Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.7 LAccepted-AOC RZ F1 104 MAHAVIR ENCLAVE PALAM NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L1 | Accepted-AOC accepted due to L1 | |
| 2 | L2₹28.4 L+₹3.7 L (14.9%)Rejected-AOC WZ143 A 7 A S 4 43 GALI NO 2 OLD MAHABIR NAGAR NEW DELHI 110018 | NEW DELHI | NEW DELHI | DELHI | 110018 | L2 | Rejected-AOC higher rate |
Tender Value
Refer Docs
EMD Value
₹72,000
Closing Date
2 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NEW DELHI
GE NEW DELHI
CA NO GE/ND35/202223 WELCOME MAINTENANCE AND CONNECTED WORKS IN MD OFFRS ENCLAVE AT SP MARG UNDER GE NEW DELHI
2022_MES_533471_1
GE/ND-35/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE NEW DELHI
REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE NEW DELHI
₹72,000
Yes
8 Sept 2022
24 Jun 2022
5 Aug 2022
24 Jun 2022
2 Aug 2022
8 Jul 2022
Amount
M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornice, pillaster, etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds moss and efflorescent salt and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of wall complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including complete removal of existing surfaces by using mechanical scrapers and filling holes with putty etc and applying two coats of white wash on old decorated surfaces of wall complete all as specified and directed.
-Ditto-, All as per item No. 1 herein before but as on ceiling.
-Ditto-, All as per item No. 2 here in before but as on ceiling .
Complete removal of existing old treatment on surface from walls using mechanical scrapper only and filling holes of nails with putty etc and applying a coat of uniform ( average 1.50 mm thickness) of cement base wall care putty of approved make (Birla/JK) to the entire surface of walls surfaces finished even and smooth and then applying a coat of alkali resistant primer over putty surface and finally applying two coats of oil bound distemper on wall surface to give an even and smooth surface complete all as specified and directed. Make :- Asian Paints(Royale), ICI Dulux/Nerolac paints/Berger (Bishon). Distempering shall be carried out by paint roller only.
M & L for applying one coat of distemper oil emulsion (O.B.D) white or tinted (As approved) on walls/vertical surfaces including preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed. Distempering shall be carried out using paint roller only.
M & L for applying one coat of distemper oil emulsion (O.B.D) white or tinted (As approved) on ceiling surfaces including preparation of old decorated surfaces of ceiling by washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed.
M & L preparation of old painted surfaces of wood or wood based materials of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
-Ditto- all as per item No 08 above but two coat.
M&L for Preparation of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed.
-Ditto- all as per item No 10 above but two coat.
M&L for Preparation of old painted surfaces of steel and iron surfaces as in eaves gutter and pipes any description not exe 60 Cm girth including holderbats, distance pieces, etc and applying one coat of synthetic enamel paint all as specified and directed.
M&L for Preparing old painted surfaces of brick,stone,concrete, asbestos cement or plaster surfaces of any description over 10 cm girth or width, not otherwise described and painting with one coats of synthetic enamel paint complete.
M&L for one or more coat of French polish on old surfaces of any description, width or girth incl cleaning and preparing old wooden surfaces complete all as specified and directed.
M&L for taking down cement or cement lime plaster any description incl racking out joints, hacking for key , scrubbing down with water etc including removal of debris from the MOD land complete all as specified and directed.
M&L for 15mm thick ready mix plaster in patches of (Make Ultra tech) on any surfaces of brick/concrete including application of bonding coat as per manufacturers instruction including finished even and smooth complete all as specified and directed.
M&L for 15 mm thick ready mix plaster in patches of (Make Ultra tech) on any surfaces of brick/concrete including application of bonding coat as per manufacturers instruction including finished even and smooth complete all as specified and directed as in ceiling/soffits.
M&L for preparation of new plastered or unplastered surfaces of walls and applying three coat of white wash complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
M& L for applying two or more coats of oil bound distemper on newly plastered surfaces of walls including a coat of 1.50 mm thick (average) wall care JK putty to give an even and smooth surface including preparation of new surfaces all as specified and directed.(Note-Payment shall be made for two coats only ) complete all as specified and directed. Make: Asian paints (Royale) ICI Dulux /Nerolac paints /Berger (Bishon). Distempering shall be carried by using paint roller through authorised applicator only.
M&L for touch up of distemper applying ( two or more coat) on walls area of distemper not exceeding 4 sqm ,match to existing shade of wall including preparation existing surface complete all as specified and directed.
M&L for refixing of shutters of any description in same opening after taking down for resecuring ,easing, repairing etc exc 1.0 sqm but n exe 2.0 sqm complete all as specified and directed..
S&F stainless steel drapery rods 25mm dia confirming to Gde 340 and having wall thickness 1.40 mm (minimum) with two number brackets and two numbers of knob for each curtain rod ( length varying from 1.1. to 2.50 RM) fixed to brick/concrete wall knobs on each end of curtain rod .(Fixed in repairs)
M&L for dismantling of stone slabs and tiles of any description or thickness as in floors and aprons etc. laid, bedded and pointed in cement mortar including screed bed of any description and removal of debris complete all as specified and directed.
Dismantling timber scantling as in fillets , rails , post ,rafters, purlins, etc under 40 Sq. cm in section in unframed work complete all as specified and directed.
M&L for Cutting chases in Brick walls, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed.
M&L for Marble work 18 to 20mm thick, Granite, (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, bedding layer of cement mortar 15 mm thick in CM 1:6 complete all as specified.
M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 3 Sq.cm and not exceeding 6 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed.
M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed.
M&L for Beads of 2nd class hard wood, straight (any size) for glazed or gauged joinery, renewed, including mitres etc,. and removing old beads as in repairs complete all as specified and directed.
Continuous (piano) hinges, mild steel, bright finish or electrogalvanized ,Width of flap (when open), 40 mm complete all as specified and directed.(fixed in repairs)
40 mm dia , cupboard knobs fixed with nut , screw and washer of stainless steel complete all as specified and directed.(fixed in repairs)
Tubular towel rail 20mm dia 'D' type brass chromium plated 60 cm long between flanges fixed complete all as specified and directed.(fixed in repairs)
Ball catcher with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.(fixed in repairs)
Double aluminium channel size 10x20x2mm, complete all as specified.(fixed in repairs)
MS roller with "C" shape stapple, chromium plated for 5.00 mm thick sheet glass, complete all as specified and directed.(fixed in repairs)
M&L for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples and fixed in repairs complete all as specified and directed.
M&L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in CB shutter, showcase frame, shelves, with 6 mm thick teak wood lipping all-round incl polishing to lipping and all as per specified and directed.(fixed in repairs)
M&L for Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.
M&L for Glazed ceramic walls tiles coloured (300 x 200 mm/350x250mm/450x300mm/300x450), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer complete all as specified and directed.
M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.
M&L for light shade Vitrified ceramic tiles 10 mm thick ( square / rectangular) polished , area of each tiles not exe 0.36 sqm , in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement incl screed bed or bedding 15 mm thick in CM 1:6 for laying floor finished complete all as specified and directed.
Ditto - as all as per item No. 43 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC / wooden beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.
M&L for Glazing with 5.5mm thick sheet glass, ordinary quality, of any size as in aluminium window and including grinding of edges for showcase sliding shutter and shelves incl fixing brackets complete all as specified and directed.
M&L for Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.
M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads or from metal frames including punching or drilling out old glazing pins /spring clips and providing and fixing new one.
Taking up or down steel tubing and connection incl cleaning for refixing or removal to store for 15 mm dia pipe complete all as specified and directed.
M&L for Mild steel galvanized steel tubing of 15 mm bore with screwed socket joints as in concealed /open pipe work , medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors complete all as specified and directed.
M&L for Bib taps, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed down screwed for iron pipe, 15 mm bore complete all as specified and directed. (fixed in repairs)
Bib tap, 15 mm bore, standard of PTMT any colour high pressure screwed for iron pipe and fixed in repair.
Brass chromium plated toilet paper holder, fixed to wall with CP brass screws complete.(fixed in repairs)
Stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete (fixed in repairs) .
Stop valves(angle valve type), cast copper alloy, fancy type chromium plated of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete (fixed in repairs) .
PVC connections 15 mm size with PTMT nuts of length 600 mm. (fixed in repairs)
Toughened glass, 5.5mm thick, bathroom corner shelf of size 300mm with stainless steel railing and stainless steel fasteners fixed on wall complete (fixed in repairs)
Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) white including fixing bolt complete as fixed in repair.
Plastic water closet seat, white , closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing (fixed in repairs) complete.
PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 liters, low level, White with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description complete all as specified and directed.
Health faucet Chromium plated brass with 1.50 m long flexible pipe for WC .(fixed in repairs)
M&L for Vitreous, China wash basin, white , flat back , size 550x 450mm excluding taps, waste chain and plug and porcelain stopper but including the brackets, 32mm dia brass chromium plated waste coupling and PVC waste pipe complete all as specified and directed.(fixed in repairs)
M&L for Sink with drainage board made of stainless steel 1 mm thick kitchen sink with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including cantilever bracket and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm including taking down the old sink of any description complete all as specified and directed.
Brass CP mixer (Central hole basin mixer) , for mixing hot & cold water screwed down for iron pipe 15 mm bore complete all as specified and directed. (fixed in repairs)
M&L for PVC mirror cabinet of size 330 mm x 430 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete (fixed in repairs) all as specified and directed.
M&L for Brass chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.(fixed in repairs)
M&L for Glass self assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.(fixed in repairs)
M&L for Brass chromium plated shower rose with swivel joints, 125 mm dia with CP neck including fixing to steel pipe or union 15 mm nominal bore complete all as specified and directed. (fixed in repairs)
Demolition of cement concrete of any description and in any position, provided for and removing rubbish out of MoD land complete all as complete all as directed.
Supply only water proofing compound
M & L for Plain cement concrete (1:5:10) type E-2 using 40mm brick course aggregate as in filling under floor as in sunken portion complete all as specified and directed.
M&L for 40mm th PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) as in flooring, finished fair and even, mixed with water proofing compound (as per manufacturer's instruction) as approved by GE complete all as specified and directed.( Note : WPC shall be measured and paid separately.)
M&L for 15mm thick cement plastering on brick or conc surfaces in CM 1:3 finished even & smooth without using extra cement mixed with water proofing compound (as per manufacturer's instruction) as approved by GE complete all as specified and directed.( Note : WPC shall be measured and paid separately.)
S & F spun cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint laid in trenches or floors, including tacking down old unserviceable CI pipes complete all as specified
S & F spun cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to wall on any height of building including tacking down old unserviceable CI pipes complete all as specified
S & F spun cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint laid in trenches or floors, including tacking down old unserviceable CI pipes complete all as specified
S & F spun cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint fixed to wall on any height of building including tacking down old unserviceable CI pipes complete all as specified
S&F stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 75mm bore pipe complete all as specified and directed.( Fixed in repair)
S&F stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 100mm bore pipe complete all as specified and directed.( Fixed in repair)
S & F CI bends 75mm dia (any radius), diminishing pieces or tapers( larger bore measured), with oval access door complete all as specified and directed.( Fixed in repair)
S & F CI bends 100mm dia (any radius), diminishing pieces or tapers( larger bore measured) with oval access door complete all as specified and directed.( Fixed in repair)
S & F CI bends 100mm dia (any radius), with duck's foot or heel rest complete all as specified and directed ( Fixed in repair)
S&F 100mm bore CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, with oval access door complete all as specified and directed. ( Fixed in repair)
S&F CI nahani trap with grating including jointing to waste pipe , dia of outlet 75mm fixed in PCC 1:2:4 type B1 all as specified and directed. (ISI Marked)
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls including tacking down PVC pipe complete all as specified & directed.
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. including tacking down PVC pipe
S&F 110mm PVC(SWR) bends any radius complete all as specified and directed.
S&F 75mm PVC(SWR) bends any radius complete all as specified and directed.
M&L for Glazed ceramic walls tiles coloured (300 x 200 mm/350x250mm/450x300mm/300x450), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer including dismantling existing broken/cracked tiles including removing rubbish off the premises complete all as specified ( To match size of existing tiles).
M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes including dismantling broken/cracked tiles and removing of rubbish off the premises complete all as specified and directed.
M&L for light shade Vitrified ceramic tiles 10 mm thick ( square / rectangular) polished , area of each tiles not exe 0.36 sqm , in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement incl screed bed or bedding 15 mm thick in CM 1:6 for laying floor finished including dismantling broken/cracked tiles and removing rubbish off the premises complete all as specified and directed.
Ditto - as all as per item No. 90 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for touch up of distemper (applying two or more coat ) on walls area of distemper exceeding 4 sqm not exceeding 12 sqm ,match to existing shade of wall including preparation existing surface complete all as specified
S&F in repairs stainless steel plate rack of size 900 X 775 X 250 mm, made out of 1.00 mm thick steel sheet fixed to walls incl rawl plugs, drilling etc complete incl taking down old wooden plate rack of make- Shakti model No KR-567 complete all as specified and directed..
M&L treating at points of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @ 0.50 Ltr/hole by drilling 6 mm dia holes at the down ward angle of 45 degree a 150 mm centre to centre and sealing the same to match the specification of existing finishes complete all as specified and directed.
M&L taking down existing steel rolling shutter incl hood cover pull & push type not exc 12 Sqm area of clear opening and cleaning the sides of shutters suspensions shafts,anti-guide channels and greasing all the moving parts of rolling shutters and straightening rolling shafts and replacement of any necessary parts required to make the shutters moving smoothly and entire rolling shutters shall be made functional upto the entire satisfaction of Engineer -in-Charge and refixing the same incl hood cover complete all as specified and directed.
S&F in repairs floor door stoppers of aluminium alloy body and tongue, anodised, with hard drawn steel spring over all length of cover plate is 140 mm complete all as specified.
S&F in repairs aluminium anodised hook and eye of 200 mm long complete all as specified and directed.
S&F MS Night latch of 100mm size 4 lever complete all as specified including fixed in repairs.
S&F mild steel framed work as in grills, gratings etc with end of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed blustered, walk ways, railing and similar works confirming to Fe 290 Gde E-165 including necessary welding required at site to increase the existing railing height in balcony of Md Offrs Qtrs. complete all as specified and directed.
Taking down copper/aluminium point wiring (fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, Light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.
M&L for point wiring with PVC FRLS insulated unsheathed multi-stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in existing conduits /PVC casing capping /PVC concealed conduit and its accessories, including replacement of factory made steel boxes suitable for modular switch/sockets including modular plates of suitable size as per site requirement for the following: Note: Cutting & chasing, if required, shall be measured/paid under relevant items
One light/ceiling fan/exhaust fan point controlled by one no., one way switch 5/6 amps.
One light point controlled by one no's, two way switch, 5/6 amp
One bell / buzzer point controlled by one bell push
One bell / buzzer point controlled by one bell push
One 3 pin 5 Amps socket outlet point controlled by one no. one way switch, 5/6 amp on independent board.
One 3 pin 5 Amps socket outlet point controlled by one no. one way switch, 5/6 amp on same board.
All as per item No 101.00 here-in-before but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 amp socket outlet point on independent board complete all as specified and as directed.
All as per item No 101.00 here-in-before but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4 Sqmm single core cable on independent circuit complete all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good the disturbed surface, cutting not exc. 10 cm girth on brick walls complete all as specified and as directed.
S&F Modular switch 6 amps 250 V AC one way with ISI mark including 6 amps switch frame complete all as specified and as directed.
S&F Modular switch 6 amps 250 V AC two way with ISI mark including 6 amps switch frame complete all as specified and as directed.
S&F modular switch 16 A SP one way 240 volts complete all as specified and as directed.
S&F modular socket 6 A Multi socket for 2/ 3 pin, 240 volts complete all as specified and as directed.
S&F modular socket outlet 16 A-2/3 pin combined 240 volts complete all as specified and as directed.
S&F bell push, flush type 5 A 240 volts complete all as specified and as directed.
S&F modular bell push 6A with Neon 1 module 240 volts complete all as specified and as directed.
S&F electronic fan regulator modular type 100Watt step type Double Modular as per existing complete all as specified and as directed.
S&F switch piano flush button single pole one way 6 amps complete all as specified and as directed.
S&F switch piano flush type 15 amps single pole one way complete all as specified and as directed.
S&F socket outlet 5/6 amps 2 in 1, 3 pin flush type complete all as specified and as directed.
S&F socket outlet 2 in 1, 3 pin 5 and 15 amp, flush type complete all as specified and as directed.
S&F STEP type electronic fan regulator flush type 230 volts complete all as specified and as directed.
S&F in repair electric bell Ding-Dong AC 230 Volt complete all as specified and as directed.
S&F ceiling rose, 3 phase/ PVC/ polycarbonate isolated body complete all as specified and as directed.
Taking down DB of SPN 4/8/12 way type, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc. complete all as specified and as directed.
S&F sheet metal enclosures for DBs when MCB to be used, SPN double door 240 volt, 12 way with 200 amps rated bus bar complete all as specified and as directed.
S&F sheet metal enclosures for DBs when MCB to be used, SPN double door 240 volt, 8 way with 200 amps rated bus bar complete all as specified and as directed.
S&F sheet metal enclosures for DBs when MCB to be used, SPN double door 240 volt, 4 way with 200 amps rated bus bar complete all as specified and as directed.
Taking down MCB 6-32/40-63 Amps SP/SPN and 40-63 Amps TPN type, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc. complete all as specified and as directed.
S&F MCB TPN 40 to 63 Amps, 415 V, 10 kA rupture capacity, series 'C' complete all as specified and as directed.
S&F of MCB SPN 40 to 63 Amp 240 volt 10 kA rupture capacity, series 'C' complete all as specified and as directed.
S&F of MCB SPN 6 to 32 Amp 240 volt 10 kA rupture capacity, series 'C' complete all as specified and as directed.
S&F MCB SP 40 Amp to 63 Amp, 240 V, 10 kA rupture capacity, series 'C' complete all as specified and as directed.
S&F MCB SP 6 Amp to 32 Amp 240 volts 10 kA rupture capacity, series 'C' complete all as specified and as directed.
Taking down Metal clad enclosure with plug and socket 10/20 Amps, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc. complete all as specified and as directed.
S&F sheet Metal enclosure with plug and socket, 10 Amp, 240 volts with one MCB single pole, complete all as specified and as directed.
S&F sheet Metal enclosure with plug and socket 20 Amp 240 volts with one MCB single pole complete all as specified and as directed.
S&F in replacement LED batten of 20 Watt 230Volt (size 4 ft), box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F in replacement of Endura Linear LED batten of 10 W (2 ft.), extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver in AC complete all as specified and as directed.
S&F in replacement aesthetically designed circular shaped Recess & surface /PENDANT MOUNTING designer LED light of 18 W fixture with PMMA diffuser to give glare free light, high performance low-height back lit downlighter, Robust PDC aluminium housing, Efficacy 100LM/W complete all as specified and as directed.
Supply & fix in replacement aesthetically designed Wall mounted decorative wall LED light of 6 W fixture with opal diffuser to give glare free light including suitable LED lamp of 6 W having Lamp base E27 complete all as specified and as directed.
Supply & fix in in replacement aesthetically designed Wall mounted decorative mirror LED light of 3.6 W fixture with opal diffuser to give glare free light including suitable LED lamp of 3.6 W having Lamp base E27 complete all as specified and as directed.
Supply & fix in replacement aesthetically designed recessed/surface mounted decorative downlighter LED light of 12 W fixture with opal diffuser to give glare free light including suitable LED lamp of 12 W complete all as specified and as directed.
Supply & fix in replacement aesthetically designed recessed/surface mounted decorative downlighter LED light of 15 W fixture with opal diffuser to give glare free light including suitable LED lamp of 15 W complete all as specified and as directed.
Supply & fix in replacement 3 watt aesthetically designed recessed/surface mounted decorative downlighter/ LED Spot Light, with CRI >80, Beam angle 36 degree, Vertical Tilt 30 degree, complete all as specified and as directed.
Supply & fix in replacement 6 watt aesthetically designed recessed/surface mounted decorative downlighter LED Spot Light, with CRI >80, Beam angle 36 degree , Vertical Tilt 30 degree complete all as specified and as directed.
Supply & fix in in replacement 2x2 Panel light surface mounted LED light of 36 W fixture with opal diffuser to give glare free light including suitable LED light of 36 W complete all as specified and as directed.
Supply & fix in replacement 9 watt aesthetically designed recessed/surface mounted decorative downlighter LED Spot Light, with CRI >80, Beam angle 36 degree , Vertical Tilt 30 degree complete all as specified and as directed.
Supply & fix in replacement 1x4 Panel light surface mounted LED light of 36 W fixture with opal diffuser to give glare free light including suitable LED light of 36 W complete all as specified and as directed.
Supply & fix in replacement 12 watt, aesthetically designed recessed/surface mounted decorative downlighter LED Spot Light, with CRI >80, Beam angle 36 degree, Vertical Tilt 30 degree complete all as specified and as directed.
S&F in replacement factory made load line DBs double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as outgoing complete all as specified and as directed.
S&F in replacement factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 8 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as outgoing complete all as specified and as directed.
Supply and fix in replacement Metal clad plug top of capacity 20 Amp, 240 volts complete all as specified and as directed.
Supply and fix in replacement Metal clad socket of capacity 20 Amp, 240 volts complete all as specified and as directed.
Supply and fix only decorative laminated sheet 3mm thick of size 8'' X 12'' including necessary cutting of sheet for fixing switch / socket complete all as specified and as directed.
Supply and fix only decorative laminated sheet 3mm thick of size 8'' X 5'' including necessary cutting of sheet for fixing switch / socket complete all as specified and as directed.
Supply and fix only decorative laminated sheet 3mm thick of size 7'' X 4'' including necessary cutting of sheet for fixing switch / socket complete all as specified and as directed.
Supply and fix only decorative laminated T cover sheet 3mm thick of size 2/3 inch dia complete all as specified and as directed.
Supply and fix only fan capacitor of the following capacity :-
Supply and fix only non metallic rigid PVC conduit medium grade 20 mm dia, ISI Mark complete all as specified and as directed.
Supply and fix only non metallic rigid PVC casing caping, ISI Mark complete all as specified and as directed.
Taking down of ceiling fan/ exhaust fan, dismantling of blades, transportation to workshop for carrying out rewinding, transportation to site, reinstallation and testing complete all as specified and as directed.
M&L for Rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enamelled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement of gun metal bush, ball bearing wherever required complete all as specified and as directed.
All as per ser item No 164.00 here-in-before but exhaust fan 230/300 mm sweep
All as per ser item No 164.00 here-in-before but exhaust fan 400 mm sweep
S&F in repair ceiling fan Ball bearing of suitable size & model (as per sample) complete all as specified and as directed.
M&L for replacing 'U' clamps with rubber reel, bolts, nuts, washers and safety pin for ceiling fan of any size/ make complete all as specified and as directed.
M&L in repair for Down rod of 1' height fabricated out of MS pipe 12mm dia heavy duty duly painted with one coat of synthetic enamel white paint complete all as specified and as directed.
S&F in repair Canopy of Ceiling fans of 1200/1400mm swipe size heavy duty duly painted with one coat of synthetic enamel white paint complete all as specified and as directed.
M&L for spray painting (white colour) with synthetic enamel paint to Ceiling fans/Exhaust fan of any capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black synthetic enamel paint complete all as specified and as directed.
Supply & fixing in replacement flat ceiling fan blade of aluminium, 1mm thickness suitable for 1200mm sweep ceiling fan,12-15 degree tilted, having 3 Nos in each set complete all as specified and as directed.
Supply & fixing in replacement flat exhaust fan blade of aluminium, 1mm thickness suitable for 230/300/400 mm sweep exhaust fan, 12-15 degree tilted, having 3 nos. in each set complete all as specified and as directed.
S&F in repair Frame of 230/300 /400 mm Aluminium metallic exhaust fan including taking down of old frame complete all as specified and as directed.
Supply & fixing in repair flat ventilation fan blade of PVC, 1mm thickness suitable for 230/250/300mm sweep exhaust fan,12-15 degree tilted, having 4 nos. in each set complete all as specified and as directed.
S&F in repair ventilation fan motor of size 230/250/300 mm including taking down of old ventilation fan motor complete all as specified and directed.
S&F in replacement of PVC Frame of 230/250/300 mm ventilation fan including taking down of old frame complete all as specified and as directed.
Taking down carefully Geysers 25/50 Ltr capacity, opening for inspection, cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering/ brazing etc including replacement of pressed rubber gasket, Nuts, bolts, neon indicator lamp 1 Amp etc. complete all as specified and as directed.
M&L for spray painting (white colour) with synthetic enamel paint to Geysers 25/50 Liters capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and as directed.
M&L in repair for heating element of 2.0 kW (Circular) as required at site including rubber washers (ISI marked) etc complete all as specified and as directed.
M&L in repair for heating element of 2.0 kW (triangular) as required at site including rubber washers (ISI marked) etc complete all as specified and as directed.
S&F in repair storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 50 litre capacity geysers with collar complete duly tested at required pressure complete all as specified and as directed.
S&F in repair storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure complete all as specified and as directed.
M&L for replacement of insulating material (Glass wool) for 25/ 50 litre capacity Geysers complete all as specified and as directed.
S&F in repairs base plate assembly 20 SWG heavy duty suitable for 50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample) complete all as specified and as directed.
S&F in repairs base plate assembly 20 SWG heavy duty suitable for 25 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample) complete all as specified and as directed.
M&L in repair for chromium plated copper connection pipe 600/1000 mm long with two brass adopters washers and connecting up complete all as specified and directed.
M&L in repair for safety nut for high pressure release (As per sample) complete all as specified and as directed.
M&L in repair for top cover for geysers of 25/50 ltrs capacity any make as required at site duly painted with two coats of Synthetic enamel spray paint (first quality) complete all as specified and as directed.
S&F in repair for bottom cover for geysers of 25/50 ltr any make required at site duly painted with synthetic enamel spray paint (first quality) with inspection plate in two pieces complete all as specified and as directed.
S&F in repair outer cover for geyser made out of MS sheet suitable for 50 ltrs capacity geyser vertical/horizontal type complete all as specified and as directed.
S&F in repair outer cover for geyser made out of MS sheet suitable for 25 ltrs capacity geyser vertical/horizontal type complete all as specified and as directed.
S&F in repair thermostat (ISI Marked) for 25/50 Liters capacity Geyser complete all as specified and as directed.
S&F in repair indicator lamp (Red & Green) 230 volts suitable for Geyser (as per sample) complete all as specified and as directed.
Supply and fix in repair mild steel hole fastener 10mm dia, 100mm long including nut and washer complete all as specified and as directed.
Taking down MCCBs any type, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/panel etc. complete all as specified and as directed.
Supply and fixing MCCB, 4 pole, 415 volt of capacity 125A breaking capacity not less than 25KA, Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc. complete all as specified and as directed.
Supply and fixing MCCB, 4 pole, 415 volt of capacity 250 Amp, breaking capacity not less than 36 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc. complete all as specified and as directed.
M&L for complete servicing of gate sensor including rewiring, cleaning, repair of electronic motor, sensor and replacement of all other required accessories for smooth functioning complete all as specified and as directed. Note: Cost of replacement of spare parts is deemed to be included in quoted rate.
S&F in replacement gang box with modular plate cover two module suitable for fitting one 5Aswitch /socket complete all as specified and as directed.
S&F in replacement gang box with modular plate cover four module suitable for fitting one 5A switch and one socket complete all as specified and as directed.
S&F in replacement gang box with modular plate cover four module suitable for fitting one 15A switch and one socket complete all as specified and as directed.
S&F in replacement gang box with modular plate cover six module suitable for fitting one 5Aswitch /socket complete all as specified and as directed.
S&F in replacement gang box with modular plate cover eight module suitable for fitting one 5A switch and one socket complete all as specified and as directed.
S&F in replacement gang box with modular plate cover twelve module suitable for fitting one 15A switch and one socket complete all as specified and as directed.
M&L for taking down ceiling fan & taking out old unsv ceiling fan motor & replacement with new copper winding motor one by fixing nut bolts complete all as specified and as directed by Engr-in-Charge
S&F in replacement LED Bulb inverter type,9watt,including suitable lamp holder suitable for fitting in pendant holder complete all as specified and directed.
M/S Sunil Steel Works
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .