RMO various Roads in Shahdara Distt. under the Jurisdiction of M-251, (North East and Shahdara Electrical Division)PWD Delhi during 20-21, (SH- Providing illumination for dark points as per Women Safety Audit Delhi.)

Amount

Fabrication, Supply and erection of flange mounted hot dip Galvanized Octagonal Poles of 12 mtrs. Height made from 3 mm thick HT Steel plate, having bottom dia of 210 mm. & top dia of 90 mm. Complete with window with flash cover at a height of 2.5 mtrs from the base for cable termination block etc. and galvanized base plate of size 310mm x 310mm x 20mm thick on existing cement concrete pedestal as required I/c supplying and fixing of the following in the window box providing for cable termination:- a)Fabrication, Supply and fixing 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. G.I strips 3mm thick of suitable length and having 10 nos. suitable size tapped holes as reqd. b) Supplying and fixing of 63 Amp termination block suitable links -5 nos. On DIN channel I/c pdg. and fixing DIN channel of suitable length - 2 nos. on the existing laminated sheet. c.)Supplying and fixing 6 Amp 10 KA, SPMCB,'C' Characteristics Curve - 1 nos. Earth stud 1Nos. Welded at suitable height two nos. washers, springs & nuts i/ c foundation bolt M 24x 580mm (j type)

Fabrication, Supply and erection of flange mounted hot dip Galvanized Octagonal Poles of 10 mtrs. Height made from 3 mm thick HT Steel plate, having bottom dia of 175 mm. & top dia of 70 mm. Complete with window with flash cover at a height of 2 mtrs from the base for cable termination block etc. and galvanized base plate of size 275mm x 275mm x 20mm thick on existing cement concrete pedestal as required I/c supplying and fixing of the following in the window box providing for cable termination: - a) Fabrication, Supply and fixing 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. G.I strips 3mm thick of suitable length and having 10 nos. suitable size tapped holes as reqd. b) Supplying and fixing of 63 Amp termination block suitable links -5 nos. On DIN channel I/c pdg. and fixing DIN channel of suitable length - 2 nos. on the existing laminated sheet. c) Supplying and fixing 6 Amp 10 KA, SPMCB,'C' Characteristics Curve - 1 nos. Earth stud 1Nos. Welded at suitable height two nos. washers, springs & nuts i/c foundation bolt M 24 x 750mm (J type )

Fabrication, Supply and erection of flange mounted hot dip Galvanized Octagonal Poles of 8 mtrs. height made from 4 mm thick HT Steel plate, having bottom dia of 135 mm. & top dia of 70 mm complete with window with flash cover at a height of 0.5 mtrs from the base for cable termination block etc. and galvanized base plate of size 240mm x 240mm x 16mm thick on existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box providing for cable termination: - a) Supplying and fixing 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. G.I strips 4mm thick of suitable length and having 10 nos. suitable size tapped holes as reqd. b) Supplying and fixing of 63 Amp termination block suitable links -5 nos. On DIN channel I/c pdg. and fixing DIN channel of suitable length - 2 nos. on the existing laminated sheet. c) Supplying and fixing 6 Amp 10 KA, SPMCB,'C' Characteristics Curve - 1 nos. Earth stud 1Nos. Welded at suitable height two nos. washers, springs & nuts.

Providing and laying in position M-24 reinforced cement concrete foundation of size 750 mm (L) x 750 mm (W) and 1800 mm (D) i/c excavation of earth, providing cutting, bending and placing in position, reinforcement TMT bars of 12 mm dia -1960 mm long (approx)-8 nos. and reinforcement ring of cold twisted bar of 8 mm dia - 2800 mm (approx) - 10 nos.(with 150 mm spacing) as required with positioning of foundation bolts (as per item below and) and providing 90 mm (O.D.) DWC, HPDE pipe for cable entry and exit as reqd.

Providing and laying in position M-20 (1:2:4) reinforced cement concrete foundation of size 600 mm (L) x 600 mm (W) and 1500 mm (D) i/c excavation of earth, providing cutting, bending and placing in position, reinforcement TMT bars of 12 mm dia -1600 mm long (approx)-8 nos. and reinforcement ring of cold twisted bar of 8 mm dia - 2800 mm (approx) - 10 nos.(with 150 mm spacing) as required with positioning of foundation bolts (as per item below and) and providing 90 mm (O.D.) DWC, HPDE pipe for cable entry and exit as reqd.

Dismentaling of existing RCC Foundation i/c excavation of earth and take out from the site and Dispose at different location away from the site etc as required

Fabrication, supplying & fixing single/double galvanized arm bracket of suitable length and dia on the existing pole i/c tightening bolts etc. as reqd.

Replacement of existing old fitting by providing energy efficient LED Street light fitting Luminaries of rating 200 watts made with high pressure die cast aluminium housing with powder coated with lens, IP 66, suitable for operation on 150 to 265V single phase A.C. supply, having system efficiency 125 luman per watt. or more and colour temperature of 5500 K to 6000 K, CRI >70 with driver having power factor > 0.95, THD < 10% and efficiency > 85% potted driver should be IC Compliance, with minimum 10 KV surge protection, LED life shall be not less than 50000 burning hours, complete etc. including connection testing & commissioning i/c dismantling of existing fitting in good condition and deposit at JE store etc. complete as required.

Replacement of existing old fitting by providing energy efficient LED Street light fitting Luminaries of rating 120 watts or more made with high pressure die cast aluminium housing with powder coated with lens, IP 66, suitable for operation on 150 to 265V single phase A.C. supply, having system efficiency 125 luman per watt. or more and colour temperature of 5500 K to 6000 K, CRI >70 with driver having power factor > 0.95, THD < 10% and efficiency > 85% potted driver should be IC Compliance, with minimum 10 KV surge protection, LED life shall be not less than 50000 burning hours, complete etc. including connection testing & commissioning i/c dismantling of existing fitting in good condition and deposit at JE store etc. complete as required

Replacement of existing old fitting by providing energy efficient LED Street light fitting Luminaries of rating 70 watts or more made with high pressure die cast aluminium housing with powder coated with lens, IP 66, suitable for operation on 150 to 265V single phase A.C. supply, having system efficiency 125 luman per watt. or more and colour temperature of 5500 K to 6000 K, CRI >70 with driver having power factor > 0.95, THD < 10% and efficiency > 85% potted driver should be IC Compliance, with minimum 10 KV surge protection, LED life shall be not less than 50000 burning hours, complete etc. including connection testing & commissioning i/c dismantling of existing fitting in good condition and deposit at JE store etc. complete as required.

Providing, boring and laying HDPE pipe of 125mm O.D. conforming to IS:4984 - 1995 with pressure rating of 4Kg/Sq.c.m by trenchless technology with no dig method by making bore hole in horizontal direction across the road as per direction of Engineer-in-charge with moling equipment i/c jointing cleaning, roding of pipe, providing, suitable covers on mouth of pipe, excavation of pits of required size at a depth of 1.30 mtrs. to 2.00 mtrs i/c refilling etc. as reqd.

Fabrication, supplying installation testing and commissioning of outdoor type cubical feeder pillar of suitable size not less than 1 mtr. x 1.2 mtr. x 400 mm deep made out of M.S sheet 2 mm thick (14 SWG) duly compartmentalized having 4 strip aluminium bus bar of 200 amp capacity front openable double door with locking arrangement (2 nos. Godown locks in front ), provision for protection from rain, dust, fixed on M.S. angle iron frame work of size 50 mm x 50 mm x 6 mm (NS) 90 cm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement 2 sand: 4 stone aggregate 20) and having following accessories mounted inside the cubical panel i/c connection, inter connection with copper lead / strip with thimbles, earthing with two nos. earth studs duly powder coated with seven tank process approved colour complete etc. as reqd i/c supplying & fixing of following accessories including connection, testing etc. as read. a) 100 Amp. 25 KA MCCB 4 pole (ICS =100% ICU) with thermal magnetic release - 1 No. b 63 Amp. 18 KA MCCB - 2 pole - 4 Nos. (With 100 Amp frame size) .................. CONTINUE ......................

Supply & laying of following DWC pipe having corrugation of the outer wall & plain surface on inner wall as per IS code complete with necessary accessories for protection of 1.1 KV grade underground cable directly in ground in soft soil / existing CC at a depth of 50 cm i/c excavation & refilling the trench making good the same etc as required. a) 90 mm (OD) nominal size

Supplying and Laying of XLPE ISI Marked, Aluminium conductor armoured cable in the existing pipe as reqd. a) 4 x 25 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. Mm

Earthing with GI earth pipe 4.5mtr long x 40mm dia including accessories & providing masonary enclosure with cover plate having locking arrangement with salt & charcoal etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. along with cable.

Supplying and drawing 3x2.5 sq.mm PVC insulated copper conducter multi core cable in the existing poles & brackets from cable termination connector to the fittings i/c providing suitable lugs connections etc. as required.

A K Electric Works

Uday Raj Pandey

Krishna Electreical Works

jaglan construction

SEHRA ELECTRIC WORKS

Shaka Electrical (India)

SONA ENGINEERS

M/s Rahul Associates