Upgradation Of Tents To Porotherm Block Cottages At Gopinatham

Upgradation Of Tents To Porotherm Block Cottages At Gopinatham

Demolishing thatch roofing including mats,bamboo,jaffari etc.complete including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per directi...

Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles above 25 mm a...

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) It No 5.4 page no. 9, Vol-2 PWD CSR 2023-24

Providing and laying in Cement Concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and removing centering, shuttering, strutting, propping etc.., and remove of form work for sides and soffits of beams, beams haunchings, cantilevers girders and lintels not exceeding 1m in d...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite / trap / basalt crushed graded coarse aggregates and fine aggregates as per relevan...

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m heigh...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite...

Providing and removing centering, shuttering, strutting, propping etc.., and remove of form work for sides and soffits of beams, beams haunchings, cantilevers girders and lintels not exceeding 1m in d...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite...

Providing and removing centering , shuttering , strutting , propping etc and removal of form work for flat surface such as suspended floors, roofs landing and etc....thickness upto 200mm, including c...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 percentage and conforming to IS: 15622, of approved ...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corner...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elas...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows and other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Susp...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with 100 percentage Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior pa...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67 ltr/10 m² over and including priming coat of exterior primer applied at 2.20 kg/10 m²) wi...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite...

Providing and removing centering , shuttering , strutting , propping etc and removal of form work for flat surface such as suspended floors, roofs landing and etc....thickness upto 200mm, including c...

Providing and laying clay slab filler block size of 14''x10''x3'' concrete steel reinforcement to be calculated seperately including cost of all materials,labours as per specification. MR

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :125x70x4 mm (ordinary type) t No 12.75.2 page no. 107, Vol-2 PWD CSR 2023-24

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10mm. It No12.76.3 page no. 107, Vol-2 PWD CSR 2023-24

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. It No 12.60 page no. 105, V...

Brass handles 125 mm with plate 175x32 mm. It No 12.79.1 page no. 108, Vol-2 PWD CSR 2023-24

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete It No 20.28 page no. 200, Vol-2 PWD CSR 2023-24

LT ELECTRICAL WORKS PVC CONDUITS and ITS ACCESSORIES Open conduit System Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesiv...

b) 25mm dia 2mm thick Page No: 2 of 105 item 1.1.2 csr 23-24

Supplying heavy gauge PVC conduit pipe dia mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and cement pla...

b) 25mm dia 2mm thick Page No: 2 of 105 item 1.3.2 csr 23-24

Supplying and fixing PVC/metal conduit deep junction box.

a) 19/20mm deep junction box Page No 2 of 105 item no 1.5.1 csr 23-24

b) 25mm deep junction box Page No 2 of 105 item no 1.5.2 csr 23-24

Extra for Groove cutting in brick wall/cc floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing the wall upto wall surface complete. a) upto 50mm conduit in CC Floor ...

Supplying PVC/GI flexible conduit pipe….mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm..using...

Supplying and fixing Metal fan box with round hook. 25 mm Page No 4 of 105 item no 1.13 csr 23-24

Point wiring using copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase and Neutral) and 1 x1.0Sqmm (Earth wire) FRLS ...

b) Medium point above 3Mtr up to 6Mtrs from tapping point to out let via switch Page No 5 of 105 item no 2.2.2csr 23-24 box

c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box Page No 5 of 105 item no 2.2.3 csr 23-24

d) Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switch box Page No 5 of 105 item no 2.2.4 csr 23-24

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...

b) 2.5 sqmm Page No 5 of 105 item no 2.3.3 csr 23-24

c) 4 sqmm Page No 5 of 105 item no 2.3.4 csr 23-24

SWITCHES, SOCKETS and ACCESSORIES Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groo...

b) 3 Way Page No 8 of 105 item no 3.4.2 csr 23-24

c) 4-5 Way Page No 8 of 105 item no 3.4.3 csr 23-24

d) 6 Way Page No 8 of 105 item no 3.4.4 csr 23-24

e) 8 Way Page No 8 of 105 item no 3.4.5 csr 23-24

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

b) 3 Module Page No 8 of 105 item no 3.5.2 csr 23-24

c) 4 Module Page No 8 of 105 item no 3.5.3 csr 23-24

d) 6 Module Page No 8 of 105 item no 3.5.4 csr 23-24

e) 8 Module Page No 8 of 105 item no 3.5.5 csr 23-24

Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. a) 6 Amps one way Page No 9 of...

b) 6 Amps Two way Page No 9 of 105 item no 3.6.2 csr 23-24

c) 6Amps 3way socket. Page No 9 of 105 item no 3.6.3 csr 23-24

d) Stepped fan regulator Two Module Page No 9 of 105 item no 3.6.4 csr 23-24

e) 16Amps one way switch Page No 9 of 105 item no 3.6.7 csr 23-24

f) 32A,DP,Switch Page No 9 of 105 item no 3.6.9 csr 23-24

g) 6/16Amps universal socket Page No 9 of 105 item no 3.6.10 csr 23-24

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single phase ...

Supplying, fixing and wiring Residual Current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel Board. a) 32-40Amps 2 pole Page No 18 of 105 item no 5.20.4 csr 23-24

EARTHING AND L.T. U.G. CABLES Supplying fixing and wiring earth electrode for grounding of DG Sets etc. using 40mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reduc...

Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm GI Plate Page No 54 of 105 item no 12.58.6 csr 23-24

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 8 SWG Copper wire. Com...

Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5 perc...

Labour charges for laying of 1.1 KV class UG cable in the existing trench GI pipe / stoneware pipe / on wall / on pole as required. On wall / Structure - a) 2.5 sqmm to 25 sqmm common sr item no 21.0...

Supplying and fixing of Brass cable gland. a) 25mm common sr item no 63.01 csr 23-24

Aluminium End Terminal (Lug). a) 2.5 / 10 sq.mm common sr item no 61.01 csr 23-24

FANS Supplying exhaust fan of 1440RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC supply. Page no 30 item no 6.2.1 csr 23-24

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power inpu...

Fixing all types and all capacities fluorescent /false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23 / 0.00076 " twin twisted PVC insulated wires, requ...

Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing a 5 amps ceiling rose, necessary...

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. page no 57 item no 13...

LED LUMINAIRS / LIGHT FIXTURES and ACCESSORIES: Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications. Page...

Supplying of feet -PVC Batten with integrated LED tube. W with high quality diffuser with Life of 25000 burning hours and 70 percentage lumen maintenance with CRI greater than 80. Power Input: 220...

Supply of round/square recess/surface mounted rolling ype LED Downlight with WGU 10LED Lamp Rib Fabricated from die cast aluminium with white powder coated pre wired to mains connector and has swive...

TELEPHONE AND TELEVISION :

Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. a) T...

Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable. a) 2 Pair page no 36 item no 8.2.2 csr 23-24

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable. RG-6. page no 36 item no 8.3 csr 23-24

White vitreous china clay, WALL mounted European Water closet with frame & also with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 32 mm dia CP brass Concealed Cistern (all a...

White vitreous china clay, flat back wash basin size 630x450mm with a pair of 15mm C.P brass pillar taps with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and b...

Providing & Fixing in position shower set consisting of CP shower rose with CP shower arm, 15 mm dia CP single lever diverter with tipton spout wall flanges etc., complete. Jaquar continental item...

Providing and fixing SAIL stainless steel high gloss SS 304 kitchen sink conforming to IS 13983 : 1994 of SINGLE BOWL WITH SINGLE DRAIN BOARD bowl depth 200mm, with single bowl drain board, M.S / C.I ...

Providing and fixing 600x450mm bevelLead edge Mirror of superior glass with 6mm hard board backing and fixed to wooden cleats with C.P screws, washers, including cost of materials, labour complete as ...

Providing & Fixing in position CP health faucets including necessary fittings & specials etc., complete. Jaquar continental ITEM CODE: ALD-CHR-573. MR

Providing & Fixing in position toilet paper holder Jaquar continental ITEM CODE: FLR-1151N MR

Providing and fixing C.P. brass Towel rail 740mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per specifications..J...

Providing & Fixing in position CP towel ring including necessary fittings etc., complete. Jaquar continental MR

Providing & Fixing in position CP twin coat hook including necessary fittings etc., complete. Jaquar continental MR

Providing & Fixing in position soap dish Jaquar Continental ITEM CODE: FLR-1131N MR

Providing & Fixing in position CP concealed stop cock, 20mm dia with adjustible wall flange (toilet control valve) including necessary fittings & specials etc., complete. Jaquar Cat 087 MR

Providing & Fixing in position CP Angle cock 15 mm dia with wall flange (for electric water heater- 2no's each) Jaquar continental MR

Providing & Fixing in position CP bib cocks auto closing with built in control valve including wall flanges and necessary fittings & specials etc., complete.. Jaquar Cat 043 pressmatic series MR

Providing and Fixing in position CP Long body bib tap 15 mm dia with wall flange Jaquar continental. MR

Providing and fixing 25 Ltrs, Horizontal Electric Water heaters, including supports, etc., complete Make: Racold, Venus, Usha MR

Providing and fixing in position Liquid soap dispeserKimberly- Clark Professional,WINDOWS Series - i Skin Care Dispenser ITEM CODE:1141N

code: 02004 colour: White (Capacity : 500ml) MR

Providing and fixing in position following dia uPVC Pipe (10 kg/sqcm) including fitting and specials etc., complete. Supreme/Prince/Kissan with ISI mark. 32 mm dia (For wash basins) MR

Providing and fixing in position following dia uPVC (SWR-TYPE B)conforming to IS codes of latest edition including O ring joint, fittings such as Y, Tee branches etc., complete. Supreme/Prince/Ki...

111 mm dia (Internal, duct and ceiling) MR

Providing and fixing in position PVC Floor (P) trap 110 mm dia including joints including PVC inlet receiving cap etc., complete.Supreme/Prince/Kissan with ISI mark MR

Providing and fixing in position stainless steel gratings with cockroach traps. Make: chilly. MR

Providing core drilling 125 mm dia in beams along with PVC puddle flanges including bore packing etc., complete. MR

Providing and fixing in position following dia PVC cowls.Supreme/Prince/Kissan with ISI mark. a) 75 mm dia MR

b) 110 mm dia MR

Providing and fixing in position following dia uPVC (SWR) pipe including RUBBER RING fittings and specials. Etc., complete - PVC 4 kg/sqcm Supreme/Prince/Kissan with ISI mark. 110 mm dia rain wate...

Providing and fixing in position uPVC grating (leaf trap) for above pipes at terrace. 110mm dia MR

Providing and fixing in position MS bracket, clamps, hangers, saddles ,anchor plates and flats for installing pipes with holdfasts or welded to structural steel work as required at site. Rate t...

Providing and fixing in position PVC pipes Schedule 80 conforming to IS:15801 or cPVC SDR 11 as mentioned including jointing,fittings and specials. Etc., complete. 20 mm (NB) cPVC SDR...

25 mm(NB) cPVC SDR 11(Internal with wall chasing) MR

32 mm (NB) cPVC SDR 11 (Exposed on wall) MR

Providing and fixing in position forged brass ball valve PN 16 with SS ball and lever with all leads complete as per specifications. (zolotto make) 20 mm dia valves MR

25 mm dia valves MR

32 mm dia valves MR

Providing and fixing in position Pressure relief valves Including one union and nipple, effecting proper connections etc., complete. (Hawa make) 32 MM DIA zolotto make MR

Providing and fixing in position 15 mm Air Release Valve including effecting proper connection for following supplies. Approved make zolotto MR

Providing , 6 mm thick Rubberised foam insulation (Vidoflex/Armaflex) for hot water lines. 25 mm OD without cladding MR

25 mm OD with cladding MR

Providing and laying in position to required level or slope Upvc Pipes of 6 kg/sqcm for following outer diameters and jointing and haunching with 100 mm thick PCC 1:3:6 alround pipes, testing of pipes...

160 mm dia OD MR

Providing and fixing in position position 100 mm dia S.W GULLY traps square mouth GRADE 'A'in 1:2:4 PCC bed of 200 mm thick. The trap shall be enclosed in a table mould brick chamber of 300 x 300...

Providing and Constructing inspction chambers of following sizes and depths in table mould brick masonry in 1:6 C.M on P.C.C bed of 1:3:6 , 150 mm thick with offset of 150mm al-round and plaste...

600X600mm (clear internal) depth 750 mm -1000mm MR

450x450 mm (Rain water Catch basin) MR

Earthwork in excavation in all kinds of soil (excluding rock) in pipe trenches, its and similar locations including stacking the soil neatly from edges, filling back by the sides in 15 cm layers, ram...