minor tools, LWC, GST, etc complete.

Providing and laying 12mm cement plaster of mix 1:4 (1 cement, 4 mainland river sand) including cost of cement, river sand, all labour charges, cost of minor tools, transportation charges, scaffolding charges, GST, LWC etc, complete.

Providing and laying RCC 1:1.5:3 with 20mm size stone chips (one cement, one and half mainland river sand & three stone chips of size 2 cm graded) in all RCC works as directed by the EIC, including cost of cement, stone chips and mainland river sand, screening and washing of both the aggregates, mixing concrete, conveying the concrete, placing in position, consolidation with vibrator, curing, all labour charges, transportation charges of all materials to work site, cost of minor tools, hire charges of mixer machine and vibrator, GST, LWC etc,complete.

Providing and fixing Tor steel reinforcement for RCC work including cutting, bending, bindingand placing in position cost of binding wire, minor tools etc, complete. The rate is inclusive of consumable items and GST & LWC etc complete.

Providing and laying and fixing 110mm dia PVC pipe 6kg/cm2 from w.c. to inspection chamber including fittings of PVC pipes, bends, tees, HCI cowls vent pipe etc whenever required as per the direction of EIC, cost of all labour charges transportation charges, minor toolsand GST & LWC etc complete.

Providing andlaying in position cement concrete of specified grade excluding the cost of centering and shuttering,inclduing cost of cement, stone aggregates, pulverised sand, all labour charges, cost of minor tools, transportation charges, GST, LWC , etc complete. All work up to plinth level 1:2:4 (1 cement, 2 pulverised sand and 4 grade stone aggregates 20 mm nominal size)

Providing and laying 1st quality Ceramic glazed floor tiles (300 x 300 mm, thickness to be specified by the manufacturer) conforming to IS 13753 of approved make like Nitco, Orient, Somany, Kajaria, or equivalent make laid on 20 mm thick bed of cement mortar 1:4 (1 Cement, 4 mainland river sand) including pointing the joint with white cement and matching pigment, including cost of cement, grey cement, white cement transportation charges of all materials to work site, all labour charges minor tools, LWC, GST etc, complete.

Providing and fixing of white vitreous China pedestal type water closet (European type WC pan) with seat and lid, CP brass hinges and rubber buffers, 10 litre low level PVC flushing cistern with fittings CI MS brackets, 40 mm dia meter flush pipe with fittings and clamps, over flow arrangement with special and mosquito proof coupling of approved municipal design including painting of fittings and brackets, cutting and making good the walls and floors wherever required (WC pan with white solid plastic seat & lid), including cost of all materials, transportation charges, minor tools, GST & LWC, etc, complete.

Removing white or colour wash by scrapping and sand paperig and preparing the surface smooth including necessary repairs to scratches etc including all labour charges, all materials minor tools & plants, transportation charges to all materials to the worksite LWC & GST etc, complete.

Applying one coat of cement primer of approved brand and manufacture on walls suface including cost of cement primer, brushes, scffolding arrangments, transportation charges, all labour charges, minor tools , GST & LWC etc complete.( For exterior works)

Painting two coat of good quality exterior emulsion anti-fungal paint of approved brand and manufacture heavily undercoated texture of old surface to give an even shade icnluding cost of paint cost of other materials, scaffolding arrangement, scrapping of existing paint surface wherever required, all labour charges, cost of minor tools, transportation charges, scaffolding charges, GST & LWC etc complete.

Painting one coat with approved terrocoat paint mixed in water with 1:1 ratio (terrocoat paint 1 part water on part on existing tiles surface including cleaning with brush and washing by flushing water, all labour charges, all materials minor tools & plants, transportation charges to all materials to the worksite LWC & GST etc complete.

i) Sliding Door Bolt Aluminium 300 x 16 mm

ii) Aluminium tower bolt 200 x 10 mm

iii) Aluminium Handle 100 mm