Extension of Jawans Canteen for Creation of Canteen Store at PHQ Agling.

Amount

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 m, as directed Engineer-in-Charge. All kinds of soil:

Dumping stone including cost of stones in horizontal level

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Ce

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Filling available excavated earth (excluding rock) in trenches, plinth, sides ofoundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and fixing upto floor five five level precast cement concrete solid blocks including hoisting an setting in position in cement mortal

Prowiding wood work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: a) 2nd class kail wood (50x12mm) Window

b) 2nd class kail wood (50x20mm) Door

Providing and fixing panelled or panelled and glazed shutters for door, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second kail wood(35mm thickness)

Providing and fixing panelled or panelled and glazing in panelled or panelled and glazed shutters for door, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.

Providing and fixing shutters for door, windows and clerestory windows using 4mm thick float glass nanes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Steel work in build up tubular (round, square or rectanglar hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped wasers etc. complete

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trussses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete

Providing and fixing bright finished brass handles with screws etc. complete. A) 125mm

15mm cement plaster on the rough side of single or half brick wall of mix. 1:4 (1 cement : 4 sand)

providing and applying white cement based putty of specified thickness, of approved brand and manufacture, over the plastered wall surface to prepare the furface even and smooth complete. 2mm thick

wall painting with acrylic emulsiion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Providing and fixing ISI marked Oxidlzed M.S. sliding door bolts with nuts and screws etc. complete :300x16mm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4(cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.

Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be oaid separately): Flat pressed 3 layer particle board or graded wood particle board IS : 3087 (18mm thick)

Carriage of material from Mechnical transport A)Soling stone-(Upto 20km Avg)

B) Cement/Steel/Pipe-(Upto 10km Avg)

C) Sand, stone aggregate below 40mm nominal -(Upto 20km Avg)

M/s SAMEER FAYAZ