REPAIR MAINT OF LEAKAGE, SEEPAGE, JOINERY, FLOOR AND WALL TILES AND OTHER MISC WORKS AT DRDE GWALIOR UNDER GE (I) RND DELHI

Amount

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brickwork with sub class ‘B’ bricks, using old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on brick walls or concrete surface,finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 on brick or concrete surfaces as in ceiling soffits/including chajjas etc at any height finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new surface of ceilings, Soffits and applying two coats of white wash complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings exc 15 cm thickness complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (40 mm graded stone aggregate) in filling and mass concrete complete all as specified and directed.

M&L for applying evenly two coats of blown type bitumen at the rate of 1.50 kg per square metre each coat complete all as specified and directed.

M&L for polythene film, 150 micron thick, laid over and including a coat of bitumen primer, @ 0.30 to 0.50kg per sqm complete all as specified and directed.

M&L 25mm bore galvanised steel water tubing medium grade as in spouts of sunken floor etc including cutting through brick wall, taking out old unserviceable and making good complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions on faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. Note :- Water Proofing Compound shall be measured and paid separately as supply only.

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with CM 1:3 complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in roof kerbs, roof padding, on chajjas for slope, base of tank or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for Complete removal of existing roof treatment upto depth of original roof slab and removing entire rubbish off the premises, and applying Water proofing treatment and testing after completion of treatment are as under:- (a) Rendering 10mm thick in CM(1:4) mixed with water proofing compound @3% by weight of cement or as per manufacturer's instruction. (b) Applying a coat of approved bituminous primer @0.25 ltr/Sqm and allow to dry. ( c) Applying one coat of hot blown bitumen grade 85/[email protected]/Sqm. (d) Supplying and laying polymeric water proofing membrane of weight not less than 3Kg/Sqm . (e) Applying a coats of solor reflective bituminious aluminium paint @0.15 kg/sqm over the memberane complete all as specified and directed. Note: WPC shall be measured and paid seperately.

Supply only liquid water proofing compound complete all as specified and directed.

Dismanting floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-1 (20mm graded stone aggregate) in floors finish or levelling for slope complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 7 to 8 mm thick area of each tile exc 0.08 sqm but not exc 0.16 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10 mm thick rendering in cement mortar 1:4. complete all as specified and directed.

M&l for Non - skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for fully Vitrified light shade tiles 9-10 mm thick, area of each tile not exceeding 0.36sqm (square or rectangular) polished, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for Vitrified ceramic light shade coloured tiles as in skirting cut out from 8 mm thick, area of each tile not exceeding 0.36sqm (square or rectangular) polished, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for cutting chases in brick walls, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking up down steel tubing and connections 15mm bore including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up down steel tubing and connections 20mm bore including cleaning for re-fixing or removal from site complete all as specified and directed.

Fixing only 15mm bore galvanised steel water tubing with all fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed. Note :- Old serviceable GI tubing & fittings retreived from item Ser No 26.00 shall be resued.

Fixing only 20mm bore galvanised steel water tubing with all fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed. Note :- Old serviceable GI tubing & fittings retreived from item Ser No 27.00 shall be resued.

M&L for 15mm bore galvanised steel water tubing medium grade with all fittings fixed to wall and ceiling or laid in floors etc complete all as specified and directed.

M&L for 20mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors etc complete all as specified and directed.

Disconnecting existing water storage tanks of capacity exc 250ltr and not exc 500ltr, setting aside (or lowering if required) and hoisting if required, reconnecting and re-fixing in position after roof treatment etc complete all as specified and directed.

All as per item Ser No 32.00 above but exc. 500 Ltrs & not exc. 1000 Ltrs.

S&F rotational moulded polythylene water storage tank 500 litre capacity triple layered, cylindrical vertical with closed top, hoisted and fixed in position including dismantling old unserviceable PVC tank complete all as specified and directed.

S&F rotational moulded polythylene water storage tank 1000 litre capacity triple layered, cylindrical vertical with closed top, hoisted and fixed in position including dismantling old unserviceable PVC tank complete all as specified and directed.

S&F in repairs 15mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 142 gms) complete all as specified and directed.

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

S&F in repairs 25mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 455 gms) complete all as specified and directed.

S&F in repairs kitchen sinks made of stainless steel 1.00 mm thick with wastes coupling and washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs kitchen sinks with drainage board made of stainless steel 1.00 mm thick with wastes coupling and washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 15mm bore chromium plated cast copper alloy sink tap with swan neck type spout with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm dia cast copper alloy chromium plated long body fancy type bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm dia chromium plated cast copper alloy stop valves/angle valve, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodised hinging device complete all as specified and directed.

S&F in repairs brass chromium plated shower rose with swivel joints, 125mm dia, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs PVC connection 15mm bore 450mm long with 2 Nos PTMT end nuts with washer complete all as specified and directed.

S&F in repair vitreous China wash basin, white, flat back, size 550 x 400mm including CI/MS brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repair 32mm waste coupling of PTMT, half or full threaded (minimum weight 45gms) complete all as specified and directed.

S&F in repairs 32mm dia PVC waste drain pipe for WHB, urinal etc flexible type, strached length 90cm with PVC coupling socket complete all as specified and directed.

S&F in repairs 39/40 mm dia PVC waste drain pipe for sink, flexible type, stretched length 90cm with PVC coupling socket complete all as specified and directed.

S&F in repair 15mm dia chromium plated cast copper alloy fancy type pillar taps with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flyuts, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore brass chromium plated basin mixer for mixing hot & cold water screwed down for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (padestal pattern) white including fixing bolts, connection to drain (or outgoing pipe) and flush pipe etc complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provn of lean concrete bedding, connections to flushing pipe and making good disturbed portion of floor to match existing surface complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, brackets, PVC flush pipe inclduing connecting to WC complete all as specified and directed.

S&F in repair brass chromium plated health faucet with 1 m tube and hanging hook complete all as specified and directed.

S&F in repair 15mm bore brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair 15mm bore chromium plated cast copper alloy three way laboratory cock (deck mount installation type), screwed down, screwed for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs 15 mm dia chromium plated cast copper alloy two way stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs PVC lid for PVC water storage tank covers 500/1000 litres capacity complete all as specified and directed.

S&F in repair PVC acrylic bath cabinet including front mirror, size 350mmx450mm complete all as specified and directed.

S&F in repairs internal fitting of requisite pattern and size for 15mm bib tap, pillar tap, stop cock, angle stop cock etc of any description complete all as specified and directed.

S&F in repairs brass chromium plated jet spray of butterfly pattern for EWC with 1m long flexible tube provided with end nut and washer complete all as specified and directed.

S&F in repairs 32mm dia waste fittings brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end complete all as specified and directed.

Taking down PVC soil, waste and rainwater pipes (any size or pattern), including all fittings, shoes, bends etc. (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends any radius with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) bends any radius with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends provided with access door any radius with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) bends provided with access door any radius with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) branch piece provided with access door, single (single Y) equal or unequal with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) branch piece provided with access door, single (single Y) equal or unequal with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) junction single (Single T), provided with access door, equal or unequal with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) junction single (Single T), provided with access door, equal or unequal with rubber ring joints or jointed with solvent cement fixed to walls including cutting around for inserting into wall, roof slab etc. and sealing/making good to match the existing surface complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap plain with grating including skirting with solvent cement 75mm dia of outlet, fixed in repairs complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each including making good the distrubed surface complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exceeding 4 sqm each including making good the distrubed surface complete all as specified and directed.

Taking down shutter of any description not exc 1 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

M&L for cutting holes in brick walls built in cement mortar exc. half brick but not exc. one brick in for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required and finishing the surface to match with existing complete all as specified and directed.

S&F Pressed steel frames for doors 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and filling hollow of frame with PCC 1:3:6 type C-1 (20mm graded stone aggregate) complete all as specified and directed.

S&F Pressed steel frames for doors 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and filling hollow of frame with PCC 1:3:6 type C-1 (20mm graded stone aggregate) complete all as specified and directed.

S&F Second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for preparation of surfaces of wood and wood based materials of any description and girth such as ends of posts, backs of chowkats, etc., area tarred exc 0.1 Sqm but n exc 0.5 Sqm each and treated with tar or coal tar black paint complete all as specified and directed.

S&F in repair Mild steel hold fasts confirming to Fe 290 Gde 165 complete all as specified and directed.

M&L for preparation of surface of small articles of steel or iron articles of any description and girth such as holdfasts etc., area n exc 0.1 Sqm each and treated with tar or coal tar black paint complete all as specified and directed.

S&F 35mm thick second class hardwood glazed or gauged shutters, with plain, chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I, Sec 8, clause 8.24 (a) complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 30mm thick second class hardwood (kiln seasoned and chemically pressure treated) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Sec 8, clause 8.24 (b) complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as specified and directed.

S&F powder coated aluminium (thickness of powder coating not less than 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated aluminium (thickness of powder coating not less than 50 micron) window and ventilator shutters, side or top hung or sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, hinges, suitable handles complete all as specified and directed.

S&F 5.5mm thick sheet glass of any plain or tinted, ordinary quality and glazing with snap beading and rubber gasket in aluminium frames complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

S&F 30 mm thick solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rails; panelling of plain colour PVC sheet sealed to the stiles and rails with suitable PVC sheet beading, joined together with solvent cement complete all as specified and directed.

S&F in repair 18/ 19 mm thick pre laminated particle board interior grade prelaminated one side and white or other side with decorative choice lamination provided with 6mm thick (width equal to thickness of board) polished teakwood lipping all around, fixed to timber frame work/ steel frame work as in cup board shutter/ shelves etc complete all as specified and directed.

S&F in repair 18 mm thick wood plastic composite (WPC) panel fixed with suitable pins, screws, cleats and adhessive in cabinets body, shutters and shelves complete all as specified and directed.

S&F Mild steel bright finish or electrogalvanised continuous (piano) hinge 40mm width of flaps and fixed to cup board shutters complete all as specified and directed.

S & F stainless steel modular cabinet hinges with spring suitable to hold the shutter in open/shut position complete all as specified and directed.

S & F stainless steel cabinet handles 75mm size decorative type complete all as specified and directed.

S & F 35mm size magnetic catches fixed in modular type cabinets with MS plate (bright polished) on shutter complete all as specified and directed.

S&F 100 mm size aluminium anodised hasp and stapple safety type including bolt to hinge plate fixed with screws complete all as specified and directed.

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 100mm size mild steel butt hinges cold rolled, medium weight complete all as specified and directed.

S&F 75mm size mild steel butt hinges cold rolled, medium weight complete all as specified and directed.

S&F aluminium anodised barrel tower bolt extruded section, 200 mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolt extruded section, 100 mm long complete all as specified and directed.

S&F extruded anodised aluminium alloy handles fabricated type 150mm long grip complete all as specified and directed.

S&F extruded anodised aluminium alloy handles fabricated type 100mm long grip complete all as specified and directed.

S&F aluminium alloy anodised hooks and eye 150mm size complete all as specified and directed.

S&F 300 mm long aluminum alloy anodised sliding door bolt hasp staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F anodised aluminium alloy body door stopper and rubber shoe, overall length of cover plate 140mm complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm in wooden or metal frames complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass not exc 0.50 sqm in each pane fixed with wooden beads or putty in wooden or metal frames complete all as specified and directed.

S&F 3 mm thick figured glass not exc 0.50 sqm in each pane fixed with wooden beads or putty in wooden or metal frames complete all as specified and directed.

S&F in repairs 0.80mm thick plain, galvanised, mild steel sheeting on crumple joints with screws (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of overall size 75x900x250 mm made out of 1 mm thick sheet complete all as specified and directed.

BLANK

M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps and other similar situations and applying wax polish to match the shade of stone slab complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp or insulation etc) or insulation boards/ slabs/ blankets, any thickness, including framework of any description complete all as specified and directed.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for non asbestos fibre cement self finished and textured building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screw complete all as specified and directed.

Dismantling stone slabs blocks of any description, laid dry complete all as specified and directed.

M&L for 60mm thick factory made cement concrete M-35 grade paver blocks made by table vibratory method using PU moulds, glossy finish of approved colour, design & pattern, laying by vibratory compaction over and including 50mm thick bed of fine sand, including cutting paver blocks in required size and pattern, filling joints with sand and sweeping out surplus sand complete all as specified and directed.

Laying only 60mm thick paver blocks any description, by vibratory compaction over and including 50mm thick bed of fine sand, including cutting paver blocks in required size and pattern, filling joints with sand and sweeping out surplus sand complete all as specified and directed. Note : -Old serviceable paver blocks retrieved from Srl item No 130.00 Shall be re-used.

M&L for in repair factory made M-25 grade cement concrete kerb stone fixed in position to the required line, level and curvature jointed with cement mortar 1:3, making joints with or without grooves, thickness of joints not more than 5 mm (except at sharp curves) complete all as specified and directed.

S&F in repair mild steel 300 mm ordinary rat tail rod pattern door spring including roller & plate, welding on mild steel frames complete all as specified and directed.

S&F in repairs powder coated aluminium alloy drapary (curtain) rod 25mm dia fancy type complete all as specified and directed.

BLANK

M&L for preparation of new steel or iron surfaces over 10 cm width or girth and two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair stainless steel brackets for curtain road complete all as specified and directed.

S&F in repair stainless steel side funnel for curtain rods complete all as specified and directed.

lodhi builders

M/s Mahesh Engineering Works

M/S YOGANSH CONSTRUCTION CO.