REPAIR / MAINT OF INTERNAL ELECTRIFICATION, FLAME PROOF LIGHT FITTINGS, LED FITTINGS, CEILING FANS, WALL MOUNTED FANS, EXHAUST FANS, HIGH BAY LIGHTS, POST TOP LANTERN FITTINGS, MCB DBS, MCBS, SUB MAIN WIRING, POINT WIRING, GEYSERS UNDER AT INS UTKROS

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for point wiring with two run of PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm (FRLSH), PVC conduit medium grade/PVC casing caping and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc ) made of not less than 1mm thick and 6cm depth covered GI metal flush box and drawing one run of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor cable (FRLSH) as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and directed by Engr-in-Charge. (In ceiling Portion surface conduit wiring shall be carried out.) Note: The quoted rate inclusive for the following :- (a) Modular cover plate with frame of any module complete. (b) Proper colour coding is to be followed as per IS Specification. (c) wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.

(a) One light /Fan/Exhaust fan/wall fan point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps on independent board.

(c) One 3 pin socket outlet on same board.

All as per item No. 2.00 here-in-before but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket on independent board and provision of 2.5 Sqmm, FRLSH insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. .

All as per item No.2.00 here -in- before but wiring with 4.0 Sq mm FRLSH mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

One light point controlled by two 2 - w a y s w i t c h e s ,with cables1.5 sq. mm size complete all as specified and directed

S&F in replacement of Polycarbonate switch piano, flush button, single pole, one way 5 Amp , 240 volts ISI marked, Make Anchor/ Havells/Cona/ Leader (white colur)

Supply and fixing in replacement of Polycarbonate socket outlet 2-in-1, 5 pin 5 Amps, 240 volts, flush type Make Anchor/Havells/ Cona/ Leader (white colur)

S&F in replacement of with socket outlet flush type multipurpose 2 in 1, 5 pin 5 and 15 Amp, 230 volts complete as directed.

S&F in replacement of Polycarbonate switch piano flush button single pole one way 15 Amp 240 volt ISI marked, Make Anchor/Havells/ Cona/ Leader (white colur)

supply and fixing in replcement Modular switch 1 way 6A, 220V 50Hz 1module as per existing make and model complete all as specified and directed by Engineer-in-Charge.

supply and fixing in replcement Modular Socket, 6A - 2/3 pin combined ,220V 50Hz 2module as per existing make and model complete all as specified and directed by Engineer-in-Charge.

supply and fixing in replcement Modular Socket, 16A - 2/3 pin combined ,220V 50Hz 2module as per existing make and model complete all as specified and directed by Engineer-in-Charge.

supply and fixing in replacement Modular switch 1 way 16A, 220V 50Hz 1module as per existing make and model complete all as specified and directed by Engineer-in-Charge.

S & F in replacement of ceiling rose, surface type, 3 terminal, 240 V.

Supply and fix in replacement sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 20 Amp.

S & F in replacement of lamp holder PVC/polycarbonate type with back plate suitable for batten fittings with 9 Watt LED Bulb

S& F in replcement Modular Bell push 6A 1 module complete all as specified and directed.

S & F in replcement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

Supply and fixing in replcement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing in replcement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing in replcement round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete

Excavation in trenches nexc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose for laying cables, erection of poles complete all as specified.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified.

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point.

Takng down old unservicable cable and Supply, laying & testing XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, ISI marked laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 10 Sqmm nominal cross section x 2 core complete all as specified and directed.

Takng down old unservicable cable and Supply, laying & testing XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, ISI marked laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 16 Sqmm nominal cross section x 4 core complete all as specified and directed.

Takng down old unservicable cable and Supply, laying & testing XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, ISI marked laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 25 Sqmm nominal cross section x 3.5 core complete all as specified and directed.

Takng down old unservicable cable and Supply, laying & testing XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, ISI marked laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 35 Sqmm nominal cross section x 3.5 core complete all as specified and directed.

Supply and Fix Insulation tape of size 25 mm for cable protection complete all as specified and directed.

S & F in replcement 1.5 Sqmm 2 core Cable with copper conductor PVC round sheathed (flexible) industrial cable

Supply and fixing in replcement LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC box type fittings with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S & F in replcement LED strip rope light 6 Watt of length 5 meter red,blue,green,WH,WW or as required on site complete all as specified and directed.

S&F in replcement rope LED Light 1200 LEDs of length 10 m yellow Steady strip rice light complete all as specified and directed.

S& F in replcement 10 Watt surface flex spot with titlable and adjustable focus black body 4K PH 1774 with complete fitting and fixtures complete all as specified and directed by Engr-in-Charge.

S&F in replcement 9 Watt round B27 Basic LED Bulb warm white (2700-3200K) 825 Lumen,220 V Lumen efficacy 91.7lm/W complete all as specified and directed.

Taking down old unserviceable sub main wiring of any size and any discription all as directed by Engr-In-Charge.

M&L in replacement of Sub main wiring with two single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 1.5 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 1.5 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

M&L in replacement of Sub main wiring with two single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 2.5 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

M&L in replacement of Sub main wiring with two single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

M&L in replacement of Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 6 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

Taking down existing u/s fitting any type any size and Supply and fixing in replacement of LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge.

S & F in replacement of sheet metal enclosure for MCB, DB, TPN 415 Volts 200 amps rated busbar 4 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 with MCB as incommer and MCB SP/TP in outgoing complete all as specified and directed by Engr-in-charge..Make- Legrand/ Seimens/ L&T.

S & F in replacement of sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 8 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge.Make- Legrand/ L&T/ havells

S & F in replacement of sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 12 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge.Make- Legrand/ L&T/havells

S & F in replacement of sheet metal enclosure for MCCB, DB, VTPN, 415 Volts, 100 amps rated busbar, 4 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge.Make- Legrand/ L&T/ Schinder.

S & F in replacement of sheet metal enclosure for MCCB, DB, VTPN, 415 Volts, 250 amps rated busbar, 4 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge.Make- Legrand/ L&T/ Schinder.

S& F in replacement MCCB 3 Pole .415 V. fixed type, 25 to 100 Amps with breaking capacity 16 KA Complete all as specified and directed.

S & F in replacement MCCB 3 Pole .415 V. fixed type, 250 Amps with breaking capacity 16 KA Complete all as specified and directed.

Supply and fixing in replacement of 415V, TPN 40 to 100 Amps 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning

Supply and fixing in replcement rating 240V, SPN 32 Amps 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning

S&F in replacement of MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.Make- Legrand/ Seimens/ Schinder.

Supply and fixing of DP RCBO 30 mA 40 Amps SPN complete all as specified and dirested by Engr-in-charge.

M&L for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth strip 25x4mm connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 40 mm dia GI pipe medium grade for protection of GI earth strip and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I. Note: (i) Cost of GI earth strip and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, PCC chamber pit and test point complete. (iii) Cost of PVC insulated unsheathed copper cable of size 10 sqmm with suitable size of PVC conduit from test point to incomer DB of bldg shall be deemed to be included in the rate quoted for this item.

S & F in replacement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

Taking down & Supply and fixingceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor.(BLDC) with hook for hanging ceiling fan.Note : Old unserviceable fan to be deposited in AGE E/M-II yard.Make: crompton/havells /Usha

S&F exhaust fan 300 mm sweep compete with louvers including all civil work like cutting and making circular opening in existing wall etc ,including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make:Bajaj/Usha/CG.

S&F wall mounting fan 450 mm sweep 240 V,single phase IP 65 Protection with die cast aluminium hosing jerk free oscillation & smooth running comprising of high performance high speed motor for higher air delievery incl provision of three core flexible PVC Cable with stranded copper conductor size 1.5 sqmm connecting up to ceiling rose including all accessories complete.

Supply & fix in replacement LED High bay , 150 W complete all as specified and directed.

Taking down carefully storage type water heater (Geysers) of any make and any capacity at any height opening for inspection compete Including heating element inner copper tank etc. De-scaling cleaning and re-assembling of Geysers after repairs carrying out and re-fixing in same position (spares as required for repair geyser are measured and paid separately) including making good to walls with CM (1:3) or PCC (1:2:4) and plastering the wall surfaces with CM 1:6 and replacement of old nuts, bolts and rubber gasket etc all as directed by the Engineer-in Charge.

Taking down and Supply and Fixing 1.5 KW capacity Heating Element, Push/ Screw type with ‘O’ ring including making electrical connection complete all as directed by the Engineer-in-Charge.

Taking down and Supply and Fixing 2 KW capacity Heating Element, Push/ Screw type with ‘O’ ring including making electrical connection complete all as directed by the Engineer-in-Charge.

Supply & Fix in replacement of Geyser assembly suitable for 25 ltr capacity ISI marked including dismantling of old unserviceable geyser assembly complete all as specified & directed.

Supply & replacement thermostate suitable for 25/50 Ltr Geyser ISI marked complete all as specified & directed.

Supply & replacement PVC connection heavy duty 15mm dia 45 cm long with PTMT nutscomplete all as specified & directed.

Supply & replacement pressure release valve suitable for 25/50 Ltr capacity geyser complete all as specified & directed.

Taking down unserviceable Fresh Air fan and S&F PVC fresh air fan of 250 mm sweep in toilets compete with louvers including all civil work like cutting and making opening in existing wall of toilet etc , including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make:CG/Bajaj/Havells.

Dismantling of ceiling fans AC single phase 230 volts of sizes 1200mm/1400mm (collected from MES fan store ) any make / model except old vintage, dismantled its stator,rotor, cutting out burnt copper winding and providing new winding with super enamelled copper winding wire existing size including cleaning of slots providing oil impregnated insulation paper or minimax, fibre, insulation in slots and well wraping with cotton tape, bind with cotton thread and varnishing over all with winding varnish as aproved by Engineer - In - chargee cleaning of bearing housing and shaft, replacing spares such as split pins, blade screws etc as required all as specified and directed by Engineer -In - charge

All as per item no.67.00 above but for exhaust fan of following sizes :-

(a) 400/450mm sweep AC single phase 230/240 volts

(b) 300/380mm sweep - do-

(c) 230/250mm sweep - do-

All as per item No 67.00 above but for wall fan/padestal fan of any sweep and capacity

S&F condenser carrier clip (PVC) in build connector two way fixed with screw on down rod or housing complete all as specified and directed.

S&F upper set of clips for down rod with rubber Bush (Garari) including set of nut bolts and washer, pin complete all as specified and directed.

S&F rubber bush ( Garari ) for mounted at upper side of down rod clip all as specified and directed

S&F gun metal bush self lubricated, any size ,suitable for ceiling and wall fans complete all as specified and directed

S&F flexible copper conductor stranded 1100 Volt PVC insulated cable twin core twisted 23/0.0076 Sq mm size, complete all as specified and directed.

S&F Fan condenser, 230 Volts of the following sizes :-

S&F ball bearing of following sizes :-

(a) NBC/ SKF - 6201'ZZ' (set of two)

(b) NBC/ SKF - 6202'ZZ' (set of two)

(c) NBC/ SKF - 6203'ZZ' (set of two)

(d) NBC/ SKF - 6204'ZZ' (set of two)

Taking down ceiling fan/wall fan from fan hook and disconnection from ceiling rose and dismantling of ceiling parts i e. down rod and connector/condenser nut bolts, split pins, rubber bush (garari) condenser carrier clip (PVC) in build connector two way complete servicing by cleaning greasing/oiling before in side surface by CTC with sand paper including Painting with existing colour and re - fitted the same position and testing complete all as specified and directed on site.

Taking down Exhaust fan any type and disconnection from ceiling rose and dismantling i.e connector/condenser nut bolts, condenser carrier clip (PVC) in build connector two way complete servicing by cleaning greasing/oiling before in side surface by CTC with sand paper and repair and re - fitted the same position and testing complete all as specified and directed on site (Note: - condenser, condenser carrier clip (PVC) in build connector two way shall be measured and paid separately

Supply and replacement down rod for ceiling fans duly painted with synthetic enameled paint 300 mm long19 mm outer dia with holes on both ends of the rod for connection wire replacement complete.

Supply and replacement down rod for ceiling fans duly painted with synthetic enameled paint 600 mm long19 mm outer dia with holes on both ends of the rod for connection wire replacement complete.

Supply and replacement Exhaust fan blade duly painted suitable for 450 mm/380mm sweep complete all as directed .

Supply and replacement Exhaust fan blade duly painted suitable for 300 mm/230 mm sweep complete all as directed .

S&F in replacement of fan blade suitable for 1200mm sweep ceiling fan complete similar to original make with new screws Complete all as specified and directed by Engr-in-Charge.

Supply and replacement outer frame complete with clamps, rubber packing, nut bolts etc & all accessories duly painted suitable for 450 mm /380 mm sweep exhaust fans complete all as directed .

Painting of ceiling fan with two coat synthatic enamel paint after surface preparation including Writing/making of MES No size of letters not less than 2.0 CM high and not more than 50 alphabets as approved colour as directed.

Dismantling of cabin fan of any sweep and overhauling complete by means of cleaning of stator, oiling & greasing including replacement of nut and bolt etc and reassembling the same and testing complete all as specification and directed by Engr-in-Charge .

Dismantling of cabin fan of any sweep and rewinding the stator with super enameled copper winding wire of suitable size including greasing, cleaning of all components of fan reassembling , testing, commission complete all as specification and directed by Engr-in- Charge.

Removing unserviceable bearing shaft welding broken area and threading in lathemachine at appropriate size and refixing in ceiling fan any type complete all as specified and directed.

Supply and fixing in replacement post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

Supply and fixing in replacement post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

Supply and fixing in replacement LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size

Supply and fixing in replacement LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size

Supply and Fixing in replacement of 100 Watt Flameproof cum Waterproof LED Bulk Head light fitting of 15W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable.

M/s Pooja Enterprises (BID ID -3254933)

A. R. ELECTRICALS (BID ID -3254581)

M/s Power Engineering Co (BID ID -3254338)

ICON AGENCIES (BID ID -3254763)