IMPROVEMENT TO CERTAIN EM AND BR WORKS IN LIVING-IN -OFFRS ACCN UNDER AGE BR-I OF GE (AF) ADM AREA AT AF STATION AGRA.

Demolition of brickwork or stone boulders masonry built in CM incl all quins, arches, pillers etc complete all as specified and directed.

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radious, old size built in CM (1:6) including demolition of brick work complete all as specified and directed.

Taking down cement plaster on brick or PCC, stone masonry wall etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces of wall and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound including finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound deemed to be included in quoted rate.

M&L for rendering 5mm thick in CM 1:4 on fair faces of concrete as in ceiling of slab finished even and smooth without using extra cement complete all as specified and directed.

M&L for two coat of oil bound distemper after preparation of new plastered surfaces of wall over a coat of alkali resitant priming paint and including 1mm thick wall care putty complete all as specified and directed.

Complete removal of existing external decorated treatment from wall/ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old plastered decorated surfaces of wall and applying one or more coats of OBD complete all as specified and directed.

S&F 15 mm dia bore Medium grade GI Pipes with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down existing GI tubing complete all as specified and directed.

S&F 20 mm dia bore Medium grade GI Pipes with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down existing GI tubing complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters form frame) not exc 1.5 sqm each complete all as specified and directed.

S&F solid PVC solid door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening with stainless steel screws of required size complete all as specified and directed.

S&f factory Made Solid PVC Moulded Door Shutter,with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. Including 3 Nos of stainless steel 100 mm size hinges, 2 Nos of aluminium 100 mm size handles, 2 Nos of aluminium tower bolt 100 mm size complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel, of size 100mm complete all as specified and directed.

S&F aluminium anodized barrel tower bolt extruded section 200mm long complete all as specified and directed.

S&F extruded aluninum alloy handles, fabricated type anodized 150mm long complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the out side of premises complete all as specified and directed.

M&L for glazed ceramic designed coloured tiles 350 x 450 mm x 7 mm thick on vertical surface such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the out side of premises complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for preparation of old plastered decorated surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed. Make : Cat Part No- Cera- B1020106 (Sleek Essence Dual Flush) or Hindware- 60001 or Prayag- 508.

S&F vitreous china premium/1st quality wash down water closet floor mounted EWC with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete in all respect complete all as specified and directed. Make Cat Part No- Prayag- 4018/4019, Hindware- 55X36X39 or Cera- S1053108.

S&F in repairs plastic water closet seat cover white/coloured, closed pattern with flat bottom and cover and mild steel hinge chromium plated complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. Make : Cat Part No-Prayag-BEA-41, Hindware- F160122 or Cera- F8030301

S&F in repair vitreous china wash hand basin white flat back size 550 X 400 mm excluding taps waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repair 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed. Make :- Prayag Cat Part No. BEA-21 or equivalent in Jaquar/Marc/Plumber

S&F in repair 15mm dia hot and cold centre hole wash hand basin mixer, chromium plated, fancy type complete all as specified and directed. Make : Cat Part No- Prayag - Frost 7750, Jaquar- SOL 61678 or Plumber NTO 5102.

M & L for 18 to 20mm thick granite (any type) work (table rubbed and polished) as in skirting, dado, steps, pillars, jambs, cooking platform, window cills and like in cement mortar 1:4 including pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone over screed bed 15 mm thick in cement mortar 1 : 4 including moulding of edges complete all as specified and directed.

S&F in repairs for brass chromium plated shower rose 100 mm size round with swivel joint including fixing to 15mm dia steel pipe or union complete all as specified and directed. Make : Cat Part No- Prayag- BOS-32, Jaquar- OHS-1709 or Plumber CP- ITP-2401.

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, centre knob operated L-bend for head shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. Make : Cat Part No Prayag- 6575, Jaquar- SOL 6281 or Plumber CP-CRS 3000LB.

S&F for 15 mm 2 way bib taps with flange, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm boreand fixed in repair complete all as specified and directed. Make: CAT PART No- PRAYAG- 6512, Jaquar- CON-041KN or Plumber- PST-4106

S&F for 15 mm Bib taps long body with flange, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm boreand fixed in repair complete all as specified and directed. Make: CAT PART No- PRAYAG- 6509, Jaquar- Con CHR 047 KN or Plumber CP- PST 2104

S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make: PRAYAG CAT PART NO- 6510, Jaquar- CON- 059KN or Plumber CRS-2105

S&F in repair soap dish, brass chromium plated, oval shaped of size 100x50mm (approx), fixed to wall with PVC gully and CP screws complete all as specified and directed.

S&F towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and fixed in position complete all as specified. Make: PRAYAG CAT PART No- BA- 10S, Cera- F5002103 or Jaquar- CAN 1111SN.

S&F 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings such as ends elbow, union etc., complete all as specified and directed.

S & F PVC connections 15 mm size with PTMT nuts of length 450 m complete all as specified and directed.

S&F stainless steel single bowl kitchen sink ISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, or fixed in kitchen platform etc.. including 32mm waste pipe, and making good disturbed portion in white cement/m seal complete all as specified and directed. Make : Prayag Cat Part No- 1216 of Overall Size- 460 X 405 X 178mm, Bowl Size - 405 X 354 X 178mm. Make: Jayna Cat Part No- SBF 01 of Over all size 460 X 405 X 200mm, Bowl Size 410 X 352 X 200mm

S&F grating square fitting of size 150mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT. (Minimum weight 85gms) complete all as specified and directed.

S&F powder coated anodised aluminium sections of required size for door, windows frames ventilator with one or more rebates including of required size jointing cleats, screws sash fasteners, rollers to move shutters, plug for fixing with walls, columns etc complete all as specified and directed.

S&F powder coated anodised aluminium ventilators and window shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg /m incl neccessary joining cleats , glazing clips , rubber packing , anodised aluminium snap beading ,screws, rollers and locking assembly, handles 2 of each shutters , hinges complete all as specified and directed.

S&F steel windows with side hung shutters (glazed and gauzed) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded, including for painting with one shop coat of zinc chromate primer complete all as specified and directed.

S&F framed works such as grills gratings etc, with ends of bars shoulders and or reveted, or forged into spike framed guard bars barred iron doors ladders framed blusters, walk way railing , frame work of water tank and similar work con- forming Fe.290 Gde-E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint including one coat of red oxide complete all as specified and directed.

S & F sheet glass 4.00 mm thick and glazing complete with beads fixed with screws in square exc 0.5 sqm in each pane complete all as specified and directed.

S&F sheet glass ordinary quality 3.00 mm thick and glazing with oil putty or aluminium/rubber beading in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F figured glass, pin-headed type 3.00 mm thick and glazing with oil putty or aluminium/rubber beading in squares n.exc 0.5 sqm in each panecomplete all as specified and directed.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L RCC 1:2:4 ( Type B-1 ) using 20 mm graded stone aggregate as in slabs supported on walls , beams, columns and similar work etc . complete all as specified and as directed.

Use and waste formwork to soffits of suspended slab, slab supported on walls, columns, beams and similar work not exceeding 200 mm thick (Horizontal or sloping) , rough finished surface of complete all as specified and directed

M & L for TMT bars 10 mm dia and over, cut to length bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for plain cement concrete type C-2 1:3:6 (40 mm graded aggregate) as in plinth protection 75mm thick including demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Material and labour for rendering in CM (1:4),15mm thick on wall of sunken floor suraces finish the surface even and smooth without using extra cement mixed with water proofing compound complete all as specified and as directed . Note: Water proofing compound deemed to be included in quoted rate.

M & L for cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in sunken floor for correction of slope etc complete all as specified and as directed.

Taking down eaves gutters and rain water pipe (any size or pattern) including all fittings , heads, shoes, bends, swan-necks etc. complete all as specified and directed.

S&F PVC SWR pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F factory made pre-laminated PVC solid anti termite board 18-20 mm thick prelaminated on both sides with wooden finished on one side and white finished lamination on other side as in cabinets etc complete fixed in position with SS screws complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised ( width of flaps 40 mm when open in mm) complete all as specified and as directed.

S&F Stainless magnatic catcher of approved quality in cabinets etc. including fixing with necessary screws double strips(horizontal type complete all as specified and directed.

S&F Stainless steel handle of 100mm size for cabinet etc complete all as specified and directed.

S&F Stainless steel tower bolt of 100mm size for cabinets etc complete all as specified and directed.

S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets and finials fency type, stops fixed with ss screws etc complete all as specified and directed. Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of old plaster and putting aluminium channel in groove of required size complete all as specified and directed. Note : Making grooves(of uniform size 15 mm x 15 mm) shall be included in quoted rates.

Supply & Fixing sheet glass corner self (of 3 tier) assembly consisting of 5.5mm thick sheet glass self 15cm radius with chromium plated bracket guard and rail and fixed with CP steel screws on wood cleats with wall complete all as specified and directed.

M&L for point wiring complete with PVC (FRLSH) insulated unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area single core drawn in and including not less than 20 mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, complete including 4 sqmm nominal cross sectional area PVC(FRLSH) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including cutting chases for concealed piping and making good disturbed surface to match the existing surface complete all as specified and directed.

S&F in replacement switch piano flush type one way 6 amps SP 230 volts complete all as specified and directed.

S&F in replacement bell push flush type 6 amps SP 230 volts complete all as specified and directed.

S&F in replacement switch in replacement piano flush type one way 16 amps SP 240 volts complete all as specified and directed.

S&F in replacement socket outlet 2 in 1, 3 pin 6 amps flush type 240 volts complete all as specified and directed.

S&F in replacement socket outlet 2 in 1, 6 pin, 5 and 16 amps flush type 230 volts complete all as specified and directed.

S&F in replacement bell ding dong AC , 230 VOLTS, single pole complete all as specified and directed.

S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

S&F in replacement ceiling fan regulator, electronic stepped type 5 stage speed regulation, ISI marked complete all as specified and directed.

Supply & fix in replacement Decorative wall light fitting including LED lamp complete all as specified and directed. Make: Philips Steylo wall light, Havells cat pat No- LHFHANDBTN1O007, Halonix cat pat No: HLWB-01-E27

S & F sheet metal single pole and neutral enclosure with socket, plug top complete with one single pole MCB of 20 Amps, 240 volts complete all as specified and directed.

S&F in replacement existing U/S light fitting with energy saving decorative LED batten 20 watt (4 Feet), 230 voltas, energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffusre & integrated electronic driver complete with all accessories prewired and includeing making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Note:- Power factor should not be less thtn 0.95

S&F in replacement existing U/S light fitting with energy saving decorative LED batten 10 watt (2 Feet), 230 voltas, energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffusre & integrated electronic driver complete with all accessories prewired and includeing making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Note:- Power factor should not be less thtn 0.95

Supply and fixing LED in replacement of old U/S light fitting mirror type with high out put diffuser 1 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for taking down carefully existing ceiling fan/exhaust fan for greasing / oiling of ball bearings / bushes and making it for smooth and noise free operation and painting with Hi-Gloss synthetic enamel paint of approved shade by spray painting after filling cavaties and re-fixing after providing new fan clamp, nuts/bolts, washers, down rod as required and provision of 3 core copper flexible cable of size 1.0 Sqmm from ceiling rose to fan connector complete with writing of MES No. on the fan surface complete all as specified and directed.

Supply & fixing in replacement of PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.

Supply & fixing in replacement of PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified and directed.

Supply & fixing in replacement of PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 150 mm and 50 mm deep complete all as specified and directed.

S&F in replacement sheet metal enclosure MCB distribution board, single door with IP-43 protection single pole and neutral 240 volts, 4 way, including suitable size copper bus bar and neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed.

S & F in replacement of MCB single pole 240 volts, 'B' curv of rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables complete all as specified and directed.

S & F in replacement of MCB single pole neutral 240 volts, 'B' curv of rating 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables.

S & F in replacement MCCB 160 AMP 4 pole 415 volt, 36 KA complete all as specified and directed

S&F in repair sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20 mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.

S&F in repair sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 1.5 sqmm nominal cross sectional area and one run of1.5 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20 mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.

M&L for removal of existing old unsv earthing complete and providing new earthing with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way including earth work in any type of soil , removal of surplus soil to a distance n.exc 50 m and connecting, testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).