EDCH-71/2025-26

Safe Carriage of following material from Electricty store center Hts to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)

Pcc Pole 8.5/9 Mtr. Long

STP Pole 9/11/13 Mtr. Long

Teeoff Channel with N&B

Earthing set complete

V type X arm

Pin Insulator with Pin

Disc Insulator with fitting

LT XLPE/PVC Cable

AB Cable

ACSR Dog Conductor

XLPE Cable

Cable Jointing Kit

Guarding Angle

G.I Wire

MS Dropper Channel

Ms Top Channel

Stay set Complete

250 KVA 11/0.4 KV T/F

Distribution Box

F Bracket

Fuse Set

Errection of following Poles with grouting including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Pcc Pole 8.5/9 Mtr. Long

STP Pole 9/11/13 Mtr. Long

Fixing/ Errection of following item, cost of labor, material and T&P which required for completion of work

Teeoff Channel with N&B

Pin Insulator with Pin

Disc Insulator with fitting

V type X arm

MS Dropper Channel

Ms Top Channel

Ms Angle T/F Base

Fuse Set

Cable Jointing Kit

Distribution Box

F Bracket

Installation of 250 kva T/F in proper alignment direction & making HT/LT connection.

Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer.

Laying, sagging and stringing and jumpering/binding etc. in 33 KV/11 KV / LT lines as per RESPO manual and as per direction of supervising engineer.

LT XLPE/PVC Cable

AB Cable

11 kv XLPE Cable

ACSR Dog Conductor

Providing & Fixing of AL Lug

Providing & Fixing of ACSR Weasel Conductor

Providing & Fixing of Copper L Piece

Providing & Fixing of Eye & J Hook

Providing & Fixing of Barbed Wire

Providing & Fixing of Red Oxide Paint

Providing & Fixing of Aluminium Paint

Providing & Fixing of PG Clamp

Providing & Fixing of Suspension Clamp

Providing & Fixing of Dead End Clamp

Providing & Fixing of Pearcing Connector

Providing & Fixing of Nut,Bolt & washer

Providing & Fixing of Danger Board

Providing & Fixing of LT Tailless Unit

Providing & Fixing of Different Type of Clamp

Plinth of Round Pole

Re Guarding / Guarding of 11 KV line by laying, stringing, sagging and binding of 2 Nos. parallel GI wire 6 SWG after providing, fabrication and fixing of guarding angle and fabrication and fixing of X-guards (Tillis) of GI wire at distance of 3 Mtr.

Construction of plinth of size 2*2*1.5 mtr above ground level one ft below the ground level of 9" After Exavation of 4 "earth brick ballast shall be provided and rammering will be done properly After ballast shall be provided and rammering will be done properly After that a retaining wall 9"width by fist class brick in ratio 1:4 of cement & sand shall be made . The earth shall be filled up to one ft.below the top of the plinth After this brick ballast shall be provided upto 6"from the earth level and proper rammering shall be done one No. jall of 12 mm MS tor shall be fixed in the hollow of plinth and one ft. thick RCC in ratio of cement sand & stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand.

Earthing of 250 KVA medium Power Transformers

Net Fencing of 250 KVA medium Power Transformers