Maintenance Work (Surface Dressing, Jungle Cleaning, Drain Cleaning, Painting and other Miscellaneous Work) for Three Years of Sector Boraki Extension, Greater Noida.

Surface dressing of the ground including removing vegetation and in equalits not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m (All kind of soil) DSR-18/2.28.1

Cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of grith upto 30 cms.measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50M. out side the removal of rubbish upto area cleared. SOR/259(i) Same as above but grass only SOR-20/259(a)/4.06

Tractor trolley with driver and including POL (AR/GNIDA)

Supply of labour SOR-2020/S.No.-12

M-150 Brick Work in 1:6 cement & fine sand 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.

Same as item no. 303 but in 1:4 one cement & four fine sand of 1.25 F.M. mortar. SOR-305

12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) (DSR-18/13.4.2)

Supply and fixing RCC direction board of size 2000 X510 X80 make in concrete 1:1:5:3 including reinforcement, shuttering etc all complete for proper of work as per direction of engineer in charge (AR/GNIDA)

Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm ISI no. 105/106/133-1950.As in item (647) above but for every subsequent coat on previously treated surface SOR-647+648

Repainting letters up to 2.5 cm. size including supply of all materials, labours & tools and plants etc. required for proper completion of the work. As in item 820 above but size above 8cm. SOR-20/820/21.05 but up to 15cm.SOR-20/822/21.07

Repainting border line upto 2.50cm to 5.00cm wide SOR-20/837(b)/21.14

Excavation in foundation in ordinary soil (loam,clay or sand) icluding lift up to 1.50 m. and lead up to 30m. and including filling watering and ramming of excavated earth into the trenches or into the space of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30m. from the foundation trenches ( where machine con not rech/move).SOR-251a

Extra rates for quantities of work excavated in or under water and liquid subsoil including pumping out of water as required. DSR-18/2.24.1

CARTAGE OF Earth of fly ash when added to schedule item no. 253

Tractor with water tanker with cost of water including POL SOR-2020/SL.No.-27

Providing JCB with driver and including POL (AR/GNIDA) Based on SOR-20/SI NO-21

Hiring of portable Re-cycle jetting calus section machinenmounted on mahindra volero maxi with hydraqulically operate mahindra de-silter upto depth of 15 water with driver for the area to gr.noida as direated by engineer in-chare for 8.50 hours per day overfine will be paid on pro rate basic processure 3000 PSI liters, rate as per (GNIDA)

Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (UPPWD/SOR-2020/281)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more. (Sail Steel) (DSR-2018/5.22.6/AR)

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications RCC Grade M-25 using batching plant transit mixture and manual placing (MORTH-20, Item No. /9.06/E/case-II)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (Sail Steel) (DSR-2018/10.25.2/AR)

Labour Cess and GST will be paid extra as per govt.orders