Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹7,100
Closing Date
13 Jul 2026, 3:00 pm6d left
EE(E AND M) M-6
EE(E AND M) M-6
Renovation of EANDM equipment for maintenance work at Gali Magazine Chooriwallan tube well, Havelli Kallu Khawas Near H.No. 1370 Chitli Qabar tube well under Matia Mahal Constituency in AC-21
2026_DJB_294908_13
NIT NO-08 (2026-2027)
Open Tender
Miscellaneous Works
30 days
EE(E AND M) M-6
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
THROUGH DJB OFFICIAL WEBSITE IN LINK TENDER
₹7,100
Yes
6 Jul 2026
6 Jul 2026
13 Jul 2026
6 Jul 2026
13 Jul 2026
6 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Supply of Automatic LT Panel Board suitable for 415 Volts, 3 Phase, 50 HZ, 4 wire system for operation of up to 15 HP submersible set, made out of not less than 2 mm thick CRCA for load bearing members and 1.6 mm for doors of panel, Totally enclosed, dust and vermin proof, floor mounted type. The panel size 760 mmX 1360 mm X300 mm and having (1) 63 amp change over- 1 No (2) 63 A TPN MCCB -1 No (3) Amp meter 0-50 A- 1 No (4) Voltmeter 1 No (5) Amp & volt meter selector switches-1 set (6) Auto-manual + Light + control MCB TP 32 Amp- 1Nos each (7) CT -3Nos (8) Push button + ON/OFF light 2 Nos each (9) 5 KVAR Shunt capacitor- 1 No (10) Aluminium Bus bar size 25 mm X 6 mm - 1set (11) 15 HP Star Delta starter (a) 32 Amp Power contactor-3 Nos (b) overload relay 14-23 A -1 No (C) Star delta timer- 1 NO ( d) QT Timer -24 Hours -1 No (e) Motor Protection relay 200 Short circuit, earth fault, Phase loss, unbalance, phase reversal, locked rotor protection Make:-Subtec/protech/ L&T/All DJB Approved Make | 2 | Nos. | 100 | ₹200 |
| 1.02 | S/o PVC insulated flat submersible cable with copper conductor having three core Size 2.5 sq mm 1100 volts(100mtr per roll). Make- Gloster/Universal/Havells/DJB Approved | 4 | Roll | 100 | ₹400 |
| 1.03 | S/o G.I Pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. Make- Jindal/TATA. | 14 | Nos. | 100 | ₹1,400 |
| 1.04 | S/o G.I Tail piece 40mm dia 600mm long medium class with threaded externally on both end. Make- Tata/Jindal | 2 | Nos. | 100 | ₹200 |
| 1.05 | S/o GI Socket 40 mm dia with threaded internally. MAKE: Jindal/Tata/DJB Approved | 28 | Nos. | 100 | ₹2,800 |
| 1.06 | S/o GI elbow with both end having thread, Size- 40mm. MAKE: Jindal/Tata/DJB Approved | 2 | Nos. | 100 | ₹200 |
| 1.07 | S/o GI reducer having thread on boyh end, Size: 50mm to 40mm. MAKE: Jindal/Tata/DJB Approved | 2 | Nos. | 100 | ₹200 |
| 1.08 | S/o GI Union having thread on both end, Size: 40mm. MAKE: Jindal/Tata/DJB Approved | 2 | Nos. | 100 | ₹200 |
| 1.09 | S/o MS clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc. | 2 | Nos. | 100 | ₹200 |
| 1.1 | Supply of MS bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center. | 2 | Nos. | 100 | ₹200 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.73 MB
BOQ_392345.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid