ADDN/ALTN TO BLDG NO P-451 AND P-469 AT 35 INF BDE AND OTHER MISC SANCTIONED WORK UNDER AGE B/R-II OF GE (SOUTH) DELHI CANTT-10.

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. of any description complete all as specified and as directed.

M&L for providing cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, mass concrete and filiings complete all as specified and as directed.

M&L for brick work with sub class B old size burnt bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks strainght or curved on plan to any radius in half thick in cement mortar 1:4 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 8 to 9 mm thick (square/ rectangular) polished, area of each tile not exceeding 1.44 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 8 to 9 mm thick (square/rectangular) polished, (piece cut from the same tile shade/colour as fixed in floor) in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including backing coat/ plaster 10 mm thick on fair faces of brick work in cement mortar 1:4 surfaces to receive tiles complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and as directed.

M&L for joint free glazed ceramic coloured tiles in vertical surface, area of each tile exc 0.06 Sqm but n.exc 0.18 Sqm each set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat/ plaster 10 mm thick on fair faces of brick work in cement mortar 1:4 surfaces to receive tiles complete all as specified and as directed.

Dismantling stone slabs and tiles of any discription or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for granite (of any type) work, 16-18 mm thk (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms over and including 20mm thick screed bed cement screed bed in cement mortar 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding edges of granite slabcomplete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4type B-1 (using 20 mm graded crushed stone aggregate) as in fins, fascias, louvres, parapets, and railings, newels, balustrade, and the like complete all as specified and as directed.

S&F TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars complete all as specified and as directed.

S&F TMT bars 8 mm dia in spacers, cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia.

M&L for form work to side of columns and simillar work complete all as specified and directed.

M&L Formwork wall amd to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work etc. complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for 15mm thick rendering with ready mix plaster on faces of brick or concrete surface, finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for 10mm thick rendering with ready mix plaster on concrete surfaces of ceiling, chajja,etc finished even and smooth complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying 1 to 2 mm thick wall care putty on whole surfaces to achieve smooth, even and uniform surface including grinding with sand paper and levelling of surface and applying two coat of oil bound distemper on white or tinted over existing prepared putty base surface complete all as specified and as directed.

M&L for preparation of newly plasered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of the newly plastered surfaces of walls/ ceiling and M&L applying two coats of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6 sqm/ltr with Graco-490 spray machine over one coat of primer with and including 1mm thick wall care putty to prepare the surface even and smooth complete all as specified and as directed.

M&L for complete removal of existing treatment from internal surfaces of wall by electrically operated grinder, washing and filling of holes with filler material and applying 1 to 2 mm thick wall care putty in two layers on whole wall surface including grinding with sand paper and levelling the surface and than applying two coats of oil bound distemper on white or tinted surface over existing prepared putty based surface complete all as specified and as directed..

M&L for complete removal of existing treatment from from external surfaces of walls by electrically operated grinder, washing and filling of holes with filler material and applying 1-2mm thick cement base wall care putty on the whole surface to achieve smooth, even & uniform surface including grinding with sand paper and levelling of surface and applying two coats of acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm (d) Cost of all above aspects shall be deemed to be included in quoted rate of the contractor complete all as specified and as directed. Notes : (a) All works shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufacture shall have valid authrisation letter from the manufacturer (minimum regional HQs) issued not earlier than 30 days from start date of the said finishing work. (c) The contractor shall provide application for testing and certification of finishes by paint manufacturing firm/ their authorised applicator. (d) Cost of all above aspects shall be deemed to be included in quoted rate of the contractor.

M&L for preparation of old surface of ceiling and applying one coat of white wash complete all as specified and as directed.

Dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres, complete all as specified and as directed.

S&F 500 ltr capacity rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball ascrewed for iron pipe of 20mm bore and fixed complete all as specified and as directed.

S&F in repairs gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections of 15 mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections of 20 mm bore of pipe complete all as specified and as directed.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed complete all as specified and as directed.

S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed complete all as specified and as directed.

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S&F PVC connections 450 mm long with brass unions at both ends suitable for 15mm bore pipe complete all as specified and as directed.

S&F sink mixer for mixing valve 15mm dia wall mounted with 165mm long swivel spout, connecting legs and wall flanges, Hot and Cold CP brass fancy including joints to steel pipe or unions , including fittings complete all as specified and as directed.

S&F Single or double leaver central hole mixer for mixing with 450mm braided connection pipe 15mm dia, Hot and Cold CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin , including fittings complete all as specified and as directed.

S&F wall mixer with bend pipe for overhead shower mixing valve Hot and Cold water Screwed Down for iron pipe 15mm dia CP brass fancy including joints to steel pipe or unions , including fittings for complete all as specified and as directed.

S&F two way Chromimum plated bib cock 15 mm dia with single handle and wall flange complete all as specified and as directed.

S&F CP health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15 mm bore pipe complete all as specified and as directed.

S&F in repairs Brass chromium plated shower rose 120 mm size with arm complete all as specified and as directed.

S&F stainless steel towel Rack fixed with sutable screw complete all as specified and as directed.

S&F in repair 15 mm angle valve/ stop valves, cast copper alloy , chromium palted, fancy type screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union complete all as specified and as directed.

S&F in repairs bib tap (quarter turn), brass chromium plated fancy type, long body with flange screwed down, screwed for iron pipe 15 mm bore complete all as specified and as directed.

S&F in repairs elbow action pillar tap 15 mm dia with 160 to 180mm long lever, chromium plated brass including joints to steel pipe or unions for centre hole wash hand basin, including fittings complete all as specified and as directed.

S&F in repairs pillar tap 15 mm dia, CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin, including fittings complete all as specified and as directed.

S&F in repairs grating doom 125mm dia with waste hole of PTMT (minimum weight 40 gms) etc. complete all as specified and as directed.

S&F in repairs brass chromium plated overhead shower rose 125mm dia, with revolving joint and shower rod to fixed to 15mm bore pipe complete all as specified and as directed.

S&F brass chromium plated tubular towel rail, 20mm dia, 'D' type 60cm long between flanges of brass CP complete all as specified and as directed.

S&F kitchen plate rack with four shelves made out of stainless steel sheet 1 mm thick overall size 750mm x 750mm x 250mm complete all as specified and as directed.

S&F in repair stainless steel sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) , white fixed in repair,including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device complete all as specified and as directed.

S&F in repair, PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level complete all as specified and as directed.

S&F in repair vitreous china counter top wash hand basin, white, size as mentioned against each make including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets complete all as specified and as directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutter of any descreption exc. 1.00 sqm but not exc. 2.00 sqm each complete all as specified and as directed.

S&F factory made solid PVC chowkhat/ door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed PVC sheet reinforced with 19 mm x 19mm MS square tube of 19 gauge including rubber gasket, PVC fastners, screws, brackets, and shown on drawing as per SSR part-II (2020) complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain printed moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F 35 mm thick Factory made IInd class hardwood plain, framed paneled shutters (any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003 (part) Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 35 mm thick factory made IInd class hard wood glazed and Skelton shutters (three panels) open rebated and prepared to receive glass/ gauge etc. divided into squares edges of framing plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/ gauge etc. size of members of shutters complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.63mm nominal dia or wire and sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/steel windows complete all as specified and as directed.

S&F stainless steel butt hinges, size 100 mm complete complete all as specified and as directed.

S&F stainless steel barrel tower bolts, 150 mm long complete all as specified and as directed.

S&F stainless steel handles, 150 mm long complete all as specified and as directed.

S&F stainless steel sliding door bolts 250mm long with hasp, staple (bolt type) fixing clips of sheet cast, fixing bolts complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed.

M&L for 18mm thick coloured wood plastic composites (WPC) board, fixed with screws as in cupboard/ wardrobe/ almirah shutter including all necessary fittings and fixtures like nickle plated clip hinges, knobs etc complete all as specified and as directed. Note: (a) Pattern & design of WPC board to be decided by GE. (b) Items like cupboard knobs, and CP plate clip hinges deemed to be included in the quoted rate.

S&F drapery curtain rods, stainless steel 25 mm dia of approved quality with decorative wooden finish and two number brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod including 8 Nos (min) match up rings etc. complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm longand expansion hold fasteners 12.5mm dia. 40mm long and including Powder coated anodised aluminium snap grid frame size 605 x 605 mm and 2-3 mm thick for false ceiling complete all as specified and as directed.

S&F acoustic gypsum perforated board 12 mm thick of size 600x600 mm fixed in ceiling or laid/ inserted to Aluminium snap grid complete all as specified and as directed .

S&F in repair PVC hollow false ceiling interlocking type 5-7mm thick plain/ coloured, fitted with MS hollow grid (light weight) section 25mmx25mmx1mm thick including fillets on joints, with hanging arrangements and including maintain levels with adjustable clips, complete all as specified complete all as specified and as directed. Note:- If any minor electricial fittings and fixtures disturbed their-in will be match and fixed as existing.

S&F in repair ACP Cladding (Aluminium Composite Panel) 4mm thick exterior grade for cladding (The minimum thickness of the upper and lower aluminum plates is not less than 0.50 mm) including necessary fixing arrangements with MS framed structure, visible Joint of ACP to be filled with non staining silicon sealant (Note :- MS brackets shall be finished with two coats of synthetic enamel paint of approved shade over one coat of zinc chromate primer) complete all as specified and as directed.

S&F Solid PVC wall lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and as directed.

S&F aluminium door powder coated of extrusion aluminium section, Vertical style of door shutter of size 85mmx44.45mmx1.8mm thick. Top, middle and bottom rail of size 85mmx44.45x1.8mm thick and fixing 5 mm thick plain/tinted sheet glass of Modi guard/Atul or prelaminated particle board 9 to 10mm thick of make Kit Ply with aluminium beading and rubber gasket/beading as directed One mortice lock for aluminium door (each) and two aluminium tower bolts of 200mm size for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces including taking down existing door and making good edges/soffit/cills with CM 1:6 to fix new door complete all as specified and as directed. Note : Including Cost of sheet glass Plain/frosted/particle board shall be measured and paid seprately.

S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mm x 44.45mm x 1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminum snap beads complete all as specified and as directed.

S& F roller blind curtain/ Canvas including all aceesories required to make it functional complete all as specified and as directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to distance n.exc 50m and making good surface in soft/loose soil complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep in soft/ loose soil and getting out including clearing all grass vegetation, saplings, shrubs, brush woods under growth roots and trees exceeding 30 cm girth, complete all as specified and as directed.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and as directed.

Removing excavated material exc 250 m but not exc 500 m and depositing where directed as in soils complete all as specified and as directed.

M&L cement concrete type D2, 1:4:8, using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and as directed.

M&L cement concrete type B2, 1:2:4, using 20mm graded aggregate in foundations, filling and mass concrete complete all as specified and as directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as inroof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tube conforming to IS 1161-1979 grade St-240 complete all as specified and as directed.

S&F for 11 to 15 mm mild steel screws bolts (machine made) with hexagonal or square heads at one end and screws both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm not exc 10 cm long complete all as specified and as directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plate, riveting, etc n.exc 10 kg each brackets, conforming to Fe-290. Gde E-165 complete all as specified and as directed.

M & L for preparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M& L for moorum/red bajri Spreading and levelling in layers n exc 25 cm thick, well ramming including watering and consolidation complete all as specified and as directed.

M&L for hard core (stone aggregate) of gauge not exc 63mm deposited spread and leveled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L for Cement concrete 100mm thick type C-2, 1:3:6, using 40mm graded aggregate as in base of floor complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size,with grey cement and colour pigment to match the colour of tiles, confirming to IS 15658-2006 of 60mm thick M-35 grade laid over and including 50 mm thick sand cushioning complete all as specified and as directed.

M & L for machine pressed precast concrete interlocking paver block any shape, size and colour,with grey cement and colour pigment to match the colour of tiles, confirming to IS 15658-2006 of 80 mm thick M-40 grade complete all as specified and as directed.

M&L for 40mm thick sand cushion under interlocking paver block complete all as specified and as directed.

Material and labour for pre-cast cement concrete type B1 1:2:4, using 20mm graded aggregate as in kerb stone (factory made) on road and path including exavating in line n.exc 20cm in width and 30cm deep with 50mm thick PCC 1:4:8 in sub base of exavated area lay/fix the curve stone over PCC and packing the same duly retuning filling and pointing the gaps between curve stones with grey cement complete all as specified and as directed.

M & L for cement concrete 1:3:6 type C-1 1:3:6, using using 20mm graded stone aggregate as in coping, roof kerbs or mud stops; rounded or chamfered on edges complete all as specified and as directed.

M&L for preparation of new or previously untreated plastered or concrete surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paintover a coat of primer complete all as specified and as directed.

M&L for providing reinforcement cement concrete 1:1.5:3 (Nominal Mix) as in columns and pillars etc complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 without using extra cement complete all as specifed and as directed.

M&L for preparation of new plaster surfaces apply two coat of cement base paint over a coat of primer complete all as specified and as directed.

Notes :- (i) The contract sum shall be after deducting the amount of Credit shown in Sch of Credit of this Tender. (ii) If any item of same description in nature is found to be entered as "double in BOQ" and the bidder quotes different rates against same item, then the rate quoted on lower side shall be applicable and higher rate will not be allowed to be paid in any circumstances. No claims on this account shall be entertained on a later date.

P R Constructions (BID ID -3272325)

Baljeet Builders & Interior Decorators (BID ID -3267532)

Kunal Construction Co. (BID ID -3267028)