Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹50.0 LAccepted-AOC | L1 | Accepted-AOC AOC DUE TO L1 BIDDER | |
| 2 | L2₹53.3 L+₹2.4 L (4.80%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹54.0 L+₹3.2 L (6.23%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹55.2 L+₹4.3 L (8.51%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹55.3 L+₹4.5 L (8.77%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
6 Sept 2024, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MOHAN SINGH YADAV, IDSE
GE TENGA
SPECIAL REPAIR OF BOUNDARY WALL AT MES COMPLEX BLDG NO LT40 TO LT46 TOILET BLOCK SEWAGE LINE WITH SEPTIC TANK AT DOGRA AND PROVISION OF LADIES TOILET BLOCK SEPTIC TANK SOAK PIT AT MTN DOU OF AGE B/R AND AGE E/M UNDER GE TENGA
2024_MES_667851_1
8632/E8
Open Tender
Civil Works
Item Rate
180 days
TENGA VALLEY
PL REFER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹0
₹95,000
Yes
7 Oct 2024
25 Jul 2024
7 Sept 2024
25 Jul 2024
6 Sept 2024
8 Aug 2024
Amount
Demoltion of brick work/precast concrete block walling built in cement mortar complete all as specified & directed.
Taking down cement plster on brick or brick work or stone walls etc including taking out joints hacking for key scrubbing down with water etc
Excavation in trenches not exc 1.5 m wide and not exc 1.5 deep and getting out in loose /Soft soil for coloumns
M&L for PCC 1:4:8 type D2 using 40mm graded agg as in fdn filling and mass concrete in foundation filling and mass concrete etc.
M&L for Formwork to sides to concrete foundations, footings,bases of coloumns,raft and raft beams, sides and soffits (if any) of foundations and plinth beams; and similar work; vertical or to batter (footing of coloumns and gate+plinth beam)
Formwork to sides of pillers, posts, struts, piers, coloumns and stanchions (including gate coloumns)
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cracking, bending spirally for hooping for coloumns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips(footing +coloumn +gate)
Ditto above as per item No 07 but 5mm dia and over upto and including 10mm dia in stirraps, spacers and binders(coloumns+plinth beam+gate)
M&L for RCC nominal mix 1:2:4 Type B1(20mm graded agg) for foundations, including rafts, footings, foundation beams;plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concreate for coloumns
M&L for RCC 1:2:4 type B1(20mm graded aggregate) as in columns, pillars, piers, posts and struts
M&L for re-inforced cement concrete 1:2:4 type B-0 (12.5mm graded aggregate) as in beams, plinth beams, cantilevers, bressummers, lintels over 1.5 m span etc complete.
M&L for PCC 1:3:6 type C1(20mm graded agg) precast cement concrete block masonry with Solid blocks exc 10cm in width and setting in CM 1:6 etc complete.
M&L for rendering 10mm thick in CM 1:6 on concrete surfaces finished even and smooth w/o using extra cement
M&L for newly plastered surfaces of walls and applying two coats of cement based paint, over a coat of primer complete all as specified and directed.
Returning/filling in including spreading, levelling, watering and well ramming inlayers n.exc 25 cm in hard/dense soil.
Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the straight point.
S & F framed work such as grills, gratting,framed brackets of angles or tees with web and flange cut to shape etc with ends of bars, shouldered and/or reveted, or forged into spikes, framed guard bars, framed works of water tankes stagging,gates and similar work con-forming to Fe.290.Gde-E-165.
M&L for preparation of new or previously untreated surfaces of any description, over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
S&F Pre-Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.
S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and similar work con-forming to Fe.290.Gde-E-165.
S & F Rolled sections as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated and similar work con-forming to Fe.290.Gde-E-165.
S & F Rolled mild steel of grade Fe-410-W (Gde E-250) (quality A) in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.
M&L for screed bed or bedding layer of 15mm thick in cement mortar 1:4 for laying floor tiles etc all as specified.
M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete
M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete
S & F of Mild steel (1.25mm thick), plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed
Supply and fix, 0.63 mm thick corrugated galvanised mild steel sheeting (minimum 275gm/sqm galvanising) with two corrugations side lap, fixed with L type or J type or cranked hooks , bolts and washer in roof, complete, all as specified and directed.
Material and labour for preparation of old steel surfaces of any description, over 10 cm width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Dismantling Timber scantling 40 sq cm and over in section , in any position all as specified and directed.
M&L for cleansawn Second class hard-wood scantlings with framed work.complete all specified and directed
M&L for painting of new or previously untreated wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n exc 4.0 Sqm each including iron mongeries complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
Supply and fix MS butt hinges medium weight, cold rolled 125mm size complete all as specified and directed.
Supply & fix Aluminium anodised barrel tower bolt 150 mm long of extruded section etc complete all as specified and directed.
Supply & fix Aluminium anodised barrel tower bolt 75 mm long of extruded section etc complete all as specified and directed.
Supply & fix Extruded Aluminium anodised alloy handles fabricated type 150mm long complete all as specified and directed.
Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm each including iron mongeries complete all as specified and directed.
S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete
S&F 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats of windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) complete all specified and directed
Supply and Fixing sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)
M & L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match.
Dismantling of floor, hearth or wall tiling including cement mortar bedding
M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles .
M & L for Glazed white ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.
M&L for preparation of newly plastered surfaces and applying 3 coats of white wash, complete all specified and directed.
M&L for preparation of old plastered surfaces and applying 2 coats of white wash, complete all specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removing rubbish off the premises complete all as specified and directed.
M&L for PCC 75mm thick type C-2, 1:3:6, (40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement. complate all specified and directed
M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as cement concrete in Sub-base floors, sub-bases floors and pavings etc complete all as specified.
S&F in Repair fancy type Bib taps 15mm size, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixedcompleta all specified and directed
S&F in repairs of Vitreous China Squatting pan 'Orissa pattern' size 580 x440 mm white with integral foot rest.complete all specified and directed
S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or floors. complate all specified and directed
M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) bed to drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm bore pipe complete all as specified and directed
S&F PVC (SWR) bends any radius with access door, 110mm dia.complate all specified and directed
S&F PVC (SWR) bends any radius with access door, 75mm dia. complate all specified and directed
S&F PVC (SWR) junction single, (Single T) equal or unequal of dia110mm. complate all specified and directed
S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenches or floors.complate all specified and directed
Taking up or down 15 mm bore steel tubing and connections.
Taking up or down 20 mm bore steel tubing and connections.
S&F in 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complate all specified and directed
S&F for 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complate all specified and directed
S&F Grating doom 100 mm dia with with waste hole of PTMT (mminium weight 25 gms)
S & F for 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complate all specified and directed
S&F PVC connection of 15 mm size with PTMT nuts of length 600 mm.complate all specified and directed
S&F for 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
Dismantling water tanks exc 500 ltr but nexc 1000 ltrs capacity and removing to store
S&F for PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified
S&F Rotational mounded polythene water storage tank of 500 ltrs capacity, (multilayered, cylindrical, vertical with closed top) hoisted and fixed in position as specified in SSR Pt-I.
S&F for ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil
Excavation over areas n exc 1.5 m deep and getting out in hard/dense soil.
Excavation in trenches n,exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil.
M&L for precast cement concrete solid building blocks (1:3:6), type C-1, 10 cm thick (with plain or interlocking joints as directed) setting in cement mortar (1:4), complete, laying inner side of wall.
M&L rendering 15 mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cement .
M&L for rendering 15 mm in CM (1:6) over concrete wall surfaces finished even and smooth without using extra cement.
M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface.
M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in sub base of floorings.
S & F 3mm thick figured glass, pin head glazing with oil putty /wooden beads in squares n exc 0.50 Sqm in each pane.
S&F 100mm size stainless steel butt hinges, medium weight, cold rolled complete with stainless steel screw etc. all as specified as directed.
S & F in repair vitreous china wash down water closet pan (pedastal pattern) white incl PVC (SWR) 110mm 'P’ trap and WC connector (exclusing fixing bolts, flushing cistern and flush pipe)
S&F in rep Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F in repair toilet paper holder of brass,chromiun plated or stainless steel
S&F vitreous china bowl urinal flat back, size of 465x355x265 mm white (minimum), (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs, fixing of flush pipe, waste pipe, grating and connection to water supply pipe complete all as directed.
S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe(minimum weight 60 gms).
S&F PVC (SWR) bends any radius, bend 110mm dia.
S&F PVC (SWR) vent cowl 110mm dia
S&F PVC (SWR) WC connector 110mm dia lip ring.
S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.
S&F 15 mm dia bib taps, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between fllanges.
S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in ends of brackets or errecting stand but exclusive of fixing of waste pipe and CI brackets complete all as specified and directed.
S&F 32 mm bore Low density poly ethylene pipes of pressure rating 6kgf/cm2 fixed complete to walls,ceiling or in floors etc.
Supply and fix in rep 15mm Central Hole brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
M&L for swivel shower rose of PTMT any colour for fixing with 15mm pipe.(Min Wt 40gms) all as specified and directed.
S&F Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe and fixed.
M&L for construction of 1.20 m dia x 3.00 m deep soakage well, excavation in hard/dense soil foundation PCC 1:3:6 ,wells of honey combed stone masonry wall, including intercepting chamber, screen chamber, RCC cover slab, filling with brick bats etc complete all as specified.
M&L for construction of septic tank for 10 users, in hard/ dense soil, foundation in PCC 1:3:6 type C-1, stone masonary wall in CM 1:4, RCC slab cover including RCC precast manhole cover having 6mm plate embedded all around/ fibre reinforced cover with angle iron frame vent shaft and sludge chamber complete all as specified in ED-2007 and as directed.
Material and labour for providing PCC (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 150mm on after they are laid and tested complete all as specified and directed..
Material and labour for Salt glased stone ware drain pipe 150 mm dia grade A laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.
Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.
All as per item No. 105 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size
All as per item No. 105 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed.
All as per item No. 105 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 4 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 4 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified.
S&F Socket outlet 2 in 1, 5 pin, 6 amp flush type
S&F Socket outlet 2 in 1, 5 pin, 5 and 15 amp flush type
Supply & fixing switch piano flush type (ISI marked), single pole, one way 16 Amp, 240 Volts complete all as specified & directed.
Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
Supply and fixing lamp holder, insulatted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed.
S&F LED lamp 9/10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min).
S&F LED light fitting 1x 20 Watt AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed
S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed.
Supply and fixing LED light fitting 1 x 10 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed.
Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 4 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.
S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 V complete all as specified and directed.
S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed.
S&F of 1100 Volts grade heavy duty ISI marked cable PVC insulated multi stranded aluminium conductor one twin core cable flat or circular of size 16 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections , of size 10 Smm 2 core.
Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc)
Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC.
Taking down service wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm
M/S ASHOK CONSTRUCTION (BID ID -3087886)
M/S DK TRADERS (BID ID -3088067)
M/S Karkies Construction & Co. (BID ID -3088040)
M/S LARZAWANGPU AGENCIES (BID ID -3088189)
M/S SM ANSARI (BID ID -3088163)
M/S SANGE TRADERS (BID ID -3088168)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .