SPECIAL REPAIRS TO FOUNDARY BUILDING P201 AT GTRE BANGALORE

Amount

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete

M & L plain cement concrete 1:2:4, type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding concrete as leveling course complete all as specified and as directed

M & L for rendering 10 mm thick over roof concrete padding surface to obtain smooth finish in CM 1:3 and finishing the surface even and smooth without using extra cement with water proofing compound complete all as specified and directed

M&L APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Weight not less than 150 gms/Sqm) laid on primed surfaces by forced application incl bituminous primer confirming ot IS-3384 applied @ 0.3 ltr/Sqm and applying aluminium paint @ 100 ml/Sqm complete all as specified and directed. Four course of roof treatment consist of as under:- (a) Applying one coat of bituminous primer conforming to IS 3384 @ 0.3 ltr/Sqm. (b) Applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm. (c) Laying of APP based membrane as specified thickness and weight. (d) Applying one coat of aluminium paint @ 100ml/Sqm.

Supply only intergal water proofing compond

Taking down cement or cement lime plaster of any description from walls, including racking out joints hacking for key scrubbing down with water etc , complete all as specified.

M&L 10 mm thick internal plaster in CM 1:6 on faces of walls, finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 5 mm thick plaster in CM 1:4 on ceiling surfaces including three coat of white wash over newly plastered surfaces complete all as specified and as directed

M&L preparing new plastered surfaces of walls and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed

Material and labour for preparation of old wall surfaces by complete removal of existing treatment, preparing wall surfaces and applying two coat of oil bound distemper with 2 mm thick wall care putty complete all as specified and as directed

M & L two coat of synthetic enamel paint over old painted steel surfaces, over 10cm in width or girth, not otherwise described including preparation of new or previously un treated surfaces complete all as speciified and as directed

Material and labour for preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as secified and directed.

Taking down chowkhats or frame not exceeding 1.5 Sq.m each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified.

Taking down chowkhats or frame exc 1.5 sqm but n.exc 4 sqm each with shutter(s) (without taking off shutters from the frame), complete all as specified.

S & F 5.5 mm sheet glass, ordinary quality with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers and glazing with aluminium beads in square exc 0.5 sq.m in each pane complete all as specified and as directed

S & F 4 mm sheet glass, ordinary quality with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers and glazing with aluminium beads in square exc 0.5 sq.m in each pane complete all as specified and as directed

M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame work

S & F Door closer hydraulically regulated No 3, universal type,suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed (Aluminium extruded section body) complete all as specified and as directed

S&F 9mm thick pre laminated particle boards exterior grade, prelaminated both sides with decorative choice laminations fixed in aluminium partitions/doors with rubber bearings complete all as specified and as directed

S & F in repairs stinless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless wire staples complete all as specified and as directed

M&L for 40mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floors/paving finishing the surface even & smooth without using extra cement concerete complete all as specified and directed.

S & F glass dividing strips, 3 mm thick inserted in position with width of strip 38 mm , conform to design complete all as specified and as directed

S&F 2mm PVC sheets, laminated plain colured fixed in floor/skirting with approved rubber based adhesive complete all as specified and directed.

Demolition of cement (reinforced) in roofs, floors (other than ground floor),beams, staircases, landind, chajjas and similar suspended work complete all as directed

S & F 1.00 mm thick galvanised plain mild steel sheeting in ridges, hips, velly gutters, drips and straight flashings (length and grith as fixed) with grade of zinc coating 275, fixed with L or J hooks in roofs complete all as specified and as directed

S & F Mild steel work as a wind ties for roof including securing bolts, equal angles, posts and struts in fencing including cutting tops to shape as directed,drilling holes, notching for wire, etc confirming to Fe 410 -O or Fe 310-0, complete all as specified and directed by Engineer-in-Charge

M&L for UPVC pipes (SCH-40) in any length 150mm dia pipe including all necessary fittings and clamps including taking down old unserviceable pipes complete all as specified and as directed

M&L for shoe for UPVC pipes (SCH-40) 150mm dia pipe complete all as specified

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet rein forced with MS square bar tube, supply and fix in opening as per specification

S & F factory made Solid Panel PVC shutters 30mm thick ( Style ) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC Sheet strip of 20mm width stuck inside with solvent cement for stikes and plain colour PVC sheets for to prail lock rail and bottom rail on eithes side and as gap insert for top rail and bottom rail. paneling of plain colour PVC Sheet to be filled in the MS frame weldedn / seded to the stil and rails with suitable PVC Sheet beading and joined together with Solvent Cement Supplying and fixing in frame at site as per specification and drawing.

S & F Butt hinges, 100mm size extruded aluminium alloy with Galvanised mild steel hinge pin, anodised and fixed type B-21 complete

S & F Aluminium anodised barrel tower bolts 150mm long complete

S & F Aluminium handles, cast type anodised oval or 'D' type of size 150mm complete

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises.

M&L coloured Non Skid Joint less ceramic tiles (non-skid) of size 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed Make: kaiaria / orient / somani /Bell/Johnson

M&L coloured glazed ceramic tiles joint free of size 350mm x 250mm x7mm/ 450mm x 350mm x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed . Make: Kajaria / Orient / Somani / Bell/Johnson

S&F steel water tubing medium grade 15mm bore galvanized with all fittings and fixed to walls and ceiling or laid in floors including cutting chases where required including taking out old unserviceable steel tubing complete all as specified. Make: Tata/ Jindal/Ravindra

S&F steel water tubing medium grade 20mm bore galvanized with all fittings and fixed to walls and ceiling or laid in floors including cutting chases where required including taking out old unserviceable steel tubing complete all as specified. Make: Tata/ Jindal/Ravindra

S&F in repairs Chromium plated bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe any description complete all as specified and directed. Make: Gem / Parko /Hansa / Soma / Jindal

S&F in repairs Stop valve or angle cock cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of bore 15mm fixed as in repairs. Make: Bir / Leader / Kirloskar.

S&F in repairs Vitreous china ware water closet Orissa pattern including 'P' or 'S' trap connecting to trap and to flushing pipe anti Syphonage pipe etc completewith foot rest of size 580mm X 440mm ((jointed with epoxy raison to glazed trap)including provision of lime concrete bedding complete all as specified. Make: Hindware / cera / Parryware.

S&F in repairs PVC low level flushing cistern of cap 10 ltrs including PVC flush pipe for squatting pan fixed to wall ISI marked completed with brackets and accessories fixed as in repairs and making good to disturbed portion complete, Make: Hindware / Cera / Parryware.

S&F in repairs rotational moulded polythene water storage tanks double layers ( cylinder each vertical with closed top) of capacity 1000 ltrs, hoisted and fixed in position includind disconnecting existing tanks of any description all as, specified in SSR Pt-1 Make: Sintex /frontier / polycon

S&F in repairs ball brass valve high pressure with polythene float and fly out nut, screwed for iron pipe or brass ferrule and fixed to dia of pipe 25mm complete all as specified.

S&F vitreous china counter top wash basin in rectangle / oval shape,white of size 560x460mm placed on granite platform complete all as specified and as directed

S&F Pillar tap fancy type cast copper alloy, with capstan head chromium plated,screwed down high pressure, with or without letter 'Hot' or cold with long screwed shanks and fly nut screwed for iron pipe of bore 15mm , complete all as specified and directed by Engineer-ln-Charge weight of pillar tap shall not be less than 665gms) . Make : Prayag/ Parryware/ Jaguar

Dismantling of 100 mm bore cast iron pipes , jointed in cement mortar or lead Joint from walls/trenches complete

Dismantling of 75 mm bore cast iron pipes , jointed in cement mortar or lead Joint from walls/trenches complete

S & F PVC (SWR) pipes of bore 75mm single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S & F PVC (SWR) pipes of bore 110 mm single socketed in any length with rubber ring joints in any length, laid in trenches or in floors complete all as specified and as directed

S & F PVC (SWR) pipes of bore 75 mm single socketed in any length with rubber ring joints in any length, laid in trenches or in floors complete all as specified and as directed

S & F PVC SWR bends of size 110 mm

S & F PVC SWR bends of size 75 mm

S & F 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent complete all as speciifed and as directed.

S & F 75 mm PVC (SWR) vent cowl complete all as speciifed and as directed.

S&F in repairs 450mm long PVC connection with PTMT check nuts for 15mm bore pipes of approved quality complete

S&F in repairs soap dish fixed to plugs with chromium plated brass screws complete

S&F Vitreous china urinal, CERA new magnum, catalog No. C0575 or Equivalent , white bowl type large, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws pointing around urinals back in cement etc., complete all as directed

S & F steel tube connections fancy type with brass ferrules for urinals connecting from stop / push cock to urinal spreader

S & F urinal spreader of brass chromium plated stuitable for large type urinals

S & F in repairs Vitreous china urinal partition white of size 310 x700mm Make : Hindware / Cera / Parryware

S&F aluminium anodised tubular towel rail 20mm dia, D type 60cm long between flanges complete all as specified and as directed

S&F granite slabs 20mm thick, table rubbed and polished, fixed independently to walls duly supported with partition walls, made to shape as directed at site, including nosing of edges,rounding the edges whereever required complete as in platform for oval shaped countertop wash basin complete all as specified and as directed

Taking down the existing steel rolling shutters from brackets with connecting rod for servicing and fixing only suspension shaft of 50mm dia Gl pipe heavy grade, helical springs, bearings etc., servicing for free movement and smooth function of rolling shutter and fixing unit in original position etc., complete, area not exc 10 Sqm each complete all as specified and as directed

Taking down the existing steel rolling shutters from brackets with connecting rod for servicing and fixing only suspension shaft of 50mm dia Gl pipe heavy grade, helical springs, bearings etc., servicing for free movement and smooth function of rolling shutter and fixing unit in original position etc., complete, area exc 10 Sqm and n.exc 20 sqm each complete all as specified and as directed

Taking down the existing steel rolling shutters from brackets with connecting rod for servicing and fixing only suspension shaft of 50mm dia Gl pipe heavy grade, helical springs, bearings etc., servicing for free movement and smooth function of rolling shutter and fixing unit in original position etc., complete, area exc 20 sqm each complete all as specified and as directed

Supply only 50 mm dia galvanised iron pipe heavy duty (ISI marked) suitable for suspension shaft for rolling shutter (length exc 2m and not exc 6 m)

Supply only helical spring for counter balancing the rolling shutter made out of high tension springs, 115mm bore and 600mm long complete all as specified and as directed

Supply only bearing for rolling shutter 75 to 100 mm dia (Make :SKF)

M&L steel rolling shutters 1.25mm thick laith, but gear operated type with bevel gear box and crank handle with ball bearing, as specified including top cover,anchouring rod , hasp and staple and one shop coat of primer, erected in position as indicated, complete: push pull or manual type complete all as specified and as directed

S & F anodised aluminium frame/shutters (powder coated) for doors, windows ventilators with one or more rebates including joining cleat, rubber gaskets, locking arrangement for sliding window etc., for fixing complete all as specified.

M&L anodised aluminium anodised (powder coated) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door,aluminum hinges, anodised aluminum snap beading screws etc. complete all as specified.

M&L anodised aluminium anodised (powder coated) ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified

M&L anodised aluminium anodised (powder coated) window shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as Beading , Lock complete all as specified

Taking down carefully aluminium point wiring (light,fan, socket or power) complet with fittings such as switch,socker, celing rose and making good the disturbed surfaces of wall/celing ect,complete all as specifed and directed

M&L Point wiring complete with Multi stranded copper conductor size 1.5 sqmm PVC insulated, unsheathed,FRLSH cable , 1100 volts grade conforming to IS 694 multistranded , drawn in and including rigid PVC surface type conduit / casing capping on walls/ floors/ ceiling etcwith and including metal flush boxes of suitable size and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 1.5 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly, cutting chasis to the wall s/ floors/ ceiling and repairing with existing surface after work ,complete all as specified and directed.

One light point /fan point controlled by one switch

All as per ser item No 78 here-in-before, but using 4 sqmm PVC insulated unsheathed, multistranded copper conductor cable with 4 sqmm continuous earth conductor for one 3 pin 15 amps socket outlet on an independent board

Supply and fixing of switch modular 1 way 6 amps, 1 module with frame and cover 230 volts complete all as specified

Supply & fix ceiling rose surface backlite three terminal complete all as directed

Supply and fixing of switch modular 1 way 16 amps, 1 module with frame and cover 230 volts complete all as specified

Supply and fixing of socket modular 6/16 Amps 2/3 pin combined 2 module with frame and cover 230 volts grade complete all as specified

Supplying and fixing fan step regulator 120W 2 module

Supply and fix LED highbay fitting 120Watts energy saving, Environmental friendly circular and robust with tapered fin desgin and excellent thernal management along with IP66 protection with suitable brackets on ceiling and necessary modification on the false ceiling including connecting with twin copper conductor of size 2.5sqmm complete all as specified and directed by Engr-in-charge Make; CG , Havells , bajaj ( NOTE: Sub main wiring 2.5 sq mm)

Supply & fixing only LED batten with aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & intregrated electronic driver1 x 20 watts fixing on wall/ celing complete all as specified as directed.

S&F SPN MCBs distribution board of sheet metal enclosure factory made double door powder coated single pole and neutral with 200 amps rated bus bar 4 way 240 Volts all a specified and directed.

S& F MCB SPN 32 Amps 10 KA capacity 240 Volts all as directed Make :- Indo Asian C&S /CG/Legrand

S& F MCB single pole 6 to 32 Amps 10 KA capacity 240 Volts all as directed Make :- Indo Asian C&S /CG/Legrand

Supply and fixing Distribution board Power line Vertical TPN MCCB DBs with IP 54 Protection metal door 415 volts, suitable copper bus bar each phase 8 way with double door fixed on flush to the wall including making the hole in th wall and fixing the DB including cement work and plastering complete including comprising the following all as specified and as directed.

S & F MCCB with thermal magnetic release 415 volts 3 pole 100 Amps capacity and breaking capacity 16 KA complete

M&L for submain wiring with 2 runs of 4.0 sqmm single core PVC insulated stranded copper conductor cable drawn through suitable rigid non metallic PVC conduit with one run of 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and necessary connections all as directed. Note : 2 runs of 4 sqmm PVC insulated unsheathed copper conductor and 1 run of 4.0sqmm PVC insulated unsheathed copper conductor and 1 run of PVC conduit will be measured as single run

M&L for submain wiring of 4 run 6 Sqmm size PVC insulated unsheathed multistranded copper conductor 1100 Volts FRLS grade drawn through and including suitable size of PVC casing capping/conduit accessories concealed in wall/roof including two run of 6 Sqmm PVC insulated multistranded copper wire for earth, ISI marked and connecting up complete including removing old unserviceable cables all as specified and directed by Engr-in-charge.Note: Four run of 6 sqmm copper cable two run earth wire 6 sqmm wire conduit shall be measuerd and paid as one RM

M & L for taking down existing old/existing ceiling fan / exhaust fan any sweep from the ceiling and re fixing ceiling fan/ Exhaust fan any sweep on ceiling/ wall after reparing/servicing in work shop by rewinding/servicing and replacement of bush, bearing, rubber bush, nuts, bolts and washers, and small spares as required and making ceiling fan serviceable including three core flexible wire from ceiling rose to fan all as specified and as directedkept in safe custody and making good the disturbed surfaces of ceiling etc complete all as specified and as directed.

Supply & fix LED mirror optic tube light surface and wall mounting batten with polycarbonate housing & intergrated electronic drive along with fixture 1 x 10 W

Supply and fix entire drum assembly, consisting of round pipe, brackets, flange assembly, roller chains etc,automated with suitable motor and starter for lifting of capacity 1500 kg Jielong Rolling Shutter complete kit all as specified and directed by Engr-in-charge. Size of rolling shutter required - Width 15 feet and height 15 feet

Earthing complete with 600x600x6.00MM thick GI earth plate electrode buried directly in ground not less than 2.25 mtr below GL with the top edge of the plate at a depth not less than 1.5 mtr from GL, connected to GI earth lead of 4.0 mm dia by means of nuts, bolts, washers, checknuts etc, made out of galvanised iron or steel, earth wire protected by galvanised iron pipe, connected to main switch board complete including necessary earth work, excavation, PCC chamber, watering pipe, funnel, wire mesh, RCC chamber cover etc all as specified and directed in EP No:3 of SSR Part-I

M/S Suresh Raju

Meghana and Gowda Enterprises

ANAND REFRIGERATION