Survey, Design, Supply, Erection, Testing and Commissioning for Creation of 250 KVA Substation at Pittanbarn (STP-3) and creation of 63 KVA Substation at Ice factory (IPS-7) under NRCP, GOI in District Udhampur on turnkey basis

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for erection of 11 KV line with 50mm², ACSR Rabbit Conductor on 9 mtr ST poles for creation/Installation of 250 KVA Sub Station at Pittanbarh (STP-3) under NRCP (GOI).

9 mtr. Long ST Pole (ST-410 SP-33)

11 mtr. Long ST Pole (ST-410 SP-56)

GI V Cross -arm with top Bracket including clamps

GI Channel X-arm including clamps and Braces

50 mm^2 ACSR Conductor Rabbit

PG Clamps for 50mm² ACSR Conductor

11KV Disc Insulators (Polymeric 45KN ) creepage distance 320 mm with tension fittings

11KV Pin Insulator (Polymeric) with Pins (12kv, 5KN) Creepage Distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing complete by GI Rod 20 mm, 2.5 mtr long through G.I. Strip 25X3 mm

Painting of 11 mtr and 9 mtr ST poles with one coat of Red oxide Paint.

Painting of 11 mtr and 9 mtr ST poles with two coat of Aluminium Paint.

Cement bottoming 1:2:4 mix as per REC standards, 0.5 cum/pole

Galvanised Stay Set with 50x8mm stay clamp, guy insulator (2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for creation/Installation of 250 KVA Sub Station at Pitanbarh (STP-3) under NRCP (GOI).

11/0.433kV, 3-phase 250 KVA Distribution Transformer with Bimetallic Terminal Connectors Energy Level-2, Copper wound and with LV Cable Box having detachable Aluminium Gland plate

Gapless surge arrestor 9KV, 10KA, LA with polymer housing station type

11kV GO Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

300 mm² Single Core Cable,1.1kV Grade, PVC Insulated Alumnium Stranded Conductor FRLS type

9 mtr. Long ST Pole (ST-410 SP33)

11KV Disc Insulators (Polymeric 45KN ) creepage distance 320 mm with tension fittings

11KV Pin Insulator (Polymeric) with Pins (12kv, 5KN) Creepage Distance 320mm

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

LT distribution box for 250 KVA DTR with MCCB for incomer and SfU's for outgoing circuits.

Cement bottoming of ST poles in 1:2:4 mix as per REC standards, 0.5 cum per pole

Painting of sub station ST poles/cross arms/clamps with one coat of Red oxide and two coats of aluminium paint

Danger Plates with Clamps

GI Barbed wire for Anti Climbing

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239. GI Strip for neutral earthing of size 50 mm x 6 mm & 32mm x 3mm for connection of transformer body, G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber with RCC slab cover.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator (2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedge connectors/PG Clamp

3 phase 4 wire Trivector meter with CT

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for Erection of 2 no. 11 KV Tapping Point/Isolation Points at Mid Span for creation of 250 KVA Sub Station at Pittanbarh (STP-3) under NRCP (GOI).

9 mtr. Long ST Pole (ST-410 SP-33)

GI V Cross -arm with top Bracket including clamps

GI Channel X-arm including clamps and Angle for braces

11 KV GO, AB Switch 3 phase, 3 pole, 200 Amp, Vertical Type.

0.05 ACSR Rabbit conductor

PG Clamps for 50mm² ACSR Conductor

11KV Disc Insulators (Polymeric 45KN ) creepage distance 320 mm with tension fittings

11KV Pin Insulator (Polymeric) with Pins (12kv, 5KN) Creepage Distance 320mm

Galvanized Nuts and Bolts

Painting of 8 mtr ST poles with one coat of Red oxide Paint.

Painting of 8 mtr ST poles with two coat of Aluminium Paint.

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Cement bottoming 1:2:4 mix as per REC standards, 0.5 cum/pole

Earthing complete by GI Rod 20 mm, 2.5 mtr long through G.I. Strip25X3 mm

Galvanised Stay Set with 50x8mm stay clamp, guy insulator (2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for erection/shifting of 0.4 Km of 50 mm², LT ABC on 8 mtr long ST poles for creation/Installation of 250 KVA Sub Station at Pittanbarh (STP-3) under NRCP (GOI).

8 mtr. Long ST Pole (ST-410 SP-15)

50 mm sq. AB LT Cable (3X50 +1X16+1X35mm^2) XLPE (1.1 kv, 3+IC AL)

Suspension/Tension Clamp with eye hook

PG Clamps for 50mm² ACSR Conductor

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing complete by GI Rod 20 mm, 2.5 mtr long through G.I. Strip 25X3 mm

Painting of 8 mtr ST poles with one coat of Red oxide Paint.

Painting of 8 mtr ST poles with two coat of Aluminium Paint.

Cement bottoming 1:2:4 mix as per REC standards, 0.5 cum/pole

Insulating Piercing Connector

Galvanised Stay Set with 50x8mm stay clamp, guy insulator (2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for erection of 11 KV line with 50mm², 11KV ABC on 9 mtr ST poles for creation/Installation of 63 KVA Sub Station at Ice Factory (IPS-7) under NRCP (GOI).

9 mtr. Long ST Pole (ST-410 SP-33)

50 mm² AB (HT) Cable (3x50 + 1x70 mm²) (3C+Earth)

Heat Shrinkable Outdoor Cable Termination Kit

Suspension/Tension Clamp with eye hook

Galvinized Nuts and Bolts.

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing complete by GI Rod 20 mm, 2.5 mtr long through G.I. Strip25X3 mm

Painting of 9 mtr ST poles with one coat of Red oxide Paint.

Painting of 9 mtr ST poles with two coat of Aluminium Paint.

Cement bottoming 1:2:4 mix as per REC standards, 0.5 cum/pole

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for creation/Installation of 63 KVA Sub Station at Ice Factory (IPS-7) under NRCP (GOI).

11/0.433kV, 3-phase 63 KVA Distribution Transformer with Bimetallic Terminal Connectors Energy Level-2, Aluminium wound and with LV Cable Box having detachable Aluminium Gland plate

Gapless surge arrestor 9KV, 10KA, LA with polymer housing station type

11kV GO Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

120 mm² Single Core Cable, 1.1kV Grade, PVC Insulated Alumnium Stranded Conductor FRLS type

9 mtr. Long ST Pole (ST-410 SP33)

11KV Disc Insulators (Polymeric 45KN ) creepage distance 320 mm with tension fittings

11KV Pin Insulator (Polymeric) with Pins (12kv, 5KN) Creepage Distance 320mm

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

LT distribution box for 63 KVA DTR with MCCB for incomer and SfU's for outgoing circuits.

Cement bottoming of ST poles in 1:2:4 mix as per REC standards, 0.5 cum per pole

Painting of substation ST poles/cross arms/clamps with one coat of Red oxide and two coats of aluminium paint

Danger Plates with Clamps

GI Barbed wire for Anti Climbing

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239. GI Strip for neutral earthing of size 50 mm x 6 mm & 32mm x 3mm for connection of transformer body, G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials and earth Chamber with RCC slab cover.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator (2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedge connectors/PG Clamp

LT Prodigy Meter

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for Erection of 11 KV Tapping Point at Mid Span for creation of 63 KVA Sub Station at Ice Factory (IPS-7) under NRCP (GOI).

9 mtr. Long ST Pole (ST-410 SP-33)

GI V Cross -arm with top Bracket including clamps

GI Channel X-arm including clamps and Angle for braces

11 KV GO AB Switch 3 phase, 3 pole, 200 Amp, Vertical Type.

0.05 ACSR Rabbit conductor

PG Clamps for 50mm² ACSR Conductor

11KV Disc Insulators (Polymeric 45KN ) creepage distance 320 mm with tension fittings

11KV Pin Insulator (Polymeric) with Pins (12kv, 5KN) Creepage Distance 320mm

Galvanized Nuts and Bolts

Painting of 8 mtr ST poles with one coat of Red oxide Paint.

Painting of 8 mtr ST poles with two coat of Aluminium Paint.

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Cement bottoming 1:2:4 mix as per REC standards, 0.5 cum/pole

Earthing complete by GI Rod 20 mm, 2.5 mtr long through G.I. Strip25X3 mm

Galvanised Stay Set with 50x8mm stay clamp, guy insulator (2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for Erection/Shifting of 0.4 Km of 50 mm², LT ABC on 8 mtr long ST poles for creation/Installation of 63 KVA Sub Station at Ice Factory (IPS-7) under NRCP (GOI).

8 mtr. Long ST Pole (ST-410 SP-15)

50 mm sq. AB LT Cable (3X50 +1X16+1X35mm^2) XLPE (1.1 kv, 3+IC AL)

Suspension/Tension Clamp with eye hook

PG Clamps for 50mm² ACSR Conductor

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing complete by GI Rod 20 mm, 2.5 mtr long through G.I. Strip 25X3 mm

Painting of 11 mtr ST poles with one coat of Red oxide Paint.

Painting of 11 mtr ST poles with two coat of Aluminium Paint.

Cement bottoming 1:2:4 mix as per REC standards, 0.5 cum/pole

Insulating Piercing Connector

M R ENGINEERS & TRADERS

M/S RATHER CONSTRUCTIONS AND TRADERS

vijay builders