Construction of Balance work for District Court Complex at Kupwara Part A

Amount

Providing and laying in position ready mix concrete M-20) in RCC for all types of structures including proper vibration and curing including broom finish if required but excluding the cost of formwork and reinforcement etc all complete as per drawing ,specification and direction of EIC. With contractors RMC plant (including transit mixers, concrete pump/crane )for concreting below FGL(including cost on account of cube tests and quality control).

Centering and shuttering including strutting, propping etc. and removal of form for:

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Columns, pillars, piers, abutments, posts and struts.

Suspended floors, slabs, roofs, landings, balconies and access platforms.

Supplying, cutting, bending to shape, fabricating, fixing and tying in position TMT Reinforcement Steel of Fe 500D Grade at all levels and location as shown in the structural drawing. The reinforcement shall be of an approved brand viz. TATA/SAIL/VIZAZ or equivalent and the rate shall include cost of supply & tying reinforcement with 18 gauge GI building wire in the reinforcement rate. The unit rate shall also include cost of all related operations VIZ. inputs of labour, materials tools and tackle, equipment, machinery etc complete. Formeasurement purpose actual quantity for reinforcement bars provided and authentic laps or couplers provided shall be considered.

Providing ,cutting ,fabricating, drilling, erecting, riveted, bolted, welded connections, hoisting and placing in position MS structural steel composed of channels, beams,Tubular Hollow sections, Hoists, Angles, Braces,Foundation Bolt, Anchor Bolts for supporting system including cost of all materials, consumables, labour, applying one coat of red oxide primer, one coat anti corrosive paint. complete in all lead and lifts as per drawings and specifications and / or as directed by EIC. up to desired height in trusses, purlins, rafters, staircases where ever required. Details as per structural drawing for any span.

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :(Cement mortar 1 :6 (1 cement : 6 coarse sand)

Half brick masonary with common burnt clay F.P.S ( non modular) brick of class designation 75 in superstructure above plinth level upto floor V level: 1:4(1 cement 4 coarse sand

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): 2nd class deodar wood.

15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) (including cost of all material, leads, lifts and carriages etc upto site of work complete).

12 mm thick cement plaster on ceilings, etc. in (1 cement: 4 fine sand mix). Upto floor V level complete in all respects (including cost of all material, leads, lifts and carriages etc. upto site of work complete).

Providing and fixing plain eves boarding (300mm x 40mm ) first class kal wood fixed with screws etc, including all carraiges .All job completed

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete.0.63mm thick with zinc coating not less than 275gm/m2

Providing valleys of 90cm wide overall in plains G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G I. limpet and bitumen washers complete.1.60mm thick with zinc coating not less than 350gm/m2

Providing colour coated corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.25 mm thick with zinc coating not less than 350 gram/m2

Supplying and fixing of following sizes of medium class PVCconduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of M.S Fan Box 20 Guage in the Ceiling complete as required as per the Directions of the Engineer Incharge.

Supplying and fixing of 75 mm X 75 mm X 60 mm deep metal box as required as per the Directions of the Engineer Incharge.

Carriage of material by mechanical transport

sand stone aggregate below 40MMM Av. 25kms

STEEL av 100 Av kms

BRICKS Av 120 kms

M/S RIYAZ AHMAD WANI

M/S MAGRAY CONSTRUCTIONS

Abdul Latif Ganie