Improvement of BT road and construction of c.c drain at baidya raj nagar 1s t lane at W.N-27.

Dismantling & removing cement concrete including the useful materials for reuse & removing the debris with in 50 mt lead.

Earth work in all kinds of soil including rough dressing and levelling the bed.

Supply and filling the F & P with filling sand of approved quality with well watered & rammed including cost, conveyance, royalty & all taxes, etc., complete.

C.C (1:4:8) with 4cm size HG CRUSHER BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C

R.C.C work of M-20 grade with 20mm & down grade BHG C/B chips including hoisting, laying & all cost, conveyance, royalty & taxes etc. comp. to work site as per the specification approved by the deptt. & direction of EIC.( Data for 15 cum)

Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge

Rigid & smooth centering & shuttering for R.C.C. and C.C. works including false works, dismantling and removing them from the site after casting, curing including cost of materials etc., complete.

6mm thick cement plester (1:4) to RCC surface finish smooth including closed deep chiping & slury treatment including all cost conveyance royalty and taxes etc. comp.

Cleaning the existing granular base surface including removal of binding materials and other foreign materials with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous

Providing and applying Tackcoat with bitumen emulsion on prepareed surface of granular base including clearing of the road surface and spraying primer @ 0.20 kg / sqm using mechanical means as per cluse 502 of MoSRT & H srecification for road & bridge works. unit -sqm. Taking out put - 3500 sqm

granular surface ROAD SURFACE

b.t surface ROAD SURFACE

Providind and laying "BITUMINOUS MACADAM" with hot mix plant using crushed aggregates of specified grading premixed with Bituminous binder of 60/70 penetration grade of bitumen transportred to site laid over a previously prepared surface with a hydrostatic paver finisher with mechanical control to the required grade level and alignment and rolling with smooth wheeled vibrating and tandem rollers to achieve the desired compaction as per clause 504 of MoSRT&H specification for Road & Bridge works. Data for 205 Cum (450 Tonne)

Labour for laying semi-dance bituminous concrete with batch type hot mix plant using crushed agreegate of specific grading, premixed with bituminous binder of 60/70 penetration grade of bitumentransported to site, laid over a previously prepared surface with hydrostastic sensor paver finisher to the required grade, level & allignment rolling with smooth wheel, vibratory & tendem rollers to achive the desired compaction as per clause-508 of MoRTH specification for road & bridge works (4th revision) unit-cum, taking out put-195 cum

Cleaning,lifting and transporting excavated earth by truck with in 5.0Km. Lead including loading and unloading etc.complete

Labour for blinding the sand on road surface with sand including cost, conveyance of materials etc complete

Providing and laying of Hot applied thermo plastic compound 2.5mm thick including reflectorysing glass beads at the rate 250gm per sqm area as per IRC.35 The finished surface to be level,uniform and free from streaks and holes etc.complete as per specification.