GEK-21/2021-22

Amount

Schedule 'A' Section - I

Taking down carefully copper/AImn point wiring (Light,Fan/Point Socket or power) (fittings such as switches ceiling roeses, pendent, regulators, sockets etc to be measured & paid seprately) & making good to disturbed surface of walls/floors etc.

M&L point wiring using approved colour coding as per IS with stranded FRLS copper conductor single core 1.5 Sqmm (Nominal area), PVC insulated cable in and incl casing-n-caping medium grade with all connecting accessories incl mild steel sunken boxes suitable for mounting switch/sockets with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer incl mounting frame over cover plate, covered with 3mm thick plastic laminated sheet, incl PVC insulated FRLS copper conductor 1.5 Sqmm (Nominal area) single core PVC cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified. Note : (i)Switch/sockets shall be measured and paid for separately.

One light point controlled by one switch

One switch socket outlet 3 pin,5 Amp on the independent board

One switch socket outlet 3 pin,5 Amp on same board

All as per item No 2.00 here-in-before but with 1100 volts grade stranded FRLS copper conductor single core 2.5 Sqmm (Nominal area )single core flame retardant low smoke (FRLS) PVC insulated and unseathed cable ISI-694 marked TEC and FIA approved in and including PVC casing-n-caping. ISI marked with all accessories PVC junction boxes mild steel sunken boxes (terminal boxes) made out of 1.5 mm thick MS steel suitable for switches/ sockets with earth dolly duly painted both internally and externally with two coats of anti corrosive paint over a coat of red oxide primer covered with and including 3 mm thick plastic laminated sheet including flame retardant low smoke (FRLS) PVC insulated unsheathed stranded copper condutor 2.5 sqmm (nominal Area), 1100 volts grade single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed. Note : (i)Switch/sockets shall be measured and paid for separately.

M&L point wiring using approved colour coding as per IS with stranded FRLS copper conductor single core 1.5 Sqmm (Nominal area), PVC insulated cable in and incl PVC conduit (ISI marked) including cutting chiseling and grouting concealed PVC conduit pipe, tee, elbow and bend etc.and with all connecting accessories incl mild steel sunken boxes suitable for mounting switch/sockets with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer incl mounting frame over cover plate, covered with 3mm thick plastic laminated sheet, incl PVC insulated FRLS copper conductor 1.5 Sqmm (Nominal area) single core PVC cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified. Note : Switch/sockets shall be measured and paid for separately.

One light point controlled by one switch.

One switch socket outlet 3 pin,5 Amp on the independent board.

One switch socket outlet 3 pin,5 Amp on same board.

All as per item No 4 here-in-before but with 2 single core PVC insulated FRLS and sheathed copper conductor of size 2.5 Sqmm in and including PVC conduit (ISI marked) including cutting chiseling and grouting concealed PVC conduit pipe, tee, elbow and bend etc.and with all connecting accessories with 2.5 Sqmm PVC insulated FRLS copper conductor as earth wire and connecting to common earth dolly for 6 pin 16 Amp socket outlet on the independent board.using 2.5 sqmm copper cable .

S&F Lamp holder,PVC insulated body, with back plate suitable for batten fitting.

M& L switch piano, flush type, single pole 1 way 6 Amp,ISI marked completeall as specified.

S&F switch piano flush type, single pole 1 way 16 Amp ISI marked completeall as specified.

M& L socket 5 pin 6 Amp piano flush type,ISI marked completeall as specified.

S&F socket out let 2 in one 6 pin 6 & 16 Amp, ISI marked completeall as specified.

S&F ceiling rose, 3 phase/ PVC/ polycorbonate,isolate bady, ISI marked completeall as specified.

S & F LED bulb 10 watt.

Supply and fixing Decorative box type fitting Pre-wired for and incl LED tube 18/20 watt 6000K 4 ft IP20 linear LED T8 tubular lamp with extruded aluminium/PC body and PC diffuser complete with inbuilt driver complete all as specified and directed.

Supply and fixing wall Mounting LED fitting 9/10 watt 6000K 2 ft Basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver complete all as specified and directed.

S&F sleek LED mirror light with diffuser 7/ 9 watt along with all accessories prewired including connecting with copper flexible cable of size 0.7 Sqmm 3 core and all as specified and directed .

S & F replacement Bulkhead luminaire Decorative Energy saving new generation 10W LED IP65 with opal diffuser incl electronics driver & connection with copper flexible cable 3 core complete all as specified and directed.

S & F LED Building security light 30 watt pressure die cast housing with individuals LEDs & Lens with modular secondary optics and IP65 protection with electronics driver and copper conductor 3 core of 0.7 sqmm from ceiling rose to security light.

Supply & Fixing Bracket made out of GI light grade pipe of 32 mm dia 1.5 mtr long bend to an angle of 120 degree with fixing arrangements on wall Complete all as in repair.

S &F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, TPN 4 way, 415 Volt .

S &F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 6 way, 240 Volt .

S &F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 8 way, 240 Volt .

S & F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 4 way, 240 Volt.

S & F MCB, 'C' curve SPN, 240 V, 25-32 Amp 240 volt breaking capacity 10 kA

S & F MCB, 'C' curve TPN, 415 V, 40 Amp breaking capacity 10 kA

S & F MCB 'C' curve single pole 6 to 32 Amp, 240 volt breaking capacity 10 kA

M&L for submain wiring with 2 single core PVC insulated FRLS cable 6 Sqmm copper conductor PVC sheathed in and including rigid PVC conduit heavy duty of suitable size incl cutting chiseling of wall and making good to disturbed surface of walls / floor etc with plastering painting etc so as to match with the existing finishes, drawn with 6 Sqmm PVC insulated copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified. Note: For payment purpose 3 runs of 6 sqmm cable will be measured as one run”

M&L for submain wiring with 2 single core PVC insulated FRLS cable 6 Sqmm copper conductor PVC sheathed in and including rigid PVC casing -n-caping, drawn with 6 Sqmm PVC insulated copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified. Note: For payment purpose 3 runs of 6 sqmm cable will be measured as one run”

M&L for submain wiring with 2 single core PVC insulated FRLS cable 4 Sqmm copper conductor PVC sheathed in and including rigid PVC casing -n-caping, drawn with 4 Sqmm PVC insulated copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified. Note: For payment purpose 3 runs of 4 sqmm cable will be measured as one run”

S & F 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection twin core cable flat of size 10 sqmm.

Earthing complete with and including galvanised steel earth plate electrode 60 cmx 60cm x 6 mm thick surrounded by mixture of charcoal and salt in alternate layers , buried directly in ground vertically in a pit of depth not less than 2.25 meter deep below ground level with top as of the plate at a depth of not less than 1.5 mtrs below normal ground level connected to galvanized iron or steel earth lead wire 4.0 mm dia,(No 8 SWG) by means of bolts ,nuts, check nuts and washers of galvanised iron or steel earth wire protected by galvanised steel pipe 15 mm bore (light grade) and connected to main switch or main control board all as shown in electrical plate No. 3 of SSR - 2009(Pt I) & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers, 20 mm bore GI pipe (Light grade ) for watering , protection pipe funnel, wire mesh , PCC 1:2:4 type B1 chamber in cement concrete ,50 mm thick precast RCC M-25 ( Design mix) cover duly reinforced with XPM (weight not less than 3 kg /sqm ) and CI frame etc , and including provision of test point , connecting to test point and testing on completion etc, complete all as specified. NOTE : The unit rate include earthing lead and protection pipe upto 6.5 metre from top of earth plate.

Amount of credit of Rs. 37450.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

R B TRADERS

M/s Parmod Kumar

Vasudeva Trading Co.

Ayushmat Contractors

M/S JOHN VASSELLY

NARINDER KUMAR SONS

Pankaj Traders

bharat refrigeration and electric co.