Repairs and Maintanance to the Ward Office Building at Erumapalayam Main road in D.No. 43. Ammapet Ward Office in Salem Corporation

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") including cost of materials and labour charges etc. as per std. specification - 1m3

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P-Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with best synthetic enamel paint of approved Colour for new iron works the rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with standard specification(paint should be got approved by the Departmental Engineer befor use on work.

Supplying and fixing of metal coated sheets Aluminium zinc alloy (Galvalurne) in Gms/sqm total of Both sides AZ 1:50 as per ASTMA 792 ог AS 1397) in Roofing of not less than 0.50mm thickness (over all). The material shall have yield stress of 550 mega Pascal for the sheets width including lip as side tap and 150mm as longitudinal lap for earth sheet with fixing accessories like self drilling screws caps having EDPM (Ethylene proyiene Di Monama) washers, PVC caps of matching colour with roofing sheets duly coating the sheets with top polyester coating with woth medium glass of egg shell finish of 20 micron thickness over a back and primer coat of 5 to 10 micron, each duly getting the colour scheme of sheets approved including all leads and lift etc, complete and as directed by the Engineer-in-charge (All labour and materials by the contractor) Note: Payment shall be made for the laid area and NO extra payment shall be made for overlaps

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condenser with conduit pipe suspension from the ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting with tube (SD 89)