SPECIAL REPAIRS TO ROOF OF BUILDING NO IP 03 JCOS CLUB OF ARTY STATIC WKSP, EME DEVLALI AND SPECIAL REPAIRS TO ROOFING/WATER PROOFING TREATMENT OF BLDG NO. P569 APPROX 1663 SQM OF 213 MED REGT UNDER THE AOR OF GE DEOLALI

Amount

Dismantling of Single layer Mangalore pattern or similar tiles in roofing complete all as specified.

Dismantling of battens for tiles, singles etc, of any size including tiling fillets exc 15 cm complete all as specified.

S&F Steel work in tubular/Hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St. - 240. complete all as specified and directed.

Dismantling of timber scantling framed work 40sqcm and over in section in any position all as specified and directed.

M & L for Clean sawn 2 nd class hard wood in scantling as a post and rafter complete all as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

M & L for applying two coats of synthetic enamel paint of new steel surfaces over a coat of priming with red oxide over preparation of new surfaces.

M & L for Preparing surface of wood and wood based materials, new or old, of any descripion and girth, not otherwise described and treated with two coats of creosote complete all as specified.

Dismantling of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed.

S & F powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 38mm x 38mm x 1.5mm and cross Tee of size 38mm x 38mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm complete all as specified and as directed.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed.

Dismantling and refixing of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed.

Demolition of Brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar.

M&L for brick work with sub class B bricks, straight or curved on plan n.exc 6m mean radius in cm 1:6 using old size brick.

All as per item no - 15 but except bricks complete all as specified.

Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc.

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:4 finished even and smooth ( without using extra cement ).

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth ( without using extra cement ) with sagol finish on plastered surface complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat of primer over a coat of 1.5 thick wall care putty all as specified.

M & L preparing plastered or unplastered new surfaceand applying two coats of cement base paint over a coat of cement primer on new wall plastered surfaces.

Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified.

M & L for Cement concrete as 1:5:10 type E-2 (using 40mm graded stone aggregate) as foundations,filling and mass concrete complete all as specified.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping/hold fast bed blocks,bed plates,roof kerbs or mud stops, rounded or chamfered on edges or similar items including necessary form work stops moulds etc all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

M & L for 2 nd class hardwood as glazed and skeleton shutters 35 mm thk open rebated and prepared to receive glass, gauze, etc (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutter as specified in SSR Part l, section 8, clause 8.24 ( a ); supplied and fitted to chowkats complete all as specified and as directed.

S & F powder coated sliding window, two track shutters, with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, Chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 4 mm thick size of side rails , top rails , bottom rail 85x44.5mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member shall be 1.40mm thick complete all as specified in MES SSR, Part-I clause 10.37 all as specified and as directed.

S & F in Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples Complete all as specified.

S & F 35 mm thick second class hardwood plain,factory made framed, panelled shutters ( any number of panel ) with panels of timber flat on both sides (feather edged ) or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to choukats complete all as specified.

M & L for applying two coat of synthetic enamel paint of wooden surface over a coat of pink primer including preparation of new surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified.

Taking down chowkats or frames exc.1.5 sq.m but not exc. 4 sq.m each but with shutters ( without taking off shutters from the frame ) complete all as specified.

Taking down chowkats or frames n. exc.1.5 sq.m but with shutters ( without taking off shutters from the frame ) complete all as specified.

S & F Butt hinges, medium weight, stainless steel, and fixed 100 mm length complete all as specified.

S & F Aluminium handles, cast type, anodised handle 150 mm complete all as specified.

S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 150 mm complete all as specified.

S & F 300 mm long MS helical door spring, inclunding roller and roller plate complete complete all as specified.

S & F 300mm aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

M&L for preparing old decorative plastered surface of walls by removal of existing treatment on walls washing down and applying two coats of cement base paint and colour shade as approved by Engr- in- Charge , pista green )

M&L for preparing old decorative plastered surface of walls by removal of existing treatment washing down and applying two coats of distemper oil emulsion oover a coat of primer over one coats of care wall 1.5mm thk putty all as specified and directed by engr-in-charge.

M&L for preparation of old painted wooden surfaces over 10cm in width or girth and applying two coat of synthetic enamel paint all as specified and directed by engg-in charge.

M&L for preparation of old painted steel surfaces over 10cm width or girth and applying two coat of synthetic enamel paintall as specified and directed by engg-in charge.

M & L for Granite 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing types all as specified.

S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs complete all as specified.

S&F in repairs Stainless steel drapery rod of 20 mm inner dia (in lengths as directed) of & including decorative finial at both ends and pair of S S steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, (Victorian design)all as specified & as directed.

S&F framed work such as grills, gratings, etc with ends of bars, shouldered and /or riveted, or forged into spicks, framed guard bars, ladders, framed balusters, walk ways, railings, framework of water tankd and similar work conforming to Fe 410-O all as specified.

S & F Mild steel as hold fasts Fe.290.Gde-E-165 complete all as specified.

S&F PVC pipe 110 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and as directed.

M & L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.

S&F wall mounted stand Consisting of 16mm Dia powder coated MS Rods of CR Steel mounted MS square pipe for draying cloth size mount it 12-3roads ,4 Ft each weight 3.2 kg

Dismantling of water tanks (RCC hume Pipe/PVC) including disconnecting all connections etc. removing to store complete for following capacity of tanks 1000 ltrs capacity complete all as specified and directed

S&F 1000 ltrs capacity new rotational moulded polythylene water storage tank (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing in repairs PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed.

Dismantling of water tanks (RCC hume Pipe/PVC) including disconnecting all connections etc. removing to store complete for following capacity of tanks 3000 ltr capacity complete all as specified and directed

S&F 3000 ltrs new rotational moulded polythylene water storage tank (cylindrical/vertical with closte top) hoisted and fixed in position complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tanks 3000 ltrs.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Fixing only 25mm bore tubes, any grade, to walls and ceilings or laying in floors

Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors

S&F 25mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F in repairs 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repairs 25mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

Taking down carefully existing unserviceable bitumen felt/ APP membrane (any number of layers) including plaster of any thickness etc and removing of the rubbish to a distance not exceeding 500m from the building and depositing where directed .

M&L for rendering 10mm thick CM (1:4) on roof slab top and sides finished even and smooth without using extra cement, mixed with water proofing liquid complete all as specified. Note: Water Proofing liquid shall be measured and paid separately.

M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) for filleting, benching,coving of chajjah top/junctions, padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work/moulds etc including applying cement slurry on surface area @2.50 Kg/Sqm complete all as specified and as directed .

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sqm. ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturer's. iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesible roof surfaces complete all as per manufacturer's instructions and as directed .

S&F in repairs PVC tank Cover for OHT of 3000 Ltr Tank capacity complete all as specified and directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams staircases, landing, chajjas, old RCC tank and similar suspended work.

M&L for RCC (nominal mix) Type B1 1:2:4 (using 20 mm graded stone aggregate) in chajjas.

Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat rough finished surfaces of concrete

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item No. 73 above but 6mm to 8mm dia.

Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge.

S&F in repairs ball valve high pressure of PTMT with epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete.( 210 gms weight ) complete all as specified.

Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.

S&F for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

Taking down unserviceable carefully copper/aluminium point wiring (light, fan, socket or power) complete with teak wood battens including fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc. but excluding fan regulators, tube light fittings and sketch fittings and making good disturbed surfaces of walls, floor etc.complete all as directed.

Material and labour for point wiring with stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for the following:-

One Light point controlled by one switch

One fan point controlled by one switch

One 5 pin socket outlet. 5 Amps on the same board.

One 5 pin socket outlet. 5 Amps on the independent. board

All as item No- 82 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specied .

Supply and fix switch socket combination 3 pin 5 Amps flush type (multi purpose ) complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and as directed.

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S & F lamp angle/batten holder Bakelite complete all as specified and as directed.

S&F in replacement LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCA sheet with snap on installer sutable for double side connection LED tube in and including batten and tube etc complete in all respect.

Supply and fix in replacement fan regulator 100 watts electronic type for ceiling fan of size 900 mm to 1400 mm sweep working on 230 Volts AC supply with all necessary connections etc complete all as specified and as directed.

Supply and fix in repairs sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus bars double door complete all as specified and as directed of following sizes:-

S&F for power line sheet metal enclosure double door surface mounting distribution board suitable for MCCB SKB 5/6/7 as incomerl for 415 Volts 4 way with 200 Amps bus bar ( without MCCB & MCB)

S&F for MCCB TPN 100 Amps, 30KA, 440V 50Hz,

Supply and fix in replacement MCB SP 6 to 32 Amps, 240 volts complete all as specified and as directed.

Supply and fix in replacement MCB SPN 32 Amps, 240 volts complete all as specified and as directed. M

M & L for replacement of sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLS cable 1100 Volts grade incl 4.0 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLS as continuous earth wire and connecting to common earth terminals complete all as specified and directed in Existing conduits/ PVC capping- casing. Note :-(i) Two run of copper cable and one run of earth wire shall be measured as one length. (ii) If Casing- capping required at site, they will be measured and paid under respective items

Ditto all as per item No - 96 above but with 2 runs of 4 Sqmm cable with one run of 2.5 Sqmm cable for earthing.

S & F in repairs Plug & socket enclosure in sheet metal enclosure with 20A SP MCB complete all as specified and as directed.

S&F LED Bldg Security light Endura Pearl having long life versalite pressure die-cast aluminium housing with high power LED as Lighting source and lens embedded PC Cover having top opening seperate driver compartment with IP66 and impact resisitance of IK 07 roadway luminaries with high power 25 W LED as light source with acrylic cover

M & L for bracket made out of GI tubing 40 mm dia,light grade 1.0 mtr long including fixing with MS clamps -2 Nos made out of 50 mm wide 5mm thick flat iron with M.S. nuts, bolts 75 mm long 12 mm dia -4 Nos & flat washer (3mm thick) 01 No. for each including preparation of steel surfaces and painting with two coats of aluminium paint over one coat of red oxide to the M.S clamps & bracket etc complete all as specified and as directed.

S & F Decorative wall light fixture with 9 watt LED lamp made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base.

Taking down care fully ceiling fans 1200 mm to 1400 mm sweep, keeping in safe custody painting with 2 coats of white enameled paint & refixing the same after completion of B/R work all as specified and as directed( Note: minor accessories like capacitors, flexible wire , connector & hanging clamps with rubber bush and 02 Nos nut and bolts is deemed to be included in rate quoted)

M&L for renewal of earthing of poles,system with galvanised steel earth plate electrode of size 600 x 600 x 6mm thick buride vertically in ground not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground leveland conected to GI wire 4 mm by means of nuts,bolts and washers and encased in and including 40mm dia GI light grade pipe upto 2.4 mtr height from ground level fixed by MS flat iron clamp 40mm x 5mm with nut,bolt and washers ,GI wire fixed to base along pole and connected to existing system with alternate layer of charcoal dust ,salt packed around plate 150mm thick including watering GI pipe ,light grade 20 mm dia 1.5 mtr long fixed to funnel with wire mesh complete with PCC chamber and RCC chamber cover all as per electrical plate NO3 of SSR Part-1 -2009 including excavation and earth work in any type of starta and testing on completion.(Note:-GI wire and GI pipe beyond 7.5mtr long shall be measured and paid separately.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circula 10 sqmm

Note: Amount of sch of credit of Rs.39685/-will be deducted from total amount of BOQ.

Alpha Construction

M/S R.K.S. CONSTRUCTION

Vinod Enterprises

M/S SAMEER SUBHASH PATANI

J Sams Contructions

M/S SUJAL ENTERPRISES