Balance Work for Special repairs to Building No. TR-33, TR-34, TR-35 (JCO/OR Living) TR-13, TR-14, TR-23, TR-25, TR-27 (SM Barrack) TR-44 (Cook House and Dining Hall) TR-04, TR-05, TR-06 (Store and Trademen Shop) P-726 (A to H) OR Married Accn at Mil

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.0 Sqm each complete all as specified & directed.

Taking down shutters exceeding 1.0 Sqm but not exceeding 2.0 Sqm each complete all as specified & directed.

M&L for 1.25 mm thick pressed steel sheet frame for door of size 105mm x 60mm with one or more rebates including necessary fixing arrangement such as lugs, hinges, lock strike plate etc including one shop coat of red oxide primer complete all as specified and directed

M&L for 1.25 mm thick pressed steel sheet frame for door of size 125mm x 60mm with one or more rebates including necessary fixing arrangement such as lugs, hinges, lock strike plate etc including one shop coat of red oxide primer complete all as specified and directed.

Supply & fix 35mm thick, factory made glazed and skeleton shutter of 2nd class hard wood open rebated and prepared to receive glass, gauge etc, without sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. Sizes of members as specified in SSR Part-I, Section 8.24 (a) and fitted to chowkhats complete all as specified and directed. Note :- The species of timber shall be Hollock/Bonsom.

S&F 35mm thick, factory made plain framed panelled (two panels) shutters of 2nd class hard wood with lock rail and panel inserts of 9mm thick BWP commercial ply or 12mm thick veneered particle board flat pressed three layered conforming to IS-3097 exterior grade-I type- I duly ISI marked general purpose commercial veneered on both side bonded with (BWR) type phenol formaldeyde synthetic resin-adhesive, the size of rails and styles as per IS-1003 Part-I, Kiln seasoned and chemically pressure treated including one shop coat of pink primer complete all as specified & directed. Note :- The species of timber shall be Hollock/Bonsum

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube 19mm x 19mm size complete all as specified & shown in relevant drawing of item No. 08095 in MES Schedule (Part-II) and directed.

S&F factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in mild steel frame welded/ sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement, complete, all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) and directed.

S & F 75mm long Aluminum hasp & staple, safety type, with mild steel hinge pin including bolt to hinge plate fixed with screws complete all as specified and directed.

S&F 75mm long aluminium handles, anodised, cast type complete all as specified and directed.

S & F 75mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 100 mm long mild steel butt hinges cold rolled medium weight, fixed with steel screws complete as specified & directed.

S&F 100 mm long PTMT butt hinges , fixed with steel screws complete as specified & directed.

S&F 200 mm long anuminium anodised barrel tower bolt of extruded section fixed with steel screws complete as specified & directed.

S&F 150 mm long PTMT tower bolt fixed with steel screws complete as specified & directed.

S&F 150 mm long mild steel barrel tower bolt barrel stove enamelled black with bright bolt complete all as specified & directed.

Supply & fixing 300 mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified & directed.

S&F 250mm long mild steel sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.

S&F 150mm long cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F 150mm long extruded aluminium handles, anodised, fabricated type complete all as specified and directed.

S&F 125 mm long PTMT door handles , fixed with steel screws complete as specified & directed

S&F 250mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

M & L in repair 18mm thick block board, grade 2 quality, interior grade,decorative type with decorative face veneer on one face,fixed with screws to timber frame work with 6mm thick teak wood lipping fixed with nails as in cup board shutters, shelves complete all as specified & directed.

M & L in repair for 18mm thick prelaminated particle board, interior grade conforming to IS-12823 Gde-I, prelaminated both sides with decorative choice lamination,fixed with screws to timber frame work with 6mm thick teak wood lipping fixed with nails as in cup board shutters, shelves complete all as specified & directed.

M&L for 2nd class hard wood (Sal) plain solid straight chowkhats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified & directed.

S&F mild steel ventilators box type with sash bars dovetailed or welded ready for wire mesh/glass pan including one shop coat of red oxide primer, complete all as specified & directed.

S&F steel window box type with side hung shutters including pin type hinges with steel handle and 2 Nos 150mm long mild steel tower bolt,fixing lugs etc complete with glazing bars dovetailed or welded complete all as specified & directed.

S&F steel window box type with side hung shutters including pin type hinges with steel handle and 2 Nos 150mm long mild steel tower bolt,fixing lugs etc complete without glazing bars dovetailed or welded complete all as specified & directed.

S&F Mild steel framed work as in grills, grating, railings etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railing, frame work for water tanks and similar work conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M & L for plain cement concrete (1:3:6) type C-0 using 12.5mm graded stone aggregate as in filling in pressed steel frame and other similar items etc complete all as specified and directed.

M & L for plain cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in padding/ levelling concrete on top of roof slab or manhole and other similar items etc complete all as specified and directed.

M&L for PCC (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete or filling in sunken floor complete all as specified and directed.

S&F Sheet glass 3.0mm thick pin head type and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified & directed.

S&F figured glass 3.0mm thick pin head type and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified & directed.

M&L for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surface already treated with red oxide primer over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling of plain or corrugated AC sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified and directed.

M&L for 6mm thick AC sheets (corrugated, semi corrugated) in roof fixed with L type, J type or cranked bolt complete all as specified and directed.

M&L for 6mm thick AC serrated ridge sheets for roof, fixed with L type, J type or cranked bolt complete all as specified and directed.

S&F anodised aluminium snap grid size 600mmx 600mm frame work for false ceiling including hangers 6mm dia aluminium (Up to 1.2 mtr long) adjusting level fixed to roof slabs by means of cleats made out of Aluminium flat 40x3mm size 60mm long fixed complete all as specified and directed. Make of aluminium section: Jindal/ HIndalco/ Indalco

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made out of Aluminium complete all as specified and directed.

Dismantling of timber scantling 40 sq cm and over in section and in any position unframed work complete all as specified and directed.

M&L second class timber scantling 40 sqcm and over in section as in fillets, rails, posts, rafters, purlins in any position complete all as specified and directed.

S&F Mild steel bolts exceeding 12mm dia and not exceeding 20mm dia purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and directed.

Taking down cement plaster of any description from brick walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of wall in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick or concrete surfaces of walls in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified & directed.

M&L for 15 mm thick rough cast plaster over & including rendering 10mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces complete all as specified & directed.

M&L for 10 mm thick rendering in cement mortar (1:3) on fair faces of concrete surfaces of ceilings finished even and smooth without using extra cement complete all as specified & directed.

M&L for preparation of new plastered and unplastered surfaces of wall and applying two coats of distemper oil emulsion complete all as specified & directed.

M&L for complete removal of existing treatment from old plastered surfaces of wall and applying two coat of oil bound distemper over a coat of chalk whitening complete all as specified & directed.

M&L for preparation of new plastered or unplastered surface of walls and applying two coats of cement based paint over a coat of white wash complete all as specified & directed.

M&L for preparation of old decorated plastered or pointed surfaces of walls and applying one coat of cement based paint complete all as specified and directed.

M&L for preparation of new plastered or unplastered surface of wall and applying three coats of white wash complete all as specified & directed.

M&L for preparation of new plastered or unplastered surface of ceiling and applying three coats of white wash complete all as specified & directed.

M&L for preparation of old decorated, plastered or pointed surfaces of wall applying one coat of white wash complete all as specified & directed.

M&L for preparation of old plastered surface of ceiling and applying one coat of white wash complete all as specified & directed.

M & L for 50mm thick plain cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

M&L for 60mm thick M-35 grade machine pressed precast concrete interlocking paving blocks factory casted using with grey cement and pigment of any shape and size as directed conforming to IS 15658-2006 having compressive strength not less than 350 Kg/ Sqcm laid over and including 25mm thick layer of sand including filling the interstices complete all as specified and directed.

M & L for (machine made) pre-cast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in kerb stone of any size with plain fair faces, smooth finish, including chamfering, weathering, throating etc set in cement mortar 1:4, including necessary form work and excavation & earth work for embedding kerb stone at a depth as directed & temping around kerb stone and removal of surplus soil to a distance n.exc 50 metre & depositing where directed complete all as specified and directed.

M&L for non skid coloured ceramic joint free tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

All as per Sl item No 65 here-in-before but on vertical surfaces over and including 10mm rendering in cement mortar (1:4) finished even and fair complete all as specified and directed.

M&L for glazed ceramic coloured tiles 450mm x 350mm x 7mm thick as in vertical surface such as skirting, dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for 20mm to 25 mm thick machine cut Kota stone slab of size 55cm x 55cm (minimum) as in flooring laid over cement mortar screed base, jointed with grey cement slurry mixed with pigment to match the shade of slab over and including 20mm thick screed bed in CM 1:6 including rubbing, grinding and polishing complete all as specified and directed.

M&L for 20mm to 25mm thick machine cut kota stone slabs as in vertical surfaces such as risers of steps, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing & polishing also moulding edges laid over and including 10mm thick rendering in cement mortar (1:3)complete all as specified and directed.

M&L for rubbing and mirror polishing of existing old Kota stone floor complete all as specified and directed.

M&L for 18mm to 20mm thick green marble slab single piece (minimum length of slab 2.00 mtr) machine cut as in cooking platform & shelves, laid over cement mortar screed base, jointed with grey cement slurry mixed with pigment to match the shade of slab over and including 15mm thick screed bed in CM 1:4 and pointed in white cement with admixture of pigment to match the shade of the marble including rubbing, grinding, polishing and moulding edges complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15cm thickness (below or above ground level) of any description complete all as specified and directed.

M&L for reinforced cement concrete (1:2:4) type B-1 (using 12.5mm graded stone aggregate) for slab supported on walls, chajjas and other similar works complete all as specified and directed and directed.

M & L for 40mm thick plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floors finished even and fair complete all as specified and directed.

Taking up or down 15mm dia, steel tubing & connections including cleaning for refixing complete all as specified and directed.

Taking up or down 20mm dia, steel tubing & connections including cleaning for refixing complete all as specified and directed.

S&F mild steel water tubing of size 15mm bore (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

All as per Ser item No 77 here-in-before but fixing only (except pipe) old mild steel tubes with new fittings complete all as specified and directed.

S&F mild steel water tubing of size 20mm bore (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

All as per Ser item No 79 here-in-before but fixing only (except pipe) old mild steel tubes with new fittings complete all as specified and directed.

S&F in repairs, 15mm dia stop valve cast copper alloy with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed.

S&F in repairs, 20mm dia stop valve cast copper alloy with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed.

S&F 110 mm bore PVC (SWR) pipe single socketed in any length with joints fixed to walls inlcuding mild steel flat iron clamp of required size complete all as specified and directed.

Demolition of cement concrete as in manhole foundation, and bedding of sewer lines etc below ground level and disposal of rubbish to a distance exceeding 1km but not exceeding 1.5km complete all as specified and as directed.

Demolition & breaking up drain pipes (salt glazed ware, AC or reinforced concrete) 150mm bore set in cement mortar including concrete around pipe in any description and removing rubbish material outside MD land from the site to a distance exceeding 1Km but not exceeding 1.5Km complete all as specified and as directed.

Supplying, laying, jointing and testing reinforced concrete pipes 150mm bore ISI marked , class NP-2 laid and jointed with collars complete all as specified and directed by Engineer-in-Charge.

M&L for 100mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested complete for 150mm bore pipes complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed.

M & L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in benching for manholes, bands, coping, bed plates including necessary form work with plain fair faces, including chamfers, weatherings, throating etc complete with joints to match complete all as specified and directed.

M&L for extra for forming fair finish to drain or channel exc 20cm PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as PCC benching for manholes, bands, coping, bed plates including slightly rounded or chamfered angles including necessary formwork etc complete all as specified and directed.

Material and labour for lime concrete terracing as specified on roof trowelled smooth surface complete all as specified in MES Sch Part-I and Part-II and as directed.

Demolition of mud in roofs any thickness, including plastering and leeping plaster complete all as specified and directed.

Material and labour for wire brushing and cleaning top surface of roof or cement concrete and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20kg per sqm complete all as specified and directed.

Dismantling of brick tiles laid flat or on edge on roof/floor and pointing in cment mortar of any description complete all as specified and as directed.

M&L for 40mm thick brick tiles laid on mud mortar & joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed.

All as per Srl item No. 95 above but except brick tiles complete all as specified and directed.

M&L for polythene film, 300 micron thick laid on roof over conforming to IS Specification complete all as specified and directed.

Dismantling 50mm/75mm/100mm bore cast iron drain pipes including fittings jointed in cement mortar and taking out from trenches/ or from walls all as specified & directed.

S&F 100mm bore cast iron centrifugaly cast spun IS-3989 soil, waste and vent pipe in any length with or without ears ,fixed to walls, with cement joints complete all as specified and directed.

All as per Ser item No 99 here-in-before but fixing only with provision of new mild steel clamp of required size.

S&F 75mm bore cast iron sand cast soil, waste and vent pipe in any length with or without ears ,fixed to walls, with cement joints complete all as specified and directed.

All as per Ser item No 101 here-in-before but fixing only with provision of new mild steel clamp of required size.

S&F 100mm bore cast iron branch pieces single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branch with oval access door complete all as specified and directed.

S&F 75mm bore cast iron branch pieces single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branch with oval access door complete all as specified and directed.

S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers ( larger bore measured) with oval access door fixed with cement joints complete all as specified and directed.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door fixed with cement joints complete all as specified and directed.

M&L for 75mm/100mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified and directed.

Supply & fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified & directed.

S&F in repair vitreous china wash basin white, flat back of size 550x400mm including brackets, 300 mm long, 32 mm dia brass waste coupling including cutting for and pinning in end of brackets or erecting stand etc and including 15mm dia fancy type chromium plated pillar tap cast copper alloys with capston heads, screwed down with long screwed shanks and fly nut screwed complete all as specified and directed.

S&F stainless steel sink with draining board made out of 1.00mm thick kitchen or laboratory with plugs, washers, waste pipe, cast iron cantilever brackets and connecting union to waste pipe; overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm including taking down existing chinaware sink complete all as specified and directed. Make : Prayag Model No 1128, Blue Star Model No BSSBSD-49, Jayana Model No SBSD-05

S & F in repair vitreous China squatting pan 'Orissa' pattern of size 580mmx440mm white with integral foot rest (excluding flushing cistern) but including 'P' trap set in and including lime concrete complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia and plastic seat cover with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed.

S&F in repairs 15mm bore bib tap fancy type, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm dia stop valve cast copper alloy chromium plated long shank and cup, concealed type with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed.

S&F in repair 15mm dia angle valve cast copper alloy, chromium plated, concealed type with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed.

Supply and fix in repair PVC low level flushing cistern 10 litre capacity, valveless syphonic action type with float, handle including flush pipe of polythene of low or high density of PVC 32mm dia, 60cm long and bracket etc and making connection including making good disturbed portion complete all as specified and directed.

S&F in repairs brass chromium plated shower rose of size 125mm with or without swivel joints including fixing to iron pipe complete all as specified and directed.

S&F PTMT soap shelf of approximate size 450x125x40mm and fixed with chromium plated brass screws complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia; 'D' type, 600mm long between flanges fixed to plug with chromium plated brass screws including wooden or plastic cleat complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank (cylindrical vertical triple layered white colour with closed top) hoisted and fixed in position of capacity 1000 litres including 25mm bore GI washout pipe 15 cm long fitted with check nut, 20mm bore over flow pipe 0.20 metre long fitted with brass anti-mosquito nest coupling at the end of over flow pipe & 15mm bore GI air vent pipe 0.20 metre long fitted with tee at the end of air vent pipe (all GI pipes shall be medium grade) complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank (cylindrical vertical triple layered white colour with closed top) hoisted and fixed in position of capacity 500 litres including PTMT ball valve high pressure with polythene float and fly nut suitable for 20 mm bore GI pipe, 25mm bore GI washout pipe 15 cm long fitted with check nut, 20mm bore over flow pipe 1.50 metre long fitted with brass anti-mosquito nest coupling at the end of over flow pipe & 15mm bore GI air vent pipe 1.30 metre long fitted with tee at the end of air vent pipe (all GI pipes shall be medium grade) complete all as specified and directed.

S&F stainless steel plate rack of size 900mm x775mm x 250 made out of 1mm thick stainless steel of first quality complete all as specified and directed. Make: Anupam International Model No KPR-311 or equivalent make and model approved by GE.

S&F 20mm bore ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule all as specified & directed.

Supply and fixing drapery curtain rod 20mm dia, fancy type, fabricated out of mild steel sheet not less than 20 guage, including brackets and pair of decorated end knobs (finials), stop roller etc, pretreated powder coated natural color complete all as specified & directed.

Demolition of brick work or stone /boulder masonry, built in cement mortar or cement lime mortar including all quoins, pillars etc of any description and in any position complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed.

M & L for TMT bars 10mm dia and over cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified & directed.

M & L for mild steel reinforcement TMT bars 6 mm to 8mm dia cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed.

Material and labour for brick work in wall using Fly Ash bricks (old size bricks) straight or curved on plan to any radius built in cement mortar (1:6) complete all as specified & directed.

Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, & getting out complete all as specified and directed.

Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified & directed.

Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed.

M & L for cutting into existing manholes for connecting new 150mm internal dia drain pipe, making good pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching as required complete all as specified and directed.

M&L for 20mm thick Granite (of approved type and colour) work (table rubbed and polished) as in cooking platforms, stair case landing or steps and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with approved shade of granite including cutting and moulding the edges half round on exposed side over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 Kg of cement per Square metre complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) as in floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and as directed. Make : Dr Fixit/Fosroc/BASF/STP

M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below and as directed by Engineer-in-Charge. :- (a) applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface (b) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc. (c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:4:8 over the coating as per requirment (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete as specified Manufacturer. Make:- Dr. Fixit/Fosroc/STP Note: (i) The treatment shall be carried out by approved authorised applicator approved by CWE as per the manufacturers instructions and as directed by the Engineer in charge. (ii) The Plan area of floor (sunken) shall be considered for payment and provn of cement work except PCC in sunken filling item 34 is included in quoted rate for this item. (iii) PCC filling in sunken portion will be measured seperately.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including fittings such as switches, ceiling roses, pendent holders, light fittings any type, sockets, regulators etc and making good disturbed surfaces of walls and floors etc to match with the existing surfaces complete all as specified and directed.

Taking down carefully old distribution boards with MCB's by unscrewing from boards complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable drawn in and including concealed PVC regid conduit including provision of 2.0mm thick pressed steel sunken terminal boxes 60mm deep, suitable length and painted with red oxide primer for mounting switches, sockets, fan regulators covered with and including 3mm thick bakelite plastic laminated sheet top cover fixed flush with wall using brass screws & cup washers including 1.5 Sqmm PVC insulated solid copper conductor wire as earth continuity to common earth and connecting to earth dolly for one light point controlled by one switch, bell push or one fan point controlled by one switch complete all as specified and directed.

All as per Srl item No 142 here in before, but for one socket outlet 5/6 Amps on independent board complete.

All as per Srl item No 142 here in before, but for one 3 pin socket outlet 5 Amps on same board complete.

All as per Srl item No 142 here in before, but with multi-stranded copper conductor FRLS PVC unsheathed cable of cross sectional area 2.5 Sqmm for one switch socket combination 6 pin, 5/15 Amps on independent board including 1.5 Sqmm PVC insulated solid copper conductor wire as earth continuity to common earth dolly.

All as per Srl item No 142 here in before, but for one light point controlled by two 2 way swiches on independent board complete all as specified & directed.

S&F switch piano flush type single pole one way 5/6 Amps, 230 volts complete all as specified & directed.

S&F switch piano flush type single pole two way 5/6 Amps, 230 volts complete all as specified and directed.

S & F bell push flush type 5/6 Amps 230 volts complete all as specified and directed.

S&F socket outlet two-in-one, 3 pin, 5 Amp flush type complete all as specified & directed.

S&F switch piano flush type single pole one way 15 Amps, 230 volts complete all as specified and directed.

S&F socket outlet two-in-one, 5 pin, 15 Amp flush type complete all as specified and directed.

S&F electronic bell ding dong type, AC 230 Volt single pole complete all as specified and directed.

S&F ceiling rose polycarbonate surface bakelite 65 x 50mm size three terminals complete all as specified and directed.

S&F speed regulator suitable for ceiling fan 1200mm/ 1400mm sweep, socket size, electronic type 400 Watt complete all as specified and directed.

Taking down existing ceiling fan/ exhaust fan of any size and Hanging/ refixing only ceiling fan / exhaust fan and making electric connections with 0.60RM long flexible cable of size 23/0.0076 mm complete all as specified and directed.

S&F PVC Lamp holder insulated with backalite etc suitable for batton fittings and including LED Lamp 9 watt complete all as specified and as directed.

Supply and fixing Baton integrated LED channel (Integral sleek extruded aluminium LED channel with white acrylic cover ) tube light fitting wall mounted complete with rod, driver and all other accessories including electric connection connecting with using flexible copper wire twin core 23/0.2mm upto ceiling rose/connector complete all as specified and directed confirming to Make : BCLSB 18 WH No. 112409 of Bajaj or equivalent in Havells Cat No LHEXBLP7UN1W018 / Philips

S&F water tight bulk head fitting, comprising of connector galvanised cast iron back plate, weather proof enameled gallery, glass well, and including 10 Watt LED lamp all as specified and directed complete conforming to Make :Bajaj cat part no. BIBWP 10W LED or equivalent cat part of Philips / Havells Cat part No. LHEOAOPTUZ6W010

S&F decorative LED wall mounted decorative luminaires with OPAL polycarbonate diffuser and IP65 protection including LED lamp 10watt and connecting complete all as specified and directed. Make - Bajaj cat No. BLWOV 10W LED or equivalent model in Havells LHJCO2108499

S&F in repair compact & decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1x 12 watt fitting including LED lamp 12 watt complete all as specified. Make: Bajaj / Philips/ Havells as approved.

S&F factory made sheet metal enclosure for double door distribution board with epoxy powder coated surface mounted SP & N 8 way, protection class IP-43 suitable for mounting MCB, conforming to IS-8623, BS-5484 with 200 Amps rated copper bus bar stove enameled dust and vermin proof suitable for working on 240 volts AC supply complete all as specified & directed.

S&F MCB 40 Amp, 240 volts, SP & N with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and directed.

S&F MCB 63 Amp, 240 volts, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and directed.

S&F MCB 6 to 40 Amp, 240 volts, SP with over load and short circuit protection and rupturing capacity not less than 10 KA complete all as specified and directed.

S&F factory made sheet metal enclosure for double door distribution board with epoxy powder coated surface mounted TP & N 4 way, protection class IP-43 suitable for mounting MCB, conforming to IS-8623, BS-5484 with 200 Amps rated copper bus bar stove enameled dust and vermin proof suitable for working on 415 volts AC supply complete all as specified & directed.

S&F in replacement sub main wiring with two runs of single core PVC sheathed insulated copper cable of 6 sqmm size, multi stranded 1100 volts grade drawn-through and including 25 mm dia non metallic PVC conduit and junction boxes terminal boxes and accessories such as tees, bend elbows, reducers, bell mouth tube ends fixed concealed in wall including one run of 4 sqmm copper conductor unsheathed multi stranded earth wire earth continuty conductor complete all as specified and directed. Note ;- Two runs of 6 Sqmm copper cable and one run of 4 sqmm copper wire earth continuty conductor and conduit with accessories shall be measured as one length)

S&F in replacement sub main wiring with two runs of single core PVC sheathed insulated copper cable of 6 sqmm size, multi stranded 1100 volts grade drawn-through existing PVC conduit and junction boxes terminal boxes and accessories such as tees, bend elbows, reducers, bell mouth tube ends fixed concealed in wall including one run of 4 sqmm copper conductor unsheathed multi stranded earth wire earth continuty conductor complete all as specified and directed. Note ;- Two runs of 6 Sqmm copper cable and one run of 4 sqmm copper wire earth continuty conductor and conduit with accessories shall be measured as one length)

Supplying, laying, jointing and testing and commissioning in replacement 16 sqmm, 4 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed. Note :Excavation, earth work, sand cushioning and brick protection required for item shall be measured and paid separately under respective items of BOQ.

M & L for brick protection with old size sub class 'B' bricks laid flat , length of bricks across the route of underground cable complete all as specified and directed.

M & L for sand cushioning with river washed and screened dry fine sand to under ground cable after laying the cable jently punning down complete all as specified and directed. NOTE;- Thickness after punning shall be considered for payment.

Supply and fix in replacement GI pipe 40 mm bore light grade for protection of cable including provision of clamps, nuts, bolts etc required for fixing pipe along pole / wall / laid under the road / laid under the floor or in trenches complete all as specified and directred.

Supplying and fixing in replacement stiffeners, supports, clamps and back plates fabricated from MS steel sections including nuts, bolts, washers, welding, binding cold or hot, drilling holes for bolts, in any shape or size as indicated or directed complete all as specified and directed. Note :Exposed steel surface shall be treated with two coats of aluminium paint over a coat of red oxide primer and unexposed surface of steel sections shall be applied one coat of red oxide primer.

Supply and fixing in replacement of any type LED street light fittings 25 watt LED drawn aluminium housing in grey finish with clear acrylic and cast aluminium pipe mounting attachment including fixing to wall/ on pole including fixing arrangement with suitable galvanized iron pipe 35mm boe light grade brackets 2 mtr length bent to shape required including clamps, buts/ bolts/ washers etc connecting with suitable flexible copper wire of size 23/0.0076 testing complete all as specified and directed. Makes:- Syska Cat No. SSK-ST-25W or equivalent in C&S and make as approved by GE.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel & wiremesh, PCC chamber in cement concrete (1:2:4) type B-1 and CI cover with frame, excavation & earth work complete all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. complete all as specified and directed. Notes :- (i) GI wire upto earth test point/ equipment is included in this item. (ii) Outer edge of earth pit chamber shall be 1 metre away from the outer edge of PCC chamber. Note : A sum of Rs. 1,25,698.00 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 40 & 41 (Schedule of Credit) of Tender documents

M/s Balvinder Singh Engineer and Contractors

BABA FARID CONSTRUCTION CO

M/S BSS AND SONS